I.S. EN ISO 17916:2016
Current
The latest, up-to-date edition.
SAFETY OF THERMAL CUTTING MACHINES (ISO 17916:2016)
Hardcopy , PDF
English
01-01-2016
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
National Foreword
European foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Significant hazards
5 Safety requirements and protective measures
6 Information for use
Annex A (informative) - Examples of hazards, hazardous
situations, and hazardous events
Annex B (informative) - Calculation examples for dimensioning
of exhaust systems
Annex C (informative) - Example for the lower limit of
protective devices
Annex D (informative) - Example for calculation of the
compression corresponding to the acceptable
maximum force in case of collision between the machine
and a human body
Annex E (normative) - Measurement of the air velocity at the
entrance plane of the cutting table
Bibliography
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU Directive
2006/42/EC on machinery
Defines the safety requirements and measures for machinery covering design, construction, production, transport, installation, operation, maintenance, and putting out of service.
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Standards | Relationship |
ISO 17916:2016 | Identical |
EN ISO 17916:2016 | Identical |
ISO 13855:2010 | Safety of machinery — Positioning of safeguards with respect to the approach speeds of parts of the human body |
ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
ISO 5172:2006 | Gas welding equipment Blowpipes for gas welding, heating and cutting Specifications and tests |
ISO 9539:2010 | Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes |
EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
ISO 5171:2009 | Gas welding equipment Pressure gauges used in welding, cutting and allied processes |
ISO 14122-1:2016 | Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed means and general requirements of access |
ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
ISO 8206:1991 | Acceptance tests for oxygen cutting machines — Reproducible accuracy — Operational characteristics |
ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
EN 1256:2006 | Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes |
IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
EN 874 : 1995 | GAS WELDING EQUIPMENT - OXYGEN/FUEL GAS BLOWPIPES (CUTTING MACHINE TYPE) OF CYLINDRICAL BARREL - TYPE OF CONSTRUCTION, GENERAL SPECIFICATIONS, TEST METHODS |
EN 50178:1997 | Electronic equipment for use in power installations |
ISO 7291:2010 | Gas welding equipment Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) |
IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
ISO/TR 28821:2012 | Gas welding equipment Hose connections for equipment for welding, cutting and allied processes Listing of connections which are either standardised or in common use |
ISO 8207:1996 | Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes |
IEC 62079:2001 | Preparation of instructions - Structuring, content and presentation |
ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
EN 12198-1:2000+A1:2008 | Safety of machinery - Assessment and reduction of risks arising from radiation emitted by machinery - Part 1: General principles |
ISO 7289:2010 | Gas welding equipment Quick-action couplings with shut-off valves for welding, cutting and allied processes |
EN 730-1:2002 | Gas welding equipment - Safety devices - Part 1: Incorporating a flame (flashback) arrestor |
ISO 5175:1987 | Equipment used in gas welding, cutting and allied processes Safety devices for fuel gases and oxygen or compressed air General specifications, requirements and tests |
ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
ISO 9090:1989 | Gas tightness of equipment for gas welding and allied processes |
ISO 11553-1:2005 | Safety of machinery Laser processing machines Part 1: General safety requirements |
EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.