I.S. EN ISO 8230-3:2008
Current
The latest, up-to-date edition.
SAFETY REQUIREMENTS FOR DRY-CLEANING MACHINES - PART 3: MACHINES USING COMBUSTIBLE SOLVENTS
Hardcopy , PDF
English
01-01-2008
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Safety requirements and/or protective measures
5 Verification of the safety requirements and/or
protective measures
6 Information for use
Annex ZA (informative) Relationship between this International
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) Relationship between this International
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Specifies safety requirements for dry-cleaning machines that use a combustible solvent (CS), as defined in ISO 8230-1, as their cleaning medium.
| DevelopmentNote |
Supersedes I.S. EN ISO 8230. (11/2008)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 8230-3:2008 | Identical |
| EN ISO 8230-3:2008 | Identical |
| EN 50037 : 1987 | LOW VOLTAGE SWITCHGEAR & CONTROLGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES, FORM C FOR ALTERNATING CURRENT, 2 TERMINALS |
| EN 1127-1:2011 | Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology |
| EN 50033 : 1991 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - CAPLIGHTS FOR MINES SUSCEPTIBLE TO FIREDAMP |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 50104:2010 | Electrical apparatus for the detection and measurement of oxygen - Performance requirements and test methods |
| EN 14756:2006 | Determination of the limiting oxygen concentration (LOC) for flammable gases and vapours |
| EN 50039:1980 | Electrical apparatus for potentially explosive atmospheres - Intrinsically safe electrical systems 'i' |
| EN 50026 : 1987 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES - FORM D FOR DIRECT CURRENT, 3 OR 4 TERMINALS |
| EN 60079-0:2012/A11:2013 | EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
| EN 50020:2002 | Electrical apparatus for potentially explosive atmospheres - Intrinsic safety 'i' |
| EN 13463-1:2009 | Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
| EN 61779-4:2000 | Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN 50035 : 1978 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS - G-PROFILE FOR THE FIXING OF TERMINAL BLOCKS |
| EN 50017:1998 | Electrical apparatus for potentially explosive atmospheres - Powder filling "q" |
| EN 50019:2000/corrigendum Apr. 2003 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - INCREASED SAFETY "E" |
| EN 50025 : 1987 | LOW VOLTAGE SWITCHGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES - FORM C, FOR DIRECT CURRENT, 3 OR 4 TERMINALS |
| EN 50032 : 1980 | LOW VOLTAGE SWITCHGEAR & CONTROLGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES - DEFINITIONS, CLASSIFICATION & DESIGNATION |
| EN 50018 : 2000 AMD 1 2002 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - FLAMEPROOF ENCLOSURE "D" |
| ISO 8230-1:2008 | Safety requirements for dry-cleaning machines Part 1: Common safety requirements |
| EN 50021 : 99 COR 2000 | ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - TYPE OF PROTECTION "N" |
| EN 50038 : 1987 | LOW VOLTAGE SWITCHGEAR & CONTROLGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES, FORM D FOR ALTERNATING CURRENT, 2 TERMINALS |
| EN 50036 : 1987 | LOW VOLTAGE SWITCHGEAR & CONTROLGEAR FOR INDUSTRIAL USE - INDUCTIVE PROXIMITY SWITCHES, FORM A, ALTERNATING CURRENT, 2 TERMINALS |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 61779-1 : 2000 AMD 11 2004 | ELECTRICAL APPARATUS FOR THE DETECTION AND MEASUREMENT OF FLAMMABLE GASES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 50022 : 1977 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS - TOP HAT RAILS 35mm WIDE FOR SNAP-ON MOUNTING OF EQUIPMENT |
| EN 50015:1998 | Electrical apparatus for potentially explosive atmospheres - Oil immersion "o" |
| EN 50016:2002 | Electrical apparatus for potentially explosive atmospheres - Pressurized apparatus "p" |
| EN 50034 : LATEST | |
| EN 50028:1987 | Electrical apparatus for potentially explosive atmospheres - Encapsulation 'm' |
| EN 50023 : 1977 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS - TOP HAT RAILS 75mm WIDE FOR SNAP-ON MOUNTING OF EQUIPMENT |
| EN 50024 : 1978 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - MOUNTING RAILS - C-PROFILE AND ACCESSORIES FOR THE MOUNTING OF EQUIPMENT |
| EN 50030 : LATEST | |
| EN 50027 : 1979 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - TERMINAL APERTURE SIZES FOR UNPREPARED ROUND COPPER CONDUCTORS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.