I.S.EN ISO 8528-13:2016&LC:2016
Current
Current
The latest, up-to-date edition.
RECIPROCATING INTERNAL COMBUSTION ENGINE DRIVEN ALTERNATING CURRENT GENERATING SETS - PART 13: SAFETY (ISO/DIS 8528-13:2014)
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-11-2016
Publisher
€76.00
Excluding VAT
National Foreword
European foreword
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Hazards
6 Safety requirements and tests
7 Operating and maintenance instructions
8 Safety labels
9 Marking
Annex A (normative) - List of hazards
Annex B (normative) - Application of IEC 60204-1:2009
for generating sets
Annex C (normative) - Instruction manual - Safety guide
additional requirements for low-power generating
sets for use by laymen
Bibliography
Annexe ZA (informative) - Relationship between this
European Standard and the Essential Requirements
of EU Directive 2006/42/EC
Defines the safety requirements for reciprocating Internal combustion (RIC) engine driven generating sets up to 1000 V consisting of an RIC engine, an alternating current (AC) generator including the additional equipment required for operating, e.g. controlgear, switchgear, auxiliary equipment.
| Committee |
TC 70
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 8528-13:2016 | Identical |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| IEC 61310-2:2007 | Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking |
| ISO/TR 11688-1:1995 | Acoustics — Recommended practice for the design of low-noise machinery and equipment — Part 1: Planning |
| ISO 8528-8:2016 | Reciprocating internal combustion engine driven alternating current generating sets — Part 8: Requirements and tests for low-power generating sets |
| ISO 8528-3:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 3: Alternating current generators for generating sets |
| ISO 8528-2:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 2: Engines |
| ISO 2710-1:2000 | Reciprocating internal combustion engines — Vocabulary — Part 1: Terms for engine design and operation |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 7967-9:2010 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 9: Control and monitoring systems |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 8528-6:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 6: Test methods |
| ISO 7967-4:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 4: Pressure charging and air/exhaust gas ducting systems |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| ISO 8528-5:2013 | Reciprocating internal combustion engine driven alternating current generating sets — Part 5: Generating sets |
| ISO 7967-1:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 1: Structure and external covers |
| ISO 8999:2001 | Reciprocating internal combustion engines — Graphical symbols |
| ISO 11102-1:1997 | Reciprocating internal combustion engines — Handle starting equipment — Part 1: Safety requirements and tests |
| ISO 8528-4:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 4: Controlgear and switchgear |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| ISO 7967-8:2005 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 8: Starting systems |
| ISO 7967-3:2010 | Reciprocating internal combustion engines — Vocabulary of components and systems — Part 3: Valves, camshaft drives and actuating mechanisms |
| ISO 14314:2004 | Reciprocal internal combustion engines — Recoil starting equipment — General safety requirements |
| ISO 11429:1996 | Ergonomics — System of auditory and visual danger and information signals |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
| ISO 8528-9:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 9: Measurement and evaluation of mechanical vibrations |
| IEC 60364-3:1993 | Electrical installations of buildings - Part 3: Assessment of general characteristics |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| ISO 13857:2008 | Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ISO 8528-7:2017 | Reciprocating internal combustion engine driven alternating current generating sets — Part 7: Technical declarations for specification and design |
| ISO 8528-1:2005 | Reciprocating internal combustion engine driven alternating current generating sets — Part 1: Application, ratings and performance |
| ISO 3046-1:2002 | Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| ISO 13850:2015 | Safety of machinery — Emergency stop function — Principles for design |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 6826:1997 | Reciprocating internal combustion engines — Fire protection |
| IEC 60947-2:2016 | Low-voltage switchgear and controlgear - Part 2: Circuit-breakers |
| ISO 14122-2:2016 | Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
| ISO 15534-2:2000 | Ergonomic design for the safety of machinery — Part 2: Principles for determining the dimensions required for access openings |
| ISO 3046-3:2006 | Reciprocating internal combustion engines — Performance — Part 3: Test measurements |
| ISO 2261:1994 | Reciprocating internal combustion engines — Hand-operated control devices — Standard direction of motion |
| ISO 11102-2:1997 | Reciprocating internal combustion engines — Handle starting equipment — Part 2: Method of testing the angle of disengagement |
| ISO 11684:1995 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Safety signs and hazard pictorials — General principles |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.