ICC 2012 INTERNATIONAL FIRE CODE : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INTERNATIONAL FIRE CODE
Hardcopy , PDF
06-08-2020
English
01-01-2012
CHAPTER 1 - SCOPE AND ADMINISTRATION
CHAPTER 2 - DEFINITIONS
CHAPTER 3 - GENERAL REQUIREMENTS
CHAPTER 4 - EMERGENCY PLANNING AND PREPAREDNESS
CHAPTER 5 - FIRE SERVICE FEATURES
CHAPTER 6 - BUILDING SERVICES AND SYSTEMS
CHAPTER 7 - FIRE-RESISTANCE-RATED CONSTRUCTION
CHAPTER 8 - INTERIOR FINISH, DECORATIVE MATERIALS
AND FURNISHINGS
CHAPTER 9 - FIRE PROTECTION SYSTEMS
CHAPTER 10 - MEANS OF EGRESS
CHAPTER 11 - CONSTRUCTION REQUIREMENTS FOR
EXISTING BUILDINGS
CHAPTER 20 - AVIATION FACILITIES
CHAPTER 21 - DRY CLEANING
CHAPTER 22 - COMBUSTIBLE DUSTPRODUCING
OPERATIONS
CHAPTER 23 - MOTOR FUEL-DISPENSING FACILITIES
AND REPAIR GARAGES
CHAPTER 24 - FLAMMABLE FINISHES
CHAPTER 25 - FRUIT AND CROP RIPENING
CHAPTER 26 - FUMIGATION AND INSECTICIDAL FOGGING
CHAPTER 27 - SEMICONDUCTOR FABRICATION FACILITIES
CHAPTER 28 - LUMBER YARDS AND WOODWORKING FACILITIES
CHAPTER 29 - MANUFACTURE OF ORGANIC COATINGS
CHAPTER 30 - INDUSTRIAL OVENS
CHAPTER 31 - TENTS AND OTHER MEMBRANE STRUCTURES
CHAPTER 32 - HIGH-PILED COMBUSTIBLE STORAGE
CHAPTER 33 - FIRE SAFETY DURING CONSTRUCTION AND
DEMOLITION
CHAPTER 34 - TIRE REBUILDING AND TIRE STORAGE
CHAPTER 35 - WELDING AND OTHER HOT WORK
CHAPTER 36 - MARINAS
CHAPTER 50 - HAZARDOUS MATERIALS-GENERAL PROVISIONS
CHAPTER 51 - AEROSOLS
CHAPTER 52 - COMBUSTIBLE FIBERS
CHAPTER 53 - COMPRESSED GASES
CHAPTER 54 - CORROSIVE MATERIALS
CHAPTER 55 - CRYOGENIC FLUIDS
CHAPTER 56 - EXPLOSIVES AND FIREWORKS
CHAPTER 57 - FLAMMABLE AND COMBUSTIBLE LIQUIDS
CHAPTER 58 - FLAMMABLE GASES AND FLAMMABLE
CRYOGENIC FLUIDS
CHAPTER 59 - FLAMMABLE SOLIDS
CHAPTER 60 - HIGHLY TOXIC AND TOXIC MATERIALS
CHAPTER 61 - LIQUEFIED PETROLEUM GASES
CHAPTER 62 - ORGANIC PEROXIDES
CHAPTER 63 - OXIDIZERS, OXIDIZING GASES AND OXIDIZING
CRYOGENIC FLUIDS
CHAPTER 64 - PYROPHORIC MATERIALS
CHAPTER 65 - PYROXYLIN (CELLULOSE NITRATE) PLASTICS
CHAPTER 66 - UNSTABLE (REACTIVE) MATERIALS
CHAPTER 67 - WATER-REACTIVE SOLIDS AND LIQUIDS
CHAPTER 80 - REFERENCED STANDARDS
APPENDIX A - BOARD OF APPEALS
APPENDIX B - FIRE-FLOW REQUIREMENTS FOR BUILDINGS
APPENDIX C - FIRE HYDRANT LOCATIONS AND DISTRIBUTION
APPENDIX D - FIRE APPARATUS ACCESS ROADS
APPENDIX E - HAZARD CATEGORIES
APPENDIX F - HAZARD RANKING
APPENDIX G - CRYOGENIC FLUIDS-WEIGHT AND VOLUME
EQUIVALENTS
APPENDIX H - HAZARDOUS MATERIALS MANAGEMENT PLAN
(HMMP) AND HAZARDOUS MATERIALS INVENTORY
STATEMENT (HMIS) INSTRUCTIONS
APPENDIX I - FIRE PROTECTION SYSTEMS-NONCOMPLIANT
CONDITIONS
APPENDIX J - BUILDING INFORMATION SIGN
INDEX
Establishes regulations affecting or relating to structures, processes, premises and safeguards regarding: 1. The hazard of fire and explosion arising from the storage, handling or use of structures, materials or devices; 2. Conditions hazardous to life, property or public welfare in the occupancy of structures or premises; 3. Fire hazards in the structure or on the premises from occupancy or operation; 4. Matters related to the construction, extension, repair, alteration or removal of fire suppression or alarm systems; and 5. Conditions affecting the safety of fire fighters and emergency responders during emergency operations.
DocumentType |
Standard
|
Pages |
541
|
PublisherName |
International Code Council (ICC)
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
NEMA SB 11 : 2011 | GUIDE FOR PROPER USE OF SYSTEM SMOKE DETECTORS |
ICC 2012 INTERNATIONAL PERFORM. CODE : 2012 | ICC PERFORMANCE CODE FOR BUILDINGS AND FACILITIES |
CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
ICC 2012 INT. EXIST. BUILDING CODE : 2012 | INTERNATIONAL EXISTING BUILDING CODE |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
ICC 2012 INT. WILDLAND U.I. CODE : 2012 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
ICC 2012 INT. ENERGY CONSV. CODE : 2012 | INTERNATIONAL ENERGY CONSERVATION CODE |
ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
CSA HGV 4.7:2013:(R2018) | AUTOMATIC VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
CSA HGV 4.1 : 2013 | STANDARD FOR HYDROGEN DISPENSING SYSTEMS |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
PIP PNE00003 : 2013 | PROCESS UNIT AND OFFSITES LAYOUT GUIDE |
NFPA 430 : 2004 | STORAGE OF LIQUID AND SOLID OXIDIZERS |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
ASTM E 1537 : 2016 : REDLINE | Standard Test Method for Fire Testing of Upholstered Furniture |
UL 1313:3ED 2015-12-16 | Standard for Nonmetallic Safety Cans for Petroleum Products |
NFPA 22 : 2013 | WATER TANKS FOR PRIVATE FIRE PROTECTION |
NFPA 495 : 2013 | EXPLOSIVE MATERIALS CODE |
NFPA 2001 : 2015 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
NFPA 750 : 2015 | WATER MIST FIRE PROTECTION SYSTEMS |
UL 2360:1ED 2000-05-10 | Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction |
CFR 33(PTS1-199) : JUL 89 | NAVIGATION AND NAVIGABLE WATERS |
NFPA 25 : 2017 | INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS |
CGA V 1 : 2013 | STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS |
NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
CFR 40(PTS300-399) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
NFPA 241 : 2013 | SAFEGUARDING CONSTRUCTION, ALTERATION, AND DEMOLITION OPERATIONS |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
BHMA A156.19 : 2013 | POWER ASSIST AND LOW ENERGY POWER OPERATED DOORS |
NFPA 701 : 2015 | FIRE TESTS FOR FLAME PROPAGATION OF TEXTILES AND FILMS |
NFPA 34 : 2015 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
UL 864:10ED 2014-12-01 | Standard for Control Units and Accessories for Fire Alarm Systems |
NFPA 110 : 2016 | EMERGENCY AND STANDBY POWER SYSTEMS |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
UL 2335:2ED 2010-07-28 | Fire Tests of Storage Pallets |
UL 2208:3ED 2010-07-08 | Standard for Solvent Distillation Units |
NFPA 505 : 2013 | FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS |
NFPA 703 : 2018 | FIRE RETARDANT-TREATED WOOD AND FIRE-RETARDANT COATINGS FOR BUILDING MATERIALS |
NFPA 101 : 2018 | LIFE SAFETY CODE |
API 2000 : 2014 | VENTING ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
UL 305:6ED 2012-07-12 | Panic Hardware |
UL 900:8ED 2015-04-21 | Air Filter Units |
API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
NFPA 170 : 2018 | FIRE SAFETY AND EMERGENCY SYMBOLS |
NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
UL 2200:2ED 2012-06-01 | Standard for Stationary Engine Generator Assemblies |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
CFR 16(PTS1000-END) : 0 | COMMERCIAL PRACTICES - FEDERAL TRADE COMMISSION - CONSUMER PRODUCT SAFETY COMMISSION |
NFPA 13R : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN LOW-RISE RESIDENTIAL OCCUPANCIES |
CGA P 18 : 2013 | STANDARD FOR BULK INERT GAS SYSTEMS |
API 2003 : 2015 | PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
NFPA 1127 : 2018 | CODE FOR HIGH POWER ROCKETRY |
ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
NFPA 498 : 2013 | SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES |
ASTM E 108 : 2017 : REDLINE | Standard Test Methods for Fire Tests of Roof Coverings |
ICC 2012 INTERNATIONAL MECH. CODE : 2012 | INTERNATIONAL MECHANICAL CODE |
UL 2079:5ED 2015-08-26 | Tests for Fire Resistance of Building Joint Systems |
ASTM E 2573 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics |
CGA P 1 : 2015 | STANDARD FOR SAFE HANDLING OF COMPRESSED GASES IN CONTAINERS |
ASTM D 86 : 2017-06 | TEST METHOD FOR DISTILLATION OF PETROLEUM PRODUCTS AND LIQUID FUELS AT ATMOSPHERIC PRESSURE |
NFPA 33 : 2016 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
ANSI/BHMA A156.10 : 2017 | POWER OPERATED PEDESTRIAN DOORS |
API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
NFPA 289 : 2013 | STANDARD METHOD OF FIRE TEST FOR INDIVIDUAL FUEL PACKAGES |
NFPA 1123 : 2018 | Code for Fireworks Display<br> |
NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
NFPA 24 : 2016 | INSTALLATION OF PRIVATE FIRE SERVICE MAINS AND THEIR APPURTENANCES |
ASTM E 2404 : 2017 : REDLINE | Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) and Wood Wall or Ceiling Coverings, Facings and Veneers, to Assess Surface Burning Characteristics |
UL 2075:2ED 2013-03-05 | Gas and Vapor Detectors and Sensors |
ASME A17.1-2016/CSA B44-16 | Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
ICC A117.1 : 2009 | ACCESSIBLE AND USABLE BUILDINGS AND FACILITIES |
NFPA 15 : 2017 | WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION |
UL 1975:3ED 2006-11-27 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
UL 1037:6ED 2016-09-09 | Antitheft Alarms and Devices |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
ISO 8115:1986 | Cotton bales Dimensions and density |
NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
ASTM E 2072 : 2014 : REDLINE | Standard Specification for Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2023) |
NFPA 1122 : 2018 | CODE FOR MODEL ROCKETRY |
API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
CGA P 20 : JUNE 2017 | STANDARD FOR CLASSIFICATION OF TOXIC GAS MIXTURES |
NFPA 92B : 2009 | SMOKE MANAGEMENT SYSTEMS IN MALLS, ATRIA, AND LARGE SPACES |
NFPA 14 : 2016 | INSTALLATION OF STANDPIPE AND HOSE SYSTEMS |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
NFPA 86 : 2015 | OVENS AND FURNACES |
ASTM B 88 : 2016 : REDLINE | Standard Specification for Seamless Copper Water Tube |
NFPA 1142 : 2017 | WATER SUPPLIES FOR SUBURBAN AND RURAL FIRE FIGHTING |
ASTM F 2200 : 2017 : REDLINE | Standard Specification for Automated Vehicular Gate Construction |
NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
NFPA 260 : 2013 | STANDARD METHODS OF TESTS AND CLASSIFICATION SYSTEM FOR CIGARETTE IGNITION RESISTANCE OF COMPONENTS OF UPHOLSTERED FURNITURE |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
NFPA 11 : 2016 | LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM |
NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
UL 325:7ED 2017-05-19 | Door, Drapery, Gate, Louver, and Window Operators and Systems |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
NFPA 12 : 2015 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
UL 10C:3ED 2016-06-09 | Positive Pressure Fire Tests of Door Assemblies |
NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
CFR 27(PTS1-399) : APR 2006 | ALCOHOL, TOBACCO PRODUCTS AND FIREARMS - BUREAU OF ALCOHOL, TOBACCO AND FIREARMS, DEPARTMENT OF THE TREASURY |
NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
NFPA 303 : 2016 | FIRE PROTECTION STANDARD FOR MARINAS AND BOATYARDS |
CGA S 1.2 : 2009 | PRESSURE RELIEF DEVICE STANDARDS - PART 2: PORTABLE CONTAINERS FOR COMPRESSED GASES |
API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
NFPA 261 : 2013 | TEST FOR DETERMINING RESISTANCE OF MOCK-UP UPHOLSTERED FURNITURE MATERIAL ASSEMBLIES TO IGNITION BY SMOLDERING CIGARETTES |
API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
NFPA 72 : 2016 | NATIONAL FIRE ALARM AND SIGNALING CODE |
NFPA 13 : 2016 | INSTALLATION OF SPRINKLER SYSTEMS |
NFPA 409 : 2016 | AIRCRAFT HANGARS |
ICC 2012 INT. WILDLAND U.I. CODE : 2012 | INTERNATIONAL WILDLAND-URBAN INTERFACE CODE |
NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
NFPA 265 : 2015 | METHODS OF FIRE TESTS FOR EVALUATING ROOM FIRE GROWTH CONTRIBUTION OF TEXTILE OR EXPANDED VINYL WALL COVERINGS ON FULL HEIGHT PANELS AND WALLS |
ASTM B 43 : 2015 : REDLINE | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
CGA C 7 : 2014 | GUIDE TO CLASSIFICATION AND LABELING OF COMPRESSED GASES |
NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
UL 924:10ED 2016-05-09 | Emergency Lighting and Power Equipment |
NFPA 111 : 2016 | STORED ELECTRICAL ENERGY EMERGENCY AND STANDBY POWER SYSTEMS |
NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
NFPA 51A : 2012 | ACETYLENE CYLINDER CHARGING PLANTS |
ICC 2012 INTERNATIONAL RESI. CODE : 2012 | INTERNATIONAL RESIDENTIAL CODE FOR ONE- AND TWO-FAMILY DWELLINGS |
NFPA 490 : 2002 | CODE FOR THE STORAGE OF AMMONIUM NITRATE |
ASTM E 1590 : 2017 : REDLINE | Standard Test Method for Fire Testing of Mattresses |
NFPA 204 : 2015 | SMOKE AND HEAT VENTING |
CFR 46(PTS1-40) : OCT 2017 | SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION |
UL 2245:2ED 2006-12-28 | Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks |
NFPA 720 : 2015 | INSTALLATION OF CARBON MONOXIDE (CO) DETECTION AND WARNING EQUIPMENT |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
NFPA 16 : 2015 | INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS |
NFPA 790 : 2018 | COMPETENCY OF THIRD-PARTY FIELD EVALUATION BODIES |
EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
ICC 2012 INT. PROPERTY MAINT. CODE : 2012 | INTERNATIONAL PROPERTY MAINTENANCE CODE |
CGA G 1.3 : 70(R1984) | ACETYLENE TRANSMISSION FOR CHEMICAL SYNTHESIS |
NFPA 120 : 2015 | FIRE PREVENTION AND CONTROL IN COAL MINES |
NFPA 211 : 2016 | CHIMNEYS, FIREPLACES, VENTS, AND SOLID FUEL-BURNING APPLIANCES |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
NFPA 12A : 2015 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
CGA P 23 : 2015 | STANDARD FOR CATEGORIZING GAS MIXTURES CONTAINING FLAMMABLE AND NONFLAMMABLE COMPONENTS |
NFPA 13D : 2016 | INSTALLATION OF SPRINKLER SYSTEMS IN ONE- AND TWO-FAMILY DWELLINGS AND MANUFACTURED HOMES |
CGA S 1.3 : 2008 | PRESSURE RELIEF DEVICE STANDARDS - PART 3: STATIONARY STORAGE CONTAINERS FOR COMPRESSED GASES |
ICC 2012 INTERNATIONAL FUEL GAS CODE : 2012 | INTERNATIONAL FUEL GAS CODE |
API 752 : 2009 | MANAGEMENT OF HAZARDS ASSOCIATED WITH LOCATION OF PROCESS PLANT PERMANENT BUILDINGS |
CGA S 1.1 : 2011 | PRESSURE RELIEF DEVICE STANDARDS - PART 1: CYLINDERS FOR COMPRESSED GASES |
NFPA 160 : 2016 | USE OF FLAME EFFECTS BEFORE AN AUDIENCE |
CFR 47(PTS80-END) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
NFPA 20 : 2016 | INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
API 1615 : 2011 | INSTALLATION OF UNDERGROUND PETROLEUM STORAGE SYSTEMS |
NFPA 80 : 2016 | FIRE DOORS AND OTHER OPENING PROTECTIVES |
NFPA 253 : 2015 | STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE |
CFR 49(PTS100-185) : 0 | TRANSPORTATION |
ASTM E 1354 : 2017 : REDLINE | Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
NFPA 105 : 2016 | SMOKE DOOR ASSEMBLIES AND OTHER OPENING PROTECTIVES |
ICC 300 : 2007 | BLEACHERS, FOLDING AND TELESCOPIC SEATING, AND GRANDSTANDS |
API SPEC 12P : 2016 | SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.