IEC 61340-4-1:2003+AMD1:2015 CSV
Current
Current
The latest, up-to-date edition.
Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English - French
Published date
29-04-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.IEC 61340-4-1:2003+A1:2015 Specifies test methods for determining the electrical resistance of all types of floor coverings and installed floors with resistance to ground, point-to-point resistance and vertical resistance of between 104 W and 1013 W. Laboratory evaluations carried out under controlled environmental conditions can be used for classification or quality control purposes. Tests on installed floors under uncontrolled ambient conditions can be used to determine correct installation or as part of an ongoing system verification. The important changes refer only to the specification of test methods but do not contain classification or performance requirements; the test methods refer to resistance measurement, and the specified equipment comply more with those of the other parts of IEC 61340. This consolidated version consists of the second edition (2003) and its amendment 1 (2015). Therefore, no need to order amendment in addition to this publication.
| Committee |
TC 101
|
| DevelopmentNote |
Stability Date: 2017. (05/2015)
|
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61340-4-1 : 2004 AMD 1 2015 | Identical |
| NEN EN IEC 61340-4-1 : 2004 AMD 1 2015 | Identical |
| I.S. EN 61340-4-1:2004 | Identical |
| PN EN 61340-4-1 : 2006 AMD 1 2015 | Identical |
| SN EN 61340-4-1 : 2004 | Identical |
| VDE 0300-4-1 : 2016 | Identical |
| DIN EN 61340-4-1 : 2016 | Identical |
| BS EN 61340-4-1 : 2004 | Identical |
| UNE-EN 61340-4-1:2005 | Identical |
| EN 61340-4-1:2004/A1:2015 | Identical |
| NF EN 50348 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| 15/30329667 DC : 0 | BS EN 61340-4-5 ED. 2.0 - ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| PREN 50050-1 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| 03/317589 DC : 0 | IEC 61340-5-1 ED.2 - ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| BS PD IEC 61340-5-2 : 1999 AMD 13197 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| 11/30248849 DC : 0 | BS EN 50050-3:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| UNE-EN 50050-2:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 2: Hand-held spraying equipment for ignitable coating powder |
| BS EN 61340-5-2:2001 | Electrostatics. Protection of electronic devices from electrostatic phenomena User guide |
| PD IEC/TR 61340-5-2:2018 | Electrostatics Protection of electronic devices from electrostatic phenomena. User guide |
| I.S. EN 50050-1:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| IEC TS 61340-5-2:1999 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| IEC TR 61340-5-2:2018 RLV | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| ISO/TS 19880-1:2016 | Gaseous hydrogen Fuelling stations Part 1: General requirements |
| I.S. EN 50176:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| PD CLC/TR 60079-32-1:2015 | Explosive atmospheres Electrostatic hazards, guidance |
| UNE-EN 50050-3:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| BS EN 13160-1:2003 | Leak detection systems General principles |
| 16/30350625 DC : 0 | BS EN 62485-5 ED 1.0 - SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 5: LITHIUM-ION BATTERIES FOR STATIONARY APPLICATIONS |
| EN 61340-5-1:2016/AC:2017-05 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS (IEC 61340-5-1:2016/COR1:2017) |
| EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| EN 50177:2009/A1:2012 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| EN IEC 62485-2:2018 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| EN 60079-32-2:2015 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| EN 13160-1:2016 | Leak detection systems - Part 1: General Principles |
| EN 50050-3:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
| EN 61340-4-5:2004 | Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| BS EN 60079-32-2:2015 | Explosive atmospheres Electrostatics hazards. Tests |
| 14/30301606 DC : 0 | BS EN 1815 - RESILIENT AND LAMINATE FLOOR COVERINGS - ASSESSMENT OF STATIC ELECTRICAL PROPENSITY |
| 11/30248842 DC : 0 | BS EN 50050-1:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| 08/30180312 DC : DRAFT MAR 2008 | BS EN 50223 - STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| CLC/TR 50404:2003 | Electrostatics - Code of practice for the avoidance of hazards due to static electricity |
| 14/30301251 DC : 0 | BS EN 13160-1 - LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| 10/30230365 DC : 0 | BS EN 50050-2 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| BS EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material. Safety requirements |
| CEI EN 50176 : 2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| S.R. CLC/TR 60079-32-1:2015 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS - GUIDANCE |
| BS EN 50272-2:2001 | Safety requirements for secondary batteries and battery installations Stationary batteries |
| BS EN 50177 : 2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| I.S. EN IEC 61340-4-5:2018 | ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| I.S. EN IEC 62485-2:2018 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| I.S. EN 50177:2009 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE COATING POWDERS - SAFETY REQUIREMENTS |
| I.S. EN 61340-5-2:1999 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| I.S. EN 61340-4-5:2004 | ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERIZING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| I.S. EN 61340-5-1:2016 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| IEC 62485-2:2010 | Safety requirements for secondary batteries and battery installations - Part 2: Stationary batteries |
| UNE-EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| I.S. EN 13160-1:2016 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 438-3:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| I.S. EN 438-4:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| I.S. EN 438-5:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| S.R. CEN TS 14472-1:2003 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - DESIGN, PREPARATION AND INSTALLATION - PART 1: GENERAL |
| VDI 2083 Blatt 18:2012-01 | Cleanroom technology - Biocontamination control |
| VDI 2199:2012-01 | Recommendations for structure planning in the field of operating with industrial trucks |
| VDI 2083 Blatt 5.1:2007-09 | Cleanroom technology - Cleanroom operation |
| CEI CLC/TR 61340-5-2 : 2010 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| CEI EN 50050-2 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| BS PD IEC 61340-2.2 : 2000 | ELECTROSTATICS - PART 2-2: MEASUREMENT METHODS - MEASUREMENT OF CHARGEABILITY |
| PD CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| BS EN 50050-2:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable coating powder |
| 11/30248856 DC : 0 | BS EN 50059:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| BS PD CEN/TR 16832 : 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| 06/30149721 DC : DRAFT APR 2006 | IEC 62257-8-1 - RECOMMENDATIONS FOR SMALL RENEWABLE ENERGY AND HYBRID SYSTEMS FOR RURAL ELECTRIFICATION - PART 8-1: SELECTION OF BATTERIES AND BATTERIES MANAGEMENT SYSTEMS FOR STAND-ALONE ELECTRIFICATION SYSTEMS - SPECIFIC CASE OF AUTOMOTIVE FLOODED LEAD-ACID BATTERIES AVAILABLE IN DEVELOPING COUNTRIES |
| CEI EN 50050-1 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 1: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE LIQUID COATING MATERIALS |
| BS EN 50050-3:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable flock |
| BS EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material. Safety requirements |
| UNE-EN 50176:2010 | Stationary electrostatic application equipment for ignitable liquid coating material - Safety requirements |
| IEC 61340-4-5:2018 | Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| IEC TR 61340-1:2012 | Electrostatics - Part 1: Electrostatic phenomena - Principles and measurements |
| BS EN IEC 61340-4-5:2018 | Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| S.R. CEN/CLC/TR 16832:2015&LC:2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| I.S. EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| ISO/TS 20100:2008 | Gaseous hydrogen Fuelling stations |
| CEN/CLC/TR 16832:2015 | Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) |
| PREN 13160-1 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 1: GENERAL PRINCIPLES |
| I.S. EN 60079-32-2:2015 | EXPLOSIVE ATMOSPHERES - PART 32-2: ELECTROSTATICS HAZARDS - TESTS |
| I.S. EN 50348:2010 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| EN IEC 61340-4-5:2018 | Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| IEC TR 61340-5-2:2007 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| PREN 50059 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - HAND-HELD SPRAYING EQUIPMENT FOR NON-IGNITABLE COATING MATERIALS |
| I.S. CLC/TR 50404:2006 | ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY |
| DIN EN 438-4:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 4: CLASSIFICATION AND SPECIFICATIONS FOR COMPACT LAMINATES OF THICKNESS 2 MM AND GREATER |
| DIN EN 438-3:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 3: CLASSIFICATION AND SPECIFICATIONS FOR LAMINATES LESS THAT 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| DIN EN 438-5:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 5: CLASSIFICATION AND SPECIFICATIONS FOR FLOORING GRADE LAMINATES LESS THAN 2 MM THICK INTENDED FOR BONDING TO SUPPORTING SUBSTRATES |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| IEC 61340-5-1:2016 RLV | Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
| CEI EN 50272-2 : 2002 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| UNE-EN 50223:2016 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| BS EN 50176:2009 | Stationary electrostatic application equipment for ignitable liquid coating material. Safety requirements |
| CLC/TR 61340-5-2:2008 | Electrostatics - Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide |
| PREN 50050-3 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| PREN 50050-2 : DRAFT 2011 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| 14/30267228 DC : 0 | BS EN 61340-5-1 ED 2.0 - ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| 03/300200 DC : DRAFT JAN 2003 | CENELEC TR 50404 - ELECTROSTATICS - CODE OF PRACTICE FOR THE AVOIDANCE OF HAZARDS DUE TO STATIC ELECTRICITY |
| 02/203267 DC : DRAFT FEB 2002 | IEC 61340-4-5. ED.1 - STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - PART 4-5: METHODS FOR CHARACTERISING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION |
| CEN/TR 16832 : 2015 COR 2015 | SELECTION, USE, CARE AND MAINTENANCE OF PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTING ELECTROSTATIC RISKS IN HAZARDOUS AREAS (EXPLOSION RISKS) |
| PREN 1815 : DRAFT 2014 | RESILIENT AND LAMINATE FLOOR COVERINGS - ASSESSMENT OF STATIC ELECTRICAL PROPENSITY |
| 11/30248845 DC : 0 | BS EN 50050-2:2011 - ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| PD CLC/TR 61340-5-2:2008 | Electrostatics Protection of electronic devices from electrostatic phenomena. User guide |
| BS EN 61340-5-1:2016 | Electrostatics Protection of electronic devices from electrostatic phenomena. General requirements |
| BS PD IEC TS 60079-32-1 : 2013 | EXPLOSIVE ATMOSPHERES - PART 32-1: ELECTROSTATIC HAZARDS, GUIDANCE |
| DIN EN 50272-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| UNE-EN 50050-1:2014 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| IEC TR 61340-2-2:2000 | Electrostatics - Part 2-2: Measurement methods - Measurement of chargeability |
| BS EN 438-4:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for compact laminates of thickness 2 mm and greater |
| 11/30211394 DC : DRAFT MAR 2011 | BS ISO 20100 - GASEOUS HYDROGEN - FUELLING STATIONS |
| IEC 61340-5-1:2016 | Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements |
| BS EN 438-3:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| UNE-EN 13160-1:2017 | Leak detection systems - Part 1: General Principles |
| EN 50223:2015 | Stationary electrostatic application equipment for ignitable flock material - Safety requirements |
| EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| EN 438-4:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 4: Classification and specifications for compact laminates of thickness 2 mm and greater |
| EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| UNE-EN 50177:2010 | Stationary electrostatic application equipment for ignitable coating powders - Safety requirements |
| BS EN 50050-1:2013 | Electrostatic hand-held spraying equipment. Safety requirements Hand-held spraying equipment for ignitable liquid coating materials |
| CEI EN 50050-3 : 2014 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| BS IEC 61340-5.1 : 1998 AMD 13198 | ELECTROSTATICS - PART 5-1: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - GENERAL REQUIREMENTS |
| BS EN 61340-4-5:2004 | Electrostatics Standard test methods for specific applications. Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person |
| PD CLC/TR 50404:2003 | Electrostatics. Code of practice for the avoidance of hazards due to static electricity |
| S.R. CLC/TR 61340-5-2:2008 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| I.S. EN 50050-3:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 3: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE FLOCK |
| VDE 0510-2 : 2001 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 2: STATIONARY BATTERIES |
| CEI EN 50348 : 2011 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR NON-IGNITABLE LIQUID COATING MATERIAL - SAFETY REQUIREMENTS |
| CEI EN 61340-4-5 : 2006 | ELECTROSTATICS - PART 4-5: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - METHODS FOR CHARACTERISING THE ELECTROSTATIC PROTECTION OF FOOTWEAR AND FLOORING IN COMBINATION WITH A PERSON |
| CLC/TR 60079-32-1:2015 | Explosive atmospheres - Part 32-1: Electrostatic Hazards - Guidance |
| I.S. EN 50223:2015 | STATIONARY ELECTROSTATIC APPLICATION EQUIPMENT FOR IGNITABLE FLOCK MATERIAL - SAFETY REQUIREMENTS |
| UNE-EN 60079-32-2:2016 | Explosive atmospheres - Part 32-2: Electrostatics hazards - Tests |
| UNE-EN 438-5:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| UNE-EN 438-3:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates |
| DD ISO/TS 20100:2008 | Gaseous hydrogen. Fuelling stations |
| BS EN 438-5:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates |
| CEN/TS 14472-1:2003 | Resilient, textile and laminate floor coverings - Design, preparation and installation - Part 1: General |
| EN 50348:2010 | Stationary electrostatic application equipment for non-ignitable liquid coating material - Safety requirements |
| EN 61340-5-2:2001/corrigendum:2001 | ELECTROSTATICS - PART 5-2: PROTECTION OF ELECTRONIC DEVICES FROM ELECTROSTATIC PHENOMENA - USER GUIDE |
| EN 50050-2:2013 | ELECTROSTATIC HAND-HELD SPRAYING EQUIPMENT - SAFETY REQUIREMENTS - PART 2: HAND-HELD SPRAYING EQUIPMENT FOR IGNITABLE COATING POWDER |
| EN 50050-1:2013 | Electrostatic hand-held spraying equipment - Safety requirements - Part 1: Hand-held spraying equipment for ignitable liquid coating materials |
| ISO 1957:2000 | Machine-made textile floor coverings Selection and cutting of specimens for physical tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.