• IEC 61892-2:2012

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Mobile and fixed offshore units - Electrical installations - Part 2: System design

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  25-11-2021

    Language(s): 

    Published date:  15-03-2012

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 61892-2:2012(E) contains provisions for system design of electrical installations in mobile and fixed units used in the offshore petroleum industry for drilling, production, processing and for storage purposes, including pipeline, pumping or 'pigging' stations, compressor stations and exposed location single buoy moorings. It applies to all installations, whether permanent, temporary, transportable or hand-held, to a.c. installations up to and including 35 000 V and d.c. installations up to and including 1 500 V. (a.c. and d.c. voltages are nominal values). This standard does not apply either to fixed equipment used for medical purposes or to the electrical installations of tankers. This edition includes the following significant technical changes with respect to the previous edition:
    - the d.c. voltage given in clause 1 has been updated to 1 500 V, to ensure consistency through all parts of the IEC 61892 series;
    - Clause 4 has been rewritten, such that all requirements to emergency power are now given in 4.3;
    - the tables for nominal a.c. voltages have been updated in accordance with the last revision of IEC 60038;
    - the requirement to cross sectional area for earthing conductors has been made dependent on the system earthing arrangement;
    - requirement for emergency stop for motor-driven fuel-oil transfer and fuel-oil pressure pumps has been added.The contents of the corrigendum of March 2013 have been included in this copy.

    General Product Information - (Show below) - (Hide below)

    Committee TC 18
    Development Note Stability Date: 2017. (09/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    NORSOK Z 015 : REV 4 TEMPORARY EQUIPMENT
    BS IEC 61892-3:2012 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    IEC TR 60092-370:2009 Electrical installations in ships - Part 370: Guidance on the selection of cables for telecommunication and data transfer including radio-frequency cables
    BS IEC 61892-5:2014 Mobile and fixed offshore units. Electrical installations Mobile units
    BS IEC 61892-1:2015 Mobile and fixed offshore units. Electrical installations General requirements and conditions
    IEC 61892-5:2014 Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
    BS IEC 61892-6:2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
    IEC 61892-6:2013 Mobile and fixed offshore units - Electrical installations - Part 6: Installation
    IEC 61892-4:2007 Mobile and fixed offshore units - Electrical installations - Part 4: Cables
    IEC 61892-1:2015 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
    IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
    IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
    ISO 13702:2015 Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines
    13/30294120 DC : 0 BS IEC 61892-5 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 5: MOBILE UNITS
    12/30261012 DC : 0 BS IEC 61892-6 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 6: INSTALLATION
    09/30200619 DC : 0 BS IEC 61892-1 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
    BS IEC 61892-7:2014 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
    14/30293263 DC : 0 BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
    12/30276304 DC : 0 BS EN 61892-7 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 7: HAZARDOUS AREAS
    10/30230568 DC : 0 BS EN 61892-3 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    UNE-IEC 61892-4:2016 Mobile and fixed offshore units - Electrical installations - Part 4: Cables
    BS EN ISO 13702:2015 Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines
    I.S. EN ISO 13702:2015 PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015)
    CEI 18-64 : 2008 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 4: CABLES
    CEI 18-62 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 5: MOBILE UNITS
    EN ISO 13702 : 1999 PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015)
    CEI 18-58 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 3: EQUIPMENT
    CEI 18-61 : 2013 MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS
    EI MODEL CODE SAFE PRACTICE PT1 : 2010 THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
    IEC 60364-5-54:2011 Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors
    IEC 60038:2009 IEC standard voltages
    IEC 61000-2-4:2002 Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
    IEC 61194:1992 Characteristic parameters of stand-alone photovoltaic (PV) systems
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 60034-22:2009 Rotating electrical machines - Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets
    IEC 60050-601:1985 International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General
    IEC TR 60909-1:2002 Short-circuit currents in three-phase a.c. systems - Part 1: Factors for the calculation of short-circuit currents according to IEC 60909-0
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC 60050-441:1984 International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses
    IMO IE110 : 2009 SOLAS (CONSOLIDATED EDITION)
    IEC 61892-7:2014 Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
    IEC 60909-0:2016 Short-circuit currents in three-phase a.c. systems - Part 0: Calculation of currents
    IEC 60092-504:2016 Electrical installations in ships - Part 504: Automation, control and instrumentation
    IEC 61892-5:2014 Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units
    IEC 61363-1:1998 Electrical installations of ships and mobile and fixed offshore units - Part 1: Procedures for calculating short-circuit currents in three-phase a.c.
    IEC 60364-1:2005 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions
    IMO IA811 : 2001 MOBILE OFFSHORE DRILLING UNITS (MODU) CODE, CONSOLIDATED
    IEC 61892-3:2012 Mobile and fixed offshore units - Electrical installations - Part 3: Equipment
    IEC 60447:2004 Basic and safety principles for man-machine interface, marking and identification - Actuating principles
    IEC 60050-603:1986 International Electrotechnical Vocabulary (IEV) - Part 603: Generation, transmission and distribution of electricity - Power systems planning and management
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61660-1:1997 Short-circuit currents in d.c. auxiliary installations in power plants and substations - Part 1: Calculation of short-circuit currents
    IEC 61892-1:2015 Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
    IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
    IEC 61892-6:2013 Mobile and fixed offshore units - Electrical installations - Part 6: Installation
    IEEE 1584 : 2002 GUIDE FOR PERFORMING ARC-FLASH HAZARD CALCULATIONS
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    IEC 60050-602:1983 International Electrotechnical Vocabulary (IEV) - Part 602: Generation, transmission and distribution of electricity - Generation
    IEC 60050-448:1995 International Electrotechnical Vocabulary (IEV) - Part 448: Power system protection
    IEC 60092-101:1994+AMD1:1995 CSV Electrical installations in ships - Part 101: Definitions and general requirements
    IMO IB904 : 2003 SUPP 2016 COLLISION REGULATIONS CONVENTION (COLREGS)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective