• IEEE C57.106 : 2006

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    ACCEPTANCE AND MAINTENANCE OF INSULATING MINERAL OIL IN ELECTRICAL EQUIPMENT

    Available format(s):  Hardcopy, PDF

    Superseded date:  15-10-2021

    Language(s):  English

    Published date:  01-01-2006

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Overview
    2 Normative references
    3 Definitions
    4 Evaluation of mineral insulating oil
    5 Mineral oil tests and their significance
    6 Handling and storage
    7 Mineral oil for load tap changers (LTCs)
    8 Health and environmental care procedures for mineral
      oil
    Annex A (informative) - Bibliography
    Annex B (informative) - Examples ASTM D1816 breakdown
            voltage vs. %RS for new mineral oil

    Abstract - (Show below) - (Hide below)

    Pertains to mineral oil used in transformers, load tap changers, voltage regulators, and reactors.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes IEEE DRAFT C57.106. (10/2007)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE C57.21 : 2008 REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA
    IEEE C57.154 : 2012 DESIGN, TESTING, AND APPLICATION OF LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS USING HIGH-TEMPERATURE INSULATION SYSTEMS AND OPERATING AT ELEVATED TEMPERATURES
    IEEE C57.32 : 2015 REQUIREMENTS, TERMINOLOGY, AND TEST PROCEDURES FOR NEUTRAL GROUNDING DEVICES
    IEEE DRAFT 62 : 200D8 GUIDE FOR DIAGNOSTIC FIELD TESTING OF ELECTRIC POWER APPARATUS
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    I.S. EN 60422:2013 MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
    IEEE C37.010 : 1999 AC HIGH-VOLTAGE CIRCUIT BREAKERS > 1000 VAC RATED ON A SYMMETRICAL CURRENT BASIS
    IEEE C37.100.1 : 2007 COMMON REQUIREMENTS FOR HIGH VOLTAGE POWER SWITCHGEAR RATED ABOVE 1000 V
    IEEE DRAFT C57.93 : D13 2005 INSTALLATION AND MAINTENANCE OF LIQUID-IMMERSED POWER TRANSFORMERS
    IEEE C57.637 : 2015 GUIDE FOR THE RECLAMATION OF MINERAL INSULATING OIL AND CRITERIA FOR ITS USE
    ASTM D 1816 : 2012 : REDLINE Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
    IEEE 3006.3 : 2017 RECOMMENDED PRACTICE FOR DETERMINING THE IMPACT OF PREVENTATIVE MAINTENANCE ON THE RELIABILITY OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEEE C57.15 : 2009 REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR STEP-VOLTAGE REGULATORS
    IEEE 1861 : 2014 GUIDE FOR ON-SITE ACCEPTANCE TESTS OF ELECTRICAL EQUIPMENT AND SYSTEM COMMISSIONING OF 1000 KV AC AND ABOVE
    10/30215366 DC : 0 BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
    IEEE C57.13.5-2009 REDLINE IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
    BS IEC 60076-21:2011 Power transformers Standard requirements, terminology, and test code for step-voltage regulators
    API 540 : 1999 : R2006 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    IEC 60076-21:2011 Power transformers - Part 21: Standard requirements, terminology, and test code for step-voltage regulators
    IEEE C57.12.38 : 2014 PAD-MOUNTED-TYPE, SELF-COOLED, SINGLE-PHASE DISTRIBUTION TRANSFORMERS 250 KVA AND SMALLER: HIGH VOLTAGE, 34 500 GRDY/19 920 V AND BELOW; LOW VOLTAGE, 480/240 V AND BELOW
    BS EN 60422:2013 (published 2014-03) Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
    IEEE C57.140 : 2006 EVALUATION AND RECONDITIONING OF LIQUID IMMERSED POWER TRANSFORMERS
    IEEE C57.125:2015 GUIDE FOR FAILURE INVESTIGATION, DOCUMENTATION, ANALYSIS, AND REPORTING FOR POWER TRANSFORMERS AND SHUNT REACTORS
    IEEE C57.146:2005 INTERPRETATION OF GASES GENERATED IN SILICONE-IMMERSED TRANSFORMERS
    IEEE 62-1995 GUIDE FOR DIAGNOSTIC FIELD TESTING OF ELECTRIC POWER APPARATUS - OIL FILLED POWER TRANSFORMERS, REGULATORS, AND REACTORS
    IEEE C37.121 : 2012 GUIDE FOR SWITCHGEAR - UNIT SUBSTATION - REQUIREMENTS
    API 540:1999 ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS
    IEEE 1147 : 2005 GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS
    UNE-EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    IEC 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    IEEE DRAFT C57.12.90 : D5.1 98 DRAFT STANDARD TEST CODE FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEEE C57.150 : 2012 GUIDE FOR THE TRANSPORTATION OF TRANSFORMERS AND REACTORS RATED 10000 KVA OR HIGHER
    IEEE C57.12.00-2015 STANDARD FOR GENERAL REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEEE 1653.1:2016 TRACTION POWER RECTIFIER TRANSFORMERS FOR SUBSTATION APPLICATIONS UP TO 1500 V DC NOMINAL OUTPUT
    IEEE C57.152 : 2013 GUIDE FOR DIAGNOSTIC FIELD TESTING OF FLUID-FILLED POWER TRANSFORMERS, REGULATORS, AND REACTORS
    IEEE 1277 : 2010 GENERAL REQUIREMENTS AND TEST CODE FOR DRY-TYPE AND OIL-IMMERSED SMOOTHING REACTORS FOR DC POWER TRANSMISSION
    IEEE C57.93-2007 INSTALLATION AND MAINTENANCE OF LIQUID-IMMERSED POWER TRANSFORMERS
    ANSI C37.121 : 2012 AMERICAN NATIONAL STANDARD FOR SWITCHGEAR - UNIT SUBSTATIONS - REQUIREMENTS
    IEEE C57.129-2007 GENERAL REQUIREMENTS AND TEST CODE FOR OIL-IMMERSED HVDC CONVERTER TRANSFORMERS
    IEEE 2030.2 : 2015 GUIDE FOR THE INTEROPERABILITY OF ENERGY STORAGE SYSTEMS INTEGRATED WITH THE ELECTRIC POWER INFRASTRUCTURE
    ASTM D 877/D877M : 2013 : REDLINE Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
    EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 1816 : 2012 : REDLINE Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes
    ASTM D 2285 : 1999 Standard Test Method for Interfacial Tension of Electrical Insulating Oils of Petroleum Origin Against Water by the Drop-Weight Method (Withdrawn 2008)
    ASTM D 924 : 2015 : REDLINE Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
    IEEE C57.93-2007 INSTALLATION AND MAINTENANCE OF LIQUID-IMMERSED POWER TRANSFORMERS
    CFR 40(PTS100-135) : JUL 2017 PROTECTION OF ENVIRONMENT
    IEEE C57.12.90-2010 LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    ASTM D 1275 : 2015 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
    ASTM D 1533 : 2012 : REDLINE Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration
    ASTM D 2440 : 2013 : REDLINE Standard Test Method for Oxidation Stability of Mineral Insulating Oil
    IEEE C57.139-2010 GUIDE FOR DISSOLVED GAS ANALYSIS IN TRANSFORMER LOAD TAP CHANGERS
    IEEE C57.104 : 2008 INTERPRETATION OF GASES GENERATED IN OIL-IMMERSED TRANSFORMERS
    IEEE 637 : 1985 RECLAMATION OF INSULATING OIL AND CRITERIA FOR ITS USE, GUIDE FOR THE
    CFR 40(PTS700-789) : JUL 2016 PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY
    ASTM D 1524 : 2015 : REDLINE Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field
    ASTM D 5837 : 2015 : REDLINE Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)
    ASTM D 4768 : 2011 : REDLINE Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography
    ASTM D 923 : 2015 : REDLINE Standard Practices for Sampling Electrical Insulating Liquids
    IEEE 980 : 2013 GUIDE FOR CONTAINMENT AND CONTROL OF OIL SPILLS IN SUBSTATIONS
    ASTM D 2112 : 2015 : REDLINE Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
    ASTM D 27 : 1958 Specification for Natural Rubber AO Insulation for Wire and Cable, 60C Operation (Withdrawn 1960)
    ASTM D 3300 : 2012 : REDLINE Standard Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Under Impulse Conditions
    IEEE C57.131 : 2012 REQUIREMENTS FOR TAP CHANGERS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective