IEEE C37.48-2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
31-08-2020
English
20-05-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Overview
1.1 Scope
1.2 Background
1.3 Description of fuse-enclosure packages (FEPs) using
expulsion-type indoor power class fuses
1.4 Description of FEPs using current-limiting type indoor
distribution and power class fuses
2 References
3 Abbreviations
4 General application guidelines for all fuse types
4.1 Introduction
4.2 Service conditions
4.3 Selection of class and type of fuse
4.4 Clearances and spacing
4.5 Fuse position
4.6 Noise level
4.7 Selection of fuse voltage rating
4.8 Selection of continuous current rating (all applications
except capacitor fuses and fuses used in enclosures)
4.9 Selection of interrupting rating
4.10 Fuse-to-fuse coordination procedure
4.11 Coordination for motor starter fuses (motor protection)
4.12 Effects of ambient temperature on a fuse
5 Additional application guidelines for specific devices
5.1 Current-limiting fuses
5.2 Current-limiting fuses used in fuse enclosure packages
5.3 Expulsion fuses in enclosures
5.4 External fuses for shunt capacitors
6 Operation guidelines for various fuse types
6.1 Use of nonexpendable cap on expendable-cap cutouts
6.2 Operating speed
6.3 Locking or latching of fuses, blades, or links in closed
position
6.4 Fuseholder position
6.5 Voltage withstand of blown fuses
6.6 Replacement and handling of fuses
6.7 Replacement of exhaust control device
6.8 Operation of energized fuses
6.9 Storing spare fuse units and replaceable parts
7 Additional operation guidelines for specific devices
7.1 Capacitor
7.2 Liquid-submerged expulsion fuses in enclosures
8 Maintenance for all fuse types
8.1 Safety precautions
8.2 Frequency of maintenance
8.3 Inspection of fuse or switching device
8.4 Inspection of fuse links in distribution cutouts
9 Additional maintenance guidelines for specific devices
9.1 Capacitor fuses
9.2 Liquid-submerged expulsion fuses in enclosures
Annex A (informative) Bibliography
Describes information on the application, operation, and maintenance of high-voltage fuses (above 1000 V), distribution enclosed single-pole air switches, fuse disconnecting switches, and accessories for use on ac distribution systems. Devices with rated maximum voltages to 169 kV are covered.
| Committee |
Switchgear
|
| DevelopmentNote |
Supersedes IEEE DRAFT C37.48. (11/1999)
|
| DocumentType |
Standard
|
| Pages |
57
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| IEEE 141 : 1993 | IEEE Recommended Practice for Electric Power Distribution for Industrial Plants |
| IEEE C37.73-1998 | IEEE Standard Requirements for Pad-Mounted Fused Switchgear |
| IEEE DRAFT 1036 : D13A 2006 | APPLICATION OF SHUNT POWER CAPACITORS |
| IEEE DRAFT C37.48.1 : D13 2000 | DRAFT GUIDE FOR THE OPERATION, CLASSIFICATION, APPLICATION AND COORDINATION OF CURRENT-LIMITING FUSES WITH RATED VOLTAGES 1-38 KV |
| IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE DRAFT C37.99 : D6 99 | DRAFT GUIDE FOR THE PROTECTION OF SHUNT CAPACITOR BANKS |
| IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
| UFC 3-550-07 : 2017 | UNIFIED FACILITIES CRITERIA - OPERATION AND MAINTENANCE (O&M;): EXTERIOR POWER DISTRIBUTION SYSTEMS |
| TM 5-811-1 : V19950228 | ARMY TECHNICAL MANUAL - ELECTRICAL POWER SUPPLY AND DISTRIBUTION |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| IEEE C37.42-2009 | SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS |
| IEEE C37.45-2007 | IEEE Standard Specifications for High Voltage Distribution Class Enclosed Single-Pole Air Switches with Rated Voltages from 1 through 8.3 kV |
| IEEE C37.59-2007 | IEEE Standard Requirements for Conversion of Power Switchgear Equipment |
| IEC TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| NEMA SG 2 : 1993 | HIGH VOLTAGE FUSES |
| IEEE DRAFT C37.20.4 : 2001 | DRAFT STANDARD FOR INDOOR AC SWITCHES RATED ABOVE 1KV THROUGH 38KV FOR USE IN METAL-ENCLOSED SWITCHGEAR |
| IEEE C37.47-2011 | IEEE Standard Specifications for High-Voltage (>1000 V) Distribution Class Current-Limiting Type Fuses and Fuse Disconnecting Switches |
| IEEE C37.46-2010 | IEEE Standard Specifications for High-Voltage (>1000 V) Expulsion and Current-Limiting Power Class Fuses and Fuse Disconnecting Switches |
| IEEE 242-2001 | IEEE Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems (IEEE Buff Book) |
| IEEE 1531-2003 | IEEE Guide for Application and Specification of Harmonic Filters |
| PD IEC/TR 62655:2013 | Tutorial and application guide for high-voltage fuses |
| IEEE DRAFT 1313.2 : D6 DEC 98 | DRAFT GUIDE FOR THE APPLICATION OF INSULATED COORDINATION |
| IEEE C37.74-2014 | IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV |
| IEEE C37.42-2009 | IEEE Standard Specifications for High-Voltage (> 1000 V) Expulsion-Type Distribution-Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links, and Accessories Used with These Devices |
| IEEE C37.43-2008 | IEEE Standard Specifications for High-Voltage Expulsion, Current-Limiting, and Combination-Type Distribution and Power Class External Fuses, with Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors |
| IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
| IEEE 1036-2010 | IEEE Guide for the Application of Shunt Power Capacitors |
| IEEE C37.99-2012 | IEEE Guide for the Protection of Shunt Capacitor Banks |
| IEEE C37.95-2014 | IEEE Guide for Protective Relaying of Utility-Consumer Interconnections |
| IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
| IEEE C37.20.3-2013 REDLINE | IEEE Standard for Metal-Enclosed Interrupter Switchgear (1 kV-38 kV) |
| IEEE C37.20.9-2019 | IEEE Standard for Metal-Enclosed Switchgear Rated 1 kV to 52 kV Incorporating Gas Insulating Systems |
| IEEE C37.42-2016 | IEEE Standard Specifications for High-Voltage (>1000 V) Fuses and Accessories |
| IEEE C37.48.1-2011 | IEEE Guide for the Application, Operation, and Coordination of High-Voltage (>1000 V) Current-Limiting Fuses |
| IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| IEEE C37.46-2010 | FOR HIGH VOLTAGE EXPULSION AND CURRENT-LIMITING TYPE POWER CLASS FUSES AND FUSE DISCONNECTING SWITCHES |
| IEEE 18-2002 | IEEE Standard for Shunt Power Capacitors |
| IEEE C37.42-2009 | SWITCHGEAR DISTRIBUTION CUTOUTS AND FUSE LINKS SPECIFICATIONS |
| IEEE C37.92-2005 | IEEE Standard for Analog Inputs to Protective Relays From Electronic Voltage and Current Transducers |
| IEC 60282-1:2009+AMD1:2014 CSV | High-voltage fuses - Part 1: Current-limiting fuses |
| IEEE C37.99-2000 | IEEE Guide for the Protection of Shunt Capacitor Banks |
| IEEE 1036-2010 | IEEE Guide for the Application of Shunt Power Capacitors |
| NEMA CP 1:2000 (R2008) | SHUNT CAPACITORS |
| IEEE C62.92.4-2014 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems--Part IV: Distribution |
| IEEE C37.99-2012 | IEEE Guide for the Protection of Shunt Capacitor Banks |
| IEEE C37.45-2007 | SPECIFICATIONS FOR DISTRIBUTION ENCLOSED SINGLE-POLE AIR SWITCHES |
| IEEE C37.40-2003 | IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEEE C37.41-2008 REDLINE | IEEE Standard Design Tests for High-Voltage (>1000 V) Fuses, Fuse and Disconnecting Cutouts, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Fuse Links and Accessories Used with These Devices |
| IEEE C37.41-2000 | IEEE Standard Design Tests For High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
| IEEE 18-2012 | IEEE Standard for Shunt Power Capacitors |
| IEEE C37.48.1-2002 | IEEE Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1-38kV |
| IEC 60282-2:2008 | High-voltage fuses - Part 2: Expulsion fuses |
| IEEE C37.47-2011 | DISTRIBUTION FUSE DISCONNECTING SWITCHES, FUSE SUPPORTS, AND CURRENT LIMITING FUSES, SPECIFICATIONS FOR (INCLUDES SUPPLEMENT ANSI C37.47A 1983), |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.