ISA 61010-1 : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
31-07-2020
English
01-01-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preface
NATIONAL DIFFERENCES
FOREWORD
1 Scope and object
2 Normative references
3 Terms and definitions
4 Tests
5 Marking and documentation
6 Protection against electric shock
7 Protection against mechanical HAZARDS
8 Resistance to mechanical stresses
9 Protection against the spread of fire
10 Equipment temperature limits and resistance to heat
11 Protection against HAZARDS from fluids
12 Protection against radiation, including laser sources,
and against sonic and ultrasonic pressure
13 Protection against liberated gases and substances,
explosion and implosion
14 Components and subassemblies
15 Protection by interlocks
16 HAZARDS resulting from application
17 RISK assessment
Annex A (normative) - Measuring circuits for touch current
Annex B (normative) - Standard test fingers
Annex C (normative) - Measurement of CLEARANCES and
CREEPAGE DISTANCES
Annex D (normative) - Parts between which insulation
requirements are specified
Annex E (normative) - Guideline for reduction of POLLUTION
DEGREES
Annex F (normative) - ROUTINE TESTS
Annex G (informative) - Leakage and rupture from fluids
under pressure
Annex H (normative) - Qualification of conformal coatings
for protection against POLLUTION
Annex I (informative) - Line-to-neutral voltages for common
MAINS supply systems
Annex J (informative) - RISK assessment
Annex K (normative) - Insulation requirements not covered
by 6.7
Annex L (informative) - Index of defined terms
Annex DVA (informative) - CSA, UL, and IEC component
standards
Annex DVB (informative) - Clauses affected by National
Differences
Annex DVC (informative) - UV radiation limits: Guidelines
from the American Conference of Governmental
Industrial Hygienists (ACGIH)
Annex DVD (normative) - Permanent connection to MAINS
Bibliography
Describes general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used.
| DevelopmentNote |
Also numbered as CSA C22.2.61010.1 and UL 61010-1. Supersedes and Renumbers ISA 82.02.01. (09/2004)
|
| DocumentType |
Standard
|
| Pages |
160
|
| PublisherName |
International Society of Automation
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ISA 12.27.01 : 2003 | REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS |
| FM 6320 : 2018 | COMBUSTIBLE GAS DETECTORS |
| ISA 92.04.01-1 : 2007 | PERFORMANCE REQUIREMENTS FOR INSTRUMENTS USED TO DETECT OXYGEN-DEFICIENT/OXYGEN-ENRICHED ATMOSPHERES |
| CSA C22.4 No. 1 : 2009(R2018) | OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE |
| ISA 12.27.01 : 2011 | REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS |
| CSA C22.4 PACKAGE : 2009 | CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| ISA 92.02.01-1 : 1998 | PERFORMANCE REQUIREMENTS FOR CARBON MONOXIDE DETECTION INSTRUMENTS (50-1000 PPM FULL SCALE) |
| ISA 92.02.01-1 : 1998 : R2007 | PERFORMANCE REQUIREMENTS FOR CARBON MONOXIDE DETECTION INSTRUMENTS (50-1000 PPM FULL SCALE) |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| IEC 61672-2:2013+AMD1:2017 CSV | Electroacoustics - Sound level meters - Part 2: Pattern evaluation tests |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| CSA C22.2 No. 223 : 2015 | POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS |
| UL 1439:5ED 2015-04-21 | Tests for Sharpness of Edges on Equipment |
| IEC 60335-2-24:2010+AMD1:2012+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers |
| IEC 60050-195:1998 | International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 9614-1:1993 | Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 1: Measurement at discrete points |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| CSA C22.2 No. 0.4 : 2004(R2013) | BONDING OF ELECTRICAL EQUIPMENT |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| ISO 13852:1996 | Safety of machinery Safety distances to prevent danger zones being reached by the upper limbs |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| IEC 60332-2-2:2004 | Tests on electric and optical fibre cables under fire conditions - Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame |
| IEC 60825-1:2014 | Safety of laser products - Part 1: Equipment classification and requirements |
| CFR 21(PTS800-1299) : 0 | FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 800-1299 |
| ANSI B11 TR3 : 2000 | RISK ASSESSMENT AND RISK REDUCTION - A GUIDE TO ESTIMATE, EVALUATE AND REDUCE RISKS ASSOCIATED WITH MACHINE TOOLS |
| IEC 61243-3:2014 | Live working - Voltage detectors - Part 3: Two-pole low-voltage type |
| IEC 61010-2-030:2017 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-030: Particular requirements for equipment having testing or measuring circuits |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| IEC 60332-1-2:2004+AMD1:2015 CSV | Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulatedwire or cable - Procedure for 1 kW pre-mixed flame |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
| IEC 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| ISO 361:1975 | Basic ionizing radiation symbol |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| IEC 60447:2004 | Basic and safety principles for man-machine interface, marking and identification - Actuating principles |
| IEC 60405:2003 | Nuclear instrumentation - Constructional requirements and classification of radiometric gauges |
| SEMI S10 : 2015E | SAFETY GUIDELINE FOR RISK ASSESSMENT AND RISK EVALUATION PROCESS |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| IEC 60947-1:2007+AMD1:2010+AMD2:2014 CSV | Low-voltage switchgear and controlgear - Part 1: General rules |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| IEC 60439-1:1999+AMD1:2004 CSV | Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
| IEC 62262:2002 | Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) |
| CSA C22.2 No. 182.3 : 2016 | SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS |
| ISO 13854:2017 | Safety of machinery — Minimum gaps to avoid crushing of parts of the human body |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| IEC 60050-826:2004 | International Electrotechnical Vocabulary (IEV) - Part 826: Electrical installations |
| IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
| IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
| IEC 61010-031:2015 RLV | Safety requirements for electrical equipment for measurement, control and laboratory use - Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test |
| IEC 60947-3:2008+AMD1:2012+AMD2:2015 CSV | Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units |
| IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
| IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
| IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
| IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
| IEC 60335-2-89:2010+AMD1:2012+AMD2:2015 CSV | Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant unit or compressor |
| IEC 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.