ISO 10456:2007
Current
Current
The latest, up-to-date edition.
Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Published date
10-12-2007
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 10456:2007 specifies methods for the determination of declared and design thermal values for thermally homogeneous building materials and products, together with procedures to convert values obtained under one set of conditions to those valid for another set of conditions. These procedures are valid for design ambient temperatures between -30 °C and +60 °C.
ISO 10456:2007 provides conversion coefficients for temperature and for moisture. These coefficients are valid for mean temperatures between 0 °C and 30 °C.
ISO 10456:2007 also provides design data in tabular form for use in heat and moisture transfer calculations, for thermally homogeneous materials and products commonly used in building construction.
| Committee |
ISO/TC 163/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 10456. (12/2007)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 10456 : 2008 | Identical |
| NBN EN ISO 10456 : 2008 COR 2009 | Identical |
| NEN EN ISO 10456 : 2008 C1 2009 | Identical |
| NS EN ISO 10456 : 2007 + NA 2010 | Identical |
| I.S. EN ISO 10456:2007 | Identical |
| PN EN ISO 10456 : 2009 AC 2010 | Identical |
| SN EN ISO 10456 : 2007 | Identical |
| UNE-EN ISO 10456:2012 | Identical |
| BS EN ISO 10456:2007 | Identical |
| DIN EN ISO 10456:2010-05 | Identical |
| UNI EN ISO 10456 : 2008 | Identical |
| DIN EN 12831-1:2017-09 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| I.S. EN 14314:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| 00/108216 DC : DRAFT NOV 2000 | PREN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| 08/30181539 DC : DRAFT APR 2008 | BS EN ISO 12574-3 - THERMAL INSULATION - CELLULOSE-FIBRE LOOSE-FILL FOR HORIZONTAL APPLICATIONS IN VENTILATED ROOF SPACES - PART 3: TEST METHODS |
| 15/30315069 DC : DRAFT MAY 2015 | BS EN 14313 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| 16/30325907 DC : 0 | BS EN 15102 - DECORATIVE WALLCOVERINGS - ROLL FORM |
| BS EN 14509:2013 | Self-supporting double skin metal faced insulating panels. Factory made products. Specifications |
| 15/30328765 DC : 0 | BS EN 12602 - PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN 14316-2:2007 | Thermal insulation products for buildings. In-situ thermal insulation formed from expanded perlite (EP) products Specification for the installed products |
| I.S. EN ISO 23993:2010 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF DESIGN THERMAL CONDUCTIVITY |
| BS ISO 12575-1:2012 | Thermal insulation. Exterior insulating systems for foundations Material specification |
| 11/30251988 DC : 0 | BS EN 14190 - GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14313 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| PREN 13279-1 : DRAFT 2017 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| 16/30310958 DC : 0 | BS EN ISO 12631 - THERMAL PERFORMANCE OF CURTAIN WALLING - CALCULATION OF THERMAL TRANSMITTANCE |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN EN ISO 13788:2013-05 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012) |
| BS EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA). Expanded clay lightweight aggregate products (LWA) |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| 14/30282881 DC : 0 | BS EN 16809-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| 15/30315078 DC : DRAFT MAY 2015 | BS EN 14307 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 15732:2013-01 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| 08/30171552 DC : DRAFT JAN 2008 | BS EN 13279-1 - GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14320-2:2013-04 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products |
| DIN EN 14509:2013-12 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| 05/30136503 DC : 0 | PREN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| PREN 14309 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| PD CEN ISO/TR 52019-2:2017 | Energy performance of buildings. Hygrothermal performance of building components and building elements Explanation and justification |
| BS EN 16809-2:2017 | Thermal insulation products of buildings. In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads Specification for the bonded and loose-fill products after installation |
| 05/30134427 DC : DRAFT MAY 2005 | ISO 6946 - BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHOD |
| 05/30134442 DC : DRAFT MAY 2005 | ISO/DIS 13370 - THERMAL PERFORMANCE OF BUILDINGS - HEAT TRANSFER VIA THE GROUND - CALCULATION METHODS |
| UNI EN 16240 : 2014 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 15286:2013 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| DIN EN 14303:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 16069:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| DIN EN 14304:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| I.S. EN 15037-4:2010 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| I.S. EN 15101-1:2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| I.S. EN 16012:2012 | THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE |
| I.S. EN 16069:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| UNE-EN 14315-2:2013 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products |
| PREN 12602 : DRAFT 2015 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| UNI EN 15037-4 : 2013 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| UNI EN 14320-2 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| EN ISO 10211:2017 | Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017) |
| I.S. EN 16809-2:2017 | THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| ISO 13370:2017 | Thermal performance of buildings — Heat transfer via the ground — Calculation methods |
| UNI EN 15101-1 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| UNE-EN ISO 23993:2012 | Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01) |
| I.S. EN ISO 10211:2017 | THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS (ISO 10211:2017) |
| UNE-EN 14063-2:2015 | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products |
| EN 15101-1:2013 | Thermal insulation products for buildings - In-situ formed loose fill cellulose (LFCI) products - Part 1: Specification for the products before installation |
| UNI EN 15732 : 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. EN 14963:2006 | ROOF COVERINGS - CONTINUOUS ROOFLIGHTS OF PLASTICS WITH OR WITHOUT UPSTANDS - CLASSIFICATION, REQUIREMENTS AND TEST METHODS |
| PREN 16809-1 : DRAFT 2014 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 1: SPECIFICATION FOR THE BONDED AND LOOSE FILLED PRODUCTS BEFORE INSTALLATION |
| I.S. EN 14915:2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| EN 14915:2013+A1:2017 | Solid wood panelling and cladding - Characteristics, requirements and marking |
| UNE-EN ISO 10077-1:2010 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General |
| DIN EN 771-6:2015-11 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| DIN EN 13169:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| DIN EN 1469:2015-05 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| DIN EN 1473:2016-10 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| UNE-EN ISO 6946:2012 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:2007) |
| BS EN 13499:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on expanded polystyrene. Specification |
| BS EN 14190:2014 | Gypsum board products from reprocessing. Definitions, requirements and test methods |
| BS EN 673:2011 | Glass in building. Determination of thermal transmittance (U value). Calculation method |
| BS EN ISO 10211-1:1996 | Thermal bridges in building construction. Heat flows and surface temperatures General calculation methods |
| BS EN 1873 : 2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| BS EN 12831:2003 | Heating systems in buildings. Method for calculation of the design heat load |
| BS EN 13168 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| I.S. EN ISO 13788:2012 | HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - INTERNAL SURFACE TEMPERATURE TO AVOID CRITICAL SURFACE HUMIDITY AND INTERSTITIAL CONDENSATION - CALCULATION METHODS (ISO 13788:2012) |
| I.S. EN 13168:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| I.S. EN 13165:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| EN 13500:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on mineral wool - Specification |
| DIN EN 13815:2006-12 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
| EN 13499:2003 | Thermal insulation products for buildings - External thermal insulation composite systems (ETICS) based on expanded polystyrene - Specification |
| DIN EN 15388:2008-06 | AGGLOMERATED STONE - SLABS AND CUT-TO-SIZE PRODUCTS FOR VANITY AND KITCHEN TOPS |
| EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
| EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| EN 12831-1:2017 | Energy performance of buildings - Method for calculation of the design heat load - Part 1: Space heating load, Module M3-3 |
| EN 13166:2012+A2:2016 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| EN 12859:2011 | Gypsum blocks - Definitions, requirements and test methods |
| CEN/TR 14613:2003 | Thermal performance of building materials and components - Principles for the determination of thermal properties of moist material and components |
| DIN EN 13915:2017-09 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN 13162:2012+A1:2015 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| EN 13163:2012+A2:2016 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
| EN 13055-2:2004 | Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| PREN ISO 13788 : DRAFT 2011 | HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - INTERNAL SURFACE TEMPERATURE TO AVOID CRITICAL SURFACE HUMIDITY AND INTERSTITIAL CONDENSATION - CALCULATION METHODS |
| DIN EN 16809-2:2017-04 | THERMAL INSULATION PRODUCTS OF BUILDINGS - IN-SITU FORMED PRODUCTS FROM LOOSE-FILL EXPANDED POLYSTYRENE (EPS) BEADS AND BONDED EXPANDED POLYSTYRENE BEADS - PART 2: SPECIFICATION FOR THE BONDED AND LOOSE-FILL PRODUCTS AFTER INSTALLATION |
| 09/30198700 DC : 0 | BS EN 15037-4 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| BS EN 14320-2:2013 | Thermal insulating products for building equipment and industrial installations. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the installed insulation products |
| 15/30315087 DC : DRAFT MAY 2015 | BS EN 14314 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| PREN 14915 : DRAFT 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| 13/30266550 DC : 0 | BS EN 14509 - SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 16025-1:2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| 10/30218654 DC : 0 | BS EN 12859 - GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNE 136021:2016 | Finite Element Calculation Method for the determination of the thermal transmittance of masonry built from clay masonry units. |
| BS EN 14318-2:2013 | Thermal insulating products for buildings. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the installed insulation products |
| DIN EN 16012:2015-05 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance (includes Amendment A1:2015) |
| DIN EN ISO 23993:2011-02 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF DESIGN THERMAL CONDUCTIVITY |
| UNI EN ISO 23993 : 2011 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF DESIGN THERMAL CONDUCTIVITY |
| 08/30178840 DC : DRAFT AUG 2008 | BS EN 15037-3 - PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| BS EN ISO 10211:2017 | Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations |
| BS EN 14319-2:2013 | Thermal insulating products for building equipment and industrial installations. In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products Specification for the installed insulation products |
| PREN 14064-1 : DRAFT 2016 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 15/30323246 DC : 0 | BS EN ISO 10077-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES |
| 15/30315081 DC : DRAFT MAY 2015 | BS EN 14308 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| 12/30256420 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| DIN EN 14317-2:2007-04 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
| 17/30354239 DC : 0 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| DIN EN 14064-2:2010-06 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products |
| DIN EN 16025-1:2013-07 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| DIN EN 12602:2015-12 (Draft) | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN ISO 12631:2017 | Thermal performance of curtain walling. Calculation of thermal transmittance |
| BS EN 16025-1:2013 | Thermal and/or sound insulating products in building construction. Bound EPS ballastings Requirements for factory premixed EPS dry plaster |
| 08/30169559 DC : DRAFT APR 2008 | BS EN 13171 - THERMAL INSULATING PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| BS EN 14303 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS EN 14315-2:2013 | Thermal insulating products for buildings. In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products Specification for the installed insulation products |
| BS EN 15286:2013 | Agglomerated stone. Slabs and tiles for wall finishes (internal and external) |
| 10/30218985 DC : DRAFT JUNE 2010 | BS EN 13369 - COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 14319-2:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| BS EN ISO 6946:1997 | Building components and building elements. Thermal resistance and thermal transmittance. Calculation method |
| PREN ISO 10077-2 : DRAFT 2009 | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES |
| I.S. EN 14305:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| 15/30301583 DC : 0 | BS EN 16863 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE REFLECTIVE INSULATION PRODUCTS (RI) - SPECIFICATION |
| PREN 14314 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| PREN 15732 : DRAFT 2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| PREN 14304 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| DIN EN 14313:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| UNI EN 15037-3 : 2011 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| I.S. EN 14309:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| PREN 13813 : DRAFT 2017 | SCREED MATERIAL AND FLOOR SCREEDS - SCREED MATERIAL - PROPERTIES AND REQUIREMENTS |
| I.S. EN 14064-2:2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSEFILL MINERAL WOOL (MW) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| BS EN 15037-3 : 2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| DIN EN 14308:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| UNE-EN 14309:2017 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| I.S. EN 13055:2016 | LIGHTWEIGHT AGGREGATES |
| DIN EN 14309:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| I.S. EN 12831-1:2017 | ENERGY PERFORMANCE OF BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD, MODULE M3-3 |
| BS EN 13369:2013 | Common rules for precast concrete products |
| S.R. CEN ISO/TR 52019-2:2017 | ENERGY PERFORMANCE OF BUILDINGS - HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - PART 2: EXPLANATION AND JUSTIFICATION (ISO/TR 52019-2:2017) |
| PREN 14305 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 14041:2018 | RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| BS EN 14304 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| I.S. EN 14315-2:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| I.S. EN 13369:2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| ISO 12631:2017 | Thermal performance of curtain walling — Calculation of thermal transmittance |
| I.S. EN 14303:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 15101-1:2013-12 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| 12/30268937 DC : 0 | BS EN 16491 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
| EN ISO 13370:2017 | Thermal performance of buildings - Heat transfer via the ground - Calculation methods (ISO 13370:2017) |
| UNI EN 14064-2 : 2010 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| UNE-EN 16012:2013 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance |
| EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2017) |
| DIN EN 13279-1:2008-11 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 13170:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN 13164:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 13165:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| DIN EN 13166:2016-09 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| DIN EN 13168:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
| DIN EN 1520:2011-06 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| DIN EN 1745:2012-07 | MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES |
| DIN EN 13162:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| DIN EN 14342:2013-09 | Wood flooring - Characteristics, evaluation of conformity and marking |
| DIN EN 12058:2015-05 | NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS |
| DIN EN 12057:2015-05 | NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS |
| UNE-EN 1745:2013 | Masonry and masonry products - Methods for determining thermal properties |
| BS EN 13055-2:2004 | Lightweight aggregates Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications |
| ISO 13793:2001 | Thermal performance of buildings - Thermal design of foundations to avoid frost heave |
| BS EN 13169 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| BS EN 12057:2015 | Natural stone products. Modular tiles. Requirements |
| I.S. EN 771-6:2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| DIN EN 13163:2017-02 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| I.S. EN 12058:2015 | NATURAL STONE PRODUCTS - SLABS FOR FLOORS AND STAIRS - REQUIREMENTS |
| I.S. EN 12057:2015 | NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS |
| DIN EN 1473:1997-11 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| I.S. EN 13163:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| I.S. EN 673:2011 | GLASS IN BUILDING - DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE) - CALCULATION METHOD |
| I.S. EN 13166:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| I.S. EN 1520:2011 | PREFABRICATED REINFORCED COMPONENTS OF LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE WITH STRUCTURAL OR NON-STRUCTURAL REINFORCEMENT |
| I.S. EN 13915:2017 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13167:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 12524:2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| DIN EN 12602:2016-12 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 13171:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| I.S. EN 13170:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| I.S. EN 13169:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
| I.S. EN 1873:2014 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| I.S. EN 14342:2013 | WOOD FLOORING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 13162:2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| I.S. EN 1473:2016 | INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| I.S. EN 13950:2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| I.S. EN 13964:2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 1469:2015 | NATURAL STONE PRODUCTS - SLABS FOR CLADDING - REQUIREMENTS |
| I.S. EN 12859:2011 | GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 1873:2016-07 | PREFABRICATED ACCESSORIES FOR ROOFING - INDIVIDUAL ROOFLIGHTS OF PLASTICS - PRODUCT SPECIFICATION AND TEST METHODS |
| DIN EN 15037-4:2013-08 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| BS EN 12831-1:2017 | Energy performance of buildings. Method for calculation of the design heat load Space heating load, Module M3-3 |
| ISO 10077-2:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 2: Numerical method for frames |
| BS EN 13055:2016 | Lightweight aggregates |
| BS EN 14314:2015 | Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification |
| 15/30313349 DC : 0 | BS EN ISO 10211 - THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS |
| PD CEN/TR 14613:2003 | Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s |
| 05/30134362 DC : DRAFT MAY 2005 | EN 15101-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL CELLULOSE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| 15/30315075 DC : DRAFT MAY 2015 | BS EN 14305 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings. Requirements and test methods |
| BS EN ISO 13370:2017 | Thermal performance of buildings. Heat transfer via the ground. Calculation methods |
| 00/108536 DC : 0 | PREN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| 13/30258117 DC : 0 | BS EN 15101-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| 15/30332579 DC : DRAFT DEC 2015 | BS EN 16954 - AGGLOMERATED STONE - SLABS AND CUT-TO-SIZE PRODUCTS FOR FLOORING AND STAIRS (INTERNAL AND EXTERNAL) |
| DIN EN 15498:2008-08 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| BS EN 16069 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF POLYETHYLENE FOAM (PEF) - SPECIFICATION |
| UNI EN 15564 : 2009 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| UNE-EN ISO 10211:2012 | Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2007) |
| DIN EN 14063-2:2013-10 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| UNE-EN ISO 10077-2:2012 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames (ISO 10077-2:2012) |
| 05/30134438 DC : DRAFT MAY 2005 | ISO 10211 - THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS |
| DIN EN 14307:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN EN 14963:2006-12 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| BS EN 15498:2008 | Precast concrete products. Wood-chip concrete shuttering blocks. Product properties and performance |
| UNE-EN 14313:2017 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| PREN 14308 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| DIN 4108-4:2016-07 (Draft) | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN EN 14305:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| I.S. EN 16240:2013 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 15732:2012 | LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. EN 14313:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| PREN 14190 : DRAFT 2011 | GYPSUM PLASTERBOARD PRODUCTS FROM PROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14509 : DRAFT 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN ISO 6946:2017 | BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHOD (ISO 6946:2017) |
| UNI EN 16025-1 : 2013 | THERMAL AND/OR SOUND INSULATING PRODUCTS IN BUILDING CONSTRUCTION - BOUND EPS BALLASTINGS - PART 1: REQUIREMENTS FOR FACTORY PREMIXED EPS DRY PLASTER |
| PREN 14307 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| UNI EN 15498 : 2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| UNI EN 14318-2 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| PREN 13950 : DRAFT 2011 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 13915 : DRAFT 2016 | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| I.S. EN 14509:2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| I.S. EN 15498:2008 | PRECAST CONCRETE PRODUCTS - WOOD-CHIP CONCRETE SHUTTERING BLOCKS - PRODUCT PROPERTIES AND PERFORMANCE |
| DIN EN 13171:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| DIN EN 12859:2011-05 | Gypsum blocks - Definitions, requirements and test methods |
| DIN EN 13167:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN 13163:2016-08 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| DIN EN 673:2011-04 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| DIN EN 13915:2016-02 (Draft) | PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13950:2014-09 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| DIN EN 13964:2014-08 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNE-EN 14509:2014 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 15388:2008 | Agglomerated stone - Slabs and cut-to-size products for vanity and kitchen tops |
| BS EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| ISO 23993:2008 | Thermal insulation products for building equipment and industrial installations — Determination of design thermal conductivity |
| BS EN 1473:2016 | Installation and equipment for liquefied natural gas. Design of onshore installations |
| UNE-EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| UNE-EN 771-6:2012 | Specification for masonry units - Part 6: Natural stone masonry units |
| UNE-EN 12859:2012 | Gypsum blocks - Definitions, requirements and test methods |
| I.S. EN 1745:2012 | MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| ONORM EN 1745 : 2012 | MASONRY AND MASONRY PRODUCTS - METHODS FOR DETERMINING THERMAL PROPERTIES |
| EN 771-6:2011+A1:2015 | Specification for masonry units - Part 6: Natural stone masonry units |
| EN 16240:2013 | Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods |
| EN 13964:2014 | Suspended ceilings - Requirements and test methods |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| UNI EN 12859 : 2011 | GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 14063-1 : 2005 | THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| UNI EN 14509 : 2013 | SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
| UNI EN ISO 13788 : 2013 | HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - INTERNAL SURFACE TEMPERATURE TO AVOID CRITICAL SURFACE HUMIDITY AND INTERSTITIAL CONDENSATION - CALCULATION METHODS |
| UNI EN 14342 : 2013 | WOOD FLOORING AND PARQUET - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| UNI EN 1520 : 2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement |
| UNI EN 14190 : 2014 | GYPSUM BOARD PRODUCTS FROM REPROCESSING - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| UNI EN 673 : 2011 | GLASS IN BUILDING - DETERMINATION OF THERMAL TRANSMITTANCE (U VALUE) - CALCULATION METHOD |
| UNI EN 13964 : 2014 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 12831 : 2006 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
| UNI EN 13279-1 : 2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| UNI EN 13950 : 2014 | GYPSUM BOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| ISO 10211:2017 | Thermal bridges in building construction — Heat flows and surface temperatures — Detailed calculations |
| DIN EN 14319-2:2013-04 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products |
| UNE-EN 13915:2018 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| UNI EN 14315-2 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| 16/30330679 DC : DRAFT MAR 2016 | BS EN 16977 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
| BS EN 14063-2:2013 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the installed products |
| BS EN ISO 23993:2010 | Thermal insulation products for building equipment and industrial installations. Determination of design thermal conductivity |
| 14/30309932 DC : 0 | BS EN 12831-1 - HEATING SYSTEMS AND WATER BASED COOLING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - PART 1: SPACE HEATING LOAD |
| 15/30315090 DC : DRAFT MAY 2015 | BS EN 14304 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| PREN 14303 : DRAFT 2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| BS ISO 16957:2016 | Measurement of apparent thermal conductivity of wet porous building materials by a periodic method |
| PREN 13369 : DRAFT 2017 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| 07/30167926 DC : 0 | BS ISO 9076-1 - THERMAL INSULATION - MINERAL-WOOL LOOSE-FILL FOR HORIZONTAL APPLICATIONS IN VENTILATED ROOF SPACES - PART 1: MATERIAL SPECIFICATION AND TEST METHODS |
| 11/30251985 DC : 0 | BS EN 13950 - GYPSUM PLASTERBOARD THERMAL/ACOUSTIC INSULATION COMPOSITE PANELS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 14063-2 : DRAFT 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| BS EN 14308:2015 | Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification |
| 07/30170936 DC : 0 | BS EN 15732 - LIGHT WEIGHT FILL AND THERMAL INSULATION PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS (CEA) - EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) |
| I.S. EN ISO 10077-1:2017 | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL (ISO 10077-1:2017) |
| ISO 12575-1:2012 | Thermal insulation products — Exterior insulating systems for foundations — Part 1: Material specification |
| 05/30129203 DC : DRAFT FEB 2005 | ISO/DIS 12575-1 - THERMAL INSULATION - EXTERIOR INSULATING SYSTEMS FOR FOUNDATIONS - PART 1: SPECIFICATION |
| 08/30169534 DC : DRAFT APR 2008 | BS EN 13163 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| UNI EN 14319-2 : 2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| BS EN 14317-2:2007 | Thermal insulation products for buildings. In-situ thermal insulation formed from exfoliated vermiculite (EV) products Specification for the installed products |
| UNE-EN 14307:2017 | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification |
| DIN EN 16240:2014-03 | LIGHT TRANSMITTING FLAT SOLID POLYCARBONATE (PC) SHEETS FOR INTERNAL AND EXTERNAL USE IN ROOFS, WALLS AND CEILINGS - REQUIREMENTS AND TEST METHODS |
| DIN EN 15286:2013-09 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| 17/30357433 DC | BS EN 13279-1. Gypsum binders and gypsum plasters. Part 1. Definitions and requirements |
| 04/30114315 DC : 0 | EN ISO 23993 - THERMAL INSULATION FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - THERMAL CONDUCTIVITY - DETERMINATION OF DESIGN VALUES |
| UNE-EN 13369:2013 | Common rules for precast concrete products |
| 15/30315084 DC : DRAFT MAY 2015 | BS EN 14309 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
| BS EN ISO 10077-2:2017 | Thermal performance of windows, doors and shutters. Calculation of thermal transmittance Numerical method for frames |
| 11/30230944 DC : 0 | BS EN ISO 13788 - HYGROTHERMAL PERFORMANCE OF BUILDING COMPONENTS AND BUILDING ELEMENTS - INTERNAL SURFACE TEMPERATURE TO AVOID CRITICAL SURFACE HUMIDITY AND INTERSTITIAL CONDENSATION - CALCULATION METHODS |
| BS EN 14064-2:2010 | Thermal insulation products for buildings. In-situ formed loose-fill mineral wool (MW) products Specification for the installed products |
| BS EN 15388:2008 | Agglomerated stone. Slabs and cut-to-size products for vanity and kitchen tops |
| 11/30246672 DC : 0 | BS EN 15286 - AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| I.S. EN 15388:2008 | AGGLOMERATED STONE - SLABS AND CUT-TO-SIZE PRODUCTS FOR VANITY AND KITCHEN TOPS |
| DIN EN 14315-2:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| UNE-EN 14308:2017 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| DIN EN 14314:2016-03 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| PREN 15101-1 : DRAFT 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE FILL CELLULOSE (LFCI) PRODUCTS - PART 1: SPECIFICATION FOR THE PRODUCTS BEFORE INSTALLATION |
| I.S. EN ISO 10077-2:2017 | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES (ISO 10077-2:2017) |
| I.S. EN 15286:2013 | AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| UNI EN 15286 : 2013 | AGGLOMERATED STONE - SLABS AND TILES FOR WALL FINISHES (INTERNAL AND EXTERNAL) |
| BS EN 14309:2015 | Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification |
| I.S. EN 14316-2:2007 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| I.S. EN 14320-2:2013 | THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - IN-SITU FORMED SPRAYED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| PREN 15102 : DRAFT 2016 | DECORATIVE WALLCOVERINGS - ROLL FORM |
| ISO 8873-1:2006 | Rigid cellular plastics — Spray-applied polyurethane foam for thermal insulation — Part 1: Material specifications |
| DIN EN 13369:2013-08 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| I.S. EN 15564:2008 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| PREN 12859 : DRAFT 2010 | GYPSUM BLOCKS - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| PREN 16491 : DRAFT 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE COMPOSITE PRODUCTS - SPECIFICATION |
| UNE-EN 14318-2:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products |
| PREN 14041 : DRAFT 2016 | RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| I.S. EN 14308:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
| I.S. EN 14318-2:2013 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| UNE-EN 12602:2011 | Prefabricated reinforced components of autoclaved aerated concrete |
| I.S. EN 13279-1:2008 | GYPSUM BINDERS AND GYPSUM PLASTERS - PART 1: DEFINITIONS AND REQUIREMENTS |
| DIN EN 14190:2014-09 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| DIN EN 14063-1:2016-10 (Draft) | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 1: Specification for the loose-fill products before installation; German and English version prEN 14063-1:2016 |
| BS EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels. Definitions, requirements and test methods |
| BS EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods |
| BS EN 13167 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| BS EN 13815:2006 | Fibrous gypsum plaster casts. Definitions, requirements and test methods |
| BS EN 13171 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
| BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
| BS EN 13165 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
| UNE-EN 13166:2013 | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification |
| BS EN 14474:2004 | Precast concrete products. Concrete with wood-chips as aggregate. Requirements and test methods |
| BS EN 1745:2012 | Masonry and masonry products. Methods for determining thermal properties |
| UNE-EN 13167:2013 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| BS EN ISO 13793:2001 | Thermal performance of buildings. Thermal design of foundations to avoid frost heave |
| UNE-EN 13164:2013 | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification |
| UNE-EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| BS EN 13166 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
| BS EN 14342:2013 | Wood flooring and parquet. Characteristics, evaluation of conformity and marking |
| BS EN ISO 13788:2012 | Hygrothermal performance of building components and building elements. Internal surface temperature to avoid critical surface humidity and interstitial condensation. Calculation methods |
| UNE-EN 13169:2013 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| UNE-EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
| ISO 10211-1:1995 | Thermal bridges in building construction Heat flows and surface temperatures Part 1: General calculation methods |
| DIN EN 15319:2007-10 | General principles of design of fibrous (gypsum) plaster works |
| UNE-EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| ISO 13788:2012 | Hygrothermal performance of building components and building elements — Internal surface temperature to avoid critical surface humidity and interstitial condensation — Calculation methods |
| BS EN 12524:2000 | Building materials and products. Hygrothermal properties. Tabulated design values |
| UNE-EN 13162:2013 | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification |
| UNE-EN 13165:2013 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| BS EN 13279-1:2008 | Gypsum binders and gypsum plasters Definitions and requirements |
| UNE-EN 13171:2013 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| UNE-EN 1873:2015 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| ISO/TR 52019-2:2017 | Energy performance of buildings Hygrothermal performance of building components and building elements Part 2: Explanation and justification |
| UNE-EN 15037-3:2010 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| UNE-EN 13163:2013 | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification |
| UNE-EN 16069:2013 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| UNE-EN ISO 13788:2016 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05) |
| UNE-EN 13170:2013 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| BS EN 13500:2003 | Thermal insulation products for buildings. External thermal insulation composite systems (ETICS) based on mineral wool. Specification |
| BS EN 12860:2001 | Gypsum based adhesives for gypsum blocks. Definitions, requirements and test methods |
| UNE-EN 13168:2013 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| UNE-EN 12057:2015 | Natural stone products - Modular tiles - Requirements |
| BS EN 12859:2011 | Gypsum blocks. Definitions, requirements and test methods |
| EN 14308:2015 | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification |
| EN 15286:2013 | Agglomerated stone - Slabs and tiles for wall finishes (internal and external) |
| EN 13950:2014 | Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods |
| EN 14063-2:2013 | Thermal insulation products for buildings - In-situ formed expanded clay lightweight aggregate products - Part 2: Specification for the installed products |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
| EN 14190:2014 | Gypsum board products from reprocessing - Definitions, requirements and test methods |
| EN 14305:2015 | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification |
| EN 1469:2015 | Natural stone products - Slabs for cladding - Requirements |
| EN 13168:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification |
| EN 14963:2006 | Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods |
| EN 14316-2:2007 | Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
| EN 14319-2:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products |
| EN 15498:2008 | Precast concrete products - Wood-chip concrete shuttering blocks - Product properties and performance |
| EN 13815:2006 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| EN 14315-2:2013 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products |
| EN 14509:2013 | Self-supporting double skin metal faced insulating panels - Factory made products - Specifications |
| EN 16069:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification |
| EN 14309:2015 | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification |
| EN 13171:2012+A1:2015 | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification |
| EN 14318-2:2013 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 2: Specification for the installed insulation products |
| EN 14474:2004 | Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods |
| EN 13915:2017 | Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods |
| EN 15037-4:2010+A1:2013 | Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks |
| EN 1520:2011 | Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non-structural reinforcement |
| EN 1873:2014+A1:2016 | Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods |
| EN 14304:2015 | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
| EN 15037-3:2009+A1:2011 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks |
| EN 14317-2:2007 | Thermal insulation products for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 2: Specification for the installed products |
| EN ISO 12631:2017 | Thermal performance of curtain walling - Calculation of thermal transmittance (ISO 12631:2017) |
| EN 16012:2012+A1:2015 | Thermal insulation for buildings - Reflective insulation products - Determination of the declared thermal performance |
| EN ISO 10211-1 : 95 COR 2002 | THERMAL BRIDGES IN BUILDING CONSTRUCTION - CALCULATION OF HEAT FLOWS AND SURFACE TEMPERATURES - PART 1: GENERAL METHODS |
| EN 15732:2012 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| EN 14342:2013 | Wood flooring and parquet - Characteristics, evaluation of conformity and marking |
| EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| EN 14314:2015 | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification |
| EN ISO 13793:2001 | Thermal performance of buildings - Thermal design of foundations to avoid frost heave (ISO 13793:2001) |
| EN 14064-2:2010 | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 2: Specification for the installed products |
| EN 15564:2008 | Precast concrete products - Resin bound concrete - Requirements and test methods |
| EN ISO 13788:2012 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012, Corrected version 2020-05) |
| EN ISO 13787:2003 | Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003) |
| EN 14313:2015 | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
| EN ISO 23993:2010 | Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01) |
| EN 14303:2015 | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
| EN 14320-2:2013 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products |
| EN 16809-2:2017 | Thermal insulation products of buildings - In-situ formed products from loose-fill expanded polystyrene (EPS) beads and bonded expanded polystyrene beads - Part 2: Specification for the bonded and loose-fill products after installation |
| EN 16025-1:2013 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| 17/30354084 DC : 0 | BS EN 16855-2 - WALK-IN COLD ROOMS - DEFINITION, THERMAL INSULATION PERFORMANCE AND TEST METHODS - PART 2: CUSTOMIZED COLD ROOMS |
| BS EN 14963:2006 | Roof coverings. Continuous rooflights of plastics with or without upstands. Classification, requirements and test methods |
| UNE-EN 15732:2014 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) |
| BS EN 15564:2008 | Precast concrete products. Resin bound concrete. Requirements and test methods |
| I.S. EN ISO 13370:2017 | THERMAL PERFORMANCE OF BUILDINGS - HEAT TRANSFER VIA THE GROUND - CALCULATION METHODS (ISO 13370:2017) |
| DIN EN 14318-2:2013-04 | THERMAL INSULATING PRODUCTS FOR BUILDINGS - IN-SITU FORMED DISPENSED RIGID POLYURETHANE (PUR) AND POLYISOCYANURATE (PIR) FOAM PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED INSULATION PRODUCTS |
| DIN EN 15564:2009-05 | PRECAST CONCRETE PRODUCTS - RESIN BOUND CONCRETE - REQUIREMENTS AND TEST METHODS |
| UNI EN 15388 : 2008 | AGGLOMERATED STONE - SLABS AND CUT-TO-SIZE PRODUCTS FOR VANITY AND KITCHEN TOPS |
| UNE-EN 15319:2012 | General principles of design of fibrous (gypsum) plaster works |
| 18/30302605 DC : 0 | BS ISO 16478 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - VACUUM INSULATION PANELS (VIP) - PRODUCTS SPECIFICATION |
| BS EN 16012 : 2012 | THERMAL INSULATION FOR BUILDINGS - REFLECTIVE INSULATION PRODUCTS - DETERMINATION OF THE DECLARED THERMAL PERFORMANCE |
| 15/30313346 DC : 0 | BS EN ISO 6946 - BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHOD |
| 13/30217369 DC : 0 | BS EN 13964 - SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14317-2:2007 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| UNE-EN 16025-1:2016 | Thermal and/or sound insulating products in building construction - Bound EPS ballastings - Part 1: Requirements for factory premixed EPS dry plaster |
| 15/30315093 DC : DRAFT MAY 2015 | BS EN 14303 - THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
| 16/30339855 DC : 0 | BS EN 14041 - RESILIENT, TEXTILE AND LAMINATE FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS |
| 13/30268273 DC : 0 | BS EN 14915 - SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 15037-3:2011-07 | Precast concrete products - Beam-and-block floor systems - Part 3: Clay blocks (includes Amendment A1:2011) |
| 12/30258114 DC : 0 | BS EN 14063-2 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| BS EN 14305:2015 | Thermal insulation products for building equipment and industrial installations. Factory made cellular glass (CG) products. Specification |
| 14/30297213 DC : 0 | BS EN 1473 - INSTALLATION AND EQUIPMENT FOR LIQUEFIED NATURAL GAS - DESIGN OF ONSHORE INSTALLATIONS |
| 16/30332917 DC : 0 | BS EN 13915 - PREFABRICATED GYPSUM PLASTERBOARD PANELS WITH A CELLULAR PAPERBOARD CORE - DEFINITIONS, REQUIREMENTS AND TEST METHODS |
| 15/30288722 DC : 0 | BS ISO 16957 - MEASUREMENT OF APPARENT THERMAL CONDUCTIVITY OF WET POROUS BUILDING MATERIALS BY A PERIODIC METHOD |
| 09/30196505 DC : 0 | BS EN ISO 10077-2 - THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES |
| I.S. EN ISO 12631:2017 | THERMAL PERFORMANCE OF CURTAIN WALLING - CALCULATION OF THERMAL TRANSMITTANCE (ISO 12631:2017) |
| I.S. EN 14304:2015 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
| UNI EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 12602:2016 | Prefabricated reinforced components of autoclaved aerated concrete |
| PREN 13964 : DRAFT 2013 | SUSPENDED CEILINGS - REQUIREMENTS AND TEST METHODS |
| UNI EN 14063-2 : 2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| BS EN 15101-1:2013 | Thermal insulation products for buildings. In-situ formed loose fill cellulose (LFCI) products Specification for the products before installation |
| UNE-EN 15037-4:2010 | Precast concrete products - Beam-and-block floor systems - Part 4: Expanded polystyrene blocks |
| I.S. EN 14063-2:2013 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS - PART 2: SPECIFICATION FOR THE INSTALLED PRODUCTS |
| I.S. EN 15037-3:2009 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 3: CLAY BLOCKS |
| I.S. EN 13369:2018 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| BS EN 15037-4 : 2010 | PRECAST CONCRETE PRODUCTS - BEAM-AND-BLOCK FLOOR SYSTEMS - PART 4: EXPANDED POLYSTYRENE BLOCKS |
| UNE-EN 13815:2012 | Fibrous gypsum plaster casts - Definitions, requirements and test methods |
| 16/30313668 DC : 0 | BS EN 14064-1 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
| BS EN 14313 : 2009 | THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
| 17/30353879 DC : 0 | BS EN 17104 - THERMOPLASTICS RIGID PROTECTIVE WALLCOVERING PANELS FOR INTERNAL USE IN BUILDINGS - PERFORMANCE CHARACTERISTICS |
| 17/30360238 DC : 0 | BS EN 17140 - THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE VACUUM INSULATION PANELS (VIP) - SPECIFICATION |
| EN 16954:2018 | Agglomerated stone - Slabs and cut-to-size products for flooring and stairs (internal and external) |
| EN 13369:2018 | Common rules for precast concrete products |
| I.S. EN 12602:2016 | PREFABRICATED REINFORCED COMPONENTS OF AUTOCLAVED AERATED CONCRETE |
| BS EN 1469:2015 | Natural stone products. Slabs for cladding. Requirements |
| UNE-EN 13964:2016 | Suspended ceilings - Requirements and test methods |
| BS EN 13163 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
| UNE-EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| BS EN 14063-1:2004 | Thermal insulation products for buildings. In-situ formed expanded clay lightweight aggregate products Specification for the loose-fill products before installation |
| BS EN 13170 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| BS EN 14915 : 2013 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 15319:2007 | General principles of design of fibrous (gypsum) plaster works |
| BS EN 13964:2014 | Suspended ceilings. Requirements and test methods |
| BS EN 12058:2015 | Natural stone products. Slabs for floors and stairs. Requirements |
| EN 13055:2016 | Lightweight aggregates |
| EN 12058:2015 | Natural stone products - Slabs for floors and stairs - Requirements |
| EN 13170:2012+A1:2015 | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification |
| CEN ISO/TR 52019-2:2017 | Energy performance of buildings - Hygrothermal performance of building components and building elements - Part 2: Explanation and justification (ISO/TR 52019-2:2017) |
| EN 13169:2012+A1:2015 | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification |
| EN 13167:2012+A1:2015 | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification |
| DIN EN 14474:2005-03 | Precast concrete products - Concrete with wood-chips as aggregate - Requirements and test methods; German version EN 14474:2004 |
| DIN EN ISO 13793:2001-06 | THERMAL PERFORMANCE OF BUILDINGS - THERMAL DESIGN OF FOUNDATIONS TO AVOID FROST HEAVE |
| DIN EN 13055-2:2004-09 | LIGHTWEIGHT AGGREGATES - PART 2: LIGHTWEIGHT AGGREGATES FOR BITUMINOUS MIXTURES AND SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| DIN EN 14915:2013-12 | SOLID WOOD PANELLING AND CLADDING - CHARACTERISTICS, REQUIREMENTS AND MARKING |
| DIN EN 14316-2:2007-04 | Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products |
| EN 13279-1:2008 | Gypsum binders and gypsum plasters - Part 1: Definitions and requirements |
| DIN EN 14063-1:2004-11 | Thermal insulation materials and products - In-situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation; German version EN 14063-1:2004 |
| EN 13165:2012+A2:2016 | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products - Specification |
| ONORM EN 13369 : 2013 | COMMON RULES FOR PRECAST CONCRETE PRODUCTS |
| UNE-EN 14915:2013 | Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| ISO 9346:2007 | Hygrothermal performance of buildings and building materials — Physical quantities for mass transfer — Vocabulary |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| EN 12939:2000 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance |
| ISO 9053:1991 | Acoustics Materials for acoustical applications Determination of airflow resistance |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN 12524 : 2000 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| ISO 8301:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| ISO 8990:1994 | Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded hot box |
| ISO 7345:1987 | Thermal insulation Physical quantities and definitions |
| ISO 10292:1994 | Glass in building — Calculation of steady-state U values (thermal transmittance) of multiple glazing |
| EN 10088-1:2014 | Stainless steels - Part 1: List of stainless steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.