ISO 11452-1:2015
Current
Current
The latest, up-to-date edition.
Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
02-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 11452-1:2015 specifies general conditions, defines terms, gives practical guidelines, and establishes the basic principles of the component tests used in the other parts of ISO 11452 for determining the immunity of electronic components of passenger cars and commercial vehicles to electrical disturbances from narrowband radiated electromagnetic energy, regardless of the vehicle propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).
The electromagnetic disturbances considered are limited to continuous narrowband electromagnetic fields. A wide frequency range (d.c. and 15 Hz to 18 GHz) is allowed for the immunity testing of the components in this and in the other parts of ISO 11452.
| DevelopmentNote |
Supersedes ISO/DIS 11452-1. (06/2015)
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-ISO 11452-1 : 2015 | Identical |
| BS ISO 11452-1:2015 | Identical |
| NEN ISO 11452-1 : 2015 | Identical |
| UNE 26472-1:1998 | Identical |
| DIN ISO 11452-1:2000-03 | Identical |
| BS ISO 11452-3:2016 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Transverse electromagnetic (TEM) cell |
| SAE J1113/1_201310 | Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz) |
| 17/30341351 DC : 0 | BS ISO 11452-2 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: ABSORBER-LINED SHIELDED ENCLOSURE |
| 08/30190852 DC : DRAFT OCT 2008 | BS EN 61000-4-21 ED2 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-21: TESTING AND MEASUREMENT TECHNIQUES - REVERBERATION CHAMBER TEST METHODS |
| SAE J1113/21_201305 | Electronmagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields, 30 MHz to 18 GHz, Absorber-Lined Chamber |
| SAE J ISO 13766 : FEB 2003 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| PREN 15194 : DRAFT 2015 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| SAE J2954_201711 | Wireless Power Transfer for Light-Duty Plug-In/Electric Vehicles and Alignment Methodology |
| ISO 7634:2007 | Road vehicles Compressed air braking systems for towed vehicles including those with electronic braking control functions Test procedures |
| I.S. EN 62132-4:2006 | INTEGRATED CIRCUITS - MEASUREMENT OF ELECTROMAGNETIC IMMUNITY 150 KHZ TO 1 GHZ - PART 4: DIRECT RF POWER INJECTION METHOD |
| 17/30358367 DC : 0 | BS EN 17128 - NON-APPROVED LIGHT MOTORIZED VEHICLES FOR THE TRANSPORTATION OF PERSONS AND GOODS AND RELATED FACILITIES - PERSONAL LIGHT ELECTRIC VEHICLES (PLEV) - SAFETY REQUIREMENTS AND TEST METHODS |
| 01/714099 DC : DRAFT OCT 2001 | ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
| EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| EN 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| 07/30147416 DC : 0 | BS ISO 10605 - ROAD VEHICLES - TEST METHODS FOR ELECTRICAL DISTURBANCES FROM ELECTROSTATIC DISCHARGE |
| EN 61851-21-1:2017/AC:2017-11 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY (IEC 61851-21-1:2017) |
| ISO 11452-11:2010 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 11: Reverberation chamber |
| 06/30151992 DC : DRAFT JUN 2006 | BS ISO 22239-2 - ROAD VEHICLES - CHILD SEAT PRESENCE AND ORIENTATION DETECTION SYSTEM (ISOCARE) - PART 2: RESONATOR SPECIFICATION |
| 13/30261304 DC : 0 | BS ISO 11452-8 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 8: IMMUNITY TO MAGNETIC FIELDS |
| 07/30157503 DC : 0 | BS ISO 11452-10 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 10: CONDUCTED IMMUNITY IN THE EXTENDED AUDIO FREQUENCY RANGE |
| SAE J2578_201408 | Recommended Practice for General Fuel Cell Vehicle Safety |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| BS EN 15194:2017 | Cycles. Electrically power assisted cycles. EPAC Bicycles |
| IEC 60839-10-1:1995 | Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars |
| CEI 79-51 : 2006 | COMMUNICATION PROTOCOL FOR SECURITY INFORMATION (ALARMS) - PART 1: TRANSPORT LAYERS |
| NF ISO 11452-5 : 2004 | ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 5: STRIP LINE |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| UNE-EN 13309:2010 | Construction machinery - Electromagnetic compatibility of machines with internal power supply |
| ISO 14982:1998 | Agricultural and forestry machinery Electromagnetic compatibility Test methods and acceptance criteria |
| I.S. EN 13309:2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| I.S. EN ISO 14982:2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| ISO/TR 12155:1994 | Commercial vehicles Obstacle detection device during reversing Requirements and tests |
| BS EN 61851-21-1:2017 | Electric vehicle conductive charging system Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply |
| BS ISO 11452-11:2010 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Reverberation chamber |
| BS ISO 7634:2007 | Road vehicles. Compressed air braking systems for towed vehicles including those with electronic braking control functions .Test procedures |
| 15/30321305 DC : 0 | BS EN 15194 - CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| CEI EN 62132-4 : 2006 | CIRCUITS INTEGRES - MESURE DE L'IMMUNITE ELECTROMAGNETIQUE 150 KHZ A 1 GHZ - PARTIE 4: METHODE D'INJECTION DIRECTE DE PUISSANCE RF |
| 06/30157139 DC : 0 | |
| 00/706017 DC : DRAFT MAR 2000 | BS ISO 15763 - ROAD VEHICLES - ALARM SYSTEMS FOR COMMERCIAL VEHICLES |
| NF ISO 13766 : 1999 | EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| ISO 13766-1:2018 | Earth-moving and building construction machinery — Electromagnetic compatibility (EMC) of machines with internal electrical power supply — Part 1: General EMC requirements under typical electromagnetic environmental conditions |
| NF ISO 12097-3 : 2003 | ROAD VEHICLES - AIRBAG COMPONENTS - PART 3: TESTING OF INFLATOR ASSEMBLIES |
| ISO 11835:2002 | Road vehicles Motor vehicles with antilock braking systems (ABS) Measurement of braking performance |
| I.S. EN 61851-21-1:2017 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 21-1: ELECTRIC VEHICLE ON-BOARD CHARGER EMC REQUIREMENTS FOR CONDUCTIVE CONNECTION TO AN AC/DC SUPPLY |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| I.S. EN 15194:2017 | CYCLES - ELECTRICALLY POWER ASSISTED CYCLES - EPAC BICYCLES |
| 04/30089279 DC : DRAFT FEB 2004 | ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
| UNI EN 13309 : 2010 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| UNI EN ISO 14982 : 2009 | AGRICULTURAL AND FORESTRY MACHINERY - ELECTROMAGNETIC COMPATIBILITY - TEST METHODS AND ACCEPTANCE CRITERIA |
| ISO 15763:2002 | Road vehicles — Alarm systems for buses and commercial vehicles of maximum authorized total mass greater than 3,5 t |
| 10/30205310 DC : 0 | BS ISO 11452-4 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: HARNESS EXCITATION METHODS |
| 03/301512 DC : DRAFT JAN 2003 | BS ISO 11452-2 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 2: ABSORBER-LINED SHIELDED ENCLOSURE |
| 16/30316581 DC : 0 | BS EN ISO 13766-2 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY - PART 2: EMC REQUIREMENTS UNDER THE ASPECT OF FUNCTIONAL SAFETY |
| 16/30316578 DC : 0 | BS EN ISO 13766-1 - EARTH-MOVING- AND BUILDING CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL ELECTRICAL POWER SUPPLY - PART 1: GENERAL EMC REQUIREMENTS UNDER TYPICAL EMC ENVIRONMENTAL CONDITIONS |
| 00/709873 DC : DRAFT JUN 2000 | ISO/DIS 11452-5 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES BY NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 5: STRIPLINE |
| 05/30114081 DC : DRAFT SEP 2005 | ISO 11452-8 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FOR NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 8: IMMUNITY TO RADIATED MAGNETIC FIELDS |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| 08/30172385 DC : DRAFT OCT 2008 | BS ISO 11452-11 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 11: RADIATED IMMUNITY TEST METHOD USING A REVERBERATION CHAMBER |
| 01/707379 DC : DRAFT APR 2001 | ISO/DIS 11452-7 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION |
| SAE J2357_201211 | Application Guidelines for Electronically Driven and/or Controlled Exterior Automotive Lighting Equipment |
| BS ISO 10605 : 2008 | ROAD VEHICLES - TEST METHODS FOR ELECTRICAL DISTURBANCES FROM ELECTROSTATIC DISCHARGE |
| 15/30304065 DC : 0 | BS ISO 11452-3 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 3: TRANSVERSE ELECTROMAGNETIC MODE (TEM) CELL |
| 05/30127980 DC : DRAFT JAN 2005 | ISO 13766 - EARTH-MOVING MACHINERY - ELECTROMAGNETIC COMPATIBILITY |
| NF ISO 11452-7 : 2004 | ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 7: DIRECT RADIO FREQUENCY (RF) POWER INJECTION |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| IEC 61851-21-1:2017 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
| DIN EN ISO 14982:2009-12 | Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| IEC 62132-4:2006 | Integrated circuits - Measurement of electromagnetic immunity 150 kHz to 1 GHz - Part 4: Direct RF power injection method |
| EN ISO 14982:2009 | Agricultural and forestry machinery - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998) |
| EN 15194:2017 | Cycles - Electrically power assisted cycles - EPAC Bicycles |
| ISO 11452-10:2009 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| BS ISO 11452-9:2012 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Portable transmitters |
| BS ISO 7635:2006 | Road vehicles. Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions. Test procedures |
| BS ISO 11452-8:2015 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Immunity to magnetic fields |
| BS EN 62132-4:2006 | Integrated circuits. Measurement of electromagnetic immunity. 150 kHz to 1 GHz Direct RF power injection method |
| 08/30159225 DC : 0 | BS ISO 11452-9 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 9: PORTABLE TRANSMITTERS |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| BS ISO 11452-4:2011 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Harness excitation methods |
| 03/317483 DC : DRAFT OCT 2003 | ISO 11452-4 - ROAD VEHICLES - COMPONENT TEST METHODS FOR ELECTRICAL DISTURBANCES FROM NARROWBAND RADIATED ELECTROMAGNETIC ENERGY - PART 4: BULK CURRENT INJECTION (BCI) |
| 07/30171041 DC : DRAFT AUG 2007 | DD IEC/TS 61000-1-2 -ELECTROMAGNETIC COMPATIBILITY -GENERAL - METHODOLOGY FOR THE ACHIEVEMENT OF FUNCTIONAL SAFETY OF ELECTRICAL AND ELECTRONIC EQUIPMENT WITH REGARD TO ELECTROMAGNETIC PHENOMENA |
| BS ISO 11452-10:2009 | Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Immunity to conducted disturbances in the extended audio frequency range |
| ISO/TR 15497:2000 | Road vehicles Development guidelines for vehicle based software |
| CEI 79-56 : 2009 | BLACK BOX TYPE SYSTEMS: FUNCTIONAL REQUIREMENTS AND TESTS |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| ISO/TS 22239-2:2009 | Road vehicles Child seat presence and orientation detection system (CPOD) Part 2: Resonator specification |
| ISO 7635:2006 | Road vehicles Air and air/hydraulic braking systems of motor vehicles, including those with electronic control functions Test procedures |
| ISO 11452-9:2012 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters |
| ISO 11452-8:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
| DIN EN 13309:2010-12 | CONSTRUCTION MACHINERY - ELECTROMAGNETIC COMPATIBILITY OF MACHINES WITH INTERNAL POWER SUPPLY |
| BS EN ISO 14982:2009 | Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria |
| BS EN 13309:2010 | Construction machinery. Electromagnetic compatibility of machines with internal power supply |
| IEC 60050-726:1982 | International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.