ISO 12944-2:2017
Current
Current
The latest, up-to-date edition.
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
13-11-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 12944-2:2017 deals with the classification of the principal environments to which steel structures are exposed, and the corrosivity of these environments. ISO 12944-2:2017
- defines atmospheric-corrosivity categories, based on mass loss (or thickness loss) by standard specimens, and describes typical natural atmospheric environments to which steel structures are exposed, giving advice on the estimation of the corrosivity,
- describes different categories of environment for structures immersed in water or buried in soil, and
- gives information on some special corrosion stresses that can cause a significant increase in corrosion rate or place higher demands on the performance of the protective paint system.
The corrosion stresses associated with a particular environment or corrosivity category represent one essential parameter governing the selection of protective paint systems.
| Committee |
ISO/TC 35/SC 14
|
| DevelopmentNote |
Supersedes ISO/DIS 12944-2. (11/2017)
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 12944-2 : 2018 | Identical |
| NEN EN ISO 12944-2 : 2018 | Identical |
| SS-EN ISO 12944-2:2017 | Identical |
| DIN EN ISO 12944-2:2016-02 (Draft) | Identical |
| UNE-EN ISO 12944-2:2018 | Identical |
| UNI EN ISO 12944-2:2018 | Identical |
| NF EN ISO 12944-2 : 2017 | Identical |
| DIN EN ISO 12944-2:2018-04 | Identical |
| SN EN ISO 12944-2:2018 | Identical |
| I.S. EN ISO 12944-2:2017 | Identical |
| I.S. EN ISO 12944-2:1998 | Identical |
| EN ISO 12944-2:2017 | Identical |
| PN EN ISO 12944-2 : 2018 | Identical |
| NS EN ISO 12944-2 : 2017 | Identical |
| NBN EN ISO 12944-2 : 1998 | Identical |
| UNI EN ISO 12944-2 : 2001 | Identical |
| UNE-EN ISO 12944-2:1999 | Identical |
| BS EN ISO 12944-2:2017 | Identical |
| BS EN ISO 12944-2:1998 | Identical |
| SN EN ISO 12944-2 : 1998 | Identical |
| DIN EN 15714-3:2010-02 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| I.S. EN ISO 13174:2012 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS (ISO 13174:2012) |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| I.S. EN 15714-3:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| ISO 15686-7:2017 | Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice |
| UNI EN 15714-4 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS EN 593:2017 | Industrial valves. Metallic butterfly valves for general purposes |
| BS ISO 15686-1:2011 | Buildings and constructed assets. Service life planning General principles and framework |
| BS EN 1090-5:2017 | Execution of steel structures and aluminium structures Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| BS EN ISO 29601:2011 | Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film |
| ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| 05/30138471 DC : DRAFT AUG 2005 | EN ISO 16276-2 - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF, AND ACCEPTANCE CRITERIA FOR, THE ADHESION/COHESION (FRACTURE STRENGTH) OF A DRY FILM - PART 2: CROSS-CUT TESTING AND X-CUT TESTING |
| 02/123296 DC : DRAFT SEP 2002 | BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| DD ENV 12837:2000 | Paints and varnishes. Qualification of inspectors for corrosion protection of steel structures by protective paint systems |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| UNI EN ISO 11303 : 2008 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| ISO 13823:2008 | General principles on the design of structures for durability |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| 18/30368654 DC : 0 | BS EN 488 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination |
| I.S. EN 15714-2:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNI EN ISO 13174 : 2013 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| BS EN ISO 12944-8:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Development of specifications for new work and maintenance |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| I.S. EN 488:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 1670:2007-06 | Building hardware - Corrosion resistance - Requirements and test methods |
| DIN EN ISO 8501-3:2007-10 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006) |
| ISO 13174:2012 | Cathodic protection of harbour installations |
| BS EN ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Cross-cut testing and X-cut testing |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| DIN EN ISO 16276-1:2007-08 | CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF, AND ACCEPTANCE CRITERIA FOR, THE ADHESION/COHESION (FRACTURE STRENGTH) OF A COATING - PART 1: PULL-OFF TESTING |
| DIN EN 1090-5:2017-07 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products - Part 3: Products for building interior applications |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| NBR 15926-2 : 2011 ERRATA 2011 | EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| 16/30277023 DC : 0 | BS ISO 15686-7 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 7: PERFORMANCE EVALUATION FOR FEEDBACK OF SERVICE LIFE DATA FROM PRACTICE |
| BS EN ISO 11303:2008 | Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion |
| 03/309848 DC : DRAFT JUNE 2003 | EN 13523-19 - COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| UNI EN 13523-19 : 2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| 16/30327440 DC : 0 | BS EN ISO 12944-3 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE COATING SYSTEMS - PART 3: DESIGN CONSIDERATIONS |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| I.S. EN ISO 12944-5:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018) |
| SSPC-PAINT 45 : 2013 | TWO-COMPONENT, THICK-FILM POLYUREA AND POLYUREA/POLYURETHANE HYBRID COATINGS, PERFORMANCE-BASED |
| 16/30339483 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN 15714-3:2009 | Industrial valves. Actuators Pneumatic part-turn actuators for industrial valves. Basic requirements |
| DIN 1988-7 E : 1988 | DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE) |
| I.S. EN ISO 12944-1:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 1: GENERAL INTRODUCTION (ISO 12944-1:2017) |
| BS ISO 15686-7:2017 | Buildings and constructed assets. Service life planning Performance evaluation for feedback of service life data from practice |
| I.S. EN 593:2017 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| I.S. EN ISO 29601:2011 | PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
| UNI EN ISO 21457 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN ISO 21457:2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS |
| ISO 15686-8:2008 | Buildings and constructed assets — Service-life planning — Part 8: Reference service life and service-life estimation |
| CEN/CLC Guide 32:2016 | Guide for addressing climate change adaptation in standards |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| UNE-EN 1993-1-3:2012 | Eurocode 3 - Design of steel structures - Part 1-3: General rules - Supplementary rules for cold-formed members and sheeting |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| EN ISO 12944-1:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 1: General introduction (ISO 12944-1:2017) |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN ISO 11303:2008-08 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
| I.S. EN 1670:2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| VDI 2485:2014-04 | Planning of maintenance for cranes |
| VDI/VDE 3844:2014-01 | Industrial process control valves - Actuators for control valves |
| BS 7079-A3(2006) : 2006 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 3: PREPARATION GRADES OF WELDS, EDGES AND OTHER AREAS WITH SURFACE IMPERFECTIONS |
| DIN EN ISO 21457:2010-12 | Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010) |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| DIN 55634:2016-10 (Draft) | PAINTS, VARNISHES AND COATINGS - CORROSION PROTECTION OF SUPPORTING THIN-WALLED BUILDING COMPONENTS MADE OF STEEL |
| I.S. EN 12500:2000 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN ATMOSPHERIC ENVIRONMENT - CLASSIFICATION, DETERMINATION AND ESTIMATION OF CORROSIVITY OF ATMOSPHERIC ENVIRONMENTS |
| 13/30254279 DC : 0 | BS ISO 16488 - MARINE FINFISH FARMS - OPEN NET CAGE - DESIGN AND OPERATION |
| 15/30294686 DC : 0 | BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| 08/30187521 DC : 0 | BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES |
| AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| DIN EN ISO 13174:2013-05 | CATHODIC PROTECTION OF HARBOUR INSTALLATIONS (ISO 13174:2012) |
| BS ISO 19354:2016 | Ships and marine technology. Marine cranes. General requirements |
| PD ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| BS EN 15714-2:2009 | Industrial valves. Actuators Electric actuators for industrial valves. Basic requirements |
| EN ISO 12944-5:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| UNE-EN ISO 29601:2011 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| UNI EN 15714-3 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 3: PNEUMATIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| I.S. EN ISO 2063-2:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| I.S. EN 1090-5:2017 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 5: TECHNICAL REQUIREMENTS FOR COLD-FORMED STRUCTURAL ALUMINIUM ELEMENTS AND COLD-FORMED STRUCTURES FOR ROOF, CEILING, FLOOR AND WALL APPLICATIONS |
| EN ISO 12944-3:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017) |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| SSPC-PAINT 46 : 2015 | ELASTOMERIC, WATER BASED, HIGH BUILD, FLAT, PERFORMANCE-BASED COATING FOR MASONRY AND CONCRETE |
| ISO 19354:2016 | Ships and marine technology — Marine cranes — General requirements |
| ISO 16488:2015 | Marine finfish farms Open net cage Design and operation |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| DIN EN 13523-19:2011-09 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN ISO 2063:2005-05 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| DIN EN 488:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
| BS EN ISO 8501-3:2007 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness Preparation grades of welds, edges and other areas with surface imperfections |
| BS EN 10169-3:2003 | Continuously organic coated (coil coated) steel flat products Products for building interior applications |
| BS EN 1993-1-3:2006 | Eurocode 3. Design of steel structures General rules - Supplementary rules for cold-formed members and sheeting |
| ISO 21457:2010 | Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems |
| UNE-EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| I.S. EN ISO 2810:2004 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| EN 488:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN ISO 29601:2011 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| UNI EN 1993-1-3 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
| UNI EN 1670 : 2007 | BUILDING HARDWARE - CORROSION RESISTANCE - REQUIREMENTS AND TEST METHODS |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| BS EN 15714-4:2009 | Industrial valves. Actuators Hydraulic part-turn actuators for industrial valves. Basic requirements |
| EN 15714-2:2009 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN ISO 2063:2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| BS ISO 11303 : 2002 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| UNI EN 15714-2 : 2009 | INDUSTRIAL VALVES - ACTUATORS - PART 2: ELECTRIC ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| BS ISO 15686-8:2008 | Buildings and constructed assets. Service-life planning Reference service life and service-life estimation |
| NF ENV 1090-1 : 96 FD | EXECUTION OF STEEL STRUCTURES - PART 1: GENERAL RULES AND RULES FOR BUILDINGS |
| 16/30234880 DC : 0 | BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| UNE-EN 15714-4:2010 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| 14/30273520 DC : 0 | BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
| PREN 593 : DRAFT 2016 | INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES FOR GENERAL PURPOSES |
| BS EN ISO 21457:2010 | Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems |
| ISO 20313:2018 | Ships and marine technology — Cathodic protection of ships |
| I.S. EN ISO 12944-3:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
| BS ISO 8501-3 : 2006 AMD 17354 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - VISUAL ASSESSMENT OF SURFACE CLEANLINESS - PART 3: PREPARATION GRADES OF WELDS, EDGES AND OTHER AREAS WITH SURFACE IMPERFECTIONS |
| DIN EN 15714-4:2010-02 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| S.R. CWA 16221:2010 | VEHICLE SECURITY BARRIERS - PERFORMANCE REQUIREMENTS, TEST METHODS AND GUIDANCE ON APPLICATION |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| BS EN ISO 2063-2:2017 | Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
| BS EN ISO 12944-3:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Design considerations |
| BS EN ISO 12944-1:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems General introduction |
| EN ISO 2063-2:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
| I.S. EN 13523-19:2011 | COIL COATED METALS - TEST METHODS - PART 19: PANEL DESIGN AND METHOD OF ATMOSPHERIC EXPOSURE TESTING |
| DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Pull-off testing |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| ISO 29601:2011 | Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| UNE-EN 488:2012 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
| BS EN 1670:2007 | Building hardware. Corrosion resistance. Requirements and test methods |
| BS EN 488:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 1: Pull-off testing |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN 15081:2007 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN 15714-3:2009 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| EN ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
| EN ISO 11303:2008 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
| EN ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007) |
| EN 15714-4:2009 | Industrial valves - Actuators - Part 4: Hydraulic part-turn actuators for industrial valves - Basic requirements |
| EN ISO 21457:2010 | Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010) |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| EN ISO 8501-3:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2006) |
| 09/30172555 DC : 0 | BS ISO 15686-1 REV - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 1: GENERAL PRINCIPLES AND FRAMEWORK |
| 16/30337299 DC : 0 | BS EN ISO 12944-8 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE |
| UNE-EN 15714-3:2010 | Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements |
| DIN EN ISO 29601:2011-07 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| 08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| BS EN ISO 13174:2012 | Cathodic protection of harbour installations |
| 01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| DIN 1988-7:2004-12 | CODES OF PRACTICE FOR DRINKING WATER INSTALLATIONS (TRWI) - PART 7: PREVENTION OF CORROSION DAMAGE AND CALCAREOUS DEPOSIT FORMATION - DVGW CODE OF PRACTICE |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| I.S. EN 15714-4:2009 | INDUSTRIAL VALVES - ACTUATORS - PART 4: HYDRAULIC PART-TURN ACTUATORS FOR INDUSTRIAL VALVES - BASIC REQUIREMENTS |
| UNI EN ISO 29601 : 2011 | PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
| DD ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination |
| BS ISO 16488:2015 | Marine finfish farms. Open net cage. Design and operation |
| BS 7079-A3:2002 | Preparation of steel substrates before application of paints and related products. Visual assessment of surface cleanliness Preparation grades of welds, cut edges and other areas with surface imperfections - A3: Preparation grades of welds, cut edges and other areas with surface imperfections |
| UNE-EN 15714-2:2010 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| AEP-61 : 2009 | PERFORMANCE REQUIREMENTS FOR UNDERWATER HULL PAINT SYSTEMS |
| DIN EN 15714-2:2010-02 | Industrial valves - Actuators - Part 2: Electric actuators for industrial valves - Basic requirements |
| I.S. EN ISO 11303:2008 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| BS EN 13523-19:2011 | Coil coated metals. Test methods Panel design and method of atmospheric exposure testing |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| ISO 2063-2:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
| DIN EN ISO 12944-5:2016-06 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| PREN 488 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - STEEL VALVE ASSEMBLY FOR STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| EN ISO 12944-8:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) |
| I.S. EN ISO 12944-8:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017) |
| ISO 11303:2002 | Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion |
| BS EN 12500:2000 | Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments |
| BS EN 15081:2007 | Industrial valves. Mounting kits for part-turn valve actuator attachment |
| EN ISO 13174:2012 | Cathodic protection of harbour installations (ISO 13174:2012) |
| EN 1090-5:2017 | Execution of steel structures and aluminium structures - Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications |
| EN 13523-19:2011 | Coil coated metals - Test methods - Part 19: Panel design and method of atmospheric exposure testing |
| DIN 1988-7:1988-12 | DRINKING WATER SUPPLY SYSTEMS - PART 7: PREVENTION OF CORROSION AND SCALING - (DVGW CODE OF PRACTICE) |
| DIN EN ISO 16276-2:2007-08 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
| EN 12500:2000 | Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments |
| DIN EN 15081:2008-03 | Industrial valves - Mounting kits for part-turn valve actuator attachment |
| ANSI/IES RP-47:2023 | RECOMMENDED PRACTICE: LANDSCAPE LIGHTING AN AMERICAN NATIONAL STANDARD |
| SSPC-Paint 46:2024 | Elastomeric, Water Based, High-Build, Flat, Performance-Based Coating for Masonry and Concrete |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| EN 12501-1:2003 | Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.