ISO 13373-1:2002
Current
Current
The latest, up-to-date edition.
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
28-02-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
This part of ISO 13373 provides general guidelines for the measurement and data collection functions of machinery
vibration for condition monitoring. It is intended to promote consistency of measurement procedures and practices,
which usually concentrate on rotating machines.
Because of the diversity of approaches to condition monitoring, recommendations specific to a particular kind of
monitoring programme will be addressed in additional parts of ISO 13373.
This part of ISO 13373 is a basic document which presents recommendations of a general nature, encompassing
measurement methods,
measurement parameters,
transducer selection,
transducer location,
transducer attachment,
data collection,
machine operating conditions,
vibration monitoring systems,
signal conditioning systems,
interfaces with data-processing systems,
continuous monitoring, and
periodic monitoring.
The vibratory conditions of a machine can be monitored by vibration measurements on the bearing or housing
structure and/or by vibration measurements of the rotating elements of the machine. In addition, measurements
can be continuous or non-continuous. This part of ISO 13373 provides guidance on the types of measurements
recommended in both the continuous and the non-continuous modes.
It is emphasized that this part of ISO 13373 addresses only the procedures for vibration condition monitoring of
machines. In many cases, the complete condition monitoring and diagnostics of a machine can also include other
parameters, such as thermography, oil analysis, ferrography, process variations, temperatures and pressures.
These non-vibratory parameters will be included in other International Standards.
This part of ISO 13373 covers rotating machines. However, many of the procedures included can be applied to
other types of machines, for example reciprocating machines.
| Committee |
ISO/TC 108/SC 2
|
| DevelopmentNote |
Supersedes ISO/FDIS 13373-1 (03/2002)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| SS-ISO 13373-1:2021 | Identical |
| GOST R ISO 13373-1 : 2009 | Identical |
| BS ISO 13373-1:2002 | Identical |
| NEN ISO 13373-1 : 2002 | Identical |
| UNI ISO 13373-1 : 2006 | Identical |
| BIS IS/ISO 13373-1 : 2002(R2016) | Identical |
| NF ISO 13373-1 : 2003 | Identical |
| SS-ISO 13373-1:2002 | Identical |
| DIN ISO 13373-1:2002-07 | Identical |
| ISO 21940-13:2012 | Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors |
| 16/30341593 DC : 0 | BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| 09/30195890 DC : DRAFT OCT 2009 | BS ISO 13379-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES |
| DIN ISO 10816-7:2009-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 7: ROTODYNAMIC PUMPS FOR INDUSTRIAL APPLICATIONS, INCLUDING MEASUREMENTS ON ROTATING SHAFTS |
| ISO/TR 17243-2:2017 | Machine tool spindles Evaluation of spindle vibrations by measurements on non-rotating parts Part 2: Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| ISO 13373-7:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| UNI ISO 10816-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 16/30340907 DC : 0 | BS EN 61400-25-6 ED 2.0 - WIND TURBINES - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING |
| PD ISO/TR 17243-1:2014 | Machine tool spindles. Evaluation of machine tool spindle vibrations by measurements on spindle housing Spindles with rolling element bearings and integral drives operating at speeds between 600 min<sup>-1</sup> and 30 000 min<sup>-1</sup> |
| BS ISO 13381-1:2015 | Condition monitoring and diagnostics of machines. Prognostics General guidelines |
| BS ISO 7919-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES |
| PD ISO/TR 17243-2:2017 | Machine tool spindles. Evaluation of spindle vibrations by measurements on non-rotating parts Direct-driven spindles and belt-driven spindles with rolling element bearings operating at speeds between 600 r/min and 30 000 r/min |
| CEI EN 61400-25-6 : 2011 | WIND ENERGY GENERATION SYSTEMS - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING |
| BS ISO 13380:2002 | Condition monitoring and diagnostics of machines. General guidelines on using performance parameters |
| BS ISO 13379:2003 | Condition monitoring and diagnostics of machines. General guidelines on data interpretation and diagnostics techniques |
| 09/30192810 DC : DRAFT JAN 2009 | BS ISO 10816-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| I.S. EN 61400-25-6:2017 | WIND ENERGY GENERATION SYSTEMS - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING |
| IEC TS 60034-32:2016 | Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings |
| BS ISO 10816-4 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| ISO 13379-1:2012 | Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 1: General guidelines |
| EN 61400-25-6:2017 | Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring |
| 15/30297073 DC : 0 | BS ISO 13373-9 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 9: DIAGNOSTIC TECHNIQUES FOR ELECTRIC MOTORS |
| 14/30273218 DC : 0 | BS ISO 13381-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - PROGNOSTICS - PART 1: GENERAL GUIDELINES |
| BS ISO 13379-1:2012 | Condition monitoring and diagnostics of machines. Data interpretation and diagnostics techniques General guidelines |
| BS ISO 10816-7:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| 05/30134023 DC : DRAFT MAY 2005 | ISO 13374-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA PROCESSING, COMMUNICATION AND PRESENTATION - PART 2: DATA-PROCESSING |
| DIN ISO 2954:2012-10 | Mechanical vibration of rotating and reciprocating machinery - Requirements for instruments for measuring vibration severity (ISO 2954:2012) |
| BS ISO 14839-4:2012 | Mechanical vibration. Vibration of rotating machinery equipped with active magnetic bearings Technical guidelines |
| BS ISO 13373-9:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for electric motors |
| DIN ISO 13373-3:2015-12 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS (ISO 13373-3:2015) |
| 08/30184178 DC : DRAFT JUNE 2008 | BS EN 61400-25-6 - WIND TURBINES - PART 25-6: COMMUNICATIONS FOR MONITORING AND CONTROL OF WIND POWER PLANTS - LOGICAL NODE CLASSES AND DATA CLASSES FOR CONDITION MONITORING |
| 14/30297061 DC : 0 | BS ISO 13373-3 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 3: GUIDELINES FOR VIBRATION DIAGNOSIS |
| ISO 21289:2008 | Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data |
| BS ISO 10816-3 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU |
| ISO 10816-21:2015 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 21: Horizontal axis wind turbines with gearbox |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| VDI 3832:2013-04 | Measurement of structure-borne sound of rolling element bearings in machines and plants for evaluation of condition |
| VDI 3839 Blatt 6:2007-10 | Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with machine sets in hydraulic power stations |
| VDI 3836:2012-02 | Measurement and evaluation of mechanical vibration of screw-type compressors and Root blowers - Addition to DIN ISO 10816-3 |
| VDI 4550 Blatt 1:2017-04 | Vibration analysis - Procedures and presentation of results - Terminology and basic principles |
| VDI 3839 Blatt 7:2012-05 | Instructions on measuring and interpreting the vibration of machines - Typical vibration patterns with centrifugal pumps |
| BS ISO 13373-7:2017 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants |
| 16/30341590 DC : 0 | BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| DIN ISO 10816-21:2015-08 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX (ISO 10816-21:2015) |
| UNI ISO 13380 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS |
| 00/702358 DC : DRAFT JAN 2000 | ISO/DIS 13380 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - USE OF PERFORMANCE PARAMETERS - GENERAL GUIDELINES |
| BS ISO 7919-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| ISO 13374-2:2007 | Condition monitoring and diagnostics of machines Data processing, communication and presentation Part 2: Data processing |
| BS ISO 10816-21:2015 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Horizontal axis wind turbines with gearbox |
| BS ISO 21940-13:2012 | Mechanical vibration. Rotor balancing Criteria and safeguards for the insitu balancing of medium and large rotors |
| 09/30192807 DC : DRAFT FEB 2009 | BS ISO 7919-2 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| PD ISO/TR 19201:2013 | Mechanical vibration. Methodology for selecting appropriate machinery vibration standards |
| 14/30265061 DC : 0 | BS ISO 10816-21 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 21: HORIZONTAL AXIS WIND TURBINES WITH GEARBOX |
| 09/30190938 DC : DRAFT JAN 2009 | BS ISO 7919-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines). General requirements |
| UNI ISO 13374-2 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA PROCESSING, COMMUNICATION AND PRESENTATION - PART 2: DATA PROCESSING |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 10816-7:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts |
| ISO 13373-9:2017 | Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors |
| ISO 16587:2004 | Mechanical vibration and shock — Performance parameters for condition monitoring of structures |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 13373-3:2015 | Condition monitoring and diagnostics of machines Vibration condition monitoring Part 3: Guidelines for vibration diagnosis |
| ISO 14661:2000 | Thermal turbines for industrial applications (steam turbines, gas expansion turbines) General requirements |
| UNI ISO 13379 : 2010 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES |
| UNI ISO 21940-13 : 2012 | MECHANICAL VIBRATION - ROTOR BALANCING - PART 13: CRITERIA AND SAFEGUARDS FOR THE IN-SITU BALANCING OF MEDIUM AND LARGE ROTORS |
| DIN ISO 7919-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| UNI ISO 7919-4 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| 16/30341587 DC : 0 | BS ISO 7919-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 3: COUPLED INDUSTRIAL MACHINES |
| 03/306196 DC : DRAFT APR 2003 | ISO 19860 - GAS TURBINES - DATA ACQUISITION AND TREND MONITORING SYSTEM REQUIREMENTS FOR GAS TURBINE INSTALLATIONS |
| 09/30190941 DC : DRAFT JAN 2009 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS ISO 13373-3:2015 | Condition monitoring and diagnostics of machines. Vibration condition monitoring Guidelines for vibration diagnosis |
| 16/30341596 DC : 0 | BS ISO 10816-4 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| BS ISO 13374-2:2007 | Condition monitoring and diagnostics of machines. Data processing, communication and presentation Data processing |
| DIN ISO 21940-13:2012-08 | Mechanical vibration - Rotor balancing - Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors (ISO 21940-13:2012) |
| 16/30297787 DC : 0 | BS ISO 16079-1 - CONDITION MONITORING AND DIAGNOSTICS OF WIND TURBINES - PART 1: GENERAL GUIDELINES |
| BS ISO 19860:2005 | Gas turbines. Data acquisition and trend monitoring system requirements for gas turbine installations |
| BS EN 61400-25-6:2017 | Wind energy generation systems Communications for monitoring and control of wind power plants. Logical node classes and data classes for condition monitoring |
| UNI ISO 10816-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| API 691 : 2017 | RISK-BASED MACHINERY MANAGEMENT |
| BS ISO 7919-4 : 2009 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 4: GAS TURBINE SETS WITH FLUID-FILM BEARINGS |
| ISO 17359:2018 | Condition monitoring and diagnostics of machines — General guidelines |
| ISO/TR 17243-1:2014 | Machine tool spindles Evaluation of machine tool spindle vibrations by measurements on spindle housing Part 1: Spindles with rolling element bearings and integral drives operating at speeds between 600 min-1 and 30 000 min-1 |
| ISO 13381-1:2015 | Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines |
| ISO 13374-1:2003 | Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines |
| ISO 19860:2005 | Gas turbines — Data acquisition and trend monitoring system requirements for gas turbine installations |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| 01/708610 DC : DRAFT JUNE 2001 | ISO/DIS 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES |
| 16/30334059 DC : 0 | BS ISO 13373-7 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - VIBRATION CONDITION MONITORING - PART 7: DIAGNOSTIC TECHNIQUES FOR MACHINE SETS IN HYDRAULIC POWER GENERATING AND PUMP-STORAGE PLANTS |
| BS ISO 13374-1:2003 | Condition monitoring and diagnostics of machines. Data processing, communication and presentation General guidelines |
| UNI ISO 13379-1 : 2012 | CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - DATA INTERPRETATION AND DIAGNOSTICS TECHNIQUES - PART 1: GENERAL GUIDELINES |
| BS ISO 10816-2:2009 | Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min |
| BS ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity |
| 18/30369590 DC : DRAFT APR 2018 | BS ISO 18434-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES SYSTEMS - THERMOGRAPHY - PART 2: IMAGE INTERPRETATION AND DIAGNOSTICS |
| ISO 14839-4:2012 | Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines |
| BS ISO 21289:2008 | Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data |
| PD IEC/TS 60034-32:2016 | Rotating electrical machines Measurement of stator end-winding vibration at form-wound windings |
| BS ISO 16587:2004 | Mechanical vibration and shock. Performance parameters for condition monitoring of structures |
| ISO 13380:2002 | Condition monitoring and diagnostics of machines General guidelines on using performance parameters |
| ISO/TR 19201:2013 | Mechanical vibration — Methodology for selecting appropriate machinery vibration standards |
| UNI ISO 7919-2 : 2010 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON ROTATING SHAFTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| IEC TS 62600-2:2016 | Marine energy - Wave, tidal and other water current converters - Part 2: Design requirements for marine energy systems |
| IEC 61400-25-6:2016 | Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring |
| DIN ISO 10816-2:2010-06 | MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 2: LAND-BASED STEAM TURBINES AND GENERATORS IN EXCESS OF 50 MW WITH NORMAL OPERATING SPEEDS OF 1500 R/MIN, 1800 R/MIN, 3000 R/MIN AND 3600 R/MIN |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 13379:2003 | Condition monitoring and diagnostics of machines General guidelines on data interpretation and diagnostics techniques |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| ISO 13380:2002 | Condition monitoring and diagnostics of machines General guidelines on using performance parameters |
| ISO 14694:2003 | Industrial fans — Specifications for balance quality and vibration levels |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| VDI 3841:2002-11 | Vibration monitoring of machinery - Necessary measurements |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| ISO 10816-5:2000 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 10816-6:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 6: Reciprocating machines with power ratings above 100 kW |
| ISO 14695:2003 | Industrial fans — Method of measurement of fan vibration |
| API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| ISO 2041:2009 | Mechanical vibration, shock and condition monitoring Vocabulary |
| ISO 1925:2001 | Mechanical vibration Balancing Vocabulary |
| IEC 60034-14:2003+AMD1:2007 CSV | Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| ISO 2954:2012 | Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity |
| ISO 10817-1:1998 | Rotating shaft vibration measuring systems Part 1: Relative and absolute sensing of radial vibration |
| ISO 5348:1998 | Mechanical vibration and shock Mechanical mounting of accelerometers |
| ISO 13374-1:2003 | Condition monitoring and diagnostics of machines — Data processing, communication and presentation — Part 1: General guidelines |
| ISO 7919-3:2009 | Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines |
| ISO 17359:2011 | Condition monitoring and diagnostics of machines General guidelines |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.