ISO 19840:2012
Current
Current
The latest, up-to-date edition.
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
22-08-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 19840:2012 specifies a procedure for the verification of dry-film thickness against nominal dry-film thickness on rough surfaces, including the adjustment of the instruments used, the definition of inspection areas, sampling plans, measurement methods and acceptance/rejection criteria.
The procedure is based on the use of instruments of the permanent magnet, electromagnet and eddy current type. Instrument accuracy is verified both at zero and at a known thickness on a smooth surface and adjusted if necessary.
It does not apply to nominal dry-film thicknesses less than 40 µm.
| DevelopmentNote |
Supersedes ISO/DIS 19840. (08/2012)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 19840 : 2012 | Identical |
| NS ISO 19840 : 2004 | Identical |
| SS-ISO 19840:2012 | Identical |
| PN ISO 19840 : 2009 | Identical |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| DIN EN ISO 29601:2011-07 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| I.S. EN ISO 12944-5:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018) |
| BS EN ISO 29601:2011 | Paints and varnishes. Corrosion protection by protective paint systems. Assessment of porosity in a dry film |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| ASTM D 7091 : 2013 : REDLINE | Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals |
| I.S. EN ISO 2808:2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| BS EN ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Cross-cut testing and X-cut testing |
| BS EN ISO 2808:2007 | Paints and varnishes. Determination of film thickness |
| BS EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates. Measurement of coating thickness. Magnetic method |
| DIN EN ISO 16276-1:2007-08 | CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF, AND ACCEPTANCE CRITERIA FOR, THE ADHESION/COHESION (FRACTURE STRENGTH) OF A COATING - PART 1: PULL-OFF TESTING |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| NBR 10443 : 2008 | PAINTS AND VARNISHES - MEASUREMENT OF DRY FILM THICKNESS ON ROUGH SURFACES - TEST METHOD |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| I.S. EN ISO 29601:2011 | PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
| ISO 2063-2:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| NF ISO 20340 : 2009 | PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 12944-7:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 7: Execution and supervision of paint work (ISO 12944-7:2017) |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| I.S. EN ISO 2178:2016 | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| BS 3900-C5(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| UNE-EN ISO 29601:2011 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| 10/30202646 DC : 0 | BS ISO 29601 - PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - TEST METHODS FOR THE ASSESSMENT OF POROSITY IN A DRY FILM AND EXPRESSION OF THE RESULTS |
| I.S. EN ISO 2063-2:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| DIN EN ISO 2178:2015-01 (Draft) | NON-MAGNETIC COATINGS ON MAGNETIC SUBSTRATES - MEASUREMENT OF COATING THICKNESS - MAGNETIC METHOD (ISO 2178:2016) |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 29601:2011 | Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| 16/30278559 DC : 0 | BS ISO 18796-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF CARBON STEEL PROCESS VESSELS - PART 1: TECHNICAL REQUIREMENTS |
| BS EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries. Internal coating and lining of steel storage tanks |
| NFT 30 609-2 : 2011 | PAINTS AND VARNISHES - OPERATOR CERTIFICATION STANDARD - PART 2: LEVEL 3: WORKS FOREMEN FOR THE IMPLEMENTATION OF ANTICORROSION COATINGS FOR METALLIC STRUCTURES |
| 16/30234880 DC : 0 | BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| 14/30273520 DC : 0 | BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| ISO 12944-5:2018 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| BS EN ISO 2063-2:2017 | Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN ISO 12944-5:2016-06 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| EN ISO 2063-2:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 16961:2015 | Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks |
| BS EN ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Pull-off testing |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| ISO 29601:2011 | Paints and varnishes Corrosion protection by protective paint systems Assessment of porosity in a dry film |
| ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 2: Cross-cut testing and X-cut testing |
| ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating Part 1: Pull-off testing |
| UNE-EN ISO 2178:2017 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN ISO 2178:2016 | Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 16276-2:2007 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
| EN ISO 16276-1:2007 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing (ISO 16276-1:2007) |
| EN ISO 16961:2015 | Petroleum, petrochemical and natural gas industries - Internal coating and lining of steel storage tanks (ISO 16961:2015) |
| 16/30327443 DC : DRAFT JAN 2016 | BS EN ISO 12944-7 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE COATING SYSTEMS - PART 7: EXECUTION AND SUPERVISION OF PAINT WORK |
| I.S. EN ISO 12944-7:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 7: EXECUTION AND SUPERVISION OF PAINT WORK (ISO 12944-7:2017) |
| 01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| UNI EN ISO 29601 : 2011 | PAINTS AND VARNISHES - CORROSION PROTECTION BY PROTECTIVE PAINT SYSTEMS - ASSESSMENT OF POROSITY IN A DRY FILM |
| NFT 30 609-1 : 2011 | PAINTS AND VARNISHES - OPERATOR CERTIFICATION STANDARD - PART 1: LEVELS 1 AND 2: OPERATORS FOR THE IMPLEMENTATION OF ANTICORROSION COATINGS FOR METALLIC STRUCTURES |
| EN ISO 12944-5:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| I.S. EN ISO 16961:2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| AEP-59 : 2009 | APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE |
| BS EN ISO 12944-8:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Development of specifications for new work and maintenance |
| BS EN ISO 12944-7:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Execution and supervision of paint work |
| EN ISO 12944-8:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) |
| I.S. EN ISO 12944-8:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017) |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| DIN EN ISO 16276-2:2007-08 | Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 2: Cross-cut testing and X-cut testing (ISO 16276-2:2007) |
| ONORM EN ISO 16961 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL COATING AND LINING OF STEEL STORAGE TANKS (ISO 16961:2015) |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| AS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| ISO 8501-4:2006 | Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.