Skip to content
Please enter a keyword to search

  • ISO 2889:2010

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  30-08-2021

    Language(s):  French, English

    Published date:  03-03-2010

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 2889:2010 sets forth performance-based criteria and recommendations for the design and use of systems for sampling of airborne radioactive materials in the effluent air from the ducts and stacks of nuclear facilities.

    The requirements and recommendations of ISO 2889:2010 are aimed at sampling that is conducted for regulatory compliance and system control. If existing air-sampling systems are not designed to the performance requirements and recommendations of ISO 2889:2010, an evaluation of the performance of the system is advised. If deficiencies are discovered, a determination of whether or not a retrofit is needed and practicable is recommended.

    It can be impossible to meet the requirements of ISO 2889:2010 in all conditions with a sampling system designed for normal operations only. Under off-normal conditions, the criteria or recommendations of ISO 2889:2010 still apply; but for accident conditions, special or separate accident air sampling systems can be necessary.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 2889. (03/2010)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN ISO 16170:2017 In situ test methods for high efficiency filter systems in industrial facilities (ISO 16170:2016, Corrected version 2017-04)
    DIN 25423-2:2000-08 SAMPLING PROCEDURES FOR THE MONITORING OF RADIOACTIVITY IN AIR - PART 2: SPECIAL REQUIREMENTS FOR SAMPLING FROM AIR DUCTS AND STACKS
    15/30269207 DC : 0 BS ISO 18158 - WORKPLACE AIR - TERMINOLOGY
    06/19977467 DC : DRAFT SEP 2006
    08/30151428 DC : DRAFT JAN 2008 BS ISO 26802 - NUCLEAR FACILITIES - CRITERIA FOR THE DESIGN AND THE OPERATION OF CONTAINMENT AND VENTILATION SYSTEMS FOR NUCLEAR REACTORS
    CSA N288.5 : 2011 : R2016 EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS
    IEC 60951-2:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 2: Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
    CEI EN 60761-1 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
    DIN EN ISO 16170:2013-07 (Draft) IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016)
    BS IEC 60951-2:2009 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions Equipment for continuous off-line monitoring of radioactivity in gaseous effluents and ventilation air
    BS IEC 62705:2014 Nuclear power plants. Instrumentation and control important to safety. Radiation monitoring systems (RMS): Characteristics and lifecycle
    I.S. EN 60761-1:2004 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
    13/30249610 DC : 0 BS EN 62705 ED 1.0 - NUCLEAR POWER PLANTS - INSTRUMENTATION AND CONTROL IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEMS (RMS) CHARACTERISTICS AND TEST METHODS
    BS IEC 60761-1 : 2002 AMD 15427 EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
    BS ISO 18158:2016 Workplace air. Terminology
    14/30287118 DC : 0 BS ISO 16639 - SURVEILLANCE OF THE ACTIVITY CONCENTRATIONS OF AIRBORNE RADIOACTIVE SUBSTANCES IN THE WORKPLACE OF NUCLEAR FACILITIES
    02/713093 DC : DRAFT NOV 2002 ISO/DIS 17873 - NUCLEAR FACILITIES - CRITERIA FOR THE DESIGN AND OPERATION OF VENTILATION SYSTEMS FOR NUCLEAR INSTALLATIONS OTHER THAN NUCLEAR REACTORS
    BS IEC 60532:2010 Radiation protection instrumentation. Installed dose rate meters, warning assemblies and monitors. X and gamma radiation of energy between 50 keV and 7 MeV
    IEC 61263:1994 Radiation protection instrumentation - Portable potential alpha energy meter for rapid measurements in mines
    ISO 18158:2016 Workplace air Terminology
    BS EN ISO 14644-15:2017 Cleanrooms and associated controlled environments Assessment of suitability for use of equipment and materials by airborne chemical concentration
    NF ISO 17873 : 2006 NUCLEAR FACILITIES - CRITERIA FOR THE DESIGN AND OPERATION OF VENTILATION SYSTEMS FOR NUCLEAR INSTALLATIONS OTHER THAN NUCLEAR REACTORS
    ISO 16639:2017 Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities
    DIN EN ISO 16170:2017-05 IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016)
    KTA 1503.1 : 2016(R2017) MONITORING THE DISCHARGE OF RADIOACTIVE GASES AND AIRBORNE RADIOACTIVE PARTICULATES - PART 1: MONITORING THE DISCHARGE OF RADIOACTIVE MATTER WITH THE STACK EXHAUST AIR DURING SPECIFIED NORMAL OPERATION
    DIN EN ISO 16170 E : 2017 IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016)
    BS IEC 60768:2009 Nuclear power plants. Instrumentation important to safety. Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
    07/30172925 DC : 0 BS IEC 60951-1 - NUCLEAR POWER PLANTS - INSTRUMENTATION IMPORTANT TO SAFETY - RADIATION MONITORING SYSTEM FOR ACCIDENT AND POST ACCIDENT CONDITIONS - PART 1: GENERAL REQUIREMENTS
    BS ISO 16639:2017 Surveillance of the activity concentrations of airborne radioactive substances in the workplace of nuclear facilities
    ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities
    CSA N294 : 2009 : FR DECOMMISSIONING OF FACILITIES CONTAINING NUCLEAR SUBSTANCES
    CSA N294 : 2009 : INC : UPD 1 : 2014 DECOMMISSIONING OF FACILITIES CONTAINING NUCLEAR SUBSTANCES
    IEC 60532:2010 Radiation protection instrumentation - Installed dose rate meters, warning assemblies and monitors - X and gamma radiation of energy between 50 keV and 7 MeV
    BS EN ISO 16170:2016 In situ test methods for high efficiency filter systems in industrial facilities
    13/30248319 DC : 0 BS EN ISO 16170 - IN SITU TEST METHODS FOR VERY HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES
    BS ISO 18557:2017 Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes
    BS IEC 60951-1:2009 Nuclear power plants. Instrumentation important to safety. Radiation monitoring for accident and post-accident conditions General requirements
    IEC 62303:2008 Radiation protection instrumentation - Equipment for monitoring airborne tritium
    BS IEC 61559-1:2009 Radiation protection instrumentation in nuclear facilities. Centralized systems for continuous monitoring of radiation and/or levels of radioactivity General requirements
    CSA N294 : 2009 DECOMMISSIONING OF FACILITIES CONTAINING NUCLEAR SUBSTANCES
    16/30295652 DC : 0 BS EN ISO 14644-15 - CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 15: ASSESSMENT OF SUITABILITY FOR USE OF EQUIPMENT AND MATERIALS BY AIRBORNE CHEMICAL AND SURFACE CHEMICAL CONCENTRATION
    BS 7515:1995 Radiation protection instrumentation. Portable potential alpha energy meter for rapid measurements in mines
    I.S. EN ISO 14644-15:2017 CLEANROOMS AND ASSOCIATED CONTROLLED ENVIRONMENTS - PART 15: ASSESSMENT OF SUITABILITY FOR USE OF EQUIPMENT AND MATERIALS BY AIRBORNE CHEMICAL CONCENTRATION (ISO 14644-15:2017)
    04/30078214 DC : DRAFT AUG 2004 IEC 61577-1 - RADIATION PROTECTION INSTRUMENTATION - RADON AND RADON DECAY PRODUCT MEASURING INSTRUMENTS - PART 1: GENERAL PRINCIPLES
    CSA N294 : 2009 : R2014 DECOMMISSIONING OF FACILITIES CONTAINING NUCLEAR SUBSTANCES
    CSA N288.5 : 2011 EFFLUENT MONITORING PROGRAMS AT CLASS 1 NUCLEAR FACILITIES AND URANIUM MINES AND MILLS
    IEC 62705:2014 Nuclear power plants - Instrumentation and control important to safety - Radiation monitoring systems (RMS): Characteristics and lifecycle
    ISO 18557:2017 Characterisation principles for soils, buildings and infrastructures contaminated by radionuclides for remediation purposes
    IEC 60768:2009 Nuclear power plants - Instrumentation important to safety - Equipment for continuous in-line or on-line monitoring of radioactivity in process streams for normal and incident conditions
    IEC 61559-1:2009 Radiation protection instrumentation in nuclear facilities - Centralized systems for continuous monitoring of radiation and/or levels of radioactivity - Part 1: General requirements
    ISO 26802:2010 Nuclear facilities Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
    IEC 60761-1:2002 Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: General requirements
    EN ISO 14644-15:2017 Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO 14644-15:2017)
    ANSI N42.54 : 2018 INSTRUMENTATION AND SYSTEMS FOR MONITORING AIRBORNE RADIOACTIVITY
    17/30326674 DC : 0 BS ISO 16647 - NUCLEAR FACILITIES - CRITERIA FOR DESIGN AND OPERATION OF CONFINEMENT SYSTEMS FOR NUCLEAR WORKSITE AND FOR NUCLEAR INSTALLATIONS UNDER DECOMMISSIONING
    NFM 60 759 : 2005 NUCLEAR ENERGY - MEASUREMENT OF ENVIRONMENTAL RADIOACTIVITY - AIR - DETERMINATION OF THE VOLUMIC ACTIVITY OF IODINE IN THE ATMOSPHERIC ENVIRONMENT
    BS EN 60761-1:2004 Equipment for continuous monitoring radioactivity in gaseous effluents General requirements
    I.S. EN ISO 16170:2016 IN SITU TEST METHODS FOR HIGH EFFICIENCY FILTER SYSTEMS IN INDUSTRIAL FACILITIES (ISO 16170:2016, CORRECTED VERSION 2017-04)
    NF EN 60761-1 : 2005 EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS
    ISO 17873:2004 Nuclear facilities — Criteria for the design and operation of ventilation systems for nuclear installations other than nuclear reactors
    ISO 14644-15:2017 Cleanrooms and associated controlled environments — Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration
    IEC 60951-1:2009 Nuclear power plants - Instrumentation important to safety - Radiation monitoring for accident and post-accident conditions - Part 1: General requirements
    BS ISO 26802:2010 Nuclear facilities. Criteria for the design and the operation of containment and ventilation systems for nuclear reactors
    EN 60761-1:2004 Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements

    Standards Referencing This Book - (Show below) - (Hide below)

    DIN 25423-1:1999-12 SAMPLING PROCEDURES FOR THE MONITORING OF RADIOACTIVITY IN AIR - PART 1: GENERAL REQUIREMENTS
    ASME PTC19.1 : 2013 TEST UNCERTAINTY
    ISO 10780:1994 Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts
    ANSI N13.1 : 2011 SAMPLING AND MONITORING RELEASES OF AIRBORNE RADIOACTIVE SUBSTANCES FROM THE STACKS AND DUCTS OF NUCLEAR FACILITIES
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective