ISO 75-3:2004
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics — Determination of temperature of deflection under load — Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
Available format(s)
Hardcopy , PDF
Language(s)
English, French
Published date
12-05-2004
Withdrawn date
02-11-2025
Superseded by
€63.00
Excluding VAT
ISO 75-3:2004 specifies a method for the determination of the temperature of deflection under load of high-strength thermosetting laminates and compression-moulded long-fibre-reinforced plastics in which the fibre length is greater than 7,5 mm. The flexural stress used is not fixed, as in ISO 75-2, but is a fraction (1/1000) of the initial (room-temperature) flexural modulus of the material under test. This allows the method to be applied to materials with a wide range of flexural moduli.
| Committee |
ISO/TC 61/SC 2
|
| DevelopmentNote |
Supersedes ISO 75 (04/2001) Supersedes ISO/DIS 75-3 (05/2004)
|
| DocumentType |
Standard
|
| Pages |
5
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| NBN EN ISO 75-3 : 2004 COR 2006 | Identical |
| NEN EN ISO 75-3 : 2004 C11 2007 | Identical |
| I.S. EN ISO 75-3:2004 | Identical |
| PN EN ISO 75-3 : 2005 AC 2007 | Identical |
| BIS IS 13360-6-18 : 2013 | Identical |
| BS EN ISO 75-3:2004 | Identical |
| NF EN ISO 75-3 : 2005 | Identical |
| DIN EN ISO 75-3:2004-09 | Identical |
| ONORM EN ISO 75-3 : 2006 | Identical |
| DS EN ISO 75-3 : 2004 COR 2006 | Identical |
| UNE-EN ISO 75-3:2005 | Identical |
| NF ISO 75-3 : 1994 | Identical |
| BS 2782-1.121D(1994) : 1994 AMD 8645 | Identical |
| JIS K 7191-3:2007 | Identical |
| 11/30229997 DC : 0 | BS EN 14427 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| PREN 2719 : 200P1 | AEROSPACE SERIES - POLYCARBONATE SHEET - TECHNICAL SPECIFICATION |
| PREN 13160-7 : DRAFT 2014 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| PREN 4243 : 200P1 | AEROSPACE SERIES - CAST ACRYLIC SHEETS - TECHNICAL SPECIFICATION |
| EN ISO 9093-2:2002 | Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) |
| DIN EN 13923:2006-02 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 13160-7:2016 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| NF EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| ONORM EN 12245 : 2012 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| DEFSTAN 93-111/1(2004) : 2004 | FIBRE REINFORCED POLYMER COMPOSITE FOR BALLISTIC PROTECTION PURPOSES |
| 02/103631 DC : DRAFT MAY 2002 | BS EN 14471 - CHIMNEYS - REQUIREMENTS AND TEST METHODS FOR SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS |
| 07/30165210 DC : 0 | BS EN ISO 10350-2 - PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| BS 7825-3.1:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Thermal properties |
| 14/30301266 DC : 0 | BS EN 13160-7 - LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| PREN ISO 75-1 : DRAFT 2012 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012) |
| DIN EN ISO 10350-2:2011-06 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| DIN EN 14427:2014-09 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| BS EN ISO 4894-2:1999 | Plastics. Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials Preparation of test specimens and determination of properties |
| ISO/TS 24817:2006 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
| BS EN 13280:2001 | Specification for glass fibre reinforced cisterns of one-piece and sectional construction, for the storage, above ground, of cold water |
| DIN EN 15274:2015-06 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN 13160-7:2016 | LEAK DETECTION SYSTEMS - PART 7: REQUIREMENTS AND TEST/ASSESSMENT METHODS FOR INTERSTITIAL SPACES, LEAK DETECTION LININGS AND LEAK DETECTION JACKETS |
| I.S. EN 14427:2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| I.S. EN 15274:2015 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12245:2009 | TRANSPORTABLE GAS CYLINDERS - FULLY WRAPPED COMPOSITE CYLINDERS |
| 14/30300568 DC : 0 | BS EN 15274 - GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 17/30349214 DC : 0 | BS EN ISO 21970-1 - PLASTICS - POLYKETONE (PK) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
| 12/30238122 DC : 0 | BS EN ISO 75-1 - PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO/DIS 75-1:2012) |
| PREN 15269-20 : DRAFT 2017 | EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| ISO 24817:2017 | Petroleum, petrochemical and natural gas industries — Composite repairs for pipework — Qualification and design, installation, testing and inspection |
| DIN EN 12245:2012-03 | Transportable gas cylinders - Fully wrapped composite cylinders (includes Amendment A1:2011) |
| BS EN ISO 75-1:2013 | Plastics. Determination of temperature of deflection under load General test method |
| 12/30260914 DC : 0 | BS EN 4718 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS GLASS FIBRE BY VOLUME (PEEK-GF55) |
| BS EN ISO 10350-2:2011 | Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics |
| EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ONORM EN ISO 10350-2 : 2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| I.S. EN ISO 10350-2:2011 | PLASTICS - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA - PART 2: LONG-FIBRE-REINFORCED PLASTICS |
| ONORM EN 14427 : 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION |
| DD CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
| I.S. EN ISO 24817:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION (ISO 24817:2017, CORRECTED VERSION 2018-01-01) |
| PREN 15274 : DRAFT 2014 | GENERAL PURPOSE ADHESIVES FOR STRUCTURAL ASSEMBLY - REQUIREMENTS AND TEST METHODS |
| 14/30256269 DC : 0 | BS EN ISO 24817 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| ASTM D 5935 : 1996 | Practice for Acquisition and Presentation of Comparable Single-Point Data (Withdrawn 1998) |
| I.S. EN ISO 9093-2:2002 | SMALL CRAFT - SEACOCKS AND THROUGH-HULL FITTINGS - PART 2: NON-METALLIC |
| BS EN ISO 24817:2017 | Petroleum, petrochemical and natural gas industries. Composite repairs for pipework. Qualification and design, installation, testing and inspection |
| BS EN ISO 9093-2:2002 | Small craft. Seacocks and through-hull fittings Non-metallic |
| DIN EN ISO 75-1:2013-08 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| BS EN 13923:2005 | Filament-wound FRP pressure vessels. Materials, design, manufacturing and testing |
| BS EN 13160-7:2003 | Leak detection systems General requirements and test methods for interstitial spaces, leak protecting linings and leak protecting jackets |
| BS EN 14427:2014 | LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction |
| EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
| ISO 10350:1993 | Plastics — Acquisition and presentation of comparable single-point data |
| ONORM EN ISO 75-1 : 2013 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| I.S. EN ISO 75-1:2013 | PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 1: GENERAL TEST METHOD (ISO 75-1:2013) |
| 12/30260913 DC : 0 | BS EN 4717 - AEROSPACE SERIES - POLYETHERKETONE WITH 55% CONTINUOUS CARBON FIBRE BY VOLUME (PEEK-CF55) |
| EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| EN 13280:2001 | Specification for glass fibre reinforced cisterns of one piece and sectional construction, for the storage, above ground, of cold water |
| EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| EN 13923:2005 | Filament-wound FRP pressure vessels - Materials, design, manufacturing and testing |
| EN 12245:2009+A1:2011 | Transportable gas cylinders - Fully wrapped composite cylinders |
| DD ISO/TS 24817 : 2006 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| ABS 0063 : 2018 COR 2018 | RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS |
| BS ISO 1268-8:2004 | Fibre-reinforced plastics. Methods of producing test plates Compression moulding of SMC and BMC |
| 17/30359220 DC : 0 | BS EN 15269-20 - EXTENDED APPLICATION OF TEST RESULTS FOR FIRE RESISTANCE AND/OR SMOKE CONTROL FOR DOOR, SHUTTER AND OPENABLE WINDOW ASSEMBLIES, INCLUDING THEIR ELEMENTS OF BUILDING HARDWARE - PART 20: SMOKE CONTROL FOR DOORS, SHUTTERS AND OPENABLE WINDOWS |
| S.R. CEN ISO TS 24817:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| ISO 75-1:2013 | Plastics — Determination of temperature of deflection under load — Part 1: General test method |
| BS EN 15274:2015 | General purpose adhesives for structural assembly. Requirements and test methods |
| CEN ISO/TS 24817:2011 | Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO/TS 24817:2006) |
| UNE-EN ISO 75-1:2013 | Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) |
| UNE-EN 12245:2009 | Transportable gas cylinders - Fully wrapped composite cylinders |
| UNE-EN 15274:2015 | General purpose adhesives for structural assembly - Requirements and test methods |
| UNE-EN 13160-7:2017 | Leak detection systems - Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets |
| UNE-EN ISO 10350-2:2011 | Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2011) |
| ESPECIFICACION UNE 0059:2017 | Fiberglass reinforced polyester poles for overhead power distribution lines and telephony lines |
| UNE-EN 14427:2014 | LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction |
| BS 7008-1(1994) : AMD 8821 | ACQUISITION AND PRESENTATION OF COMPARABLE DATA FOR BASIC PROPERTIES OF PLASTICS - METHOD FOR SINGLE POINT DATA |
| ISO 75-1:2013 | Plastics — Determination of temperature of deflection under load — Part 1: General test method |
| ISO 295:2004 | Plastics — Compression moulding of test specimens of thermosetting materials |
| ISO 10350-1:2017 | Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials |
| ISO 10724-1:1998 | Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens |
| ISO 14125:1998 | Fibre-reinforced plastic composites — Determination of flexural properties |
| ISO 2818:1994 | Plastics — Preparation of test specimens by machining |
| ISO 178:2010 | Plastics — Determination of flexural properties |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.