ISO 898-6:1994
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Mechanical properties of fasteners Part 6: Nuts with specified proof load values Fine pitch thread
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
22-02-2019
Superseded by
Language(s)
English, French
Published date
15-12-1994
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Cancels and replaces the first edition (1988). Specifies the mechanical properties of nuts with specified proof load values when tested at an ambient temperature range of +10 C to +35 C. Applies to nuts with nominal thread diameters from 8 mm up to and including 39 mm, of triangular ISO thread, with diameter/pitch combinations in accordance with ISO 261, with thread tolerances 6H in accordance with ISO 965-1 and 965-2, with specific mechanical requirements, with widths across flats as specified in ISO 272, with nominal heights greater than or equal to 0,5d, made of carbon steel or alloy steel. Does not apply to nuts requiring special properties as weldability, prevailing torque performance, corrosion resistance, ability to withstand temperatures above +300 C or below -50 C.
| DevelopmentNote |
DRAFT ISO/DIS 898-6 is also available for this standard. (01/2010)
|
| DocumentType |
Standard
|
| Pages |
9
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN ISO 898-6:1996 | Identical |
| NBN EN 20898-6 : 1992 | Identical |
| NBN EN ISO 898-6 : 1997 | Identical |
| NEN ISO 898-6 : 1993 | Identical |
| NEN EN ISO 898-6 : 1995 | Identical |
| NS EN ISO 898-6 : 2ED 1995 | Identical |
| I.S. EN ISO 898-6:1996 | Identical |
| I.S. EN 20898-6:1993 | Identical |
| PN EN ISO 898-6 : 2003 | Identical |
| SAC GB/T 3098.4 : 2000 | Identical |
| SN EN ISO 898-6 : 1996 | Identical |
| UNI EN ISO 898-6 : 1996 | Identical |
| BS EN ISO 898-6:1996 | Identical |
| EN ISO 898-6:1995 | Identical |
| EN 20898-6 : 1992 | Identical |
| NF EN 20898-6 : 1992 | Identical |
| NF EN ISO 898-6 : 1996 | Identical |
| DIN EN ISO 898-6:1996-02 | Identical |
| DIN EN 20898-6:1992-10 | Corresponds |
| UNE-EN 20898-6:1993 | Identical |
| DIN EN 15865:2009-08 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| 03/319369 DC : DRAFT NOV 2003 | ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING |
| 03/316612 DC : DRAFT OCT 2003 | ISO 10597 - COMMERCIAL ROAD VEHICLES - FLAT ATTACHMENT FIXING NUTS - TEST METHODS |
| 13/30277107 DC : 0 | BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| I.S. EN 15865:2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| I.S. EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| DIN EN ISO 10484:2014-06 (Draft) | WIDENING TEST ON NUTS |
| BS EN 493:1992 | Fasteners. Surface discontinuities. Nuts |
| BS EN ISO 10484:2004 | Widening test on nuts |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BS EN 14218:2003 | Hexagon nuts with flange. Fine pitch thread |
| 13/30277104 DC : 0 | BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| PREN 16951-2 : DRAFT 2016 | RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| BS ISO 10597:2012 | Road vehicles. Flat attachment fixing nuts for commercial vehicles. Test methods |
| 04/19985115 DC : 0 | |
| PREN 14389-2 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS |
| BS ISO 10484 : 97 AMD 15307 | WIDENING TEST ON NUTS |
| BS 7597:1992 | Method of test for cone proof loading on nuts |
| BS EN 15865:2009 | Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners |
| DIN ISO 3269:1992-12 | FASTENERS - ACCEPTANCE INSPECTION |
| 16/30336501 DC : 0 | BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| I.S. EN ISO 10485:2004 | CONE PROOF LOAD TEST ON NUTS |
| DIN EN ISO 10484:2004-10 | Widening test on nuts (ISO 10484:1997) |
| PREN 14389-1 : DRAFT 2013 | ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS |
| I.S. EN 493:1993 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| BIS IS 1367-8 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 8: PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES |
| UNI EN 15865 : 2009 | ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS |
| UNI EN ISO 16047 : 2012 | FASTENERS - TORQUE/CLAMP FORCE TESTING |
| DIN EN ISO 6157-2:2004-10 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| BS EN ISO 10485:2004 | Cone proof load test on nuts |
| BS EN ISO 3269:2001 | Fasteners. Acceptance inspection |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| ISO 10485:1991 | Cone proof load test on nuts |
| BS EN ISO 6157-2:2004 | Fasteners. Surface discontinuities Nuts |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| EN ISO 10484:2004 | Widening test on nuts (ISO 10484:1997) |
| EN 14218:2003 | Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified) |
| EN ISO 6157-2:2004 | Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) |
| EN ISO 10485:2004 | Cone proof load test on nuts (ISO 10485:1991) |
| EN 493 : 1992 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| EN 15865:2009 | Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified) |
| I.S. EN ISO 6157-2:2004 | FASTENERS - SURFACE DISCONTINUITIES - PART 2: NUTS |
| I.S. EN ISO 10484:2004 | WIDENING TEST ON NUTS |
| 08/30193145 DC : 0 | BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 02/707699 DC : DRAFT JUN 2002 | ISO/DIS 21670 - HEXAGON WELD NUTS WITH FLANGE |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| ISO 10597:2012 | Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods |
| ISO 10484:1997 | Widening test on nuts |
| DIN EN 14218:2003-09 | HEXAGON NUTS WITH FLANGE - FINE PITCH THREAD |
| DIN EN 493:1992-07 | FASTENERS - SURFACE DISCONTINUITIES - NUTS |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| ISO 965-2:1998 | ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ISO 68:1973 | ISO general purpose screw threads Basic profile |
| ISO 6506:1981 | Metallic materials — Hardness test — Brinell test |
| ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 4964:1984 | Steel Hardness conversions |
| ISO 286-2:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| ISO 6157-2:1995 | Fasteners Surface discontinuities Part 2: Nuts |
| ISO 965-1:2013 | ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.