ISO 9223:2012
Current
Current
The latest, up-to-date edition.
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
27-01-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 9223:2012 establishes a classification system for the corrosivity of atmospheric environments. It
- defines corrosivity categories for the atmospheric environments by the first-year corrosion rate of standard specimens,
- gives dose-response functions for normative estimation of the corrosivity category based on the calculated first-year corrosion loss of standard metals, and
- makes possible an informative estimation of the corrosivity category based on knowledge of the local environmental situation.
ISO 9223:2012 specifies the key factors in the atmospheric corrosion of metals and alloys. These are the temperature-humidity complex, pollution by sulfur dioxide and airborne salinity.
The temperature-humidity complex can be evaluated in terms of time of wetness. Corrosion effects of other pollutants (ozone, nitrogen oxides, particulates) are not considered decisive in the assessment of corrosivity according to ISO 9223:2012.
ISO 9223:2012 does not characterize the corrosivity of specific service atmospheres, e.g. atmospheres in chemical or metallurgical industries.
| DevelopmentNote |
Supersedes ISO/DIS 9223. (01/2012)
|
| DocumentType |
Standard
|
| Pages |
15
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 9223 : 2012 | Identical |
| NBN EN ISO 9223 : 2012 | Identical |
| NEN EN ISO 9223 : 2012 | Identical |
| NS EN ISO 9223 : 2012 | Identical |
| I.S. EN ISO 9223:2012 | Identical |
| PN EN ISO 9223 : 2012 | Identical |
| SN EN ISO 9223:2012 | Identical |
| UNI EN ISO 9223 : 2012 | Identical |
| SS-EN ISO 9223:2012 | Identical |
| BS EN ISO 9223:2012 | Identical |
| EN ISO 9223:2012 | Identical |
| DIN EN ISO 9223:2012-05 | Identical |
| IS 14191 : 2024 | Identical |
| NEN ISO 9223 : 1997 | Identical |
| PNE-FprEN ISO 9223 | Identical |
| UNE-EN ISO 9223:2012 | Identical |
| NF ISO 9223 : 2002 | Identical |
| 09/30172555 DC : 0 | BS ISO 15686-1 REV - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 1: GENERAL PRINCIPLES AND FRAMEWORK |
| UNE-EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| 14/30256684 DC : 0 | BS EN ISO 17668 - ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION |
| BS ISO 11844-1 : 2006 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| ISO 15686-7:2017 | Buildings and constructed assets — Service life planning — Part 7: Performance evaluation for feedback of service life data from practice |
| BS EN ISO 9224 : 0 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - GUIDING VALUES FOR THE CORROSIVITY CATEGORIES |
| 12/30273548 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| NF EN ISO 9225 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - MEASUREMENT OF ENVIRONMENTAL PARAMETERS AFFECTING CORROSIVITY OF ATMOSPHERES |
| ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| BS ISO 17746:2016 | Steel wire rope net panels and rolls. Definitions and specifications |
| 08/30194268 DC : 0 | BS EN 61439-5 - LOW-VOLTAGE SWITCHGEAR AND CONTROL GEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| 08/30175210 DC : DRAFT APR 2008 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED AND SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| BS ISO 15686-1:2011 | Buildings and constructed assets. Service life planning General principles and framework |
| DEFSTAN 03-30/3(2005) : 2005 | TREATMENTS FOR THE PROTECTION FOR METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION |
| UNI EN ISO 11303 : 2008 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| I.S. EN 10169:2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| UNI EN 15773 : 2009 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES (DUPLEX SYSTEMS) - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| I.S. EN ISO 9226:2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY (ISO 9226:2012) |
| ISO 16539:2013 | Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| EN 15773:2018 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
| UNI EN ISO 9225 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - MEASUREMENT OF ENVIRONMENTAL PARAMETERS AFFECTING CORROSIVITY OF ATMOSPHERES |
| DEFSTAN 03-30/2(2000) : 2000 | TREATMENTS FOR THE PROTECTION FOR METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION |
| I.S. EN 15773:2018 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| ISO 9225:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
| UNE-EN ISO 8565:2012 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| EN 10223-8:2013 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| EN 10223-3:2013 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN ISO 9224:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) |
| EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications |
| EN ISO 9225:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) |
| EN ISO 9226:2012 | Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) |
| EN 10169:2010+A1:2012 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| NACE SP 01 87 : 2017 | DESIGN FOR CORROSION CONTROL OF REINFORCING STEEL IN CONCRETE |
| BS EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories Environmental testing |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| 16/30277023 DC : 0 | BS ISO 15686-7 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 7: PERFORMANCE EVALUATION FOR FEEDBACK OF SERVICE LIFE DATA FROM PRACTICE |
| BS EN ISO 11303:2008 | Corrosion of metals and alloys. Guidelines for selection of protection methods against atmospheric corrosion |
| UNE-EN 61439-5:2015 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
| BS EN ISO 9226:2012 | Corrosion of metals and alloys. Corrosivity of atmospheres. Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| BS EN ISO 11844-1:2008 | Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres Determination and estimation of indoor corrosivity |
| 16/30323507 DC : 0 | BS EN 15773 - INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| BS EN 10223-8:2013 | Steel wire and wire products for fencing and netting Welded mesh gabion products |
| 10/30205800 DC : 0 | BS ISO 15686-2 - BUILDINGS AND CONSTRUCTED ASSETS - SERVICE LIFE PLANNING - PART 2: SERVICE LIFE PREDICTION PROCEDURES |
| ISO 27830:2017 | Metallic and other inorganic coatings — Requirements for the designation of metallic and inorganic coatings |
| BS ISO 10840:2008 | Plastics. Guidance for the use of standard fire tests |
| PREN ISO 16701 : DRAFT 2011 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO/DIS 16701:2011) |
| UNI EN ISO 11844-2 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| I.S. EN ISO 11844-2:2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| BS ISO 15686-7:2017 | Buildings and constructed assets. Service life planning Performance evaluation for feedback of service life data from practice |
| BS ISO 15686-8:2008 | Buildings and constructed assets. Service-life planning Reference service life and service-life estimation |
| BS EN 60439-5:2006 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for power distribution in public networks |
| ISO 10840:2008 | Plastics — Guidance for the use of standard fire tests |
| I.S. EN ISO 9225:2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - MEASUREMENT OF ENVIRONMENTAL PARAMETERS AFFECTING CORROSIVITY OF ATMOSPHERES (ISO 9225:2012) |
| I.S. EN 10223-8:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| BS EN 10169 : 2010 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| ISO 15686-8:2008 | Buildings and constructed assets — Service-life planning — Part 8: Reference service life and service-life estimation |
| I.S. EN 61439-5:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| ISO/TR 16335:2013 | Corrosion of metals and alloys Corrosion tests in artificial atmospheres Guidelines for selection of accelerated corrosion test for product qualification |
| 16/30341165 DC : 0 | BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| IEC TS 60079-43:2017 | Explosive atmospheres - Part 43: Equipment in adverse service conditions |
| I.S. EN 14492-2:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN ISO 7441:2015-04 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| ISO 2810:2004 | Paints and varnishes Natural weathering of coatings Exposure and assessment |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| I.S. EN ISO 8565:2011 | METALS AND ALLOYS - ATMOSPHERIC CORROSION TESTING - GENERAL REQUIREMENTS |
| I.S. EN 10223-3:2013 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| I.S. EN 14492-1:2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| DIN EN 14492-1:2010-06 | Cranes - Power driven winches and hoists - Part 1: Power driven winches (includes Amendment A1:2009) |
| I.S. EN ISO 7441:2015 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF BIMETALLIC CORROSION IN ATMOSPHERIC EXPOSURE CORROSION TESTS (ISO 7441:2015) |
| DIN EN 10169-2:2006-07 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN ISO 11303:2008-08 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
| I.S. EN ISO 1461:2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| NF EN ISO 9224 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - GUIDING VALUES FOR THE CORROSIVITY CATEGORIES |
| DIN EN 10169:2012-06 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions (includes Amendment A1:2012) |
| I.S. EN 12500:2000 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN ATMOSPHERIC ENVIRONMENT - CLASSIFICATION, DETERMINATION AND ESTIMATION OF CORROSIVITY OF ATMOSPHERIC ENVIRONMENTS |
| BS ISO 15686-2:2012 | Buildings and constructed assets. Service life planning Service life prediction procedures |
| DIN EN ISO 11844-1:2008-08 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| UNI EN ISO 11844-1 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| PREN 14492-1 : DRAFT 2015 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UFC 1-300-02 : CHANGE 1 | UNIFIED FACILITIES CRITERIA - UNIFIED FACILITIES GUIDE SPECIFICATIONS (UFGS) FORMAT STANDARD |
| PD ISO/TS 16688:2017 | Guidelines for the selection of coating types, tests and methods of assessing the performance of coated aluminium in architectural applications |
| DIN EN ISO 11844-2:2008-08 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| 14/30259005 DC : 0 | BS ISO 17746 - STEEL WIRE ROPE NET PANELS AND ROLLS - DEFINITIONS AND SPECIFICATIONS |
| UNI EN ISO 9224 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - GUIDING VALUES FOR THE CORROSIVITY CATEGORIES |
| DIN EN ISO 17668:2016-06 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| BS ISO 11844-2 : 2005 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| BS ISO 16701 : 2003 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| BS EN ISO 9225:2012 | Corrosion of metals and alloys. Corrosivity of atmospheres. Measurement of environmental parameters affecting corrosivity of atmospheres |
| UNI 11211-4 : 2012 | ROCKFALL PROTECTIVE MEASURES - PART 4: DEFINITIVE AND EXECUTIVE DESIGN |
| DIN EN ISO 9224:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Guiding values for the corrosivity categories (ISO 9224:2012) |
| UNI EN ISO 9226 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY |
| I.S. EN ISO 11844-1:2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| I.S. EN ISO 17668:2016 | ZINC DIFFUSION COATINGS ON FERROUS PRODUCTS - SHERARDIZING - SPECIFICATION (ISO 17668:2016) |
| ISO 13823:2008 | General principles on the design of structures for durability |
| I.S. EN 50483-6:2009 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| I.S. EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| EN ISO 12944-3:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations (ISO 12944-3:2017) |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| UNE-EN 15773:2010 | Industrial application of powder organic coatings to hot dip galvanized or sherardized steel articles [duplex systems] - Specifications, recommendations and guidelines |
| I.S. EN ISO 16701:2015 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| ISO 17745:2016 | Steel wire ring net panels Definitions and specifications |
| I.S. EN 50300:2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| BS EN ISO 2810:2004 | Paints and varnishes. Natural weathering of coatings. Exposure and assessment |
| IEC 60439-5:2006 | Low-voltage switchgear and controlgear assemblies - Part 5: Particular requirements for assemblies for power distribution in public networks |
| ISO 16701:2015 | Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| ISO 17668:2016 | Zinc diffusion coatings on ferrous products Sherardizing Specification |
| UNE-EN 10223-3:2014 | Steel wire and wire products for fencing and netting - Part 3: Hexagonal steel wire mesh products for civil engineering purposes |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN ISO 11844-2:2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005) |
| ONORM EN ISO 11844-1 : 2008 | CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 1: DETERMINATION AND ESTIMATION OF INDOOR CORROSIVITY |
| I.S. EN ISO 2810:2004 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| EN ISO 11844-1:2008 | Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 1: Determination and estimation of indoor corrosivity (ISO 11844-1:2006) |
| EN ISO 2810:2004 | Paints and varnishes - Natural weathering of coatings - Exposure and assessment (ISO 2810:2004) |
| EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| UNI EN 10223-8 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| UNI EN 14492-2 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| UNI EN ISO 1461 : 2009 | HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| UNI EN 14492-1 : 2009 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| UNI EN 10223-3 : 2014 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| UNI EN ISO 8565 : 2011 | METALS AND ALLOYS - ATMOSPHERIC CORROSION TESTING - GENERAL REQUIREMENTS |
| PD ISO/TR 16335:2013 | Corrosion of metals and alloys. Corrosion tests in artificial atmospheres. Guidelines for selection of accelerated corrosion test for product qualification |
| 07/30174185 DC : 0 | BS EN ISO 1461 - HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
| ISO 17746:2016 | Steel wire rope net panels and rolls Definitions and specifications |
| BS EN 50300:2004 | Low-voltage switchgear and controlgear assemblies. General requirements for low-voltage substation cable distribution boards |
| BS ISO 16539:2013 | Corrosion of metals and alloys. Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process. \'Dry\' and \'wet\' conditions at constant absolute humidity |
| BS EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products. Sherardizing. Specification |
| 04/30125747 DC : DRAFT NOV 2004 | IEC 60439-5 ED.2 - LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| BS ISO 11303 : 2002 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| 01/715982 DC : DRAFT NOV 2001 | ISO/CD 11844-2 - CORROSION OF METALS AND ALLOYS - CLASSIFICATION OF LOW CORROSIVITY OF INDOOR ATMOSPHERES - PART 2: DETERMINATION OF CORROSION ATTACK IN INDOOR ATMOSPHERES |
| BS EN ISO 14713-1:2017 | Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures General principles of design and corrosion resistance |
| NF EN ISO 9226 : 2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - DETERMINATION OF CORROSION RATE OF STANDARD SPECIMENS FOR THE EVALUATION OF CORROSIVITY |
| BS EN 61439-5:2015 | Low-voltage switchgear and controlgear assemblies Assemblies for power distribution in public networks |
| DIN EN ISO 14713-1:2010-05 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| 11/30231401 DC : 0 | BS EN ISO 16701 - CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION |
| PREN 14592 : DRAFT 2017 | TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS |
| DIN EN 10223-8:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 8: WELDED MESH GABION PRODUCTS |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| I.S. EN ISO 27830:2017 | METALLIC AND OTHER INORGANIC COATINGS - REQUIREMENTS FOR THE DESIGNATION OF METALLIC AND INORGANIC COATINGS (ISO 27830:2017) |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| BS EN ISO 12944-3:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Design considerations |
| EN ISO 12944-2:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:2017) |
| EN ISO 27830:2017 | Metallic and other inorganic coatings - Requirements for the designation of metallic and inorganic coatings (ISO 27830:2017) |
| I.S. EN ISO 12944-2:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS (ISO 12944-2:2017) |
| I.S. EN ISO 12944-3:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
| I.S. EN ISO 11303:2008 | CORROSION OF METALS AND ALLOYS - GUIDELINES FOR SELECTION OF PROTECTION METHODS AGAINST ATMOSPHERIC CORROSION |
| IEC 61892-1:2015 | Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions |
| DIN EN ISO 1461:2009-10 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| DIN EN 10223-3:2014-04 | STEEL WIRE AND WIRE PRODUCTS FOR FENCING AND NETTING - PART 3: HEXAGONAL STEEL WIRE MESH PRODUCTS FOR CIVIL ENGINEERING PURPOSES |
| DIN EN ISO 2810:2004-10 | PAINTS AND VARNISHES - NATURAL WEATHERING OF COATINGS - EXPOSURE AND ASSESSMENT |
| BS EN 10169-2:2006 | Continuously organic coated (coil coated) steel flat products Products for building exterior applications |
| UNE-EN 10223-8:2014 | Steel wire and wire products for fencing and netting - Part 8: Welded mesh gabion products |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| 14/30293263 DC : 0 | BS IEC 61892-1 ED 3.0 - MOBILE AND FIXED OFFSHORE UNITS - ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS AND CONDITIONS |
| ISO 9224:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| IEC 61439-5:2014 | Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks |
| BS EN 14492-1 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 1: POWER DRIVEN WINCHES |
| BS EN ISO 7441:2015 | Corrosion of metals and alloys. Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| ISO 8565:2011 | Metals and alloys Atmospheric corrosion testing General requirements |
| BS EN ISO 8565:2011 | Metals and alloys. Atmospheric corrosion testing. General requirements |
| ISO 11844-1:2006 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 1: Determination and estimation of indoor corrosivity |
| ISO 11844-2:2005 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 2: Determination of corrosion attack in indoor atmospheres |
| ISO 7441:2015 | Corrosion of metals and alloys Determination of bimetallic corrosion in atmospheric exposure corrosion tests |
| BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
| ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| UNE-EN 10169:2011 | Continuously organic coated (coil coated) steel flat products - Technical delivery conditions |
| EN ISO 8565:2011 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| EN ISO 17668:2016 | Zinc diffusion coatings on ferrous products - Sherardizing - Specification (ISO 17668:2016) |
| EN ISO 11303:2008 | Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) |
| EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| EN ISO 14713 : 1999 | PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - ZINC AND ALUMINIUM COATINGS - GUIDELINES |
| EN ISO 16701:2015 | Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (ISO 16701:2015, Corrected version 2018-10) |
| I.S. EN 10169-2:2006 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - PART 2: PRODUCTS FOR BUILDING EXTERIOR APPLICATIONS |
| DIN EN ISO 9226:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Determination of corrosion rate of standard specimens for the evaluation of corrosivity (ISO 9226:2012) |
| BS EN 1993-2 NA : 2008 | UK NATIONAL ANNEX TO EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 2: STEEL BRIDGES |
| PREN 15773 : DRAFT 2016 | INDUSTRIAL APPLICATION OF POWDER ORGANIC COATINGS TO HOT DIP GALVANIZED OR SHERARDIZED STEEL ARTICLES [DUPLEX SYSTEMS] - SPECIFICATIONS, RECOMMENDATIONS AND GUIDELINES |
| DIN EN ISO 9225:2012-05 | Corrosion of metals and alloys - Corrosivity of atmospheres - Measurement of environmental parameters affecting corrosivity of atmospheres (ISO 9225:2012) |
| 08/30188146 DC : 0 | BS EN 10169 - CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS ISO 17745:2016 | Steel wire ring net panels. Definitions and specifications |
| DIN EN ISO 16701:2015-10 | CORROSION OF METALS AND ALLOYS - CORROSION IN ARTIFICIAL ATMOSPHERE - ACCELERATED CORROSION TEST INVOLVING EXPOSURE UNDER CONTROLLED CONDITIONS OF HUMIDITY CYCLING AND INTERMITTENT SPRAYING OF A SALT SOLUTION (ISO 16701:2015) |
| BS EN ISO 16701:2015 | Corrosion of metals and alloys. Corrosion in artificial atmosphere. Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution |
| I.S. EN ISO 14713-1:2017 | ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 1: GENERAL PRINCIPLES OF DESIGN AND CORROSION RESISTANCE (ISO 14713-1:2017) |
| BS EN ISO 11844-2:2008 | Corrosion of metals and alloys. Classification of low corrosivity of indoor atmospheres Determination of corrosion attack in indoor atmospheres |
| NF EN 50300 : 2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS FOR LOW-VOLTAGE SUBSTATION CABLE DISTRIBUTION BOARDS |
| PD IEC/TS 60079-43:2017 | Explosive atmospheres Equipment in adverse service conditions |
| UNE-EN ISO 14713-1:2017 | Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) |
| 16/30327437 DC : 0 | BS EN ISO 12944-2 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE COATING SYSTEMS - PART 2: CLASSIFICATION OF ENVIRONMENTS |
| SAE J1976_201204 | Outdoor Weathering of Exterior Materials |
| CEI EN 50483-6 : 2011 | TEST REQUIREMENTS FOR LOW VOLTAGE AERIAL BUNDLED CABLE ACCESSORIES - PART 6: ENVIRONMENTAL TESTING |
| ISO 15686-1:2011 | Buildings and constructed assets — Service life planning — Part 1: General principles and framework |
| BS IEC 61892-1:2015 | Mobile and fixed offshore units. Electrical installations General requirements and conditions |
| I.S. EN ISO 9224:2012 | CORROSION OF METALS AND ALLOYS - CORROSIVITY OF ATMOSPHERES - GUIDING VALUES FOR THE CORROSIVITY CATEGORIES (ISO 9224:2012) |
| UNI EN 10169 : 2012 | CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
| BS EN ISO 27830:2017 | Metallic and other inorganic coatings. Requirements for the designation of metallic and inorganic coatings |
| ASTM A 1003/A1003M : 2015 : REDLINE | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| DIN EN 14492-2:2016-08 (Draft) | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-1:2015-05 (Draft) | Cranes - Power driven winches & hoists - part 1 power driven winches; German and English version prEN 14492-1:2015 |
| BS EN 10223-3:2013 | Steel wire and wire products for fencing and netting Hexagonal steel wire mesh products for civil engineering purposes |
| ISO 11303:2002 | Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion |
| ISO 14713:1999 | Protection against corrosion of iron and steel in structures Zinc and aluminium coatings Guidelines |
| UNE-EN ISO 7441:2015 | Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) |
| BS EN 12500:2000 | Protection of metallic materials against corrosion. Corrosion likelihood in atmospheric environment. Classification, determination and estimation of corrosivity of atmospheric environments |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| BS EN ISO 14713:1999 | Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines |
| BS EN 14492-2 : 2006 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| DIN EN 14492-2:2010-05 | CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS |
| EN 60439-5:2006 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS |
| EN 61439-5:2015/AC:2015 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014) |
| EN 12500:2000 | Protection of metallic materials against corrosion - Corrosion likelihood in atmospheric environment - Classification, determination and estimation of corrosivity of atmospheric environments |
| DIN EN ISO 8565:2011-09 | Metals and alloys - Atmospheric corrosion testing - General requirements (ISO 8565:2011) |
| EN 50483-6:2009 | Test requirements for low voltage aerial bundled cable accessories - Part 6: Environmental testing |
| EN 50300:2004 | Low-voltage switchgear and controlgear assemblies - General requirements for low-voltage substation cable distribution boards |
| DIN EN 61439-5 : 2015-10 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014 + COR.:2015) |
| VDE 0660-600-5 : 2015-10 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 5: ASSEMBLIES FOR POWER DISTRIBUTION IN PUBLIC NETWORKS (IEC 61439-5:2014 + COR.:2015) |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| AS 2699.2:2020 | Built-in components for masonry construction Connectors and accessories |
| ISO 11844-2:2005 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 2: Determination of corrosion attack in indoor atmospheres |
| ISO 11303:2002 | Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion |
| ISO 9226:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity |
| ISO 9224:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories |
| AS 4312:2019 | Atmospheric corrosivity zones in Australia |
| ISO 9225:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres |
| AS 3700:2018 Sup 1:2020 | Masonry structures - Commentary (Supplement 1 to AS 3700:2018) |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| AS 2699.3:2020 | Built-in components for masonry construction Lintels and shelf angles (durability requirements) |
| ISO 11844-1:2006 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 1: Determination and estimation of indoor corrosivity |
| ISO 11844-3:2006 | Corrosion of metals and alloys Classification of low corrosivity of indoor atmospheres Part 3: Measurement of environmental parameters affecting indoor corrosivity |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.