MIL-DTL-24607 Revision B:2008
Current
The latest, up-to-date edition.
Enamel, Interior, Nonflaming (Dry), Chlorinated Alkyd Resin
23-10-2008
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
APPENDIX A - RESISTANCE TO IGNITION
Specifies enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 lb/gal) as delivered.
| DevelopmentNote |
Supersedes DOD E 24607 (A). (11/2008)
|
| DocumentType |
Standard
|
| Pages |
81
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers enamel that has been formulated to comply with air pollution regulations which allow a maximum volatile organic compound (VOC) content of 250 grams of solvent minus water per liter of paint (2.08 pounds of solvent minus water per gallon of paint) as delivered. This specification covers chlorinated alkyd resin interior enamels that do not support combustion or flaming when dry and are for use on primed, smooth metal, glass reinforced plastic (GRP), wood, and plastic/composite surfaces. This product is supplied in a single can and is used as supplied without thinning.
| MIL-PRF-24712 Revision B:2014 | Coatings, Powder, Thermosetting |
| MIL-DTL-32585 Base Document:2017 | Insulation, Thermal and Acoustic, Fibrous Glass |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| MIL-PRF-32161 Base Document:2004 | Insulation, High Temperature Fire Protection, Thermal and Acoustic |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL-PRF-24596 Revision B:2009 | Coating Compounds, Nonflaming, Fire-Resistant |
| MIL-DTL-24688 Revision A:2011 | Insulation, Thermal and Acoustic Absorptive, Cellular Polyimide Foam |
| MIL-DTL-24441-20 Revision B:2009 | Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type III |
| MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
| CFR 40(PTS81-85) : JUL 2012 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| CFR 40(PTS300-399) : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| MIL-DTL-24441-29 Revision B:2009 | Paint, Epoxy-Polyamide, Green Primer, Formula 150, Type IV |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| CFR 40(PT60) APPENDIX : JUL 2017 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 5895 : 2013 : REDLINE | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| CFR 29(PTS1911-1925) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ASTM D 2244 : 2016 : REDLINE | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| CFR 40(PTS260-299) : JUL 96 | PROTECTION OF ENVIRONMENT - ENVIRONMENTAL PROTECTION AGENCY |
| ASTM D 562 : 2010 | Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer |
| CFR 29(PTS1911-1919) : 1984 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| CFR 29(PT1926) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION |
| TT-P-645 Revision C:2013 | Paint, Alkyd Type, Formula Number 84 |
| FED-STD-141 Revision D:2001 | Paint, Varnish, Lacquer and Related Materials: Methods of Inspection, Sampling and Testing |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ASTM E 162 : 2016 : REDLINE | Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| CFR 29(PTS1927-END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.