• Shopping Cart
    There are no items in your cart

NFPA 654 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS

Available format(s)

Hardcopy

Superseded date

03-09-2019

Superseded by

NFPA 654 : 2020

Language(s)

English

Published date

01-01-2017

€69.99
Excluding VAT

Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General Requirements
Chapter 5 - Performance-Based Design Option
Chapter 6 - Facility and Systems Design
Chapter 7 - Process Equipment
Chapter 8 - Fugitive Dust Control and Housekeeping
Chapter 9 - Ignition Sources
Chapter 10 - Fire Protection
Chapter 11 - Training and Procedures
Chapter 12 - Inspection and Maintenance
Annex A - Explanatory Material
Annex B - Explosion Protection
Annex C - Informational Primer on Spark Detection
          and Extinguishing Systems
Annex D - Dust Layer Characterization and Precautions
Annex E - Deflagration Propagation Isolation Methods
Annex F - Use of Water as Extinguishing Agent for
          Combustible Particulate Solids
Annex G - Informational References
Index

Gives requirements for all phases of the manufacturing, processing, blending, conveying, repackaging, and handling of combustible particulate solids or hybrid mixtures, regardless of concentration or particle size, where the materials present a fire, a flash fire, or an explosion hazard.

DevelopmentNote
2006 Edition is also available in Spanish Language, See NFPA 654 SPANISH. (05/2011) Also available with NFPA GUIDE TO COMBUSTIBLE DUST, see NFPA 654 SET. (02/2012) Supersedes & incorporates NFPA 650. (02/2015)
DocumentType
Standard
Pages
72
PublisherName
National Fire Protection Association
Status
Superseded
SupersededBy
Supersedes

NFPA 61 : 2017 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
NFPA 68 : 2018 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
NFPA 33 : 2018 SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS
NFPA 35 : 2016 MANUFACTURE OF ORGANIC COATINGS
NFPA 34 : 2018 DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
NFPA 850 : 2015 FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
NFPA 704 : 2017 STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE
A-A-56017 Base Document:1990 CELLULOSE ACETATE
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
NFPA 56 (PS) : 2012 FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS
NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
NFPA 2 : 2016 HYDROGEN TECHNOLOGIES CODE
NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
NFPA 820 : 2016 FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 INTERNATIONAL BUILDING CODE
NFPA 1 : 2021 FIRE CODE
C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
UFC 3-410-04N : 2004 UNIFIED FACILITIES CRITERIA - INDUSTRIAL VENTILATION
ASTM D 3214 : 1996 Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation (Withdrawn 2002)
ISA 12.10 : 1988 AREA CLASSIFICATION IN HAZARDOUS (CLASSIFIED) DUST LOCATIONS
NFPA 1620 : 2015 PRE-INCIDENT PLANNING
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
NFPA 61 : 2020 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
ICC IBC CODE AND COMMENTARY VOLUME 2 : 2015 IBC® Code and Commentary, Volume 2
ICC 2012 INTERNATIONAL FIRE CODE : 2012 INTERNATIONAL FIRE CODE
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 IFC® Code and Commentary
BS 5908-1:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Code of practice for precautions against fire and explosion in chemical plants, chemical storage and similar premises
CAN/CSA-Z767-17 Process safety management
AIHA Z9.4 : 2011 ABRASIVE-BLASTING OPERATIONS - VENTILATION AND SAFE PRACTICES FOR FIXED LOCATION ENCLOSURES
NFPA 499 : 2017 CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
NFPA 484 : 2015 COMBUSTIBLE METALS
NFPA 497B : 1991 RECOMMENDED PRACTICE FOR THE CLASSIFICATION OF CLASS II HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
NFPA 655 : 2017 PREVENTION OF SULFUR FIRES AND EXPLOSIONS
NFPA 1 : 2018 FIRE CODE
NFPA 400 : 2019 Hazardous Materials Code

NFPA 484 : 2015 COMBUSTIBLE METALS
NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
NFPA 652 : 2016 FUNDAMENTALS OF COMBUSTIBLE DUST
AMCA 99 : 2016 STANDARDS HANDBOOK
NFPA 495 : 2013 EXPLOSIVE MATERIALS CODE
NFPA 2001 : 2015 CLEAN AGENT FIRE EXTINGUISHING SYSTEMS
NFPA 750 : 2015 WATER MIST FIRE PROTECTION SYSTEMS
ASTM E 1491 : 2006 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
NFPA 921 : 2017 GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS
NFPA 25 : 2017 INSPECTION, TESTING, AND MAINTENANCE OF WATER-BASED FIRE PROTECTION SYSTEMS
NFPA 61 : 2017 PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES
NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
NFPA 1250 : 2015 FIRE AND EMERGENCY SERVICES ORGANIZATION RISK MANAGEMENT
VDI 3673:1979-06 Pressure release of dust explosions
CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
IEC 61340-4-4:2012+AMD1:2014 CSV Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediatebulk containers (FIBC)
NFPA 505 : 2013 FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS
NFPA 101 : 2018 LIFE SAFETY CODE
ISA 84.00.01-1 : 2004 FUNCTIONAL SAFETY: SAFETY INSTRUMENTED SYSTEMS FOR THE PROCESS INDUSTRY SECTOR - PART 1: FRAMEWORK, DEFINITIONS, SYSTEM, HARDWARE AND SOFTWARE REQUIREMENTS
NFPA 400 : 2016 HAZARDOUS MATERIALS CODE
NFPA 221 : 2018 HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS
NEMA 250 : 2014 ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
ASME B31.3:2016 PROCESS PIPING
NFPA 5000 : 2018 BUILDING CONSTRUCTION AND SAFETY CODE
NFPA 17 : 2017 DRY CHEMICAL EXTINGUISHING SYSTEMS
NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
NFPA 2113 : 2012 SELECTION, CARE, USE, AND MAINTENANCE OF FLAME-RESISTANT GARMENTS FOR PROTECTION OF INDUSTRIAL PERSONNEL AGAINST SHORT-DURATION THERMAL EXPOSURES FROM FIRE
NFPA 33 : 2016 SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS
ASTM E 1515 : 2014 : REDLINE Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
NFPA 1451 : 2013 FIRE AND EMERGENCY SERVICE VEHICLE OPERATIONS TRAINING PROGRAM
NFPA 15 : 2017 WATER SPRAY FIXED SYSTEMS FOR FIRE PROTECTION
NFPA 664 : 2017 PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES
NFPA SFPE PERFORMANCE BASED FIRE PROT : 2006 SFPE ENGINEERING GUIDE TO PERFORMANCE-BASED FIRE PROTECTION
NFPA 10 : 2018 PORTABLE FIRE EXTINGUISHERS
ISO 6184-1:1985 Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air
NFPA 68 : 2013 EXPLOSION PROTECTION BY DEFLAGRATION VENTING
NFPA 14 : 2016 INSTALLATION OF STANDPIPE AND HOSE SYSTEMS
ASTM E 2021 : 2015 : REDLINE Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
ASTM E 136 : 2016-02 TEST METHOD FOR BEHAVIOUR OF MATERIALS IN A VERTICAL TUBE FURNACE AT 750 DEGREES C
NFPA 86 : 2015 OVENS AND FURNACES
NFPA 220 : 2018 TYPES OF BUILDING CONSTRUCTION
NFPA 30B : 2015 CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS
NFPA 51B : 2014 FIRE PREVENTION DURING WELDING, CUTTING, AND OTHER HOT WORK
NFPA 1125 : 2017 MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS
NFPA 11 : 2016 LOW-, MEDIUM-, AND HIGH-EXPANSION FOAM
NFPA 85 : 2015 BOILER AND COMBUSTION SYSTEMS HAZARDS CODE
NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
NFPA 12 : 2015 CARBON DIOXIDE EXTINGUISHING SYSTEMS
ISO 6184-4:1985 Explosion protection systems Part 4: Determination of efficacy of explosion suppression systems
NFPA 499 : 2017 CLASSIFICATION OF COMBUSTIBLE DUSTS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
NFPA 72 : 2016 NATIONAL FIRE ALARM AND SIGNALING CODE
NFPA 13 : 2016 INSTALLATION OF SPRINKLER SYSTEMS
CFR 30(PTS1-199) : JUL 2017 MINERAL RESOURCES - MINE SAFETY & HEALTH ADMINISTRATION, DEPARTMENT OF LABOUR
NFPA 77 : 2014 STATIC ELECTRICITY
NFPA 16 : 2015 INSTALLATION OF FOAM-WATER SPRINKLER AND FOAM-WATER SPRAY SYSTEMS
ASME PV CODE SET : 2017 BOILER AND PRESSURE VESSEL CODE - COMPLETE SET
NFPA 120 : 2015 FIRE PREVENTION AND CONTROL IN COAL MINES
NFPA 655 : 2017 PREVENTION OF SULFUR FIRES AND EXPLOSIONS
NFPA 12A : 2015 HALON 1301 FIRE EXTINGUISHING SYSTEMS
NFPA 252 : 2017 STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES
NFPA 80 : 2016 FIRE DOORS AND OTHER OPENING PROTECTIVES

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.