NFPA 654 : 2020
Current
The latest, up-to-date edition.
Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids
Hardcopy
English
25-08-2019
Chapter 1 Administration 1.1 Scope.1.2 Purpose.1.3 Goal. 1.4 Application.1.5 Conflicts. 1.6 Retroactivity.1.7 Equivalency. 1.8 Units and Formulas.Chapter 2 Referenced Publications 2.1 General. 2.2 NFPA Publications.2.3 Other Publications.2.4 References for Extracts in Mandatory Sections. Chapter 3 Definitions 3.1 General. 3.2 NFPA Official Definitions. 3.3 General Definitions.Chapter 4 General Requirements 4.1 Owner’s Obligation.4.2 Objectives.4.3 Compliance Options.Chapter 5 Hazard Identification 5.1 Hazard Identification. Chapter 6 Performance-Based Design Option 6.1 General Requirements.6.2 Performance Criteria.6.3 Design Scenarios.6.4 Evaluation of Proposed Design.Chapter 7 Dust Hazards Analysis (DHA) 7.1 General Requirements. 7.2 Hazard Assessment. Chapter 8 Management Systems 8.1 Retroactivity. 8.2 General. (Reserved) 8.3 Operating Procedures. 8.4 Housekeeping Procedures and Portable Vacuum Cleaners. 8.5 Open Flames and Sparks (Hot Work). 8.6 Personal Protective Equipment (PPE). 8.7 Inspection and Maintenance. 8.8 Employee Training and Procedures. 8.9 Contractors and Subcontractors. 8.10 Emergency Planning and Response. 8.11 Incident Investigation. 8.12 Management of Change. 8.13 Document Retention. (Reserved) 8.14 Management Systems Review. (Reserved) 8.15 Employee Participation. (Reserved) Chapter 9 Hazard Management: Mitigation and Prevention 9.1 Process and Facility Design. 9.2 Building Design.9.3 Equipment Design.9.4 Ignition Source Control. 9.5 Pyrophoric Dusts. (Reserved)9.6 Dust Control.9.7 Explosion Prevention and Protection. 9.8 Fire Protection. Annex A Explanatory Material Annex B Explosion Protection Annex C Informational Primer on Spark Detection and Extinguishing Systems Annex D Dust Layer Characterization and Precautions Annex E Deflagration Propagation Isolation Methods Annex F Use of Water as Extinguishing Agent for Combustible Particulate Solids Annex G Informational References
This standard provides requirements for all phases of the manufacturing, processing, blending, conveying, repackaging, and handling of combustible dusts and particulate solids or hybrid mixtures, regardless of concentration or particle size, where the materials present a fire, a flash fire, or an explosion hazard.
DevelopmentNote |
TIA 20-1, Reference: 1.4.2(new), A.1.4.2(new), 2.4, 3.3.7, A.3.3.7, Various new definitions in 3.3, 8.4.3.7 thru 8.4.3.9, 9.3.13.1.1.2(4)(e) and Annex, 9.4.2, A.9.4.2.2, Table A.9.4.2.2, A.3.3.8, A.9.3.12.2.1, A.9.4.3.6.6, A.9.4.8.2, G.1.2.6, and G.3, Issued Date 12-Apr-2022
|
DocumentType |
Standard
|
ISBN |
978-145592323-6
|
Pages |
76
|
PublisherName |
National Fire Protection Association
|
Status |
Current
|
Supersedes |
NFPA 820:2024 | Standard for Fire Protection in Wastewater Treatment and Collection Facilities |
NFPA 499:2024 | Recommended Practice for the Classification of Combustible Dusts and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Areas |
ICC IFC International Fire Code:2021 | International Fire Code |
ICC IBC INTERNATIONAL BUILDING CODE:2021 | International Building Code |
NFPA 850:2020 | Recommended Practice for Fire Protection for Electric Generating Plants and High Voltage Direct Current Converter Stations |
NFPA 664:2020 | Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
NFPA 80 : 2019 | Standard for Fire Doors and Other Opening Protectives |
NFPA 2113 : 2020 | Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire |
NFPA 101 : 2018 | LIFE SAFETY CODE |
NFPA 400 : 2019 | Hazardous Materials Code |
NFPA 221 : 2018 | HIGH CHALLENGE FIRE WALLS, FIRE WALLS, AND FIRE BARRIER WALLS |
NFPA 51B:2019 | Fire Prevention During Welding, Cutting, and Other Hot Work |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 30B:2019 | Manufacture and Storage of Aerosol Products |
NFPA 750:2019 | Standard on Water Mist Fire Protection Systems |
NFPA 1451 : 2018 | FIRE AND EMERGENCY SERVICE VEHICLE OPERATIONS TRAINING PROGRAM |
NFPA 12A : 2018 | HALON 1301 FIRE EXTINGUISHING SYSTEMS |
NFPA 664 : 2017 | PREVENTION OF FIRES AND EXPLOSIONS IN WOOD PROCESSING AND WOODWORKING FACILITIES |
NFPA 10 : 2018 | PORTABLE FIRE EXTINGUISHERS |
NFPA 484 : 2019 | Standard for Combustible Metals |
NFPA 85:2019 | Boiler and Combustion Systems Hazards Code |
NFPA 220 : 2018 | TYPES OF BUILDING CONSTRUCTION |
NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
NFPA 14 : 2019 | Standard for the Installation of Standpipe and Hose Systems |
NFPA 13 : 2019 | Standard for the Installation of Sprinkler Systems |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
NFPA 252 : 2017 | STANDARD METHODS OF FIRE TESTS OF DOOR ASSEMBLIES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.