• Shopping Cart
    There are no items in your cart

SAE AMS2700E

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Passivation of Corrosion Resistant Steels

Available format(s)

Hardcopy , PDF

Superseded date

18-03-2018

Superseded by

SAE AMS2700F

Language(s)

English

Published date

22-11-2011

€116.29
Excluding VAT

DocumentType
Standard
Pages
17
PublisherName
SAE International
Status
Superseded
SupersededBy
Supersedes

This specification covers the requirements for a process to assure removal of free iron or other less noble contaminants from the surfaces of corrosion resistant steel parts.

SAE AMS5349E Steel, Corrosion-Resistant, Investment Castings 13Cr Free Machining; Hardened and Tempered
MIL-DTL-32460-3 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-55302-94 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE, CRIMP TYPE HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
SAE AS4468G Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification
MIL-DTL-55302-190 Revision B:2011 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 100 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
MIL-DTL-32480-1 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32372-4 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MIL-DTL-83513-30 Revision B:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
DSCC 85034 : E HOLDER, ELECTRICAL CARD, METAL, CARD GUIDE
SAE AS 4723 : 2012 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR
MS51819 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-83413-12 Revision A:2015 Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Stainless Steel Clip, Electrical
BS EN 6092:2016 Aerospace series. Receptacle, floating, double lug
MS51510 Revision D:2017 TEE, TUBE, 37 DEGREE FLARED
MS51525 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
MS39210 Revision K:2018 NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE
MIL-DTL-52471-10 Revision B:2008 Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose
MIL-DTL-52525-35 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-32480-5 Base Document:2014 Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MS51814 Revision E:1987 NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-10 Base Document:2012 Fittings, Hydraulic Tube, Sleeve, Double Angle
MIL-DTL-32371-4 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch
SAE AS4841B Fittings, 37° Internal Flare, Fluid Connection, Procurement Specification
SAE AMS5346C Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5)
MIL-DTL-52525-10 Revision D:2011 Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight
16/30354034 DC : 0 BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS
MIL-DTL-32372-12 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run
MS51519 Revision C:2017 NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED
DSCC 93007 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 296 CONTACT POSITIONS
MIL-DTL-83796-10 Revision A:2014 HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE
MIL-DTL-55302-163 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories, Plug, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric
MIL-DTL-52525-7 Revision D:2011 Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop
AN915 Revision 14:2015 ELBOW, PIPE, 45 DEGREES
MIL-DTL-32464-6 Base Document:2013 Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
MS39206 Revision G:2012 ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END
MIL-DTL-32480 Base Document:2014 Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for
MIL-DTL-55302-5 Revision F:2008 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Straight-thru, for Multilayered Printed Wiring Boards (.100 Spacing)
MIL-DTL-8783 Revision D:2009 Clamp, Hose, Flat Band 500 Degrees F, General Specification for
MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
MIL-DTL-55302-93 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, INSERT (INSULATOR), RECTANGULAR, POLARIZED, REMOVABLE CRIMP TYPE, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
17/30369678 DC : 0 PREN 7010 - AEROSPACE SERIES - USER GUIDE FOR CREATION AND DESIGNATION OF BOLTS
MIL-DTL-55302-90 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, RIGHT ANGLE, HERMAPHRODITIC CONTACT (.100 INCH SPACING)
SAE AS4892A Insert, Screw Thread, Self-Locking, UNS S66286, Locked In, Key Locked Procurement Specification For
MIL-DTL-32464-1 Base Document:2013 Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-32464-12 Base Document:2013 Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI
MS27086 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 90 Degrees Swivel Nut
MIL-DTL-83796-11 Revision A:2014 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole
MS27087 Revision D:2013 Elbow, Nipple End, Flared, Tube to Hose - 45 Degrees Swivel Nut
MIL-DTL-53072 Revision F:2017 CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION
SAE AS5960B Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35 000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems
MIL-DTL-83513-32 Revision B:2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
MIL-DTL-45916 Revision C:2014 INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING
MS35758 Revision D:2012 CUPS, GREASE, MANUAL FEED
MIL-DTL-55302-113 Revision F:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, 30 THRU 110 CONTACT POSITIONS, CRIMP REMOVABLE CONTACTS (.100 SQ. GRID)
MIL-DTL-83513-13 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, NARROW PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-83503 Revision C:2005 Connectors, Electrical, Flat Cable, and/or Printed Wiring Board, Nonenvironmental General Specification for
MIL-DTL-5002 Revision E:2011 SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS
MS39199 Revision G:2012 NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING
MS51825 Revision H:2008 SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC
MIL-DTL-52525-32 Revision A:2008 FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE
MS51534 Revision A:1979 REDUCER, TUBE, 37 DEGREE FLARED
MS51811 Revision E:1987 TEE, TUBE, FLARELESS TYPE HYDRAULIC
MIL-DTL-52525-44 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MIL-DTL-32480-6 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead
MIL-DTL-32372-8 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-32372-9 Revision A:2017 Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MIL-DTL-613 Revision D:2014 Grapnels, Marine, Trip Wire, and Crash Truck
AN849 Revision 13:2015 NIPPLE, HOSE
AN838 Revision 9:2011 Elbow, Tube to Hose, 90 Degrees
MIL-DTL-52525-1 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose
MS51501 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT
MS51528 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED
MIL-DTL-52525-43 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL-DTL-32372-7 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel
MS51816 Revision E:1987 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-32371-3 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow
MIL-DTL-52525-11 Revision C:2008 Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube
MS51521 Revision C:2017 ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED
MIL-DTL-32372-6 Revision A:2017 Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead
MIL-DTL-83513-27 Revision D:2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 4 Row, Solder Type, 100 Contacts, Printed Circuit Board
MIL-DTL-32371-6 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long
MIL-DTL-23599 Revision C:2017 Hook, Rescue
MIL-DTL-55302-161 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 160 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric
MIL-DTL-83513-33 Revision B:2008 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
17/30363748 DC : DRAFT JUL 2017 BS EN 3660-033 - AEROSPACE SERIES - CABLE OUTLET ACCESSORIES FOR CIRCULAR AND RECTANGULAR ELECTRICAL AND OPTICAL CONNECTORS - PART 033: STAINLESS STEEL BANDING BAND, STYLE Z, FOR ATTACHMENT OF INDIVIDUAL AND/OR OVERALL SCREENS TO CABLE OUTLETS - PRODUCT STANDARD
MIL-DTL-32372 Revision A:2016 Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F
MS27077 Revision D:2014 FLANGE, SWIVEL, RETAINING
14/30310863 DC : 0 BS EN 4833 - AEROSPACE SERIES - PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING - FLARED END - INCH SERIES - WITH EXTRA FINE THREAD PITCH
AN815 Revision 10:2015 UNION - FLARED TUBE
A-A-55469 Revision B:2015 CONNECTORS, ELECTRICAL, PLUGS, TIP (TEST POINT PLUG, BANANA PLUG) GENERAL REQUIREMENTS FOR
MIL-DTL-85052-14 Base Document:2017 Clamp, Loop, Stainless Steel, 500 Degrees F, Silicone Rubber, Fabric Reinforced
MS51509 Revision D:2017 ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED
MS51524 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED
MIL-DTL-55302-61 Revision G:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, AND 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MS51502 Revision C:2016 NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG
MIL-DTL-52525-40 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT
MIL-DTL-55302-63 Revision H:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-55302-62 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-13220-3 Revision B:2015 HOOK, SLIP, EYE
MIL-DTL-8878 Revision L:2014 TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR
MS51529 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING
MIL-DTL-32234-9 Base Document:2007 CONNECTOR, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, KEYING PINS AND BUSHINGS
MS27076 Revision E:2013 Nipple, Straight, Swivel Flange
AN846 Revision 9:2013 ELBOW, HOSE, 45 DEGREES
MS51532 Revision B:1988 FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED
MIL-DTL-32372-2 Revision A:2017 Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32480-7 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MS51520 Revision C:2017 NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED
MIL-DTL-83796-4 Revision C:2014 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE
MS9193 Revision A:2010 NIPPLE, TUBE - SAE-AMS5639, BOSS
MIL-DTL-52471-1 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL-DTL-13220 Revision G:2015 HOOK, SLIP (FOR USE WITH WIRE ROPE OR CHAINS)
MIL-DTL-52525-6 Revision C:2008 Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube
MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
SAE AMS5364C Steel, Corrosion and Heat-Resistant, Investment Castings 19.5Cr - 10.5Ni - 0.65Cb (CF-8C) Solution Heat Treated
MIL-DTL-83798-4 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight
MS51507 Revision D:2017 ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED
MS51516 Revision C:2017 TEE, BULKHEAD ON RUN 37 DEGREE FLARED
MS51508 Revision D:2017 ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED
MIL-DTL-32371-9 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run
MIL-DTL-52525-36 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MIL-DTL-52525-15 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE
PREN 4832 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
DSCC 93012 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS
PREN 6094 : 200P2 AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK
PREN 6090 : 200P1 AEROSPACE SERIES - WASHER, RETAINING
SAE ARP994B Design of Tubing Installations for Aerospace Hydraulic Systems
PREN 6093 : 200P1 AEROSPACE SERIES - RECEPTACLE, FLOATING, SINGLE LUG
SAE AS6116A Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for
SAE AS45909A Stud, Locked In, Ring Locked, Serrated, General Specification For
SAE AS7474D Bolts and Screws, Steel, Corrosion-Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification
SAE AS4623E Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3,000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems
DSCC 84191 : K EXTRACTOR, ELECTRICAL CARD, METAL
NASM 21083 : 2004 NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F
SAE AS81820D Bearings, Plain, Self-Aligning, Self-Lubricating, Low Speed Oscillation
SAE AS18280F Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
SAE AS4108C T-Bolt and Eye Bolt, A286 CRES, 1000 °F Fatigue Rated
16/30340711 DC : 0 BS EN 16602-70-14 - SPACE PRODUCT ASSURANCE - CORROSION
SAE AS18280/2A Sleeves, Internally or Externally Swaged or Welded, 24° Cone Flareless Fitting, 3000 psi
BS EN 6105:2016 Aerospace series. Stud with shoulder
SAE AS95234A Connectors, Electrical, Reverse Bayonet, General Specification for
MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
MIL-DTL-83513-5 Revision H:2007 CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, MOUNTING HARDWARE
MIL-DTL-27272 Revision D:2015 Fittings, Polytetrafluoroethylene Hose, High-Temperature, Medium-Pressure, General Specification for
MIL-PRF-31031 Revision C:2014 CONNECTORS, ELECTRICAL, PLUGS AND RECEPTACLES, COAXIAL, RADIO FREQUENCY, HIGH RELIABILITY, FOR FLEXIBLE AND SEMIRIGID CABLES, GENERAL SPECIFICATION FOR
MIL-PRF-39012 Revision F:2014 CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
DEFSTAN 03-2/6(2011) : 2011 CLEANING AND PREPARATION OF METAL SURFACES
MIL-DTL-45952 Revision A:2014 PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR
MIL-DTL-13791-22 Revision A:2016 MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A
MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
MIL-DTL-28748 Revision D:2001 CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR
MIL-DTL-781 Revision J:2014 TERMINAL, WIRE ROPE SWAGING, GENERAL SPECIFICATION FOR
MIL-STD-1353 Revision C:2014 ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF
MIL-DTL-32360 Base Document:2010 STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL
OO-K-220 Revision C:2015 KEY, MACHINE
MIL-DTL-22263 Revision C:2009 Coupling Fuel Line, Flexible, 125 PSI General Specification for
MIL-DTL-25579 Revision H:2014 Hose Assembly, Polytetrafluoroethylene, High Temperature, Medium Pressure, General Specification for
A-A-59590 Revision D:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 3 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-28748-17 Revision B:2016 CONNECTORS, ELECTRICAL, RECTANGULAR, RACK AND PANEL, HARDWARE FOR
A-A-59789 Revision B:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 5 PIECE, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-55302-92 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL-DTL-32460-8 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
14/30310866 DC : 0 BS EN 4836 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREE CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER- FLARED END - WITH EXTRA FINE THREAD PITCH - INCH SERIES
MS27082 Revision E:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 90 DEGREES
MIL-DTL-28840-25 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, METAL CONDUIT FOR EMI SHIELDING
MIL-DTL-83513-29 Revision B:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-24308-26 Revision M:2015 Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Female
MIL-DTL-28840-30 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT COUPLING
AN841 Revision 7:2013 ADAPTER - HOSE TO FLARED TUBE
SAE AMS5366E Steel, Corrosion and Heat-Resistant, Investment Castings 25Cr - 20Ni (CK-20) As-Cast
MIL-DTL-32464-7 Base Document:2013 Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MS39207 Revision H:2018 Elbows, Tube - Safety Sleeve Compression Type, 90 Degree
MIL-DTL-55302-164 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG AND/OR RECEPTACLE, 160 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
10/30227763 DC : 0 BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES
SAE AS4875A Fittings, Straight Threaded Boss or Flanged, Fluid Connection
MIL-DTL-83513-25 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-32464-2 Base Document:2013 Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
SAE AS81934B Bearings, Sleeve, Plain and Flanged, Self-Lubricating
MIL-DTL-55302-159 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, RECEPTACLE, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
MIL-DTL-25427 Revision B:2009 COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR
MIL-DTL-83513-22 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 2 ROW, SOLDER TYPE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
SAE ARP5796 Flight Critical Control Valves, Military Aircraft
MIL-DTL-28840-23 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, GLAND NUT, WIRING
MIL-DTL-83513-17 Revision D:2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
MIL-DTL-32464-4 Base Document:2013 Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI
MIL-DTL-21097 Revision H:2017 Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for
MIL-DTL-83513-19 Revision D:2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board
MIL-DTL-55302-55 Revision G:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Socket Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing)
MIL-DTL-83513-21 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-83513-24 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 4 ROW, SOLDER TYPE, 100 CONTACTS, PRINTED CIRCUIT BOARD
MS27072 Revision F:2013 WIRE, RETAINER
A-A-59950 Base Document:2014 HOLDER, ELECTRICAL CARD, WEDGE RETAINERS, 7 BODY, FOR COLD PLATE APPLICATIONS, GENERAL REQUIREMENTS FOR
MIL-DTL-83798-5 Revision E:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees
MIL-DTL-83513-11 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 3 ROW, SOLDER TYPE, NARROW PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-83296 Revision B:2009 Fittings, Corrosion Resistant Steel, High Temperature, High Pressure (3000 PSI), Hydraulic and Pneumatic, General Specification for
MIL-DTL-55302-31 Revision L:2007 Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
MIL-DTL-83298 Revision C:2009 Hose, Conductive Polytetrafluoroethylene Tube, High Temperature, High Pressure (3000 PSI), Hydraulicand Pneumatic
MIL-DTL-83513-18 Revision D:2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
MIL-DTL-32464-8 Base Document:2013 Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-39030-5 Revision C:2003 DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 4 (TNC), LOW POWER
MIL-DTL-39030-3 Revision E:2013 DUMMY LOADS, ELECTRICAL, COAXIAL, TYPE 1 (SMA), LOW POWER
AN844 Revision 13:2013 ELBOW - PIPE TO HOSE, 45 DEGREES
MS18194 Revision E:2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, LONG, TURNABLE
MIL-DTL-13220-2 Revision B:2015 HOOK, SLIP, CLEVIS, WITH LATCH
MIL-DTL-83513-23 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 3 ROW, SOLDER TYPE, 51 CONTACTS, PRINTED CIRCUIT BOARD
NASM39086:1999 PIN, SPRING, TUBULAR, COILED, HEAVY DUTY
MIL-PRF-39012-55 Revision H:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, CLASS 2)
AN807 Revision 7:2007 Adapter, Straight, Tube to Hose
MIL-DTL-83513-26 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, 51 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-6001 Revision B:2013 FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE
MS9194 Revision C:2010 Elbow, Tube - SAE-AMS5646, Boss, 90 Degrees
MIL-DTL-55302-57 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-52525-13 Revision C:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT
MIL-DTL-32464 Revision A:2017 FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR
MIL-DTL-32464-10 Base Document:2013 Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-83513-10 Revision D:2008 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 2 ROW, SOLDER TYPE, NARROW PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-32371 Base Document:2012 Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for
PREN 6092 : 200P2 AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG
PREN 6089 : 200P2 AEROSPACE SERIES - WASHER, RETAINING, FOR USAGE WITH STUD EN 6088
MIL-DTL-28754 Revision E:2016 Connectors, Electrical, Modular, and Component Parts General Specification for
MIL-DTL-32460-7 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MIL-DTL-32460-5 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
SAE AS85052A Clamp Assembly, Loop Type, Cushioned, General Specification For
MIL-DTL-32464-5 Base Document:2013 Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI
SAE AS620G Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft
I.S. EN 6105:2016 AEROSPACE SERIES - STUD WITH SHOULDER
SAE AS5958F Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for
SAE AS39901B Bearings, Roller, Needle, Airframe, Antifriction, Inch
I.S. EN 6090:2016 AEROSPACE SERIES - WASHER, RETAINING
SAE AMS5347B Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5)
SAE AS1975G Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems
SAE AMS 5356 : 2016 STEEL, CORROSION RESISTANT, INVESTMENT CASTINGS, 15CR - 4.6NI - 0.22CB - 2.8CU, SOLUTION AND PRECIPITATION HEAT TREATED (H1100), 130 KSI (896 MPA) TENSILE STRENGTH
SAE AMS5342E Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)
SAE AS 1701 : 2017 LUBRICANT, SOLID FILM
SAE AS85449A Clamp Assembly, Saddle Type, Cushioned, General Specification For
MIL-DTL-45932 Revision A:2015 INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR
SAE AS82819 Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm Oscillation (13 fpm), -65 to +160 °F (-54 to +71 °C), Liners Less Than 0.015 inches
MIL-DTL-13444 Revision H:2006 Hose and Hose Assemblies, Rubber: Fuel and Oil
MIL-DTL-26633 Revision F:2014 Hose Assembly, Nonconductive, Polytetrafluoroethylene, Oxygen
MIL-DTL-55302-7 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-52525-5 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight
MIL-DTL-52525-34 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT
MIL-DTL-52525-2 Revision C:2008 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube
MIL-DTL-18866 Revision J:2015 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for
MS39202 Revision G:2012 Elbows, Pipe to Tube - Safety Sleeve Compression Type, 90 Degree, Male Pipe End
MS39201 Revision G:2012 Nipple, Tube-Safety Sleeve Compression Type
MS27075 Revision D:2013 NIPPLE, FLARED, TUBE TO HOSE - SWIVEL NUT
MS27071 Revision D:2013 UNION, NIPPLE
MS27625 Revision D:2018 Wire, Retainer
SAE AS18280/1C Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi
MS27070 Revision E:2013 SLEEVE, HOSE COUPLING
MIL-DTL-19068 Revision B:2006 VALVES, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 2 SYSTEMS
MS20762 Revision D:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES
MIL-DTL-32460-1 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
DSCC 93006 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 296 CONTACT, 2 POWER POSITIONS
MIL-DTL-55181-4 Revision D:2008 Connector, Receptacle, Electrical, Panel Mount, Waterproof, 4 Socket Contacts, 35 AMP
MS18195 Revision C:2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE
MIL-PRF-55339 Revision C:2005 Adapters, Connectors, Coaxial, Radio Frequency, (Between Series and within Series), General Specification for
MIL-DTL-55302-89 Revision E:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, RIGHT ANGLE, HERMAPHRODITIC CONTACTS (.100 SPACING)
AN842 Revision 13:2013 ELBOW - PIPE TO HOSE, 90 DEGREES
MS39324 Revision C:2017 ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE
MIL-DTL-55302-182 Revision C:2008 Connectors, Printed Circuit Subassembly and Accessories: Guide Pins, Jackscrews and Mounting Ears
MIL-DTL-32234 Base Document:2007 CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR
MIL-DTL-38999-28 Revision H:2015 CONNECTORS, ELECTRICAL, CIRCULAR, NUT, HEXAGON, CONNECTOR MOUNTING, SERIES 3 AND 4, METRIC
MIL-DTL-83513-31 Revision B:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATUREE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-55302-162 Revision D:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PLUG, 17, 29, 33, 41, 53, AND 65 CONTACT POSITIONS, FOR PRINTED WIRING BOARDS, 2.54 MM X 1.27 MM OFFSET GRID, METRIC
MS51842 Revision E:2017 ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC
MS18205 Revision C:2013 PIN, STRAIGHT HEADED
BS EN 6090:2016 Aerospace series. Washer, retaining
DSCC 93004 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 300 CONTACT, 8 FIBER OPTIC POSITIONS
10/30227764 DC : 0 BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES
DSCC 93013 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 280 CONTACT, 2 POWER POSITIONS, WITH SAFETY GROUND
SAE AMS5344F Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4)
MIL-DTL-32460-6 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-32460 Revision A:2017 ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
MIL-DTL-83796-1 Revision C:2014 Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare
MIL-DTL-83798 Revision D:2008 FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR
MIL-DTL-8795 Revision G:2014 Hose Assemblies, Elastomeric, Hydraulic, Fuel, Coolant, and Oil Resistant, General Specification for
MIL-DTL-55302-96 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, WRAPPOST (REMOVABLE) HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
A-A-55563 Revision D:2013 Holder, Electrical Card, Metal Card Guide, General Requirements for
MIL-DTL-52525-38 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE
SAE AS4459B Fittings, Tube, Fluid System 3000 psig (21 000 kPa) Rated Pressure, Externally Swaged, Specification For
MIL-DTL-83513-16 Revision D:2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board
MIL-DTL-5675 Revision C:2005 Shackle: Cable, Aircraft
MIL-DTL-28840-15 Revision E:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, PLUG
MIL-DTL-55302-160 Revision D:2004 Connectors, Printed Circuit Subassembly and Accessories, Receptacle, 72, 84, 96, and 120 Contact Positions, for Printed Wiring Boards, 2.54 MM X 1.27 MM Offset Grid, Metric
MS51522 Revision C:2017 ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED
MIL-DTL-83796-13 Base Document:2008 Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole
MS51512 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-3 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop
MIL-DTL-85052-12 Base Document:2017 Clamp, Loop, Stainless Steel, 400 Degrees F, Fluorosilicone
MS51531 Revision B:1985 NUT, TUBE COUPLING, 37 DEGREE FLARED
MS39322 Revision B:2017 ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH
MIL-DTL-55116 Revision D:2013 CONNECTORS: MINIATURE AUDIO, FIVE-PIN AND SIX-PIN - GENERAL SPECIFICATION FOR
MIL-DTL-32464-11 Base Document:2013 Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI
14/30310862 DC : 0 BS EN 4832 - AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING AND RING-LOCKED FITTING-REDUCER - INCH SERIES - TECHNICAL SPECIFICATION
MIL-PRF-39012-79 Revision G:2008 CONNECTORS, PLUG, ELECTRICAL, COAXIAL, RADIO FREQUENCY, SERIES SMA (CABLED) PIN CONTACT, CLASS 2, SEMIRIGID CABLE
MIL-DTL-27235 Revision B:2014 Pin, Straight, Headed (Clevis Pins)
SAE AMS03_2A Cleaning and Preparation of Metal Surfaces
MIL-DTL-55302-4 Revision F:2008 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, RIGHT-ANGLE, FOR MULTILAYERED PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-83513-14 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, NARROW PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD
MS9769 Revision B:2008 REDUCER, TUBE - STRAIGHT, TUBE TO BOSS
MIL-DTL-55302-56 Revision H:2004 Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Pin Contacts, Decade Increments 10 thru 70 Contact Positions and Intermediate Positions of 14, 24, 44, 54 and 26, 36, 56, 66 for Printed Wiring Boards (.100 Spacing)
MIL-DTL-85052-11 Base Document:2017 Clamp, Loop, Stainless Steel, 275 Degrees F, Side Lock, Ethylene Propylene
MS51533 Revision A:1979 SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED
MS51526 Revision A:1979 ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG)
MIL-DTL-55302-192 Revision A:2006 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, 122 AND 152 POSITIONS, PRINTED WIRING BOARD (.075 SPACING)
MIL-DTL-24308-25 Revision K:2008 Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Male
MS9195 Revision B:2010 ELBOW, TUBE - SAE-AMS5639, BOSS, 45 DEGREES
MIL-DTL-55302-66 Revision G:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-28840-8 Revision F:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 90 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-12883-50 Revision B:2003 Sockets and Accessories for Plug-in Electronic Components, Brackets and Socket Assembly for Relays, 2-Pole, 10 Amperes (MIL-PRF-6106 and MIL-PRF-83536)
MS51530 Revision B:1988 FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED
MS20756 Revision F:2011 FLANGE, SWIVEL, RETAINING
MIL-DTL-39030-23 Base Document:2015 Dummy Load, Electrical, Coaxial, Type I (SMK), DC-32.0 GHz
MIL-DTL-13220-5 Revision B:2015 HOOK, SLIP, EYE, WITH LATCH
MIL-DTL-32372-11 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch
MIL-DTL-55181-6 Revision D:2008 Connector, Receptacle, Electrical, Waterproof, 9 Socket Contacts, Solder Cup, 7.5 AMP
MS18197 Revision G:2016 GUIDE PIN, ELECTRICAL CONNECTOR MALE AND FEMALE
MIL-DTL-52525-9 Revision C:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-83796-3 Revision C:2014 Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flareless to Flareless
AN914 Revision 11:2012 ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES
SAE AMS5343E Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4)
MS20761 Revision C:2016 ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES
DSCC 93011 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
SAE AS4842A Fittings and Bosses, Pipe Threaded, Fluid Connection
SAE AS22227C Bearing, Ball, Annular, Generator and Motor Generator
SAE AMS5400C Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength
SAE AS6450B Lubricant Application, Solid Film, Heat Cured, Potable Water, Hydraulic, and Other Fluid Systems
SAE MA3377C Bolts and Screws, Nickel Alloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric
I.S. EN 6092:2016 AEROSPACE SERIES - RECEPTACLE, FLOATING, DOUBLE LUG
PREN 16602-70-14 : DRAFT 2016 SPACE PRODUCT ASSURANCE - CORROSION
NASA KSC C 123 : 2009 SURFACE CLEANLINESS OF GROUND SUPPORT EQUIPMENT FLUID SYSTEMS, SPECIFICATION FOR
MIL-DTL-13791 Revision H:2015 DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT
NASA STD 6012 : 2012 CORROSION PROTECTION FOR SPACE FLIGHT HARDWARE
MIL-DTL-52525-17 Revision C:2008 FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE
NASA MSFC HDBK 3697 : 2014 ELECTRICAL BONDING DESIGN GUIDE HANDBOOK
MIL-DTL-52525-31 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL
MIL-DTL-55302 Revision G:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES
A-A-59832 Revision B:2016 EXTRACTOR, ELECTRICAL CARD, METAL, GENERAL REQUIREMENTS FOR
MS18173 Revision B:2012 Washer, Flat
MIL-DTL-21248 Revision D:2015 Ring, Retaining (Tapered and Reduced Section Type)
MIL-DTL-52525 Revision F:2008 FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR
MS9196 Revision C:2015 TEE, TUBE - SAE-AMS5646, BOSS
MIL-DTL-32480-2 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-32434 Base Document:2013 Hose Assembly, Polytetrafluoroethylene, Convoluted, High Temperature, Medium Pressure, General Specification for
MS27391 Revision F:2013 Nipple, Flareless, Tube to Hose - Swivel Nut
MIL-DTL-55302-124 Revision A:2006 Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
MIL-DTL-28754-41 Revision C:2015 Connectors, Electrical, Modular, Type IV, Connector Assembly, Screw, Insert
MIL-DTL-12883-53 Revision B:2003 SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, MOUNTING TRACK, FOR RELAY SOCKETS AND ELECTROMAGNETIC RELAYS
MIL-DTL-28840-3 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 45 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
MIL-DTL-55074 Revision G:2013 Connectors, Plug and Receptacle, Telephone, Electrical, Subassembly and Accessories and Contact Assembly, Electrical, General Specification for
MIL-DTL-24308 Revision G:2009 Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for
MIL-DTL-83513-12 Revision D:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, PIN CONTACTS, 4 ROW, SOLDER TYPE, NARROW PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
MIL-DTL-83413-7 Revision F:2015 Connectors and Assemblies, Electrical, Aircraft Grounding: Grounding Clamp Connector for Types I and III Grounding Assemblies, Aluminum Clip, Electrical
MIL-DTL-32480-8 Base Document:2014 Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-PRF-49142 Revision B:2004 CONNECTOR, TRIAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR
MIL-DTL-32460-4 Base Document:2013 FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD
MIL-DTL-83413-4 Revision E:2014 CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: PLUGS, FOR TYPES 1 AND 2 GROUNDING ASSEMBLIES
MIL-DTL-28754-17 Revision E:2014 Connectors, Electrical, Modular, Connector Assembly, Type V, Style I, Contact Tails on .100 Centers
MIL-DTL-32372-5 Revision A:2017 Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead
MIL-DTL-85069 Revision D:2012 Sleeves and Grommets, Fastener,
MIL-DTL-32464-3 Base Document:2013 Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI
MIL-DTL-32372-10 Revision A:2017 Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch
MIL-DTL-28840-1 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, STRAIGHT, OPEN, FOR ELECTRICAL CONNECTORS
BS EN 6094:2016 Aerospace series. Washer, spring, countersunk
MIL-DTL-13220-1 Revision B:2015 HOOK, SLIP, CLEVIS
MIL-DTL-55181-2 Revision D:2008 Connector, Receptacle, Electrical, Panel Mount, Waterproof, 4 Pin Contacts, Solder Turret, 35 AMP
MS18196 Revision G:2016 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
16/30354035 DC : 0 BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS
MIL-DTL-83517 Revision B:2015 Connector, Coaxial, Radio Frequency for Coaxial, Strip or Microstrip Transmission Line General Specification for
MIL-STD-171 Revision F:2011 FINISHING OF METAL AND WOOD SURFACES
MIL-DTL-5070 Revision F:2006 ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR
MIL-DTL-83522 Revision E:2013 Connectors, Fiber Optic, Single Ferrule, General Specification for
MIL-DTL-32480-3 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male
MIL-DTL-52471-8 Revision B:2008 Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE
MIL-DTL-8789 Revision G:2015 FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR
DSCC 93009 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 356 CONTACT, WITH SAFETY GROUND
MIL-DTL-13220-4 Revision B:2015 HOOK, SLIP, SWIVEL EYE, WITH LATCH
MIL-DTL-32460-9 Base Document:2013 FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL
MIL-DTL-26666 Revision G:2006 Hose Assembly, Pneumatic, High Pressure
AN848 Revision 13:2015 Elbow, Hose, 90 Degree
MIL-DTL-85052-15 Base Document:2017 Clamp, Loop, Stainless Steel, 550 Degrees F, Poly-Tetrafluoroethylene (PTFE)
MIL-DTL-83513-15 Revision E:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, RIGHT ANGLE, SOCKETS CONTACTS, 4 ROW, SOLDER TYPE, NARROW PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
AN 840 : 0011 ADAPTER, STRAIGHT, PIPE TO HOSE
MIL-DTL-32464-9 Base Document:2013 Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI
MIL-DTL-55302-60 Revision J:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS (.100 SPACING)
MS51818 Revision E:1987 TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC
MIL-DTL-55302-191 Revision C:2011 Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Decade Increments 10 thru 100 Positions, Printed Wiring Board (.075 Spacing)
MIL-DTL-55302-65 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
AN 839 : 0009 ELBOW, TUBE TO HOSE, 45 DEGREES
MIL-DTL-28840-2 Revision F:2013 CONNECTOR ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLAMPS, STRAIN RELIEF, 90 DEGREES, OPEN, FOR ELECTRICAL CONNECTORS
MIL-DTL-32371-1 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight
SAE AS5000C Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35 000 kPa), Specification for
MIL-DTL-52525-16 Revision D:2008 FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC)
MS27394 Revision C:2014 ELBOW, FLARELESS, TUBE TO HOSE - 90 DEGREE SWIVEL NUT
MIL-DTL-52471-2 Revision C:2008 HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE
MIL-DTL-52525-37 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT
MIL-DTL-52471-3 Revision C:2008 HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE
MIL-DTL-21617-29 Base Document:2003 CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS
MS51841 Revision E:2017 TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC
SAE AMS5368D Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.0Ni - 2.3Mo - 0.09N Solution Heat Treated
SAE AS85049D Connector Accessories, Electrical General Specification For
SAE AS1339H Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic
SAE AMS5357D Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable
SAE AS12500 Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
SAE AMS5352F Steel, Corrosion-Resistant, Investment Castings 17Cr - 0.55Mo (0.95 - 1.20C) Annealed
FF-S-1362 Revision A:2014 STUD, PLAIN, GENERAL PURPOSE
EN 6094:2016 Aerospace series - Washer, spring, countersunk
EN 6092:2016 Aerospace series - Receptacle, floating, double lug
EN 6090:2016 Aerospace series - Washer, retaining
EN 6105:2016 Aerospace series - Stud with shoulder
DSCC 93010 : B CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 284 CONTACT, 8 FIBER OPTIC AND SAFETY GROUND
MS51517 Revision C:2017 CROSS, TUBE, 37 DEGREE FLARED
MIL-DTL-32372-1 Revision A:2017 Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MIL-DTL-32371-8 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead
MIL-DTL-55302-95 Revision E:2004 Connectors, Printed Circuit Subassembly and Accessories: Plug, Composite Wrappost, Hermaphroditic Contacts (.100 Inch Spacing)
MIL-DTL-32480-9 Base Document:2014 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel
MIL-DTL-32371-5 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch
MIL-DTL-32371-7 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead
MS51500 Revision F:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED
MIL-DTL-28754-24 Revision C:2014 Connectors, Electrical, Modular, Pin, Keying
MS51505 Revision C:2016 ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED
MIL-STD-648 Revision E:2016 Specialized Shipping Containers
MIL-DTL-55302-64 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-55302-193 Revision B:2009 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, 122 AND 152 POSITION, PRINTED WIRING BOARD (.075 SPACING)
MIL-DTL-55302-59 Revision H:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, PIN CONTACTS, DECADE INCREMENTS 90, 100 AND 120 CONTACT POSITIONS FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-83513-28 Revision B:2009 CONNECTORS, ELECTRICAL, RECTANGULAR, PLUG, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, PIN CONTACTS, 2 ROW, SOLDER TYPE, STANDARD PROFILE, 9 THROUGH 37 CONTACTS, PRINTED CIRCUIT BOARD
MS27612 Revision M:2013 ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE
MIL-DTL-32480-4 Base Document:2014 Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead
MIL-DTL-52525-45 Base Document:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE
MS51513 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-8 Revision C:2008 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop
SAE AS 81914 : 2016 TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR
MIL-DTL-32371-2 Base Document:2012 Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow
MS51506 Revision E:2017 FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED
MS51527 Revision D:2000 Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared
SAE AS4843A Fittings, Beaded, Fluid Connection
MIL-DTL-52525-39 Revision B:2008 FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE
MS51815 Revision F:1987 ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MS39323 Revision C:2017 FITTING, TUBE, REDUCER: 37 DEGREE FLARE
MS51523 Revision C:2017 TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED
MIL-DTL-28840-5 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, METAL CONDUIT FOR EMI SHIELDING
SAE AMS 5350 : 2017 STEEL, CORROSION AND MODERATE HEAT-RESISTANT, INVESTMENT CASTINGS, 12.5CR (410), HARDENED AND TEMPERED
MIL-DTL-52525-14 Revision C:2008 FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT
MIL-DTL-83796-12 Base Document:2008 HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS
MIL-DTL-21617 Revision B:2012 CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR
MS51511 Revision D:2017 TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED
MS51812 Revision F:1987 NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC
MS51515 Revision D:2017 TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED
MIL-DTL-52525-41 Revision A:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE
MS51817 Revision E:1987 ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-52525-42 Revision B:2008 FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT
MS51820 Revision E:1987 ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC
MS51518 Revision C:2017 PLUG, MACHINE THREAD, 37 DEGREE FLARED
I.S. EN 6094:2016 AEROSPACE SERIES - WASHER, SPRING, COUNTERSUNK
MS51813 Revision E:1987 ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC
MIL-DTL-83798-2 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees
MIL-DTL-52525-12 Revision D:2011 Fittings, Hose, Screw on to Split-Flange 90 Degree Bent
SAE AMS5560N Steel, Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (304) Solution Heat Treated
MIL-DTL-85052-13 Base Document:2017 Clamp, Loop, Stainless Steel, 212 Degrees F, Chloroprene
MIL-DTL-28840-22 Revision C:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, METAL CONDUIT BUSHING
SAE AMS5360F Steel, Corrosion and Heat-Resistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated
MIL-DTL-32460-2 Base Document:2013 FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE
MIL-DTL-52525-33 Revision A:2008 FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE
MIL-PRF-39012-80 Revision F:2008 Connectors, Plug, Electrical, Coaxial, Radio Frequency, Series SMA (Cabled) Pin Contact, Right Angle, Class 2, Semirigid Cable
MIL-DTL-13719 Revision G:2012 HOSE AND HOSE ASSEMBLY, RUBBER, HYDRAULIC BRAKE, TYPE 1 AND TYPE 2
MIL-DTL-55302-58 Revision J:2004 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, SOCKET CONTACTS, DECADE INCREMENTS 10 THRU 70 CONTACT POSITIONS AND INTERMEDIATE POSITIONS OF 14, 24, 44, 54 AND 26, 36, 56, 66 FOR PRINTED WIRING BOARDS (.100 SPACING)
MIL-DTL-21338 Revision B:2014 Washer, Key Retaining, Ball and Roller Bearings
DSCC 93003 : C CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 372 CONTACT POSITIONS
SAE AS95234 Connectors, Electrical, Reverse Bayonet, General Specification For
MS39212 Revision K:2018 SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE
MIL-DTL-52525-4 Revision D:2011 Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop
MS51503 Revision C:2016 ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED
MS51514 Revision D:2017 TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED
MIL-DTL-83798-6 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees
MIL-DTL-25677 Revision G:2016 ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR
MIL-PRF-39012-56 Revision G:2011 CONNECTORS, PLUGS, ELECTRICAL, COAXIAL, RADIO FREQUENCY (SERIES SMA (CABLED) - PLUG, PIN CONTACT, RIGHT ANGLE, CLASS 2)
MS27613 Revision G:2015 CONNECTORS, ELECTRICAL, RECEPTACLE, PANEL MOUNT, FIREWALL SERIES
MIL-DTL-85052-16 Base Document:2017 Clamp, Loop, Stainless Steel, 275 Degrees Fahrenheit, Nitrile Butadiene Rubber Fuel and Petroleum Based Hydraulic Fluid Resistant
MIL-DTL-32372-3 Revision A:2017 Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male
MS51504 Revision C:2016 ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED
A-A-59553 Revision A:2012 COUPLING HALVES, CAP AND WYE; QUICK DISCONNECT PNEUMATIC HOSE, TWO-LUG UNIVERSAL TYPE
MS27069 Revision H:2017 SOCKET, HOSE COUPLING
SAE AS5951D Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems
MIL-DTL-28840-9 Revision G:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-83796-2 Revision C:2014 Hose Assembly, Rubber, Lightweight, Medium Pressure, Field Attachable End Fittings, Flare to Flare, with Lockwire Hole
PREN 6091 : 200P1 AEROSPACE SERIES - CIRCLIP
PREN 4833 : DRAFT 2017 AEROSPACE SERIES - PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING LOCKED FITTING - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
MS27395 Revision D:2014 ELBOW, FLARELESS, TUBE TO HOSE - 45 DEGREES SWIVEL NUT
MS27084 Revision D:2014 ELBOW, NIPPLE END, SWIVEL FLANGE TO HOSE - 45 DEGREES
MIL-DTL-83798-1 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight
MIL-DTL-28840-13 Revision F:2013 CONNECTORS, ACCESSORIES, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, PROTECTIVE COVER, RECEPTACLE
MIL-DTL-83513-20 Revision D:2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
MIL-DTL-55302-91 Revision F:2010 CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, STRAIGHT-THRU, HERMAPHRODITIC CONTACTS (.100 INCH SPACING)
MIL-DTL-28840-27 Revision D:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, 45 DEGREES, METAL CONDUIT FOR EMI SHIELDING
MIL-DTL-83798-3 Revision D:2017 Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees
SAE AMS5354F Steel, Corrosion and Heat Resistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered to 32 – 38 HRC
MIL-DTL-28840-6 Revision E:2013 CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, BACKSHELL, STRAIGHT, CABLE SEALING AND SHIELD TERMINATION
MIL-DTL-12883-51 Revision B:2003 SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, BRACKET AND SOCKET ASSEMBLY FOR RELAYS, 4-POLE, 10 AMPERES (MIL-PRF-6106, MIL-PRF-83536, AND MIL-PRF-83726)
PREN 4836 : DRAFT 2017 AEROSPACE SERIES - ADAPTOR, PIPE COUPLING 24 DEGREES CONE UP TO 35000 KPA (5080 PSI) RING-LOCKED FITTING REDUCER - FLARELESS END - INCH SERIES - EXTRA FINE THREAD PITCH
MIL-DTL-28754-40 Revision C:2015 Connectors, Electrical, Modular, Type IV, Connector Assembly, Screw
SAE MA3375C Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
SAE AS81703A Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting
SAE AS83819 Bearings, Plain, Self-Aligning, Self-Lubricating, 1400 cpm (15 fpm), Oscillation, -65 to +160 °F (-54 to +71 °C)
MIL-STD-1568 Revision D:2015 Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems
SAE AMS5353E Steel, Corrosion-Resistant, Investment Castings 16Cr - 1.8Ni - 0.08N As Cast
SAE AS 5887 : 2014 INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR
SAE AS5420G Hose Assembly, Heated, 125 psig, Lined Silicone, Potable Water, Procurement Specification
DSCC 89065 : C GENERAL SPECIFICATION FOR HIGH PERFORMANCE, HIGH DENSITY, TWO PIECE, PRINTED CIRCUIT BOARD CONNECTOR
DSCC 85033 : H HOLDER, ELECTRICAL CARD, METAL CARD GUIDE, ZERO INSERTION FORCE
PREN 6105 : 200P1 AEROSPACE SERIES - STUD WITH SHOULDER
PREN 6131 : 200P3 AEROSPACE SERIES - COMPOSITE CLIP NUT, SELF LOCKING
DSCC 83023 : L RETAINER-EJECTOR, ELECTRICAL CARD, PLASTIC
DSCC 89024 : E HOLDER, ELECTRICAL CARD, WEDGE RETAINER, 5-PIECE, .250 INCH BY .260 INCH BODY SIZE

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.