SAE J1113/1_201310
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR COMPONENTS OF VEHICLES, BOATS (UP TO 15 M), AND MACHINES (EXCEPT AIRCRAFT) (16.6 HZ TO 18 GHZ)
Available format(s)
Hardcopy , PDF
Superseded date
03-01-2016
Superseded by
Language(s)
English
Published date
01-01-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
FOREWORD
1. SCOPE
2. REFERENCES
3. DEFINITIONS
4. OVERVIEW OF TEST METHODS
5. STANDARD EMISSIONS TEST REQUIREMENTS AND CONDITIONS
6. STANDARD IMMUNITY TEST PROCEDURE
7. NOTES
APPENDIX A - FUNCTION PERFORMANCE STATUS CLASSIFICATION
(BASED ON SAE J1812) (INFORMATIVE)
APPENDIX B - CONSTANT PEAK TEST LEVEL (BASED ON ISO
11452-1) (INFORMATIVE)
APPENDIX C - SETTING IMMUNITY TEST FREQUENCIES IN
A LOGARITHMIC SEQUENCE (INFORMATIVE)
APPENDIX D - EXAMPLE COMPONENT EMC TEST PLAN (INFORMATIVE)
Presents the measurement of voltage transient immunity and within the applicable frequency ranges, audio (AF) and radio frequency (RF) immunity, and conducted and radiated emissions.
| DocumentType |
Revision
|
| Pages |
37
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE J1812_201306 | FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING |
| SAE J1113/27_201710 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS PROCEDURE FOR VEHICLE COMPONENTS - PART 27: IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - MODE STIR REVERBERATION METHOD |
| SAE J 2657 : 2004 | TIRE PRESSURE MONITORING SYSTEMS FOR LIGHT DUTY HIGHWAY VEHICLES |
| SAE J1113/21_201305 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 21: IMMUNITY TO ELECTROMAGNETIC FIELDS, 30 MHZ TO 18 GHZ, ABSORBER-LINED CHAMBER |
| SAE J 1113/13 : 2015 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 13: IMMUNITY TO ELECTROSTATIC DISCHARGE |
| SAE J1752/1_201605 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES FOR INTEGRATED CIRCUITS - INTEGRATED CIRCUIT EMC MEASUREMENT PROCEDURES - GENERAL AND DEFINITIONS |
| SAE J2282_201102 | DISTRIBUTED LIGHTING SYSTEMS (DLS) |
| SAE J2628_201307 | CHARACTERIZATION, CONDUCTED IMMUNITY |
| SAE J1113/26_201404 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO AC POWER LINE ELECTRIC FIELDS |
| SAE J1113/2_201008 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR VEHICLES COMPONENTS (EXCEPT AIRCRAFT) - CONDUCTED IMMUNITY, 15 HZ TO 250 KHZ - ALL LEADS |
| IEEE/ANSI C63.15-2010 | American National Standard Recommended Practice for the Immunity Measurement of Electrical and Electronic Equipment |
| SAE J1113/11_201706 | IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS |
| SAE J2357_201211 | APPLICATION GUIDELINES FOR ELECTRONICALLY DRIVEN AND/OR CONTROLLED EXTERIOR AUTOMOTIVE LIGHTING EQUIPMENT |
| SAE J 1113 : 2006 | ELECTROMAGNETIC SUSCEPTIBILITY MEASUREMENT PROCEDURES FOR VEHICLE COMPONENTS (EXCEPT AIRCRAFT) |
| SAE J1113/22_201008 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 22: IMMUNITY TO RADIATED MAGNETIC FIELDS |
| SAE J1113/25_199902 | Electromagnetic Compatibility Measurement Procedure for Vehicle Components—Immunity to Radiated Electromagnetic Fields, 10 KHz to 1000 MHz—Tri-Plate Line Method |
| SAE J 2891 : 2015 | AUXILIARY POWER UNIT ELECTRICAL INTERFACE REQUIREMENTS FOR CLASS EIGHT TRUCKS |
| SAE J1455_201703 | RECOMMENDED ENVIRONMENTAL PRACTICES FOR ELECTRONIC EQUIPMENT DESIGN IN HEAVY-DUTY VEHICLE APPLICATIONS |
| SAE J1113/4_201404 | IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD |
| IEEE 1609.0-2013 | IEEE Guide for Wireless Access in Vehicular Environments (WAVE) - Architecture |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| SAE J 1113/28 : 2004 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS PROCEDURE FOR VEHICLE COMPONENTS - PART 28 - IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - REVERBERATION METHOD (MODE TUNING) |
| ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 11452-10:2009 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 10: Immunity to conducted disturbances in the extended audio frequency range |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| SAE J 1113/13 : 2015 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 13: IMMUNITY TO ELECTROSTATIC DISCHARGE |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| SAE J1113/12_200608 | ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES |
| ISO 10605:2008 | Road vehicles — Test methods for electrical disturbances from electrostatic discharge |
| SAE J1113/21_201305 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 21: IMMUNITY TO ELECTROMAGNETIC FIELDS, 30 MHZ TO 18 GHZ, ABSORBER-LINED CHAMBER |
| SAE J1113/27_201206 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENTS PROCEDURE FOR VEHICLE COMPONENTS - PART 27: IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - MODE STIR REVERBERATION METHOD |
| SAE J1113/4_201404 | IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS - BULK CURRENT INJECTION (BCI) METHOD |
| SAE J1113/11_201201 | IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS |
| SAE J1113/42_201012 | ELECTROMAGNETIC COMPATIBILITY - COMPONENT TEST PROCEDURE - PART 42: CONDUCTED TRANSIENT EMISSIONS |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| SAE J1113/41_200609 | LIMITS AND METHODS OF MEASUREMENT OF RADIO DISTURBANCE CHARACTERISTICS OF COMPONENTS AND MODULES FOR THE PROTECTION OF RECEIVERS IN BOARD VEHICLES |
| CISPR 25:2016 | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers |
| ISO/TR 10305:1992 | Road vehicles Generation of standard EM field for calibration of power density meters from 20 kHz to 1 000 MHz |
| IEEE/ANSI C63.14-2014 REDLINE | American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3) |
| SAE J1812_201306 | FUNCTION PERFORMANCE STATUS CLASSIFICATION FOR EMC IMMUNITY TESTING |
| IEEE C63.2-2009 | American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications |
| SAE J1113/26_201404 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - IMMUNITY TO AC POWER LINE ELECTRIC FIELDS |
| SAE HS 3600 : 2008 | |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| IEEE C95.1-2005 | IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz |
| SAE J1113/22_201008 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURE FOR VEHICLE COMPONENTS - PART 22: IMMUNITY TO RADIATED MAGNETIC FIELDS |
| ANSI C63.5 : 2006 | ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ) |
| IEC 60050-726:1982 | International Electrotechnical Vocabulary (IEV) - Part 726: Transmission lines and waveguides |
| ISO 11452-9:2012 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 9: Portable transmitters |
| SAE J1113/24_200610 | IMMUNITY TO RADIATED ELECTROMAGNETIC FIELDS; 10 KHZ TO 200 MHZ - CRAWFORD TEM CELL AND 10 KHZ TO 5 GHZ - WIDEBAND TEM CELLL |
| ISO 11452-8:2015 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 8: Immunity to magnetic fields |
| IEEE/ANSI C63.16-1993 | American National Standard Guide for Electrostatic Discharge Test Methodologies and Criteria for Electronic Equipment |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| SAE J1113/2_201008 | ELECTROMAGNETIC COMPATIBILITY MEASUREMENT PROCEDURES AND LIMITS FOR VEHICLES COMPONENTS (EXCEPT AIRCRAFT) - CONDUCTED IMMUNITY, 15 HZ TO 250 KHZ - ALL LEADS |
| ISO 11452-11:2010 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 11: Reverberation chamber |
| IEEE 211-1997 | IEEE Standard Definitions of Terms for Radio Wave Propagation |
| ISO 11452-7:2003 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 7: Direct radio frequency (RF) power injection |
| SAE J1113/3_201008 | CONDUCTED IMMUNITY, 250 KHZ TO 400 MHZ, DIRECT INJECTION OF RADIO FREQUENCY (RF) POWER |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.