|
ISO 4793:1980
|
Laboratory sintered (fritted) filters — Porosity grading, classification and designation |
|
ISO 3016:1994
|
Petroleum products Determination of pour point |
|
ISO 2719:2016
|
Determination of flash point Pensky-Martens closed cup method |
|
EN 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
|
IEC 62021-1:2003
|
Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
|
IEC 62021-2:2007
|
Insulating liquids - Determination of acidity - Part 2: Colourimetric titration |
|
IEC 61125:1992
|
Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability |
|
ISO 3675:1998
|
Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
|
EN ISO 3104:1996
|
Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
|
IEC 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
|
BS 6522:1984
|
Methods for determination of percentage water saturation of insulating oil |
|
EN 61125:1993/A1:2004
|
UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY |
|
IEC 60599:2015
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
|
EN 14210 : 2003
|
SURFACE ACTIVE AGENTS - DETERMINATION OF INTERFACIAL TENSION OF SOLUTIONS OF SURFACE ACTIVE AGENTS BY THE STIRRUP OR RING METHOD |
|
EN 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
|
ISO 6247:1998
|
Petroleum products — Determination of foaming characteristics of lubricating oils |
|
IEC 62535:2008
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
|
IEC 60475:2011
|
Method of sampling insulating liquids |
|
IEC 60567:2011
|
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
|
EN ISO 3675:1998
|
Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
|
EN 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
|
EN 62021-2 : 2007
|
INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
|
EN 62535:2009
|
Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
|
ASTM D 1275 : 2015
|
Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
|
EN 60970:2007/corrigendum:2008
|
INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
|
EN 62697-1:2012
|
Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
|
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
|
ISO 12185:1996
|
Crude petroleum and petroleum products Determination of density Oscillating U-tube method |
|
IEC 60970:2007
|
Insulating liquids - Methods for counting and sizing particles |
|
EN 60296:2012
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
|
IEC 62697-1:2012
|
Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
|
EN 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
|
IEC 60666:2010
|
Detection and determination of specified additives in mineral insulating oils |
|
IEC 60814:1997
|
Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
|
EN ISO 2719:2016
|
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
|
IEC 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
|
ISO 2049:1996
|
Petroleum products Determination of colour (ASTM scale) |
|
IEC 61619:1997
|
Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
|
IEC 61198:1993
|
Mineral insulating oils - Methods for the determination of 2-furfural and related compounds |
|
EN 62021-1:2003
|
Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
|
IEEE C57.106 : 2006
|
ACCEPTANCE AND MAINTENANCE OF INSULATING MINERAL OIL IN ELECTRICAL EQUIPMENT |
|
ISO 4407:2002
|
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
|
EN 60475 : 2011
|
Method of sampling insulating liquids |
|
ISO Guide 73:2009
|
Risk management — Vocabulary |
|
EN 60666 : 2010
|
DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS |