VDI 3823 Blatt 4:2006-11
Current
Current
The latest, up-to-date edition.
Vacuum coating quality assurance - Testing of vacuum coated plastics
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-11-2006
Publisher
€80.75
Excluding VAT
Preliminary note
1 Scope
2 Testing plans
3 Testing procedures
Bibliography
In this guideline the methods of testing vacuum coated plastic parts that have become established practice for manufacturers and users will be presented.
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 3823 Blatt 3:2006-11 | Vacuum coating quality assurance - Production sequence and job steps |
| VDI 3823 Blatt 2:2006-11 | Vacuum coating quality assurance - Demands on plastics to be coated |
| VDI 3823 Blatt 1:2006-11 | Vacuum coating quality assurance - Characteristics, applications and procedures |
| VDI 2840:2005-11 | Carbon films - Basic knowledge, coating types and properties |
| DIN 50021:1988-06 | SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
| DIN EN ISO 3231:1998-02 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| VDI 3823 Blatt 3:2006-11 | Vacuum coating quality assurance - Production sequence and job steps |
| DIN 5033-1:2009-05 | COLORIMETRY - PART 1: BASIC TERMS OF COLORIMETRY |
| MIL-STD-285 Base Document:1956 | ATTENUATION MEASUREMENTS FOR ENCLOSURES, ELECTROMAGNETIC SHIELDING, FOR ELECTRONIC TEST PURPOSES, METHOD OF (S/S BY IEEE299) |
| ISO 10993-4:2017 | Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
| DIN ISO 9022-2:2015-06 | Optics and photonics - Environmental test methods - Part 2: Cold, heat and humidity (ISO 9022-2:2015) |
| EN ISO 15106-3:2005 | Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003) |
| EN ISO 10993-5:2009 | Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) |
| DIN 5033-4:1992-07 | COLORIMETRY; SPECTROPHOTOMETRIC METHOD |
| EN ISO 1463:2004 | Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003) |
| ASTM D 2463 : 2015 : REDLINE | Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| ISO 9220:1988 | Metallic coatings — Measurement of coating thickness — Scanning electron microscope method |
| EN ISO 2360:2017 | Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
| ISO 9022-2:2015 | Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity |
| DIN EN ISO 3497:2001-12 | METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
| ASTM D 4541 : 2017 : REDLINE | Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
| ISO 9211-4:2012 | Optics and photonics — Optical coatings — Part 4: Specific test methods |
| ISO 3543:2000 | Metallic and non-metallic coatings — Measurement of thickness — Beta backscatter method |
| EN ISO 3497:2000 | Metallic coatings - Measurement of coating thickness - X-ray spectrometric methods (ISO 3497:2000) |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| ISO 14676:1997 | Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method |
| ISO 4578:1997 | Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
| ISO 1463:2003 | Metallic and oxide coatings — Measurement of coating thickness — Microscopical method |
| ISO 14155-1:2003 | Clinical investigation of medical devices for human subjects — Part 1: General requirements |
| ISO 3882:2003 | Metallic and other inorganic coatings — Review of methods of measurement of thickness |
| DIN EN ISO 2360:2016-05 (Draft) | NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
| EN ISO 10993-10:2013 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| EN ISO 10993-4:2017 | Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) |
| VDI 3823 Blatt 1:2006-11 | Vacuum coating quality assurance - Characteristics, applications and procedures |
| DIN 5033-5:1981-01 | COLORIMETRY BY VISUAL MATCHING |
| DIN 53754:1977-06 | TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD |
| EN ISO 9220:1994 | Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) |
| EN ISO 3882:2003 | Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
| DIN 10050-9:1973-12 | TESTING OF BUTTER WRAPPERS; DETERMINATION OF TRANSMISSION |
| DIN EN ISO 2409:2013-06 | PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
| EN 1071-1:2003 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| DIN EN ISO 14155-1:2009-11 | CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - PART 1: GENERAL REQUIREMENTS |
| ISO 15106-3:2003 | Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method |
| DIN EN ISO 10993-5:2009-10 | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| DIN 53380-1:2000-07 | Determining the gas transmission rate of plastic film by the volumetric method |
| DIN 58196-6:1995-07 | OPTICAL COATINGS - PART 6: TESTING OF THE ADHESION WITH A TAPE (TAPE TEST) |
| ISO 10993-10:2010 | Biological evaluation of medical devices — Part 10: Tests for irritation and skin sensitization |
| DIN 52348:1985-02 | TESTING OF GLASS AND PLASTICS; ABRASION TEST; SAND TRICKLING METHOD |
| DIN 5033-6:1976-08 | COLORIMETRY; TRISTIMULUS METHOD |
| ISO 3497:2000 | Metallic coatings — Measurement of coating thickness — X-ray spectrometric methods |
| DIN EN ISO 10993-4:2016-02 (Draft) | BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD (ISO 10993-4:2017) |
| ASTM G 99 : 2017 : REDLINE | Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
| DIN 53380-3:1998-07 | Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings |
| ISO 10993-1:2009 | Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ASTM F 390 : 2011 : REDLINE | Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array |
| VDI 3823 Blatt 2:2006-11 | Vacuum coating quality assurance - Demands on plastics to be coated |
| DIN 53494:1984-05 | ELECTROPLATED COATINGS; TESTING OF ELECTROPLATED PLASTIC ARTICLES; DETERMINATION OF PEEL STRENGTH |
| DIN EN ISO 10993-10:2014-10 | Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| DIN EN ISO 15106-3:2005-05 | PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 3: ELECTROLYTIC DETECTION SENSOR METHOD |
| ISO 6719:2010 | Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
| DIN 50431:1988-05 | TESTING OF SEMICONDUCTOR MATERIALS; MEASUREMENT OF THE RESISTIVITY OF SILICON OR GERMANIUM SINGLE CRYSTALS BY MEANS OF THE FOUR PROBE DIRECT CURRENT METHOD WITH CO-LINEAR ARRAY |
| DIN 50933:2015-08 | MEASUREMENT OF COATING THICKNESSES - MEASUREMENT OF THE THICKNESS OF COATINGS BY DIFFERENCE MEASUREMENT USING A STYLUS INSTRUMENT |
| DIN 58196-5:1995-07 | OPTICAL COATINGS - PART 5: TESTING OF THE ABRASION RESISTANCE WITH CLOTH |
| DIN 58196-1:1996-07 | OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER |
| ISO 2409:2013 | Paints and varnishes — Cross-cut test |
| DIN 52347:1987-12 | TESTING OF GLASS AND PLASTICS; ABRASION TEST; METHOD USING ABRASION WHEELS AND MEASUREMENT OF SCATTERED LIGHT |
| EN ISO 14155-1:2009 | Clinical investigation of medical devices for human subjects - Part 1: General requirements (ISO 14155-1:2003) |
| ISO 10110-7:2017 | Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
| DIN ISO 10110-7:2016-05 (Draft) | OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
| IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.