![header thumbnail](/images/publishers\vdi_cover.gif)
VDI/VDE 2616 Blatt 2:2014-07
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\vdi_cover.gif)
Hardness testing of plastics and elastomers
Hardcopy , PDF
German - English
01-07-2014
Preliminary note
Introduction
1 Scope
2 Terms and definitions
3 General principles
4 Principle of hardness testing
5 Hardness test methods for plastics
and elastomers
6 Selection of a hardness test method
7 Factors influencing the results
of hardness testing
8 Hardness ranges
9 Conversion of hardness test
results
10 Test piece preparation
11 Calibration of hardness testing
instruments
12 Description of the individual
test methods
13 Overviews of hardness test
methods, hardness ranges and
handling of test pieces
14 Overview of material groups
and test methods
15 Measurement uncertainty
Bibliograpy
The guideline describes hardness testing methods for plastics and elastomers.
DocumentType |
Standard
|
Pages |
101
|
PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
Status |
Current
|
Supersedes |
VDI 3396:2017-04 | Belt grinding for metal working |
ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
PREN 59 : DRAFT 2014 | GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
ISO 7619-1:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
EN ISO 14577-3:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
DIN EN ISO 6507-1:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
EN ISO 14530-2 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 8307:2008-03 | FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
DIN ISO 18898:2016-09 (Draft) | RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS (ISO 18898:2016) |
ISO 4545-2:2005 | Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines |
EN ISO 1043-1:2011/A1:2016 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
DIN 272:1986-02 | TESTING OF MAGNESIA FLOOR SCREEDS |
ISO 8307:2007 | Flexible cellular polymeric materials Determination of resilience by ball rebound |
ASTM E 2546 : 2015 : REDLINE | Standard Practice for Instrumented Indentation Testing |
EN ISO 1043-2:2011 | Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
DIN EN ISO 2815:2003-10 | PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST |
ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
DIN ISO 27588:2014-12 | RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
ISO 2039-1:2001 | Plastics Determination of hardness Part 1: Ball indentation method |
ISO 4545-1:2005 | Metallic materials Knoop hardness test Part 1: Test method |
EN ISO 14577-1:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
DIN EN 59:2016-06 | GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER |
DIN EN ISO 1043-1:2016-09 | PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
ISO 27588:2012 | Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
ISO 7267-3:2017 | Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
EN ISO 8307:2007 | Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007) |
DIN EN ISO 6508-2:2015-06 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
DIN ISO 48:2016-09 | Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
ISO 2039-2:1987 | Plastics Determination of hardness Part 2: Rockwell hardness |
EN ISO 1514:2016 | Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
ISO 14530-3:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 3: Requirements for selected moulding compounds |
VDI/VDE 2616 Blatt 1:2012-08 | Hardness testing of metallic materials |
EN ISO 14530-3 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
ISO 2435:1973 | Nitrogen for use in aircraft |
ISO 1522:2006 | Paints and varnishes — Pendulum damping test |
DIN EN ISO 4545-1:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD |
ASTM D 531 : 2015 : REDLINE | Standard Test Method for Rubber Property—Pusey and Jones Indentation |
EN ISO 2039-1 : 2003 | PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001) |
DIN EN ISO 1518-2:2012-01 | PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
EN 14598-2:2005/AC:2006 | REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
ISO 14577-1:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
ISO 2439:2008 | Flexible cellular polymeric materials Determination of hardness (indentation technique) |
ENV 13005 : DRAFT 1999 | GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
DIN EN ISO 2039-2:2000-01 | PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
DIN EN ISO 14577-1:2015-11 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
DIN EN ISO 6507-2:2016-08 (Draft) | METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
ISO 7619-2:2010 | Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
DIN EN ISO 6508-1:2016-12 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
EN ISO 2815:2003 | Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
ISO 1518-1:2011 | Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
DIN EN ISO 14577-3:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
ISO 14577-3:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
DIN EN ISO 1514:2005-02 | PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
ISO 18898:2016 | Rubber Calibration and verification of hardness testers |
EN ISO 14530-1 : 1999 | PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 1522:2007-04 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
DIN EN ISO 4545-2:2015-05 (Draft) | METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
ISO 14577-2:2015 | Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
ASTM D 1474 : 1998 | Standard Test Methods for Indentation Hardness of Organic Coatings |
EN ISO 2439:2008 | Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
EN ISO 1518-2:2011 | Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) |
DIN EN ISO 14577-2:2015-11 | METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN ISO 14577-2:2015 | Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
ISO 1043-2:2011 | Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN 14598-3:2005 | Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
EN ISO 2039-2 : 1999 | PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS |
ISO 14530-2:1999 | Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 1518-2:2011 | Paints and varnishes Determination of scratch resistance Part 2: Variable-loading method |
EN ISO 1522:2006 | Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
ISO 7267-1:2017 | Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
EN ISO 6508-2:2015 | Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.