Skip to content
Please enter a keyword to search

  • EN ISO 14021:2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) (ISO 14021:2016)

    Available format(s): 

    Superseded date:  06-08-2021

    Language(s): 

    Published date:  13-04-2016

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    European foreword
    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Objective of self-declared environmental claims
    5 Requirements applying to all self-declared
      environmental claims
    6 Evaluation and claim verification requirements
    7 Specific requirements for selected claims
    Annex A (informative) - Simplified diagrammatic representation
            of a recycling system
    Bibliography

    Abstract - (Show below) - (Hide below)

    ISO 14021:2016 specifies requirements for self-declared environmental claims, including statements, symbols and graphics, regarding products. It further describes selected terms commonly used in environmental claims and gives qualifications for their use. This International Standard also describes a general evaluation and verification methodology for self-declared environmental claims and specific evaluation and verification methods for the selected claims in this International Standard.ISO 14021:2016 does not preclude, override, or in any way change, legally required environmental information, claims or labelling, or any other applicable legal requirements.

    General Product Information - (Show below) - (Hide below)

    Committee CEN/BT
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    DIN EN 16125:2016-03 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    15/30328778 DC : 0 BS EN 13251 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES
    BS EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
    15/30328787 DC : 0 BS EN 13265 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS
    BS EN 16935:2017 Bio-based products. Requirements for Business-to-Consumer communication and claims
    PREN 12493 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    15/30328784 DC : 0 BS EN 13257 - GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS
    UNI CEN/TS 16524 : 2013 MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT
    UNI CEN/TS 16398 : 2013 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    PREN 1442 : DRAFT 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    PREN 50598-3 : DRAFT 2013 ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
    PD CEN/TR 17004:2016 Mechanical products. Conditions to set up environmental communication models by recognizing sectorial particularities
    PD CEN/TS 16822:2015 Textiles and textile products. Self-declared environmental claims. Use of the terms
    15/30328781 DC : 0 BS EN 13256 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
    PD CEN/TS 16524:2013 Mechanical products. Methodology for reduction of environmental impacts in product design and development
    DIN EN 16311:2013-05 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
    DIN EN 16848 E : 2017 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    12/30250279 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    PREN 14140 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    I.S. EN 16575:2014 BIO-BASED PRODUCTS - VOCABULARY
    UNE-EN 16575:2015 Bio-based products - Vocabulary
    PREN 16848 : DRAFT 2015 BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET
    I.S. EN 12493:2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
    16/30334287 DC : 0 BS EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURE UP TO 100 BAR
    UNE-EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
    UNI CEN/TR 15822 : 2010 PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES
    NF EN 12542 : 2011 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    BS EN 14471 : 2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    DIN EN 14893:2014-09 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    BS EN 13253:2016 Geotextiles and geotextile-related products. Characteristics required for use in erosion control works (coastal protection, bank revetments)
    UNE-EN 13257:2017 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
    I.S. EN 14912:2015 LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS
    EN 13255:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
    CEN/TS 16295:2012 Plastics - Declaration of the bio-based carbon content
    EN 13265:2016 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
    CEN/TR 581-4:2005 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
    EN 13250:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of railways
    CEN/TR 15822:2009 Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues
    CEN/TR 16227:2011 Liquid petroleum products - Bio-lubricants - Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
    CEN/TS 16765:2015 LPG equipment and accessories - Environmental considerations for CEN/TC 286 standards
    EN 13257:2016 Geotextiles and geotextile-related products - Characteristics required for use in solid waste disposals
    EN 13249:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
    CEN/TS 16398:2012 Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet
    EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
    EN 13254:2016 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
    EN 13256:2016 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
    DIN EN 16119:2013-05 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
    05/30097505 DC : 0 PREN 15343 - PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
    DIN EN 14678-3:2013-03 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
    UNI EN 15343 : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
    BS EN 16311:2013 Engineering services. Terminology to describe engineering services for industrial products
    UNE-EN 16935:2017 Bio-based products - Requirements for Business-to-Consumer communication and claims
    13/30248693 DC : 0 BS EN 14893 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    15/30323537 DC : 0 BS EN 16887 - LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
    14/30300966 DC : 0 BS EN 1442 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    15/30328790 DC : 0 BS EN 13249 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
    BS EN 16575:2014 Bio-based products. Vocabulary
    13/30277801 DC : 0 BS EN 16575 - BIO-BASED PRODUCTS - VOCABULARY
    PD CEN/TS 16398:2012 Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet
    DIN EN 16575 E : 2014 BIO-BASED PRODUCTS - VOCABULARY
    BS EN 14678-3:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Refuelling installations at commercial and industrial premises
    UNI EN 16119 : 2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
    DIN EN 16887:2015-07 (Draft) LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
    11/30250549 DC : 0 BS EN 14471 - CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    I.S. EN 16652-1:2016 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
    DIN EN 14893 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    S.R. CEN/TS 16524:2013 MECHANICAL PRODUCTS - METHODOLOGY FOR REDUCTION OF ENVIRONMENTAL IMPACTS IN PRODUCT DESIGN AND DEVELOPMENT
    I.S. EN 16125:2015 LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
    EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications - Part 1: General safety requirements and test methods
    UNE-CEN/TR 15822:2011 IN Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues
    UNE-EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
    I.S. EN 16887:2017 LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
    S.R. CEN/TS 16765:2015 LPG EQUIPMENT AND ACCESSORIES - ENVIRONMENTAL CONSIDERATIONS FOR CEN/TC 286 STANDARDS
    PREN 14471 : DRAFT 2011 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    PREN 13256 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
    UNE-EN 14071:2015 LPG equipment and accessories - Pressure relief valves for LPG pressure vessels - Ancillary equipment
    BS EN 14071:2015 LPG equipment and accessories. Pressure relief valves for LPG pressure vessels. Ancillary equipment
    DIN EN 12252:2014-07 LPG equipment and accessories - Equipping of LPG road tankers
    DIN EN 15343:2008-02 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
    DIN EN 14427:2014-09 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    DIN EN 14570:2014-07 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
    DIN EN 14471:2015-03 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    DIN EN 14912:2015-05 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
    BS EN 14912:2015 LPG equipment and accessories. Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
    UNE-EN 13253:2017 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
    UNE-EN 12542:2011 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
    DIN EN 15343 E : 2008 PLASTICS - RECYCLED PLASTICS - PLASTICS RECYCLING TRACEABILITY AND ASSESSMENT OF CONFORMITY AND RECYCLED CONTENT
    I.S. EN 12542:2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    I.S. EN 14471:2013 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    I.S. EN 14678-1:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    I.S. EN 14570:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
    I.S. EN 13251:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES
    DIN EN 12542:2010-12 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    I.S. EN 13249:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
    I.S. EN 13256:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS -CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF TUNNELS AND UNDERGROUND STRUCTURES
    I.S. EN 14129:2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    I.S. EN 13265:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS
    I.S. EN 13252:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS
    I.S. EN 13255:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF CANALS
    I.S. EN 14140:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    I.S. EN 13250:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS
    DIN EN 13110:2017-05 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
    DIN EN 12252:2000-10 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    I.S. EN 13257:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS
    I.S. EN 13253:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS)
    I.S. EN 14893:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    I.S. EN 12252:2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    I.S. EN 13776:2013 LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
    I.S. EN 14427:2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    I.S. EN 13254:2016 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    DIN EN 12493:2017-01 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    UNI EN 12493 : 2014 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    PREN 13953 : DRAFT 2012 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
    DIN EN 16935:2015-12 (Draft) BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS
    CEI EN 50604-1 : 1ED 2017 SECONDARY LITHIUM BATTERIES FOR LIGHT EV (ELECTRIC VEHICLE) APPLICATIONS - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS
    13/30266592 DC : 0 BS EN 12493 - LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    15/30328775 DC : 0 BS EN 13250 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS
    BS EN 16887:2017 Leather. Environmental footprint. Product Category Rules (PCR). Carbon footprints
    12/30248681 DC : 0 BS EN 14140 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    PD CEN/TS 16765:2015 LPG equipment and accessories. Environmental considerations for CEN/TC 286 standards
    15/30328772 DC : 0 BS EN 13254 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    BS EN 16652-1:2016 LPG equipment and accessories. Automotive LPG vehicles workshops Working areas and procedures
    PREN 13252 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS
    PREN 13250 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF RAILWAYS
    BS EN 60601-1-10 : 2008 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS
    UNE-EN 16652-1:2016 LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
    DIN EN 16652-1:2016-09 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
    PREN 13257 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED DOCUMENTS - CHARACTERISTICS REQUIRED FOR USE IN SOLID WASTE DISPOSALS
    PREN 13253 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS)
    UNI EN 16311 : 2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
    I.S. EN 16935:2017 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS
    S.R. CEN/TS 16822:2015 TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS
    UNI EN 16575 : 2014 BIO-BASED PRODUCTS - VOCABULARY
    EN 60601-1-10:2008/A1:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-10: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR THE DEVELOPMENT OF PHYSIOLOGIC CLOSED-LOOP CONTROLLERS (IEC 60601-1-10:2007)
    I.S. EN 13110:2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
    UNI CEN/TR 16227 : 2011 LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
    BS EN 16125:2015 LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
    UNI EN 14678-3 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
    PREN 12542 : DRAFT 2016 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    DIN EN 14912 E : 2015 LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS
    DIN EN 13110:2012-07 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
    DIN EN 14471 E : 2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    DIN EN 13776:2013-08 LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
    DIN EN 14140:2015-03 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    BS EN 14570:2014 LPG equipment and accessories. Equipping of overground and underground LPG vessels
    BS EN 13249:2016 Geotextiles and geotextile-related products. Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
    BS EN 12252:2014 LPG equipment and accessories. Equipping of LPG road tankers
    UNE-EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
    CEN/TS 16524:2013 Mechanical products - Methodology for reduction of environmental impacts in product design and development
    UNI EN 12542 : 2010 LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 MUE - DESIGN AND MANUFACTURE
    DIN EN 14427 E : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    UNE-EN 16125:2016 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    EN 12542:2010 LPG equipment and accessories - Static welded steel cylindrical tanks, serially produced for the storage of Liquefied Petroleum Gas (LPG) having a volume not greater than 13 m³ - Design and manufacture
    EN 16311:2013 Engineering services - Terminology to describe engineering services for industrial products
    EN 16652-1:2016 LPG equipment and accessories - Automotive LPG vehicles workshops - Part 1: Working areas and procedures
    EN 14678-1:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
    UNI EN 14570 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF OVERGROUND AND UNDERGROUND LPG VESSELS
    UNI EN 13776 : 2013 LPG EQUIPMENT AND ACCESSORIES - FILLING AND DISCHARGE PROCEDURES FOR LPG ROAD TANKERS
    UNI EN 14893 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    UNI EN 14427 : 2014 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE FULLY WRAPPED COMPOSITE CYLINDERS FOR LPG - DESIGN AND CONSTRUCTION
    UNI EN 14129 : 2014 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    UNI EN 14140 : 2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    UNI EN 14678-1 : 2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 1: DISPENSERS
    UNI EN 12252 : 2014 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    DIN EN 16652-1 E : 2016 LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
    14/30303607 DC : 0 BS EN ISO 19694-5 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 5: LIME INDUSTRY
    DIN EN 16935 E : 2017 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS-TO-CONSUMER COMMUNICATION AND CLAIMS
    13/30277471 DC : 0 BS EN 14912 - LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS
    13/30286129 DC : 0 BS EN 16652-1 - LPG EQUIPMENT AND ACCESSORIES - AUTOMOTIVE LPG VEHICLES WORKSHOPS - PART 1: WORKING AREAS AND PROCEDURES
    12/30265334 DC : 0 BS EN 13953 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR TRANSPORTABLE REFILLABLE CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG)
    UNE-EN 16848:2017 Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet
    12/30266928 DC : 0 BS EN 14071 - LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
    I.S. EN 50598-3:2015 ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS AND THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
    I.S. EN 16848:2016 BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    12/30258346 DC BS EN 16403. Waste management. Waste visual elements
    DIN EN 16887 E : 2017 LEATHER - ENVIRONMENTAL FOOTPRINT - PRODUCT CATEGORY RULES (PCR) - CARBON FOOTPRINTS
    13/30281067 DC : 0 BS EN 12252 - LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    15/30328796 DC : 0 BS EN 13253 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EROSION CONTROL WORKS (COASTAL PROTECTION, BANK REVETMENTS)
    13/30276940 DC : 0 BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
    15/30330831 DC : 0 BS EN 16935 - BIO-BASED PRODUCTS - B2C REPORTING AND COMMUNICATION - REQUIREMENTS FOR CLAIMS
    BS EN 50604-1:2016 Secondary lithium batteries for light EV (electric vehicle) applications General safety requirements and test methods
    PREN 13249 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN THE CONSTRUCTION OF ROADS AND OTHER TRAFFICKED AREAS (EXCLUDING RAILWAYS AND ASPHALT INCLUSION)
    PREN 13265 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN LIQUID WASTE CONTAINMENT PROJECTS
    I.S. EN 16311:2013 ENGINEERING SERVICES - TERMINOLOGY TO DESCRIBE ENGINEERING SERVICES FOR INDUSTRIAL PRODUCTS
    S.R. CEN/TR 17004:2016 MECHANICAL PRODUCTS - CONDITIONS TO SET UP ENVIRONMENTAL COMMUNICATION MODELS BY RECOGNIZING SECTORIAL PARTICULARITIES
    PREN 13254 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR THE USE IN THE CONSTRUCTION OF RESERVOIRS AND DAMS
    16/30326248 DC : 0 BS EN 12542 - LPG EQUIPMENT AND ACCESSORIES - STATIC WELDED STEEL CYLINDRICAL TANKS, SERIALLY PRODUCED FOR THE STORAGE OF LIQUEFIED PETROLEUM GAS (LPG) HAVING A VOLUME NOT GREATER THAN 13 M[3] - DESIGN AND MANUFACTURE
    DIN EN 12493:2014-03 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    DIN EN 14071:2015-08 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
    PREN 14893 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE LIQUEFIED PETROLEUM GAS (LPG) WELDED STEEL PRESSURE DRUMS WITH A CAPACITY BETWEEN 150 LITRES AND 1000 LITRES
    I.S. CEN TR 581-4:2006 OUTDOOR FURNITURE - SEATING AND TABLES FOR CAMPING, DOMESTIC AND CONTRACT USE - PART 4: REQUIREMENTS AND TEST METHODS FOR DURABILITY UNDER THE INFLUENCE OF CLIMATIC CONDITIONS
    DIN EN 14129:2014-05 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS
    UNE-EN 14140:2015 LPG equipment and accessories - Transportable refillable welded steel cylinders for LPG - Alternative design and construction
    BS EN 14129:2014 LPG Equipment and accessories. Pressure relief valves for LPG pressure vessels
    BS EN 12542:2010 LPG equipment and accessories. Static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) having a volume not greater than 13 m3. Design and manufacture
    BS EN 13255:2016 Geotextiles and geotextile-related products. Characteristics required for use in the construction of canals
    BS EN 14140:2014 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Alternative design and construction
    BS EN 13252:2016 Geotextiles and geotextile-related products. Characteristics required for use in drainage systems
    BS EN 14427:2014 LPG equipment and accessories. Transportable refillable fully wrapped composite cylinders for LPG. Design and construction
    UNE-EN 13252:2017 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
    BS EN 13257:2016 Geotextiles and geotextile-related products. Characteristics required for use in solid waste disposals
    UNE-EN 13254:2017 Geotextiles and geotextile-related products - Characteristics required for the use in the construction of reservoirs and dams
    UNE-EN 13255:2017 Geotextiles and geotextile-related products - Characteristics required for use in the construction of canals
    UNE-EN 13265:2017 Geotextiles and geotextile-related products - Characteristics required for use in liquid waste containment projects
    BS EN 13265:2016 Geotextiles and geotextile-related products. Characteristics required for use in liquid waste containment projects
    UNE-EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    BS EN 13256:2016 Geotextiles and geotextile-related products. Characteristics required for use in the construction of tunnels and underground structures
    UNE-EN 13110:2012 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
    BS EN 13254:2016 Geotextiles and geotextile-related products. Characteristics required for the use in the construction of reservoirs and dams
    UNE-EN 13776:2013 LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
    UNE-EN 13256:2017 Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures
    UNE-EN 14912:2015 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
    UNE-EN 13251:2017 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
    UNE-EN 13110:2012+A1:2017 LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
    EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    EN 16887:2017 Leather - Environmental footprint - Product Category Rules (PCR) - Carbon footprints
    EN 15343:2007 Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content
    EN 14427:2014 LPG equipment and accessories - Transportable refillable fully wrapped composite cylinders for LPG - Design and construction
    EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    EN 14912:2015 LPG equipment and accessories - Inspection and maintenance of LPG cylinder valves at time of periodic inspection of cylinders
    EN 16125:2015 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
    EN 16935:2017 Bio-based products - Requirements for Business-to-Consumer communication and claims
    EN 13253:2016 Geotextiles and geotextile-related products - Characteristics required for use in erosion control works (coastal protection, bank revetments)
    EN 14129:2014 LPG Equipment and accessories - Pressure relief valves for LPG pressure vessels
    EN 16575:2014 Bio-based products - Vocabulary
    EN 14140:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    EN 14570:2014 LPG equipment and accessories - Equipping of overground and underground LPG vessels
    EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
    EN 13776:2013 LPG equipment and accessories - Filling and discharge procedures for LPG road tankers
    PREN 12252 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - EQUIPPING OF LPG ROAD TANKERS
    UNE-EN 14893:2014 LPG equipment and accessories - Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    PREN 14912 : DRAFT 2013 LPG EQUIPMENT AND ACCESSORIES - INSPECTION AND MAINTENANCE OF LPG CYLINDER VALVES AT TIME OF PERIODIC INSPECTION OF CYLINDERS
    BS EN 12493 : 2013 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    BS EN 16119:2013 LPG equipment and accessories. Sealing caps and plugs for LPG cylinder and pressure vessel valves. Specification and testing
    DIN EN 16575:2014-10 BIO-BASED PRODUCTS - VOCABULARY
    13/30280190 DC : 0 BS EN 50598-3 - ECODESIGN FOR POWER DRIVE SYSTEMS, MOTOR STARTERS, POWER ELECTRONICS & THEIR DRIVEN APPLICATIONS - PART 3: QUANTITATIVE ECO DESIGN APPROACH THROUGH LIFE CYCLE ASSESSMENT INCLUDING PRODUCT CATEGORY RULES AND THE CONTENT OF ENVIRONMENTAL DECLARATIONS
    14/30312370 DC : 0 BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
    I.S. EN 16119:2013 LPG EQUIPMENT AND ACCESSORIES - SEALING CAPS AND PLUGS FOR LPG CYLINDER AND PRESSURE VESSEL VALVES - SPECIFICATION AND TESTING
    15/30328769 DC : 0 BS EN 13252 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN DRAINAGE SYSTEMS
    S.R. CEN/TS 16295:2012 PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT
    UNE-EN 14678-3:2013 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 3: Refuelling installations at commercial and industrial premises
    PREN 13251 : DRAFT 2015 GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - CHARACTERISTICS REQUIRED FOR USE IN EARTHWORKS, FOUNDATIONS AND RETAINING STRUCTURES
    11/30240152 DC : 0 BS ISO 18601 - PACKAGING AND THE ENVIRONMENT - GENERAL REQUIREMENTS FOR THE USE OF ISO STANDARDS IN THE FIELD OF PACKAGING AND THE ENVIRONMENT
    PD CEN/TR 16227:2011 Liquid petroleum products. Bio-lubricants. Recommendation for terminology and characterisation of bio-lubricants and bio-based lubricants
    CEN/TR 17004:2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities
    S.R. CEN/TS 16398:2012 PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET
    S.R. CEN TR 15822:2009 PLASTICS - BIODEGRADABLE PLASTICS IN OR ON SOIL - RECOVERY, DISPOSAL AND RELATED ENVIRONMENTAL ISSUES
    I.S. EN 14678-3:2013 LPG EQUIPMENT AND ACCESSORIES - CONSTRUCTION AND PERFORMANCE OF LPG EQUIPMENT FOR AUTOMOTIVE FILLING STATIONS - PART 3: REFUELLING INSTALLATIONS AT COMMERCIAL AND INDUSTRIAL PREMISES
    UNE-EN 12493:2014 LPG equipment and accessories - Welded steel pressure vessels for LPG road tankers - Design and manufacture
    UNI CEN/TS 16295 : 2012 PLASTICS - DECLARATION OF THE BIO-BASED CARBON CONTENT
    15/30317877 DC : 0 BS EN 16848 - BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET
    17/30353403 DC : 0 BS EN 17097 - GEOSYNTHETICS - CHARACTERISTICS REQUIRED FOR USE IN SURFACE EROSION CONTROL ON SLOPES AND BANKS
    EN 12493:2013+A1:2014/AC:2015 LPG EQUIPMENT AND ACCESSORIES - WELDED STEEL PRESSURE VESSELS FOR LPG ROAD TANKERS - DESIGN AND MANUFACTURE
    DIN EN 16848:2015-04 (Draft) BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET
    S.R. CEN/TR 16227:2011 LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - RECOMMENDATION FOR TERMINOLOGY AND CHARACTERISATION OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS
    I.S. EN 14071:2015 LPG EQUIPMENT AND ACCESSORIES - PRESSURE RELIEF VALVES FOR LPG PRESSURE VESSELS - ANCILLARY EQUIPMENT
    DIN EN 14678-1:2013-06 LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
    BS EN 15343:2007 Plastics. Recycled plastics. Plastics recycling traceability and assessment of conformity and recycled content
    BS EN 14678-1:2013 LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations Dispensers
    BS EN 13250:2016 Geotextiles and geotextile-related products. Characteristics required for use in the construction of railways
    BS EN 13251:2016 Geotextiles and geotextile-related products. Characteristics required for use in earthworks, foundations and retaining structures
    BS EN 14893:2014 LPG equipment and accessories. Transportable Liquefied Petroleum Gas (LPG) welded steel pressure drums with a capacity between 150 litres and 1 000 litres
    UNE-EN 13249:2017 Geotextiles and geotextile-related products - Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion)
    BS EN 13776:2013 LPG equipment and accessories. Filling and discharge procedures for LPG road tankers
    BS EN 13110 : 2012 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED ALUMINIUM CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - DESIGN AND CONSTRUCTION
    EN 13252:2016 Geotextiles and geotextile-related products - Characteristics required for use in drainage systems
    CEN/TS 16822 : 2015 TEXTILES AND TEXTILE PRODUCTS - SELF-DECLARED ENVIRONMENTAL CLAIMS - USE OF THE TERMS
    EN 12252:2014 LPG equipment and accessories - Equipping of LPG road tankers
    EN 16119:2013 LPG equipment and accessories - Sealing caps and plugs for LPG cylinder and pressure vessel valves - Specification and testing
    EN 13251:2016 Geotextiles and geotextile-related products - Characteristics required for use in earthworks, foundations and retaining structures
    EN 50598-3:2015 Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Part 3: Quantitative eco design approach through life cycle assessment including product category rules and the content of environmental declarations
    DIN EN 14140:2017-01 LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LPG - ALTERNATIVE DESIGN AND CONSTRUCTION
    UNE-EN 16125:2020 LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 14853:2016 Plastics Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system Method by measurement of biogas production
    IEC 60661:1999+AMD1:2003+AMD2:2005 CSV Methods for measuring the performance of electric household coffee makers
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ASTM D 5512 : 1996 Standard Practice for Exposing Plastics to a Simulated Compost Environment Using an Externally Heated Reactor (Withdrawn 2002)
    IEC 61121:2012 Tumble dryers for household use - Methods for measuring the performance
    IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
    IEC 60350:1999+AMD1:2005+AMD2:2008 CSV Electric cooking ranges, hobs, ovens and grills for household use - Methods for measuring performance
    ISO/TR 14049:2012 Environmental management Life cycle assessment Illustrative examples on how to apply ISO 14044 to goal and scope definition and inventory analysis
    ISO 9439:1999 Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test
    ISO/TS 14067:2013 Greenhouse gases Carbon footprint of products Requirements and guidelines for quantification and communication
    ASTM D 5208 : 2014 : REDLINE Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
    ISO 5151:2017 Non-ducted air conditioners and heat pumps — Testing and rating for performance
    ASTM D 5271 : 2002 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System (Withdrawn 2011)
    ISO 11469:2016 Plastics — Generic identification and marking of plastics products
    ISO/IEC Guide 14:2003 Purchase information on goods and services intended for consumers
    DIN V 54900-3:1998-09 TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 3: TESTING UNDER PRACTICE-RELEVANT CONDITIONS AND TESTING OF QUALITY OF THE COMPOSTS
    ASTM D 5525 : 1994 : REV A Standard Practice for Exposing Plastics to a Simulated Active Landfill Environment (Withdrawn 2002)
    ISO 9408:1999 Water quality — Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determination of oxygen demand in a closed respirometer
    IEC 60379:1987 Methods for measuring the performance of electric storage water-heaters for household purposes
    ASTM D 5509 : 1996 Standard Practice for Exposing Plastics to a Simulated Compost Environment (Withdrawn 2002)
    ASTM D 3826 : 1998 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
    IEC 60530:1975 Methods for measuring the performance of electric kettles and jugs for household and similar use
    ISO 5801:2017 Fans — Performance testing using standardized airways
    ASTM D 5247 : 1992 Standard Test Method for Determining the Aerobic Biodegradability of Degradable Plastics by Specific Microorganisms (Withdrawn 2004)
    ASTM D 5833 : 2012 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans
    ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines
    ISO 8561:1995 Household frost-free refrigerating appliances Refrigerators, refrigerator-freezers, frozen food storage cabinets and food freezers cooled by internal forced air circulation Characteristics and test methods
    ISO 9004:2009 Managing for the sustained success of an organization A quality management approach
    ISO 7827:2010 Water quality Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium Method by analysis of dissolved organic carbon (DOC)
    ASTM D 5209 : 1992 Standard Test Method for Determining the Aerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2004)
    ASTM D 5338 : 2015 : REDLINE Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
    ISO 14020:2000 Environmental labels and declarations — General principles
    ASTM D 5437 : 1993 Practice for Weathering of Plastics Under Marine Floating Exposure (Withdrawn 1999)
    ISO 13253:2017 Ducted air-conditioners and air-to-air heat pumps — Testing and rating for performance
    ASTM D 6003 : 1996 Standard Test Method for Determining Weight Loss From Plastic Materials Exposed to Simulated Municipal Solid-Waste (MSW) Aerobic Compost Environment (Withdrawn 2005)
    ANSI/ISO/ASQ E14001:2004 Quality Systems For Environmental Data And Technology Programs - Requirements With Guidance For Use
    DIN V 54900-2:1998-09 TESTING OF THE COMPOSTABILITY OF PLASTICS - PART 2: TESTING OF THE COMPLETE BIODEGRADABILITY OF PLASTICS IN LABORATORY TESTS
    BS 7500:1995 Specification for marking of recycled paper board
    ASTM D 5834 : 1995 Standard Guide for Source Reduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard (Cardboard) (Withdrawn 2004)
    ISO 10707:1994 Water quality Evaluation in an aqueous medium of the "ultimate" aerobic biodegradability of organic compounds Method by analysis of biochemical oxygen demand (closed bottle test)
    ISO 14025:2006 Environmental labels and declarations — Type III environmental declarations — Principles and procedures
    IEC 61429:1995 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    IEC 60675:1994+AMD1:1998 CSV Household electric direct-acting room heaters - Methods for measuring performance
    IEC 60531:1999 Household electric thermal storage room heaters - Methods for measuring performance
    ISO 14040:2006 Environmental management Life cycle assessment Principles and framework
    IEC 60436:2015 Electric dishwashers for household use - Methods for measuring the performance
    ISO 14852:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by analysis of evolved carbon dioxide
    ISO 14851:1999 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium Method by measuring the oxygen demand in a closed respirometer
    AS 4082-1992 Recycled paper - Glossary of terms
    ISO 14855-1:2012 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 1: General method
    IEC 60705:2010+AMD1:2014 CSV Household microwave ovens - Methods for measuring performance
    EN 45001 : 1989 GENERAL CRITERIA FOR THE OPERATION OF TESTING LABORATORIES
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective