API 2003 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
Available format(s)
Hardcopy , PDF
Superseded date
09-04-2020
Superseded by
Language(s)
English
Published date
01-01-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1 Scope
2 Normative References
3 Terms, Definitions, Acronyms, and Abbreviations
4 Static Electricity Hazards
5 Lightning
6 Stray Currents
Annex A (informative) - Fundamentals of Static
Electricity
Annex B (informative) - Measurement and Detection
of Static Electricity
Annex C (informative) - Direct Strike Lightning
Protection Systems
Annex D (informative) - Units of Measurement
Bibliography
Describes the current state of knowledge and technology in the fields of static electricity, lightning, and stray currents applicable to the prevention of hydrocarbon ignition in the petroleum industry and is based on both scientific research and practical experience.
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API MPM CH8.3 SPANISH : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
| API MPM CH3.3 : 1996 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| 11/30159581 DC : 0 | BS EN ISO 23251 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| BS ISO 16924 : 2016 | NATURAL GAS FUELLING STATIONS - LNG STATIONS FOR FUELLING VEHICLES |
| API 1007 : 2001 | LOADING AND UNLOADING OF MC 306/DOT 406 CARGO TANK MOTOR VEHICLES |
| API 521 : 2014 | PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| 10/30210537 DC : DRAFT JUNE 2010 | BS ISO 18132-1 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 1: AUTOMATIC TANK GAUGES FOR LIQUEFIED NATURAL GAS ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| MIL-PRF-32080 Revision G:2014 | TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
| API MPM CH3.1A SPANISH : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3.1A: STANDARD PRACTICE FOR THE MANUAL GAUGING OF PETROLEUM AND PETROLEUM PRODUCTS |
| API RP 2023 : 2001( R2006) | GUIDE FOR SAFE STORAGE AND HANDLING OF HEATED PETROLEUM-DERIVED ASPHALT PRODUCTS AND CRUDE-OIL RESIDUA |
| API 653 CHINESE : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 2350 : 2012 | OVERFILL PROTECTION FOR STORAGE TANKS IN PETROLEUM FACILITIES |
| API 1631 : 2001 | INTERIOR LINING AND PERIODIC INSPECTION OF UNDERGROUND STORAGE TANKS |
| API RP 2219 : 2016 | SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE |
| ANSI/CSA HGV 4.8-2012 (R2018) | Hydrogen gas vehicle fueling station compressor guidelines |
| Z276-18 | Liquefied natural gas (LNG) - Production, storage, and handling |
| API MPM CH17.1 SPANISH : 2014 | MANUAL DE ESTANDARES DE MEDICION DE PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 1: GUIAS PARA LA INSPECCION DE CARGAS MARITIMAS |
| PREN ISO 23251 : DRAFT 2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API 653 : 2014 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 575 : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 87 : 2018 | FLUID HEATERS |
| ISO 13702:2015 | Petroleum and natural gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines |
| PIP ELCGL01 : 2013 | ELECTRICAL DESIGN CRITERIA |
| API 650 CHINESE : 2013 | WELDED TANKS FOR OIL STORAGE |
| API MPM CH7.4 : 2018 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATURE DETERMINATION - SECTION 4 - DYNAMIC TEMPERATURE MEASUREMENT |
| API MPM CH8.3 : 1995(R2010) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
| API MPM CH3.1A : 2013 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3.1A: STANDARD PRACTICE FOR THE MANUAL GAUGING OF PETROLEUM AND PETROLEUM PRODUCTS |
| API MPM CH7 : 2001 : INC : ADD 1 : 2011 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| MIL-PRF-32020 Revision B:2011 | PROVER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER |
| API MPM CH7 : 2001 : R2007 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| NFPA 85A : 1987 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL AND NATURAL GAS FIRED SINGLE BURNER BOILER FURNACES |
| MIL-T-62032 Revision H:1991 | TRUCK, TANK, FUEL SERVICING, AND AIRCRAFT FUEL SERVICING, 1,000 - 4,000 GALLON, DIESEL & GASOLINE ENGINE DRIVEN, 16,000 GVW, 4X2, 4X4. 6 X 4 & 6X6 COMMERCIAL |
| API 2009 : 2002 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| API RP 1604 : 1996 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
| API MPM CH3.1B SPANISH : 2001(R2006) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 : TANK GAUGING - SECTION 1B: STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| NFPA 85 : 2015 | BOILER AND COMBUSTION SYSTEMS HAZARDS CODE |
| API MPM CH7 : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| EI HM 52 : 2009 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| MIL-PRF-32278 Revision B:2008 | GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
| API 1127 : 1993 | MARINE VAPOR CONTROL TRAINING GUIDELINES |
| API 2009 : 2002 : R2007 | SAFE WELDING, CUTTING, AND HOT WORK PRACTICES IN THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
| CSA/ANSI NGV 4.1-2018 | Natural gas vehicle (NGV) dispensing systems |
| API STD 2015 : 2018 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| API MPM CH17.1 REDLINE : 2008 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17 - MARINE MEASUREMENT SECTION 1 - GUIDELINES FOR MARINE CARGO INSPECTION - INCLUDES STANDARD + REDLINE (PDF) |
| STANAG 3149 : 2013 | MINIMUM QUALITY SURVEILLANCE FOR FUELS |
| API MPM CH6.2 SPANISH : 3ED 2004 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6: METERING ASSEMBLIES - SECTION 2: LOADING RACK METERING SYSTEMS |
| API 2001 : 2012 | FIRE PROTECTION IN REFINERIES |
| API 14G :2007(R2013) | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| API MPM CH17.11 : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.11 - MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT - EL HYDROCARBON MANAGEMENT HM 52 |
| API 1626 REDLINE : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| EN ISO 14692-3:2017 | Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 3: System design (ISO 14692-3:2017) |
| NFPA 59A : 2016 | PRODUCTION, STORAGE, AND HANDLING OF LIQUEFIED NATURAL GAS (LNG) |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| NFPA 52 : 2016 | VEHICULAR NATURAL GAS FUEL SYSTEMS CODE |
| UNI EN ISO 23251 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| NFPA 1 : 2021 | FIRE CODE |
| I.S. EN ISO 13702:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - CONTROL AND MITIGATION OF FIRES AND EXPLOSIONS ON OFFSHORE PRODUCTION INSTALLATIONS - REQUIREMENTS AND GUIDELINES (ISO 13702:2015) |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| API MPM CH3.3 : 1996 : R2006 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| API 2510A : 1996 : R2015 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API MPM CH6.2 : 2004(R2016) | Metering Assemblies: Loading-Rack and Tank-Truck Metering Systems for Non-LPG Products, |
| NFPA 326 : 2015 | SAFEGUARDING OF TANKS AND CONTAINERS FOR ENTRY, CLEANING, OR REPAIR |
| I.S. EN ISO 14692-3:2017 | PETROLEUM AND NATURAL GAS INDUSTRIES - GLASS-REINFORCED PLASTICS (GRP) PIPING - PART 3: SYSTEM DESIGN (ISO 14692-3:2017) |
| API MPM CH3.1B : 2001(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| 10/30215694 DC : 0 | BS ISO 18132-3 - REFRIGERATED HYDROCARBON FLUIDS AND NON-PETROLEUM BASED LIQUEFIED GASEOUS FUELS - GENERAL REQUIREMENTS FOR AUTOMATIC TANK GAUGES - PART 3: AUTOMATIC TANK GAUGES FOR LIQUEFIED PETROLEUM AND CHEMICAL GASES ON BOARD MARINE CARRIERS AND FLOATING STORAGE |
| API MPM CH17.6 SPANISH : 1994 | MANUAL DE ESTANDARE S DE MEDICION DEL PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 6: GUIAS PARA DETERMINAR EL LLENADO DE LINEAS ENTRE BUQUES Y TANQUES EN TIERRA |
| API 653 REDLINE : 2009 | TANK INSPECTION, REPAIR, ALTERATION, AND RECONSTRUCTION |
| API 1604 : 1996 : R2010 | CLOSURE OF UNDERGROUND PETROLEUM STORAGE TANKS |
| BS ISO 18132-3:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| API MPM CH7 : 2001 : INC : ADD 2 : 2017 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| SAE J2601_201612 | Fueling Protocols for Light Duty Gaseous Hydrogen Surface Vehicles |
| 17/30293124 DC : 0 | BS ISO 19880-2 - GASEOUS HYDROGEN - FUELING STATIONS - PART 2: DISPENSERS |
| API RP 1112 : 1997 | DEVELOPING A HIGHWAY EMERGENCY RESPONSE PLAN FOR INCIDENTS INVOLVING HAZARDOUS MATERIALS |
| API RP 1640 : 2013 | PRODUCT QUALITY IN LIGHT PRODUCT STORAGE AND HANDLING OPERATIONS |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| API 2021 : 2001 : R2006 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| CSA HGV 4.6 : 2013 | MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS |
| API RP 1627 : 1986 | STORAGE AND HANDLING OF GASOLINE-METHANOL/COSOLVENT BLENDS AT DISTRIBUTION TERMINALS AND SERVICE STATIONS |
| API MPM CH8.3 : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
| NFPA 85D : 1989 | PREVENTION OF FURNACE EXPLOSIONS IN FUEL OIL FIRED MULTIPLE BURNER BOILER FURNACES |
| API MPM CH7.3:2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| CSA 12.5 : 1999 : R2014 | NGV DISPENSING SYSTEMS |
| NFPA 8501 : 1997 | SINGLE BURNER BOILER OPERATION |
| API 2021A : 1998 | INTERIM STUDY - PREVENTION AND SUPPRESSION OF FIRES IN LARGE ABOVEGROUND ATMOSPHERIC STORAGE TANKS |
| SAE J313_201706 | Diesel Fuels |
| NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
| API 2610:2005 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 651 : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| API 540 : 1999 : R2006 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| API 14F : 2008 : R2013 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 2510 : 2001 : R2011 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| ISO 14692-3:2017 | Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 3: System design |
| 18/30359998 DC : 0 | BS ISO 19880-1 - GASEOUS HYDROGEN - FUELLING STATIONS - PART 1: GENERAL REQUIREMENTS |
| BS EN ISO 13702:2015 | Petroleum and natural gas industries. Control and mitigation of fires and explosions on offshore production installations. Requirements and guidelines |
| ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
| I.S. EN ISO 23251:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
| API MPM CH7.3 SPANISH : 2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| API 1003 : 3ED 86 | PRECAUTIONS AGAINST ELECTROSTATIC IGNITION DURING LOADING OF TANK TRUCK MOTOR VEHICLES |
| API MPM CH3.1B : 2001 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 1B - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY TANKS BY AUTOMATIC TANK GAUGING |
| API MPM CH7.3 : 2011(R2016) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.3: TEMPERATURE DETERMINATION - FIXED AUTOMATIC TANK TEMPERATURE SYSTEMS |
| API MPM CH7 : 2001 : R2012 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7 - TEMPERATUREDETERMINATION |
| BS ISO 18132-1:2011 | Refrigerated hydrocarbon and nonpetroleum based liquefied gaseous fuels. General requirements for automatic tank gauges Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| EEMUA 217 : 2011 | SAFE AND EFFECTIVE OPERATION OF STORAGE TANKS FOR OIL MOVEMENTS |
| API 2510A : 1996 : R2010 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| BS EN ISO 14692-3:2017 | Petroleum and natural gas industries. Glass-reinforced plastics (GRP) piping System design |
| API 2023:2001 | GUIDE FOR SAFE STORAGE AND HANDLING OF HEATED PETROLEUM-DERIVED ASPHALT PRODUCTS AND CRUDE-OIL RESIDUA |
| NACE 01110 : 0 | STRAY-CURRENT-INDUCED CORROSION IN REINFORCED AND PRESTRESSED CONCRETE STRUCTURES |
| BS ISO 23251 : 2006 AMD 17355 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API 1141 : 1994 | GUIDELINES FOR CONFINED SPACE ENTRY ON BOARD TANK SHIPS IN THE PETROLEUM INDUSTRY |
| ISO 16924:2016 | Natural gas fuelling stations — LNG stations for fuelling vehicles |
| API PUBL 1642 : 1996 | ALCOHOLS, ETHERS, AND GASOLINE-ALCOHOL AND -ETHER BLENDS - A REPORT ON FIRE-SAFETY CONSIDERATIONS AT PETROLEUM MARKETING FACILITIES |
| 04/30127186 DC : DRAFT DEC 2004 | ISO 23251 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| API 2027 : 2002 : R2007 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| ANSI/AIHA/ASSP Z9.9-2010 | PORTABLE VENTILATION SYSTEMS |
| CSA B836 : 2014 | STORAGE, HANDLING, AND DISPENSING OF AVIATION FUELS AT AERODROMES |
| API RP 2021 : 2001 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| API 2008 : 4ED 84 | SAFE OPERATION OF INLAND BULK PLANTS |
| NFPA 350 : 2016 | SAFE CONFINED SPACE ENTRY AND WORK |
| CSA 12.5 : 1999 : R2004 | NGV DISPENSING SYSTEMS |
| API 2021 : 2001 : R2015 | MANAGEMENT OF ATMOSPHERIC STORAGE TANK FIRES |
| CSA B836:14 (R2019) | Storage, handling, and dispensing of aviation fuels at aerodromes |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| EI/JIG 1530 : 2019 | Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API 14G : 2007 | RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS |
| ABS 0057 : 2017 COR 2017 | GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS |
| API 1626 : 2010 | STORING AND HANDLING ETHANOL AND GASOLINE-ETHANOL BLENDS AT DISTRIBUTION TERMINALS AND FILLING STATIONS |
| API 540:1999 | ELECTRICAL INSTALLATIONS IN PETROLEUM PROCESSING PLANTS |
| API RP 14F:2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| API 2610 : 2005 : R2010 | DESIGN, CONSTRUCTION, OPERATION, MAINTENANCE, AND INSPECTION OF TERMINAL AND TANK FACILITIES |
| API 650 : 2013+ADD 3 : 2018 | WELDED TANKS FOR OIL STORAGE |
| ISO 23251:2006 | Petroleum, petrochemical and natural gas industries Pressure-relieving and depressuring systems |
| BS EN ISO 23251 : 2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
| EI 1540 : 2014 | DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE AND TESTING OF AVIATION FUELLING FACILITIES |
| EI MODEL CODE SAFE PRACTICE PT7 : 1998 | DESIGN, CONSTRUCTION, OPERATION AND MAINTENANCE OF AVIATION FUELLING FACILITIES |
| NFPA 85C : 1991 | PREVENTION OF FURNACE EXPLOSIONS & IMPLOSIONS IN MULTIPLE BURNER BOILER FURNACES |
| API PUBL 2510A : 1996 | FIRE-PROTECTION CONSIDERATIONS FOR THE DESIGN AND OPERATION OF LIQUEFIED PETROLEUM GAS (LPG) STORAGE FACILITIES |
| API MPM CH3.3 : 1996(R2017) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| PD ISO/TS 18683:2015 | Guidelines for systems and installations for supply of LNG as fuel to ships |
| API RP 1004:2003 | BOTTOM LOADING AND VAPOR RECOVERY FOR MC-306 & DOT-406 TANK MOTOR VEHICLES |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| API SPEC 12P : 2016 | SPECIFICATION FOR FIBERGLASS REINFORCED PLASTIC TANKS |
| API MPM CH3.3 : 1996 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 3 - TANK GAUGING - SECTION 3 - STANDARD PRACTICE FOR LEVEL MEASUREMENT OF LIQUID HYDROCARBONS IN STATIONARY PRESSURIZED STORAGE TANKS BY AUTOMATIC TANK GAUGING |
| API 2508 : 1985 | DESIGN AND CONSTRUCTION OF ETHANE AND ETHYLENE INSTALLATIONS AT MARINE AND PIPELINE TERMINALS, NATURAL GAS PROCESSING PLANTS REFINERIES, PETROCHEMICAL PLANTS AND TANK FARMS |
| API MPM CH6.2:2004 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 2 - LOADING RACK METERING SYSTEMS |
| API RP 2027 : 2002 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| API MPM CH7.5 : 2014 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 7.5: TEMPERATURE DETERMINATION - AUTOMATIC TANK TEMPERATURE MEASUREMENT ONBOARD MARINE VESSELS CARRYING REFRIGERATED HYDROCARBON AND CHEMICAL GAS FLUIDS |
| API MPM CH8.3 : 1995(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
| API 545 : 2009 | RECOMMENDED PRACTICE FOR LIGHTNING PROTECTION OF ABOVEGROUND STORAGE TANKS FOR FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| API 9100B : 1998 | GUIDANCE DOCUMENT FOR MODEL EHS MANAGEMENT SYSTEM |
| API 2027 : 2002 : R2012 | IGNITION HAZARDS AND SAFE WORK PRACTICES FOR ABRASIVE BLASTING OF ATMOSPHERIC STORAGE TANKS IN HYDROCARBON SERVICE |
| EI/JIG 1530 : 2013 | QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
| ISO 18132-3:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 3: Automatic tank gauges for liquefied petroleum and chemical gases on board marine carriers and floating storage |
| API MPM CH17.1 SPANISH : 2008 | MANUAL DE ESTANDARES DE MEDICION DE PETROLEO - CAPITULO 17: MEDICIONES MARITIMAS - SECCION 1: GUIAS PARA LA INSPECCION DE CARGAS MARITIMAS |
| API MPMS CH17.11 SPANISH : 2016 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 17.11: MEASUREMENT AND SAMPLING OF CARGOES ON BOARD TANK VESSELS USING CLOSED AND RESTRICTED EQUIPMENT |
| API MPM CH6.2 : 2004 : R2011 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES - SECTION 2 - LOADING RACK METERING SYSTEMS |
| ISO 18132-1:2011 | Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — General requirements for automatic tank gauges — Part 1: Automatic tank gauges for liquefied natural gas on board marine carriers and floating storage |
| API 14FZ : 2013 | RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS |
| API 2510 : 2001 | DESIGN AND CONSTRUCTION OF LPG INSTALLATIONS |
| API 651 CHINESE : 2014 | CATHODIC PROTECTION OF ABOVEGROUND PETROLEUM STORAGE TANKS |
| API 575 CHINESE : 2014 | INSPECTION PRACTICES FOR ATMOSPHERIC AND LOW-PRESSURE STORAGE TANKS |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| ISO/TS 18683:2015 | Guidelines for systems and installations for supply of LNG as fuel to ships |
| API 14F REDLINE : 2008 | DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS |
| NFPA 1 : 2018 | FIRE CODE |
| CSA HGV 4.1 : 2013 | STANDARD FOR HYDROGEN DISPENSING SYSTEMS |
| EN ISO 13702:1999 | Petroleum and natural gas industries - Control and migration of fires and explosions on offshore production installations - Requirements and guidelines (ISO 13702:1999) |
| PIP VEETA001 : 2016 | TANK SELECTION GUIDE |
| API 1529 : 1998 | AVIATION FUELING HOSE |
| NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
| NFPA 780 : 2017 | INSTALLATION OF LIGHTNING PROTECTION SYSTEMS |
| ISO 9563:2015 | Belt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method |
| API 2016 : 2001 | GUIDELINES AND PROCEDURES FOR ENTERING AND CLEANING PETROLEUM STORAGE TANKS |
| NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
| ASTM D 2624 : 2015 : REDLINE | Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels |
| ISO 1813:2014 | Belt drives — V-ribbed belts, joined V-belts and V-belts including wide section belts and hexagonal belts — Electrical conductivity of antistatic belts: Characteristics and methods of test |
| API RP 2219 : 2016 | SAFE OPERATION OF VACUUM TRUCKS HANDLING FLAMMABLE AND COMBUSTIBLE LIQUIDS IN PETROLEUM SERVICE |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 | FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS |
| API 2015 : 2014 | REQUIREMENTS FOR SAFE ENTRY AND CLEANING OF PETROLEUM STORAGE TANKS |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| NFPA 77 : 2014 | STATIC ELECTRICITY |
| API 650 : 2013 | WELDED TANKS FOR OIL STORAGE |
| API 545 : 2009 | RECOMMENDED PRACTICE FOR LIGHTNING PROTECTION OF ABOVEGROUND STORAGE TANKS FOR FLAMMABLE OR COMBUSTIBLE LIQUIDS |
| NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.