Skip to content
Please enter a keyword to search

  • API 14FZ : 2013

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    RECOMMENDED PRACTICE FOR DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, ZONE 0, ZONE 1, AND ZONE 2 LOCATIONS

    Available format(s):  Hardcopy, PDF

    Superseded date:  24-04-2020

    Language(s):  English

    Published date:  01-05-2013

    Publisher:  American Petroleum Institute

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 General
    2 Normative References
    3 Acronyms, Terms, and Definitions
    4 Electrical Equipment for Hazardous (Classified) Locations
    5 Electric Power Generating Stations
    6 Electrical Distribution Systems
    7 Electric Motors
    8 Transformers
    9 Lighting
    10 Battery-powered DC Supply Systems
    11 Special Systems
    12 Special Considerations
    13 System Checkout
    14 Maintenance
    15 Safety
    Annex A (informative) - Inspection Intervals
    Annex B (informative) - ABS Rules For Building and Classing
            Steel Vessels - 1998, PART 4
    Annex C (informative) - USCG Requirements, 46 CFR,
            Subchapter J, 111.95
    Annex D (informative) - USCG Requirements, 46 CFR,
            Subchapter J, 111.97
    Annex E (informative) - USCG Requirements, 46 CFR,
            Subchapter J, Subpart 111.105
    Annex F (informative) - Electrical Inspection Checklist

    Abstract - (Show below) - (Hide below)

    Provides minimum requirements and guidelines for the design, installation, and maintenance of electrical systems on fixed and floating petroleum facilities located offshore.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher American Petroleum Institute
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    API RP 75:2004 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
    IEEE 1242 : 1999 GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL-PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS
    API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
    API 14G : 2007 RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
    API 75 : 2004 : R2013 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
    C22.1-15 PACKAGE Consists of C22.1-15, Canadian electrical code, part I (23rd edition), safety standard for electrical installations; C22.1HB-15, Canadian electrical code handbook - an explanation of rules of the Canadian electrical code, part I and the 2015 Electrical quick reference
    API 14G :2007(R2013) RECOMMENDED PRACTICE FOR FIRE PREVENTION AND CONTROL ON FIXED OPEN-TYPE OFFSHORE PRODUCTION PLATFORMS
    C22.1HB-18 Canadian Electrical Code Handbook - An Explanation of the Rules of the Canadian Electrical Code, Part I
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    API 14F : 2008 : R2013 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    API 75 : 2019 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
    IEEE 45.8:2016 ELECTRICAL INSTALLATIONS ON SHIPBOARD - CABLE SYSTEMS
    API 75 CHINESE : 2004 : R2008 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
    ABS 0057 : 2017 COR 2017 GUIDE FOR THE CLASSIFICATION OF DRILLING SYSTEMS
    API 14F:2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    IEEE 1717-2012 IEEE Standard for Testing Circuit Integrity Cables Using a Hydrocarbon Pool Fire Test Protocol
    API RP 75 CHINESE : 2004 RECOMMENDED PRACTICE FOR DEVELOPMENT OF A SAFETY AND ENVIRONMENTAL MANAGEMENT PROGRAM FOR OFFSHORE OPERATIONS AND FACILITIES
    ABS 0063 : 2018 COR 2018 RULES FOR BUILDING AND CLASSING FACILITIES ON OFFSHORE INSTALLATIONS
    IEEE 45.1 : 2017 IEEE Recommended Practice for Electrical Installations on Shipboard--Design
    IEEE 1349-2011 GUIDE FOR THE APPLICATION OF ELECTRIC MOTORS IN CLASS 1, DIVISION 2 AND CLASS 1, ZONE 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA RP12.12.03 : 2002 PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    API 14F REDLINE : 2008 DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL SYSTEMS FOR FIXED AND FLOATING OFFSHORE PETROLEUM FACILITIES FOR UNCLASSIFIED AND CLASS 1, DIVISION 1 AND DIVISION 2 LOCATIONS
    C22.1-18 Canadian Electrical Code, Part I (24th Edition), Safety Standard for Electrical Installations
    IEEE 1810:2017 THE INSTALLATION OF FIRE-RATED CABLES SUITABLE FOR HYDROCARBON POOL FIRES FOR CRITICAL AND EMERGENCY SHUTDOWN SYSTEMS IN PETROLEUM AND CHEMICAL INDUSTRIES

    Standards Referencing This Book - (Show below) - (Hide below)

    ANSI C37.12 : 2008 SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS
    NFPA 91 : 2015 EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS
    IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
    CFR 33(PTS125-199) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
    ISA 60079-7 : 2008 EXPLOSIVE ATMOSPHERES - PART 7: EQUIPMENT PROTECTION BY INCREASED SAFETY "E"
    IEEE 1566 : 2015 PERFORMANCE OF ADJUSTABLE-SPEED AC DRIVES RATED 375 KW AND LARGER
    IEC 60079-10:2002 Electrical apparatus for explosive gas atmospheres - Part 10: Classification of hazardous areas
    IEEE C37.14:2015 DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    IEEE C37.102-2006 REDLINE IEEE Guide for AC Generator Protection
    CFR 46(PTS41-69) : OCT 2017 SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION
    IEEE C37.20.1:2015 METAL-ENCLOSED LOW-VOLTAGE (1000 VAC AND BELOW, 3200 VDC AND BELOW) POWER CIRCUIT BREAKER SWITCHGEAR
    IEEE 1202-2006 IEEE Standard for Flame-Propagation Testing of Wire & Cable
    CFR 46(PTS90-139) : OCT 2017 SHIPPING - COAST GUARD, DEPARTMENT OF TRANSPORTATION
    IEC 61158-2:2014 Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition
    CSA C22.2 No. 157 : 1992 INTRINSICALLY SAFE AND NON-INCENDIVE EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS
    LR R&R CLASS.MOBILE OFFSH.UNITS-FULL SET : NOTICE 1 RULES AND REGULATIONS FOR THE CLASSIFICATION OF MOBILE OFFSHORE UNITS - FULL SET
    API 500 : 2012 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2
    NEMA WC 74 : 2012 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF ELECTRIC ENERGY
    ISA 12.01.01 : 2009 DEFINITIONS AND INFORMATION PERTAINING TO ELECTRICAL EQUIPMENT IN HAZARDOUS (CLASSIFIED) LOCATIONS
    IEC 62271-200:2011 High-voltage switchgear and controlgear - Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV
    FAA AC 150/5390-2 : 2004 HELIPORT DESIGN
    UL 514A:11ED 2013-02 Metallic Outlet Boxes
    NEMA MG 1 : 2016 MOTORS AND GENERATORS
    UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
    NEMA MG 2:2014 Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators
    C22.1-15 Canadian Electrical Code, Part I (23rd Edition), Safety Standard for Electrical Installations
    NFPA 780 : 2017 INSTALLATION OF LIGHTNING PROTECTION SYSTEMS
    UL 1072:4ED 2006-06 Medium-Voltage Power Cables
    CFR 29(PTS1900-1910) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR
    NEMA MG 10:2017 Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors
    IEC 61779-6:1999 Electrical apparatus for the detection and measurement of flammable gases - Part 6: Guide for the selection, installation, use and maintenance of apparatus for the detection and measurement of flammable gases
    API RP 14C : 2017 ANALYSIS, DESIGN, INSTALLATION, AND TESTING OF SAFETY SYSTEMS FOR OFFSHORE PRODUCTION FACILITIES
    ISA 12.12.01 : 2007 NONINCENDIVE ELECTRICAL EQUIPMENT FOR USE IN CLASS 1 AND 2, DIVISION 2 AND CLASS 3, DIVISIONS 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA TR12.24.01 : 1998 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS CLASSIFIED AS CLASS 1, ZONE 0, ZONE 1, OR ZONE 2
    NEMA WC 70 : 2009 POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY
    ISA RP92.0.02-2 : 1998 INSTALLATION, OPERATION, AND MAINTENANCE OF TOXIC GAS-DETECTION INSTRUMENTS: HYDROGEN SULFIDE
    API 546 : 2008 BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER
    IEC 60331-11:1999+AMD1:2009 CSV Tests for electric cables under fire conditions - Circuit integrity - Part 11: Apparatus - Fire alone at a flame temperature of at least 750 °C
    IEEE 841 : 2009 PETROLEUM AND CHEMICAL INDUSTRY - PREMIUM-EFFICIENCY, SEVERE-DUTY, TOTALLY ENCLOSED FAN-COOLED (TEFC) SQUIRREL CAGE INDUCTION MOTORS - UP TO AND INCLUDING 370 KW (500 HP)
    NFPA 101 : 2018 LIFE SAFETY CODE
    IMO IE110 : 2009 SOLAS (CONSOLIDATED EDITION)
    IEEE C37.20.2-2015 REDLINE IEEE Standard for Metal-Clad Switchgear
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    IEEE Y32.9 : 1972 AMERICAN NATIONAL STANDARD GRAPHIC SYMBOLS FOR ELECTRICAL WIRING AND LAYOUT DIAGRAMS USED IN ARCHITECTURE AND BUILDING CONSTRUCTION
    NEMA 250 : 2014 ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
    NEMA ICS 6-1993 (R2006) Industrial Control and Systems: Enclosures
    UL 83:16ED 2017-07 Standard for Thermoplastic-Insulated Wires and Cables
    NFPA 90A : 2018 INSTALLATION OF AIR-CONDITIONING AND VENTILATING SYSTEMS
    UL 1008:8ED 2014-12 Transfer Switch Equipment
    NFPA 69 : 2014 EXPLOSION PREVENTION SYSTEMS
    NEMA ICS 2.1 : 1990
    API 2003 : 2015 PROTECTION AGAINST IGNITIONS ARISING OUT OF STATIC, LIGHTNING, AND STRAY CURRENTS
    ISA 60079-1 : 2005 EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES "D"
    NACE SP 01 76 : 2007 CORROSION CONTROL OF SUBMERGED AREAS OF PERMANENTLY INSTALLED STEEL OFFSHORE STRUCTURES ASSOCIATED WITH PETROLEUM PRODUCTION
    NFPA 496 : 2017 PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT
    IEC 61779-2:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 2: Performance requirements for group I apparatus indicating a volume fraction up to 5 % methane in air
    ISA 60079-2 : 2010(R2015) EXPLOSIVE ATMOSPHERES - PART 2: EQUIPMENT PROTECTION BY PRESSURIZED ENCLOSURES 'P'
    ICEA P 32 382 : 2007(R2018) SHORT CIRCUIT CHARACTERISTICS OF INSULATED CABLES
    IEEE/ASTM SI_10-2010 American National Standard for Metric Practice
    NEMA VE 2 : 2013 CABLE TRAY INSTALLATION GUIDELINES
    IEC 60050-426:2008 International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres
    ISA RP12.12.03 : 2002 PORTABLE ELECTRONIC PRODUCTS SUITABLE FOR USE IN CLASS 1 AND 2, DIVISION 2, CLASS 1 ZONE 2 AND CLASS 3, DIVISION 1 AND 2 HAZARDOUS (CLASSIFIED) LOCATIONS
    ISA 60079-18 : 2005 EXPLOSIVE ATMOSPHERES - PART 18: EQUIPMENT PROTECTION BY ENCAPSULATION "M"
    UL 514C:4ED 2014-04 Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers
    IEEE 315 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS)
    NFPA ELEC INSTALLATIONS IN HAZ LOCATIONS : 2008 ELECTRICAL INSTALLATIONS IN HAZARDOUS LOCATIONS
    NEMA FG 1:1993 FIBERGLASS CABLE TRAY SYSTEMS
    IEEE 835-1994 IEEE Standard Power Cable Ampacity Tables
    ISA 60079-11 : 2002 EXPLOSIVE ATMOSPHERES - PART 11: EQUIPMENT PROTECTION BY INTRINSIC SAFETY 'I'
    IEC 61779-4:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating up to 100% lower explosive limit
    IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    ISA 60079-6 : 1998 EXPLOSIVE ATMOSPHERES - PART 6: EQUIPMENT PROTECTION BY OIL-IMMERSION 'O'
    UL 1309:3ED 2017-04 Marine Shipboard Cable
    IEEE C37.010 : 1999 AC HIGH-VOLTAGE CIRCUIT BREAKERS > 1000 VAC RATED ON A SYMMETRICAL CURRENT BASIS
    NEMA VE 1:2017 Metal Cable Tray Systems
    IEEE C37.13-2015 LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    ISA 12.13.01 : 2003 PERFORMANCE REQUIREMENTS FOR COMBUSTIBLE GAS DETECTORS
    UL 2196:2ED 2017-08 Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control and Data Cables
    ANSI C84.1 : 2016 ELECTRIC POWER SYSTEMS AND EQUIPMENT - VOLTAGE RATINGS (60 HERTZ)
    ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    LR R&R CLASS.FIXED OFFSH.INST.- FULL SET : NOTICE 10 RULES AND REGULATIONS FOR THE CLASSIFICATION OF FIXED OFFSHORE INSTALLATIONS - FULL SET
    IES HB 10 : 2011 THE LIGHTING HANDBOOK
    ISA TR12.21.01 : 2004 USE OF FIBER OPTIC SYSTEMS IN CLASS 1 HAZARDOUS (CLASSIFIED) LOCATIONS
    UL 1203:5ED 2013-11 ExplosionProof and Dust-IgnitionProof Electrical Equipment for Use in Hazardous (Classified) Locations
    NFPA 70E : 2018 ELECTRICAL SAFETY IN THE WORKPLACE
    API 505 : 1997 RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS I, ZONE 0, ZONE 1, AND ZONE 2
    IEEE 484-2002 RECOMMENDED PRACTICE FOR INSTALLATION DESIGN AND INSTALLATION OF VENTED LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    NFPA 99 : 2018 HEALTH CARE FACILITIES CODE
    IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    ANSI C37.06 : 2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
    IEEE 1100 : 2005 POWERING AND GROUNDING ELECTRONIC EQUIPMENT
    IEC 60331-21:1999 Tests for electric cables under fire conditions - Circuit integrity - Part 21: Procedures and requirements - Cables of rated voltage up to and including 0,6/1,0 kV
    NFPA FIRE PROT GUIDE ON HAZARDOUS MAT : 2010 FIRE PROTECTION GUIDE TO HAZARDOUS MATERIALS
    IEC 60533:2015 Electrical and electronic installations in ships - Electromagnetic compatibility (EMC) - Ships with a metallic hull
    FAA AC 70-7460-1 : 2015 OBSTRUCTION MARKING AND LIGHTING
    IEC 61779-3:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air
    IEEE C37.04A : 2003 RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - AMENDMENT 1: CAPACITANCE CURRENT SWITCHING
    IEEE 450-2010 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
    CFR 33(PTS1-124) : JUL 2017 NAVIGATION AND NAVIGABLE WATERS
    NEMA ICS 2.4 : 2003(R2012) INDUSTRIAL CONTROL AND SYSTEMS: NEMA AND IEC DEVICES FOR MOTOR SERVICE - A GUIDE FOR UNDERSTANDING THE DIFFERENCES
    LR R&R CLASS.FLOAT.OFFSHORE INS.FULL SET : NOTICE 4 RULES AND REGULATIONS FOR THE CLASSIFICATION OF A FLOATING OFFSHORE INSTALLATION AT A FIXED LOCATION - FULL SET
    IES RP 1 : 2004 PRACTICE FOR OFFICE LIGHTING
    NEMA ICS 1 : 2000(R2015) INDUSTRIAL CONTROL AND SYSTEMS: GENERAL REQUIREMENTS
    ISA 12.27.01 : 2003 REQUIREMENTS FOR PROCESS SEALING BETWEEN ELECTRICAL SYSTEMS AND FLAMMABLE OR COMBUSTIBLE PROCESS FLUIDS
    ISA 12.20.01 : 2009(R2014) GENERAL REQUIREMENTS FOR ELECTRICAL IGNITION SYSTEMS FOR INTERNAL COMBUSTION ENGINES IN CLASS 1, DIVISION 2 OR ZONE 2, HAZARDOUS (CLASSIFIED) LOCATIONS
    API STD 541 : 2014 FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER
    IP 15 : 2015 PETROLEUM PRODUCTS - DETERMINATION OF POUR POINT
    API SPEC 17E : 2017 SPECIFICATION FOR SUBSEA UMBILICALS
    IEEE C37.27-2008 LOW-VOLTAGE AC (635 V AND BELOW) POWER CIRCUIT BREAKERS APPLIED WITH SEPARATELY-MOUNTED CURRENT-LIMITING FUSES
    NFPA 30 : 2018 FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
    ISA RP12.13.02 : 2003 INSTALLATION, OPERATION, AND MAINTENANCE OF COMBUSTIBLE GAS DETECTION INSTRUMENTS
    UL 13:4ED 2015-03 Power-Limited Circuit Cables
    IEC 61779-5:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 5: Performance requirements for group II apparatus indicating a volume fraction up to 100 % gas
    NFPA 77 : 2014 STATIC ELECTRICITY
    UL 783:6ED 2003-04 Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations
    UL 2250:3ED 2017-03 Instrumentation Tray Cable
    CFR 49(PTS178-199) : OCT 2017 TRANSPORTATION
    IEEE C57.12.70-2011 STANDARD TERMINAL MARKINGS AND CONNECTIONS FOR DISTRIBUTION AND POWER TRANSFORMERS
    CFR 29(PT1926) : 0 LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR - SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION
    NFPA 54 : 2018 NATIONAL FUEL GAS CODE
    CFR 30(PTS200-699) : JUL 2017 MINERAL RESOURCES - DEPARTMENT OF THE INTERIOR
    NFPA 37 : 2018 INSTALLATION AND USE OF STATIONARY COMBUSTION ENGINES AND GAS TURBINES
    IEC 60947-2:2016 Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
    NEMA ICS 2.3 : 1995(R2008) INDUSTRIAL CONTROL AND SYSTEMS: INSTRUCTIONS FOR THE HANDLING, INSTALLATION, OPERATION AND MAINTENANCE OF MOTOR CONTROL CENTERS
    ISA 12.10.05 : 2004 ELECTRICAL APPARATUS FOR USE IN ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS - CLASSIFICATION OF ZONE 20, ZONE 21 AND ZONE 22 HAZARDOUS (CLASSIFIED) LOCATIONS
    IEEE 1242 : 1999 GUIDE FOR SPECIFYING AND SELECTING POWER, CONTROL AND SPECIAL-PURPOSE CABLE FOR PETROLEUM AND CHEMICAL PLANTS
    IEEE 515-2011 TESTING, DESIGN, INSTALLATION, AND MAINTENANCE OF ELECTRICAL RESISTANCE TRACE HEATING FOR INDUSTRIAL APPLICATIONS
    API 547 : 2017 GENERAL PURPOSE FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 185 KW (250 HP) THROUGH 2240 KW (3000 HP)
    ISA 60079-0 : 2005 EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS
    IEC 61779-1:1998 Electrical apparatus for the detection and measurement of flammable gases - Part 1: General requirements and test methods
    ISA 51.1 : 1979 PROCESS INSTRUMENTATION TERMINOLOGY
    ANSI/NEMA WC 71/ICEA S-96-659:2014 Standard for Nonshielded Cables Rated 2001-5000 V for Use in the Distribution of Electric Energy
    ISA TR12.06.01 : 1999 ELECTRICAL EQUIPMENT IN A CLASS 1, DIVISION 2/ZONE 2 HAZARDOUS LOCATION
    UL 515:2ED 2015-07 Standard for Electrical Resistance Trace Heating for Commercial Applications
    ISA 5.1 : 1984 INSTRUMENTATION SYMBOLS AND IDENTIFICATION
    IEC 60068-2-52:2017 Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution)
    ASME A17.1 : 2016 SAFETY CODE FOR ELEVATORS AND ESCALATORS - INCLUDES REQUIREMENTS FOR ELEVATORS, ESCALATORS, DUMBWAITERS, MOVING WALKS, MATERIAL LIFTS, AND DUMBWAITERS WITH AUTOMATIC TRANSFER DEVICES
    IEEE 485 : 2010 RECOMMENDED PRACTICE FOR SIZING LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    ISA 92.00.01 : 2010(R2015) PERFORMANCE REQUIREMENTS FOR TOXIC GAS DETECTORS
    NFPA 20 : 2016 INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION
    IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
    API 2218 : 2013 FIREPROOFING PRACTICES IN PETROLEUM AND PETROCHEMICAL PROCESSING PLANTS
    ISA RP12.06.01 : 2003 RECOMMENDED PRACTICE FOR WIRING METHODS FOR HAZARDOUS (CLASSIFIED) LOCATIONS INSTRUMENTATION - PART 1: INTRINSIC SAFETY
    IEEE 303-2004 IEEE Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations
    IEC 61241-10:2004 Electrical apparatus for use in the presence of combustible dust - Part 10: Classification of areas where combustible dusts are or may be present
    ISA 60079-15 : 2003 EXPLOSIVE ATMOSPHERES - PART 15: EQUIPMENT PROTECTION BY TYPE OF PROTECTION "N"
    NFPA 497 : 2017 CLASSIFICATION OF FLAMMABLE LIQUIDS, GASES, OR VAPORS AND OF HAZARDOUS (CLASSIFIED) LOCATIONS FOR ELECTRICAL INSTALLATIONS IN CHEMICAL PROCESS AREAS
    CSA PLUS 2203 : 2001 HAZARDOUS LOCATIONS - GUIDE FOR THE DESIGN, TESTING, CONSTRUCTION, AND INSTALLATION OF EQUIPMENT IN EXPLOSIVE ATMOSPHERES
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective