AS/NZS 5000.1:2005
Current
The latest, up-to-date edition.
Electric cables - Polymeric insulated For working voltages up to and including 0.6/1 (1.2) kV (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
17-11-2005
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Specifies the construction, dimensions and test requirements for single- and multicore cables insulated with polymeric materials intended for use at working voltages up to and including 0.6/1 (1.2) kV. It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards.
| Committee |
EL-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7004 5
|
| Pages |
25
|
| ProductNote |
Reconfirmed 20/01/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 20/01/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes | |
| UnderRevision |
This Standard specifies construction, dimensions and tests for single- and multicore cables insulated with polymeric materials intended for use in electrical installations at working voltages up to and including 0.6/1 (1.2)kV.It does not apply to polymeric insulated cables for special installations and service conditions or for which there are separate Australian/New Zealand Standards, e.g. neutral screened cables, welding cables, flexible cords and aerial bundled cables.NOTES: 1 Purchasing guidelines are contained in AppendixA.2 AS/NZS3008.1 should be referenced to assist correct cable size selection for the intended application and installation.
Originated as AS/NZS 5000.1:1999.
Second edition 2003, incorporating AS 3178-1991.
Third edition 2005.
Reissued incorporating Amendment No. 1 (December 2006).
| AS/NZS 4507:1998 | Cables - Fire performance |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3560.2:2003 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1 (1.2) kV Copper conductors |
| AS/NZS 1660.1:1998 | Test methods for electric cables, cords and conductors Conductors and metallic components (Reconfirmed 2017) |
| AS/NZS 3008.1.2:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand installation conditions |
| AS/NZS 1660.2.3:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials (Reconfirmed 2017) |
| AS/NZS 1125:2001 | Conductors in insulated electric cables and flexible cords (Reconfirmed 2017) |
| AS/NZS 3808:2000 | Insulating and sheathing materials for electric cables (Reconfirmed 2017) |
| AS/NZS 4961:2003 | Electric cables - Polymeric insulated - For distribution and service applications (Reconfirmed 2017) |
| AS/NZS 1660.5.6:2005 | Test methods for electric cables, cords and conductors Fire tests - Test for vertical flame propagation for a single insulated wire or cable |
| AS/NZS 1660.3:1998 | Test methods for electric cables, cords and conductors Electrical tests (Reconfirmed 2017) |
| AS 2706-2003 | Numerical values - Rounding and interpretation of limiting values (Reconfirmed 2018) |
| AS/NZS 1660.2.2:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to elastomeric, XLPE and XLPVC materials (Reconfirmed 2017) |
| AS 3008.1-1989 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV |
| AS/NZS 3008.1.1:1998 | Electrical installations - Selection of cables - Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS/NZS 2893:2002 | Electric cables - Lead and lead alloy sheaths - Composition |
| AS/NZS 3863:2002 | Galvanized mild steel wire for armouring of cables |
| AS/NZS 1660.2.1:1998 | Test methods for electric cables, cords and conductors Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods for general application (Reconfirmed 2017) |
| AS/NZS 3560.1:2000 | Electric cables - Cross-linked polyethylene insulated - Aerial bundled - For working voltages up to and including 0.6/1(1.2) kV Aluminium conductors (Reconfirmed 2021) |
| AS/ACIF S008-2006 | Requirements for customer cabling products |
| AS/NZS 3001:2001 | Electrical installations - Relocatable premises (including caravans and tents) and their site installations |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
| AS/NZS 3015:2004 | Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks |
| AS/NZS 3003:2018 | Electrical installations - Patient areas |
| AS/NZS 1768:2007 | Lightning protection |
| AS 2832.1-2004 | Cathodic protection of metals Pipes and cables |
| AS/NZS 5000.2:2006 | Electric cables - Polymeric insulated For working voltages up to and including 450/750 V (Reconfirmed 2017) |
| AS 1530.4-2005 | Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction |
| AS/NZS 4026:2001 | Electric cables - For underground residential distribution systems |
| AS/NZS 2802:2000 | Electric cables - Reeling and trailing - For mining and general use (other than underground coal mining) (Reconfirmed 2020) |
| AS/NZS 3004.2:2008 | Electrical installations - Marinas and recreational boats Recreational boats installations |
| AS/NZS 1972:2006 | Electric cables - Underground coal mines - Other than reeling and trailing (Reconfirmed 2020) |
| AS/NZS 3008.1.1:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS/NZS 3003:2003 | Electrical installations - Patient treatment areas of hospitals and medical, dental practices and dialyzing locations |
| AS/NZS 3003:2011 | Electrical installations - Patient areas |
| AS 2353:2018 | Pedestrian push-button assemblies |
| AS 2144:2014 | Traffic signal lanterns |
| AS/NZS 1802:2003 | Electric cables - Reeling and trailing - For underground coal mining purposes |
| AS/NZS 4026:2008 | Electric cables - For underground residential distribution systems |
| AS/NZS 3008.1.2:2010 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 3123:2005 | Approval and test specification - Plugs, socket-outlets and couplers for general industrial application (Reconfirmed 2016) |
| AS/NZS 3004.1:2008 | Electrical installations - Marinas and recreational boats Marinas |
| AS/NZS 1802:2018 | Electric cables - Reeling and trailing - For underground coal mining |
| AS/NZS 4703:2007 | Electrical wiring in furniture (Reconfirmed 2018) |
| AS/NZS 2381.1:2005 | Electrical equipment for explosive gas atmospheres - Selection, installation and maintenance General requirements |
| AS/NZS 3013:2005 | Electrical installations - Classification of the fire and mechanical performance of wiring system elements (Reconfirmed 2020) |
| AS/NZS 5139:2019 | Electrical installations - Safety of battery systems for use with power conversion equipment |
| AS/NZS 3001:2008 | Electrical installations - Transportable structures and vehicles including their site supplies |
| AS/NZS 3004:2002 | Electrical installations - Marinas and pleasure craft at low-voltage |
| AS/NZS 2201.1:2007 | Intruder alarm systems Client’s premises - Design, installation, commissioning and maintenance |
| AS 2832.2-2003 | Cathodic protection of metals Compact buried structures |
| AS/NZS 3008.1.1:2009 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical Australian installation conditions |
| AS 2832.3-2005 | Cathodic protection of metals Fixed immersed structures |
| AS 2832.5-2008 | Cathodic protection of metals Steel in concrete structures |
| AS/NZS 3008.1.2:2017 | Electrical installations - Selection of cables Cables for alternating voltages up to and including 0.6/1 kV - Typical New Zealand conditions |
| AS/NZS 3439.1:2002 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type tested assemblies (IEC 60439-1:1999 MOD) |
| AS/NZS 1299:2009 | Electrical equipment for mines and quarries - Explosion-protected three-phase restrained plugs and receptacles for working voltages up to and including 3.3 kV (Reconfirmed 2020) |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 2832.4-2006 | Cathodic protection of metals Internal surfaces (Reconfirmed 2016) |
| AS/NZS 2144:2002 | Traffic signal lanterns |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.