AS/NZS 5601.1:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Gas installations General installations
Amended by
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
04-09-2024
Superseded by
Published date
16-09-2013
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.AS NZS 5601.1 2013 gas standards, that specifies requirements and means of compliance for the design, installation and commissioning of gas installations that are associated with use or intended use of fuel gases such as natural gas, LP Gas, biogas or manufactured gas.
| Committee |
AG-006
|
| DevelopmentNote |
New PDF incorporating Amendment 4.. Under Revision by DR AS/NZS 5601.1:2021.
|
| DocumentType |
Standard
|
| ISBN |
978 1 74342 579 4
|
| Pages |
287
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard contains the mandatory requirements and means of compliance for the design, installation and commissioning of gas installations that are associated with the use or intended use of fuel gases such as natural gas, LP Gas, or biogas.
Originated in Australia as AS 5601/AG 601-2000.
Originated in New Zealand as NZS 5261:1996.
Previous edition AS/NZS 5601.1:2010.
Second edition 2013.
Reissued incorporating Amendment No. 1 (August 2015).
Reissued incorporating Amendment No. 2 (May 2016).
Reissued incorporating Amendment No. 3 (April 2020).
Reissued incorporating Amendment No. 4 (September 2020).
| AS 4617-2004 | Manual shut off gas valves |
| AS 1397-2011 | Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium |
| AS 1464.1-1984 | Plastics pipes and fittings for gas reticulation - Unplasticized PVC (UPVC) Pipes |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 4623-2008 | Jointing compounds and materials for use in gas pipe joints |
| AS 4627-2005 | Quick-connect devices for gas |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 60079.10.1:2009 | Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD) |
| AS/NZS 1668.1:1998 | The use of ventilation and airconditioning in buildings Fire and smoke control in multi-compartment buildings |
| AS/NZS 2208:1996 | Safety glazing materials in buildings |
| AS 4176.8-2010 | Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD) |
| AS 2944.2-2007 | Plastics pipes and fittings for gas reticulation Polyamide fittings (Reconfirmed 2023) |
| AS 4631-2005 | Limited flexibility connectors for gas |
| AS 1668.2-2012 | The use of ventilation and airconditioning in buildings Mechanical ventilation in buildings |
| AS/NZS 4645.3:2008 | Gas distribution networks Plastics pipe systems |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS/NZS 1518:2002 | External extruded high-density polyethylene coating system for pipes (Reconfirmed 2016) |
| AS ISO 6993.1-2007 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD) |
| AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
| AS/NZS 2537.5:2011 | Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications Plastics pipes and fittings - Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels - Metric series - Specifications - Fittings for mechanical jointing (including PE-X/metal transitions) (ISO 14531-3:2006, MOD) |
| AS 4553-2008 | Gas space heating appliances |
| AS/NZS 5601.2:2013 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
| AS 2944.1-2007 | Plastics pipes and fittings for gas reticulation Polyamide pipes (Reconfirmed 2023) |
| AS/NZS 1530.3:1999 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
| AS ISO 6993.2-2007 | Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels Fittings for a maximum operating pressure of 200 mbar (20 kPa) |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 2918:2001 | Domestic solid fuel burning appliances - Installation |
| AS 10745-1998 | Information technology - Open Systems Interconnection - Upper layers security model |
| AS 2030.1-2009 | Gas cylinders General requirements |
| AS 1530.1-1994 | Methods for fire tests on building materials, components and structures Combustibility test for materials (Reconfirmed 2016) |
| AS/NZS 1167.1:2005 | Welding and brazing - Filler metals Filler metal for brazing and braze welding |
| AS 5200.053-2008 | Plumbing and drainage products Stainless steel pipes and tubes for pressure applications |
| AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
| AS 4567-2005 | Twin wall metal flues - Gas appliances (Reconfirmed 2017) |
| AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
| AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
| AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
| AS 3814-2009 | Industrial and commercial gas-fired appliances |
| AS/NZS 1734:1997 | Aluminium and aluminium alloys - Flat sheet, coiled sheet and plate (Reconfirmed 2020) |
| AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
| AS 2129-2000 | Flanges for pipes, valves and fittings (Reconfirmed 2016) |
| AS/NZS 1869:2012 | Hose and hose assemblies for liquefied petroleum gases (LP Gas), natural gas and town gas |
| AS 4629-2005 | Automatic shut off valves and vent valves (Reconfirmed 2018) |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS/NZS 2648.1:1995 | Underground marking tape Non-detectable tape (Reconfirmed 2020) |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| AS/NZS 1596:2008 | The storage and handling of LP Gas |
| AS 3959-2009 | Construction of buildings in bushfire-prone areas |
| AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
| AS 4566-2005 | Flue cowls - Gas appliances |
| AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
| AS 4621-2004 | Regulators for use with liquefied petroleum - Vapour phase |
| AS/NZS 4645.1:2008 | Gas distribution networks Network management |
| AS/NZS 4645.2:2008 | Gas distribution networks Steel pipe systems |
| AS 4621:2019 | Regulator for use with liquefied petroleum - Vapour phase |
| AS 2593:2021 | Boilers - Safety management and supervision systems |
| AS 4617:2018 | Manually operated gas valves |
| AS/NZS 4645.1:2018 | Gas distribution networks Network management |
| AS 3645:2017 | Essential requirements for gas equipment |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 4631:2018 | Semi-rigid connectors for gas |
| AS/NZS 5263.0:2017 | Gas appliances General requirements |
| AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
| AS 4670:2018 | Commercial propane and commercial butane for heating purposes |
| AS/NZS 5263.1.8:2016 | Gas appliances Decorative effect gas appliances |
| AS/NZS 5601.2:2020 | Gas installations LP Gas installations in caravans and boats for non-propulsive purposes |
| AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
| AS 4618:2019 | Gas appliance regulators |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 4114:2020 | Spray painting booths, designated spray painting areas and paint mixing rooms |
| AS/NZS 5263.1.4:2017 | Gas Appliances Radiant gas heaters |
| AS 4632:2020 | Over-pressure and under-pressure shut-off devices |
| AS 1375-2013 | Industrial fuel-fired appliances |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 1596:2014 | The storage and handling of LP Gas |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.