Skip to content
Please enter a keyword to search

  • ASTM D 6618 : 2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    Available format(s):  Hardcopy, PDF

    Superseded date:  14-07-2023

    Language(s):  English

    Published date:  13-07-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Scope - (Show below) - (Hide below)

    1.1This test method covers a four-stroke cycle diesel engine test procedure for evaluating engine oils for certain high-temperature performance characteristics, particularly ring sticking, ring and cylinder wear, and accumulation of piston deposits. Such oils include both single viscosity SAE grade and multiviscosity SAE grade oils used in diesel engines. It is commonly known as the 1M-PC test (PC for Pre-Chamber) and is used in several API oil categories, notably the CF and CF-2 and the military category described in MIL-PRF-2104 (see Note 1).

    Note 1:Companion test methods used to evaluate other engine oil performance characteristics for API oil categories CF and CF-2 are discussed in SAE J304. The companion tests used by the military can be found in MIL-PRF-2104.

    1.2The values stated in SI units are to be regarded as standard.

    1.2.1Exception—The values in parentheses are provided for information only.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    1.4This test method is arranged as follows:

    TABLE OF CONTENTS

    Scope

    1

    Reference Documents

    2

    Terminology

    3

    Summary of Test Method

    4

    Significance and Use

    5

    Apparatus

    6

    Test Engine

    6.1

    Engine Accessories

    6.2 – 6.14

    Engine Oil System

    6.15

    Cooling System

    6.16

    Fuel System

    6.17

    Intake Air System

    6.18

    Exhaust System

    6.19

    Blowby Meter

    6.20

    Thermocouples

    6.21

    Parts

    6.22

    Instrumentation

    6.23

    Crankcase Paint

    6.24

    Reagents and Materials

    7

    Fuel

    7.1

    Test Oil

    7.2

    Engine Coolant

    7.3

    Cleaning Materials

    7.4

    Safety

    8

    Preparation of Apparatus

    9

    Supplementary Service Information

    9.1

    General Engine Inspection

    9.2

    Intake Air System

    9.3

    Cooling System

    9.4

    Engine Cooling System Cleaning

    9.5

    Instrumentation Calibration Requirements

    9.6

    Engine Crankcase Cleaning

    9.7

    Additional Oil Filter

    9.8

    Flushing Procedure Components

    9.9

    Flushing Procedures

    9.10

    Piston Cleaning Preparation

    9.11

    Cylinder Head

    9.12

    Fuel Nozzle

    9.13

    Measurement

    9.14

    Procedure

    10

    Engine Break-in

    10.1

    Pre-Test Preparations

    10.2

    Warm-up Procedure

    10.3

    Operating Conditions

    10.4

    Periodic Measurements

    10.5

    Engine Oil Level

    10.6

    Oil Addition Procedure

    10.7

    Cool-Down Procedure

    10.8

    Shutdowns

    10.9

    Fuel System

    10.10

    Brake Specific Oil Consumption (BSOC) Calculation

    10.11

    Inspection

    11

    Preparation

    11.1

    Inspection

    11.2

    Rater Training

    11.3

    Referee Ratings

    11.4

    Calibration of Test Method

    12

    Requirements

    12.1

    Reference Oils

    12.2

    Test Numbering

    12.3

    Definition of a Test

    12.4

    New Laboratories and New Test Stands

    12.5

    Frequency of Calibration Tests

    12.6

    Specified Test Parameters

    12.10

    Acceptance of Calibration Tests

    12.11

    Failing Reference Oil Calibration Tests

    12.12

    Non-Standard Tests

    12.13

    Severity Adjustments and Control Charting

    12.14

    Test Reporting

    12.15

    Reporting Reference Results

    12.16

    Analysis of Reference Oils

    12.17

    Precision and Bias

    13

    Precision

    13.1

    Bias

    13.2

    Keywords

    14

    ANNEXES

    Figures and Schematics

    Annex A1

    Report Forms

    Annex A2

    Test Fuel Information

    Annex A3

    APPENDIXES

    Humidity Correction Factors

    Appendix X1

    Report Form Examples

    Appendix X2

    1M-PC Multiple Testing

    Appendix X3

    General Product Information - (Show below) - (Hide below)

    Committee D 02
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 4175 : 2020 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 5862 : 2009 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)
    ASTM D 4175 : 2014 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2425 : 2019 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 4485 : 2003 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 2622 : 1992 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 4175 : 2009 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 5844 : 1998 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)
    ASTM D 4175 : 2008 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2006 Standard Specification for Performance of Engine Oils
    ASTM D 2622 : 1987 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 4175 : 2005 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2011 : REV C Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 1319 : 1989 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
    ASTM D 4175 : 2005 : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 1319 : 2008 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4485 : 2001 Standard Specification for Performance of Engine Oils
    ASTM D 1796 : 2011 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 6202 : 2001 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
    ASTM D 4175 : 2015 : REV C Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2020 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2017 : REV A : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 613 : 2018 : REV A Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 2425 : 2004 : R2009 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 4485 : 2003 Standard Specification for Performance of Engine Oils
    ASTM D 4052 : 1996 : R2002 : EDT 1 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 86 : 2023 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 2422 : 1997 : R2007 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 6202 : 2000 : REV A Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine
    ASTM D 4485 : 2008 Standard Specification for Performance of Engine Oils
    ASTM D 664 : 2017 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 4485 : 2015 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 1319 : 2018 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4485 : 2005 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 86 : 2020 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 482 : 2013 Standard Test Method for Ash from Petroleum Products
    ASTM D 4175 : 2008 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2020 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4294 : 2010 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2500 : 2016 : REV B Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 4052 : 2018 : REV A Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1319 : 2014 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 2422 : 1997 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 4175 : 2017 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2009 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2011 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 613 : 2023 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 2422 : 1997 : R2018 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 2622 : 1998 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2500 : 2016 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 2500 : 2016 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 1319 : 1999 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 86 : 2018 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 4175 : 2022 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2018 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4175 : 2009 : REV A : EDT 4 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2009 : REV A : EDT 3 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4052 : 2009 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 235 : 2022 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)
    ASTM D 4485 : 2011 : REV B Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 2622 : 2008 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 445 : 2021 : EDT 2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 93 : 2019 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM D 4485 : 2016 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4175 : 2018 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2007 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2010 Standard Specification for Performance of Engine Oils
    ASTM D 445 : 2017 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4485 : 2001 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2001 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2020 : REV B : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1796 : 2004 : R2009 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 1319 : 2002 : REV A Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 86 : 2019 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 4175 : 2001 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2005 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2500 : 1999 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2500 : 2002 : EDT 1 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 4175 : 2022 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 2500 : 2005 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 613 : 2018 : REV A : EDT 1 Standard Test Method for Cetane Number of Diesel Fuel Oil
    ASTM D 4175 : 2002 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 86 : 2012 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
    ASTM D 1796 : 2022 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 93 : 1990 : EDT 1 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester
    ASTM D 4485 : 2004 Standard Specification for Performance of Engine Oils
    ASTM D 445 : 1988 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and the Calculation of Dynamic Viscosity)
    ASTM D 2500 : 2002 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2500 : 2011 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 2500 : 2009 Standard Test Method for Cloud Point of Petroleum Products
    ASTM D 4294 : 2008 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4485 : 2020 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 1796 : 1997 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 4175 : 2015 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2000 Standard Specification for Performance of Engine Oils
    ASTM D 4175 : 2002 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2500 : 2017 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 4052 : 2011 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1319 : 2003 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4052 : 2016 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 4485 : 2015 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4175 : 2022 : REV A : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1796 : 1997 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 664 : 1995 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 2622 : 2003 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 2425 : 1999 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 4294 : 2008 : REV A Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 1319 : 2010 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4175 : 2009 : REV A : EDT 5 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2016 : REV C Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2015 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 86 : 2020 : REV B Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 4863 : 2013 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022)
    ASTM D 2425 : 2021 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 4294 : 2002 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 4175 : 2015 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2006 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 2425 : 2004 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 86 : 2016 : REV A Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 445 : 2019 : REV A Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4175 : 2009 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 97 : 2017 : REV B Standard Test Method for Pour Point of Petroleum Products
    ASTM D 4175 : 2016 : REV B Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4863 : 2002 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    ASTM D 2500 : 2017 : REV A Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 4175 : 2002 : REV A : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2008 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4175 : 2002 : REV A Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4294 : 2016 : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4175 : 2000 : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4863 : 2010 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    ASTM D 4175 : 2016 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 445 : 2019 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4294 : 2008 : REV A : EDT 1 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4052 : 1996 Standard Test Method for Density and Relative Density of Liquids by Digital Density Meter
    ASTM D 4294 : 1998 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 235 : 2002 : R2012 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) (Withdrawn 2021)
    ASTM D 4175 : 2019 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2018 : REV A Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 2622 : 2010 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4175 : 2022 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 130 : 2018 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    ASTM D 5302 : 2001 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
    ASTM D 4863 : 2000 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    ASTM D 4485 : 2005 Standard Specification for Performance of Engine Oils
    ASTM D 4294 : 2021 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 93 : 2000 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
    ASTM D 445 : 2001 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
    ASTM D 6202 : 2002 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009)
    ASTM D 2622 : 2021 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 97 : 2017 : REV B : R2022 Standard Test Method for Pour Point of Petroleum Products
    ASTM D 664 : 2011 : REV A Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
    ASTM D 445 : 2021 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 5862 : 2006 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
    ASTM D 4485 : 2014 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 86 : 2020 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 93 : 1985 Standard Test Method for Flash Point by Pensky-Martens Closed Tester
    ASTM D 1796 : 2011 : R2016 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 4485 : 2002 Standard Specification for Performance of Engine Oils
    ASTM D 2622 : 2007 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4175 : 2017 : REV A Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2005 : EDT 1 Standard Specification for Performance of Engine Oils
    ASTM D 2622 : 1994 Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry
    ASTM D 524 : 2015 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
    ASTM D 5862 : 1999 : REV A Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
    ASTM D 2422 : 1997 : R2013 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 4175 : 2009 : REV A : EDT 2 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 2622 : 2005 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 4485 : 2022 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 4052 : 2022 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 5862 : 2003 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine
    ASTM D 4294 : 2003 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectrometry
    ASTM D 4175 : 2018 : EDT 1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4175 : 2016 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1319 : 2015 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 445 : 2018 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 4294 : 2016 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    ASTM D 1796 : 1997 : R2002 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 86 : 2015 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 2422 : 1997 : R2002 Standard Classification of Industrial Fluid Lubricants by Viscosity System
    ASTM D 2500 : 2023 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels
    ASTM D 1319 : 2013 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4863 : 2008 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    ASTM D 4052 : 2015 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 1796 : 2004 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 445 : 2021 : EDT 1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
    ASTM D 1796 : 2011 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 4175 : 2017 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 1796 : 1983 : R1990 : EDT 1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
    ASTM D 2425 : 2017 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry
    ASTM D 93 : 1997 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
    ASTM D 4175 : 2019 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
    ASTM D 4485 : 2009 Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2019 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 86 : 2017 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
    ASTM D 4175 : 2015 : REV B : EDT 1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 4485 : 2010 : REV A Standard Specification for Performance of Engine Oils
    ASTM D 4485 : 2011 Standard Specification for Performance of Engine Oils
    ASTM D 1319 : 2019 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4052 : 2018 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    ASTM D 130 : 2012 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
    ASTM D 4294 : 1990 : R1998 : EDT 1 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy
    ASTM D 1319 : 2002 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
    ASTM D 4175 : 2008 : REV B Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    ASTM D 5302 : 2000 : REV A Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
    ASTM D 4485 : 2022 : EDT 1 Standard Specification for Performance of Active API Service Category Engine Oils
    ASTM D 2622 : 2016 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry
    ASTM D 93 : 2018 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
    ASTM D 4485 : 2007 : REV A Standard Specification for Performance of Engine Oils
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective