ASTM E 631 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Terminology of Building Constructions
Available format(s)
Hardcopy , PDF
Superseded date
20-05-2024
Superseded by
Language(s)
English
Published date
17-04-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.
| Committee |
E 06
|
| DocumentType |
Reference Material
|
| Pages |
35
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This Terminology consists of terms and definitions pertaining to the subject field of buildings and building construction, and in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings.
1.2The purpose of this Terminology is to provide preferred and admitted designations along with the meanings and explanations of technical concepts applied in the subject field of buildings and construction, written for both the non-expert and the expert user.
1.3This comprehensive Terminology standard contains all ASTM standardized definitions generated in ASTM Committee E06 that are considered general in nature. Beyond this comprehensive terminology, there are also separate terminology standards that have been developed within Committee E06 by a number of technical subcommittees.
1.3.1These separate general terminologies are created relative to specific subject fields and the terminological entries have been grouped for convenient use (see Section 2 and Appendix X1). Some terminology data contained in those other subsidiary terminology standards also appear in this comprehensive standard.
1.3.2The following standards are separate terminologies that have been developed within specific E06 Subcommittees whose term entry lists are provided in Appendix X1:
| E833 | Terminology of Building Economics |
| E1480 | Terminology of Facility Management (Building-Related) |
| E1481 | Terminology of Railing Systems and Rails for Buildings |
| E1605 | Terminology Relating to Lead in Buildings |
| E1749 | Terminology Relating to Rigid Wall Relocatable Shelters |
| E2110 | Terminology for Exterior Insulation and Finish Systems (EIFS) |
| E2151 | Terminology of Guides for Specifying and Evaluating Performance |
| E2265 | Terminology for Anchors and Fasteners in Concrete and Masonry |
1.4Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order. To show the relationships in certain families of concepts, groups of narrower terms and their definitions are grouped under the definition of the broader term. Each such sub-entry is listed also (in italics) with a cross-reference to the special class.
1.5Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition, and is listed in Section 2.
| ASTM E 1668 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff |
| ASTM E 1155/E1155M : 2023 | Standard Test Method for Determining <emph type="ital">F<inf>F</inf></emph> Floor Flatness and <emph type="ital">F<inf>L</inf></emph> Floor Levelness Numbers |
| ASTM F 2078 : 2022 | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ASTM E 546 : 2014 : R2020 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
| ASTM E 2620 : 2015 : R2020 | Standard Classification for Program and Project Estimate Summaries |
| ASTM E 1233/E1233M : 2014 : R2021 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential |
| ASTM D 779 : 2016 : R2022 | Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method |
| ASTM E 2321 : 2003 : R2019 | Standard Practice for Use of Test Methods <astmref rid="a00002"/> for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 2396/E2396M : 2019 | Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems |
| ASTM E 1399/E1399M : 1997 : R2022 | Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems |
| ASTM C 1815 : 2017 : R2021 | Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension |
| ASTM E 2307 : 2023 : REV B | Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus |
| ASTM E 3369 : 2024 | Standard Specification for Determining the Flood Damage Resistance Rating of Building Materials |
| ASTM E 695 : 2022 | Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading |
| ASTM E 2780 : 2010 : R2017 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters |
| ASTM E 1105 : 2015 : R2023 | Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference |
| ASTM E 455 : 2019 | Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings |
| ASTM E 917 : 2017 : R2023 | Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems |
| ASTM E 987 : 1988 : R2017 | Standard Test Methods for Deglazing Force of Fenestration Products |
| ASTM E 1670 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance |
| ASTM E 990 : 2021 | Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels |
| ASTM E 1494 : 2018 | Standard Practice for Testing Physical Properties of Friable Surfacing Materials |
| ASTM E 1513/E1513M : 1993 : R2023 | Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs) |
| ASTM C 1564 : 2020 | Standard Guide for Use of Silicone Sealants for Protective Glazing Systems |
| ASTM E 2635 : 2022 | Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation |
| ASTM E 1369 : 2015 : R2020 : EDT 1 | Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems |
| ASTM E 1793 : 2019 | Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters |
| ASTM E 3036 : 2015 : R2021 | Standard Guide for Notating Facade Conditions in the Field |
| ASTM D 4477 : 2024 | Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit |
| ASTM E 1556 : 2020 | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| ASTM E 2359/E2359M : 2013 : R2023 | Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly |
| ASTM E 2190 : 2019 | Standard Specification for Insulating Glass Unit Performance and Evaluation |
| ASTM E 331 : 2000 : R2023 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 998 : 2019 | Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads |
| ASTM E 2785 : 2014 : R2022 | Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions |
| ASTM E 1074 : 2015 : R2020 : EDT 1 | Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems |
| ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
| ASTM E 2432 : 2023 | Standard Guide for General Principles of Sustainability Relative to the Built Environment |
| ASTM E 2925 : 2019 : REV A | Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function |
| ASTM E 1669 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding<rangeref></rangeref > |
| ASTM F 3006 : 2020 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| ASTM D 3679 : 2024 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding |
| ASTM F 3561 : 2023 | Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack |
| ASTM E 2558 : 2013 : R2021 | Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces |
| ASTM E 2844 : 2023 | Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit |
| ASTM E 2032 : 2021 | Standard Practice for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119 |
| ASTM E 1993/E1993M : 1998 : R2020 | Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs |
| ASTM E 3075 : 2018 | Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance |
| ASTM D 3841 : 2021 | Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels |
| ASTM E 2168 : 2010 : R2023 | Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating |
| ASTM E 1664 : 2019 | Standard Classification for Serviceability of an Office Facility for Layout and Building Factors<rangeref></rangeref > |
| ASTM E 1886 : 2019 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM E 1748 : 1995 : R2017 | Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System |
| ASTM E 2174 : 2020 : REV A | Standard Practice for On-Site Inspection of Installed Firestop Systems |
| ASTM E 2786 : 2010 : R2019 | Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems |
| ASTM E 283/E283M : 2019 | Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 2270 : 2014 : R2019 | Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions |
| ASTM E 2399/E2399M : 2019 | Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems |
| ASTM E 1996 : 2023 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 3118/E3118M : 2022 | Standard Test Methods to Evaluate Seismic Performance of Suspended Ceiling Systems by Full-Scale Dynamic Testing |
| ASTM C 1642 : 2020 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
| ASTM E 2813 : 2024 | Standard Practice for Building Enclosure Commissioning |
| ASTM C 1715/C1715M : 2022 | Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems |
| ASTM E 2269 : 2021 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography |
| ASTM E 1424 : 2022 | Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen |
| ASTM C 1764 : 2020 | Standard Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 1971 : 2019 | Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings |
| ASTM E 1662 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment |
| ASTM E 241 : 2020 | Standard Guide for Limiting Water-Induced Damage to Buildings |
| ASTM E 3223/E3223M : 2020 | Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mockups in New Construction |
| ASTM E 865 : 2020 | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM E 2189 : 2019 | Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units |
| ASTM E 3087 : 2018 | Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods |
| ASTM E 1701 : 1995 : R2018 | Standard Classification for Serviceability of an Office Facility for Manageability |
| ASTM E 547 : 2000 : R2016 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference |
| ASTM E 2204 : 2015 : R2020 : EDT 1 | Standard Guide for Summarizing the Economic Impacts of Building-Related Projects |
| ASTM E 1307 : 2018 | Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels |
| ASTM E 970 : 2023 | Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source |
| ASTM E 2817 : 2011 : R2018 | Standard Test Method for Test Fueling Masonry Heaters |
| ASTM E 964 : 2015 : R2020 : EDT 1 | Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems |
| ASTM E 2837 : 2023 : REV A | Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies |
| ASTM E 2126 : 2019 | Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings |
| ASTM E 3037 : 2020 | Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems |
| ASTM E 3157 : 2023 | Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems |
| ASTM E 2134/E2134M : 2014 : R2018 | Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS) |
| ASTM E 2356 : 2018 | Standard Practice for Comprehensive Building Asbestos Surveys |
| ASTM E 2271/E2271M : 2022 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings |
| ASTM E 2320 : 2019 | Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions |
| ASTM E 1190 : 2021 | Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members |
| ASTM E 2618 : 2013 : R2019 | Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances |
| ASTM E 2649 : 2020 | Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy |
| ASTM E 2398/E2398M : 2019 | Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems |
| ASTM E 3054/E3054M : 2023 | Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes |
| ASTM E 2358 : 2024 | Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades |
| ASTM E 1509 : 2022 | Standard Specification for Room Heaters, Pellet Fuel-Burning Type |
| ASTM E 3008/E3008M : 2016 : R2023 | Standard Classification for Transportation Surface Elements—UNIFORMAT II |
| ASTM E 575 : 2005 : R2018 | Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies |
| ASTM E 1637 : 1998 : R2017 : EDT 1 | Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems |
| ASTM E 3130 : 2021 | Standard Guide for Developing Cost-Effective Community Resilience Strategies |
| ASTM F 842 : 2017 : R2023 | Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact |
| ASTM E 2874 : 2023 | Standard Test Method for Determining the Fire-Test Response Characteristics of a Building Spandrel-Panel Assembly Due to External Spread of Fire |
| ASTM E 3121/E3121M : 2017 | Standard Test Methods for Field Testing of Anchors in Concrete or Masonry |
| ASTM E 1851 : 2021 | Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures |
| ASTM E 1998 : 2011 : R2018 | Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances |
| ASTM E 1665 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Facility Protection |
| ASTM E 2268 : 2004 : R2023 | Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference |
| ASTM E 2226 : 2023 : REV A | Standard Practice for Application of Hose Stream |
| ASTM E 1661 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness |
| ASTM E 2112 : 2023 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
| ASTM E 2751/E2751M : 2021 | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
| ASTM E 1666 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions |
| ASTM E 2777 : 2020 | Standard Guide for Vegetative (Green) Roof Systems |
| ASTM C 1401 : 2023 | Standard Guide for Structural Sealant Glazing |
| ASTM E 3193 : 2023 | Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM C 1788 : 2020 | Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 2336 : 2020 | Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems |
| ASTM E 2353 : 2021 | Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades |
| ASTM E 1783/E1783M : 2024 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM C 1851 : 2018 : R2023 | Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus |
| ASTM E 1773 : 2018 | Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants |
| ASTM E 1555 : 2020 | Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair |
| ASTM E 2430/E2430M : 2019 | Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”) |
| ASTM E 2570/E2570M : 2007 : R2019 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM E 1826 : 2023 | Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E 3026 : 2023 : EDT 1 | Standard Guide for Readily Observable Moisture Affected Materials and Conditions Conducive to Elevated Moisture in Commercial Buildings: Limited Moisture Assessment Process |
| ASTM E 1804 : 2016 : R2023 | Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project |
| ASTM E 2816 : 2020 : REV A | Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems |
| ASTM E 3119 : 2019 | Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing |
| ASTM E 1091 : 2021 | Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels |
| ASTM E 2099 : 2023 | Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems |
| ASTM E 1800 : 2021 | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels |
| ASTM D 7338 : 2014 : R2023 | Standard Guide for Assessment Of Fungal Growth in Buildings |
| ASTM E 2912 : 2017 | Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction |
| ASTM E 2514 : 2015 : R2020 | Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses |
| ASTM E 2511 : 2017 : R2023 | Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies |
| ASTM E 3120 : 2019 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
| ASTM E 1646 : 1995 : R2018 | Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference |
| ASTM E 196 : 2006 : R2018 | Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs |
| ASTM E 2128 : 2020 | Standard Guide for Evaluating Water Leakage of Building Walls |
| ASTM E 741 : 2023 | Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution |
| ASTM F 3038 : 2021 | Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems |
| ASTM E 2026 : 2016 : REV A | Standard Guide for Seismic Risk Assessment of Buildings |
| ASTM E 2395 : 2021 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact |
| ASTM E 1694 : 2022 | Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies |
| ASTM E 2013 : 2020 | Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study |
| ASTM E 2150 : 2017 | Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure |
| ASTM E 576 : 2014 : R2020 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
| ASTM E 605/E605M : 2019 : R2023 | Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM E 2969 : 2018 | Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction |
| ASTM E 1258 : 2023 | Standard Test Method for Airflow Calibration of Fan Pressurization Devices |
| ASTM C 1589/C1589M : 2018 : R2023 | Standard Practice for Outdoor Weathering of Construction Seals and Sealants |
| ASTM E 1976 : 2019 | Standard Specification for Shelter, Tactical, Nonexpandable |
| ASTM C 1795 : 2017 : R2024 | Standard Test Methods for High-Temperature Characterization of Gypsum Boards and Panels |
| ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
| ASTM E 3203 : 2021 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 2843 : 2017 | Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets |
| ASTM E 1745 : 2017 : R2023 | Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs |
| ASTM D 8052/D8052M : 2022 | Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies |
| ASTM E 1801 : 2021 | Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters |
| ASTM E 2178 : 2021 : REV A | Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials |
| ASTM E 2140 : 2001 : R2023 | Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head |
| ASTM E 2397/E2397M : 2019 | Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems |
| ASTM E 1836/E1836M : 2009 : R2016 | Standard Practice for Building Floor Area Measurements for Facility Management |
| ASTM E 1857 : 1997 : R2021 | Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces |
| ASTM E 2957 : 2017 | Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections |
| ASTM E 1368 : 2023 | Standard Practice for Visual Inspection of Asbestos Abatement Projects |
| ASTM E 783 : 2002 : R2018 | Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors |
| ASTM E 3158 : 2018 | Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building |
| ASTM E 2319 : 2022 | Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen |
| ASTM E 935 : 2021 | Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 2924 : 2014 : R2020 | Standard Practice for Intumescent Coatings |
| ASTM E 2778 : 2014 : R2021 | Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves) |
| ASTM E 2098/E2098M : 2013 : R2023 | Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution |
| ASTM E 2393 : 2020 : REV A | Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers |
| ASTM E 1583 : 2021 : REV A | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM E 1660 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Support for Office Work |
| ASTM E 2322 : 2022 | Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction |
| ASTM E 1057 : 2015 : R2020 : EDT 1 | Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems |
| ASTM E 2121 : 2021 | Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings |
| ASTM E 2947 : 2021 : REV A | Standard Guide for Building Enclosure Commissioning |
| ASTM E 2127 : 2001 : REV A : R2022 | Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction |
| ASTM E 866 : 2023 | Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E 2129 : 2018 | Standard Practice for Data Collection for Sustainability Assessment of Building Products |
| ASTM F 2912 : 2017 | Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM E 1699 : 2014 : R2020 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
| ASTM D 1356 : 2020 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 3053 : 2018 : EDT 2 | Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel |
| ASTM E 2166 : 2016 : R2023 | Standard Practice for Organizing and Managing Building Data |
| ASTM E 1803 : 2014 : R2022 | Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels |
| ASTM E 2342/E2342M : 2010 : R2020 | Standard Test Method for Durability Testing of Duct Sealants |
| ASTM E 154/E154M : 2008 : REV A : R2019 | Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover |
| ASTM E 2954 : 2015 : R2022 | Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members |
| ASTM E 2691 : 2020 | Standard Practice for Job Productivity Measurement |
| ASTM E 3372 : 2023 | Standard Guide for Schedule Performance Index, Schedule Beta (β<inf>s</inf >) |
| ASTM E 529 : 2004 : R2018 | Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction |
| ASTM E 2114 : 2023 | Standard Terminology for Sustainability |
| ASTM E 1121 : 2015 : R2020 : EDT 1 | Standard Practice for Measuring Payback for Investments in Buildings and Building Systems |
| ASTM E 2841 : 2019 | Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions |
| ASTM E 3074/E3074M : 2024 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities |
| ASTM E 2029 : 2011 : R2019 | Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution |
| ASTM E 894 : 2023 | Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 2188 : 2019 | Standard Test Method for Insulating Glass Unit Performance |
| ASTM C 1249 : 2018 : R2023 | Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications |
| ASTM E 1794 : 2022 : REV A | Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels |
| ASTM E 1667 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants |
| ASTM D 6630/D6630M : 2016 : R2022 | Standard Guide for Low-Slope Insulated Roof Membrane Assembly Performance |
| ASTM E 1975 : 2022 | Standard Specification for Shelter, Electrical, Equipment S-280/G |
| ASTM C 1735 : 2017 : R2021 | Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation |
| ASTM E 1612/E1612M : 1994 : R2022 | Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures |
| ASTM E 3385 : 2024 | Standard Practice for On-Site Inspection of Fire Resistive Duct Systems |
| ASTM C 1787 : 2023 | Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications |
| ASTM E 3127 : 2024 | Standard Guide for Specifying Water Vapor Transmission Material Properties of Water-Resistive Barriers and Air Barriers |
| ASTM E 661 : 2022 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads |
| ASTM E 1966 : 2015 : R2019 | Standard Test Method for Fire-Resistive Joint Systems |
| ASTM E 2004 : 2018 | Standard Test Method for Facing Cleavage of Sandwich Panels |
| ASTM F 588 : 2017 : R2023 | Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact |
| ASTM E 564 : 2006 : R2018 | Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM E 1693 : 1995 : R2018 | Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets<rangeref></rangeref > |
| ASTM E 937/E937M : 1993 : R2023 | Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members |
| ASTM C 1925/C1925M : 2024 | Standard Test Method for Strength Properties of Direct Hung, Suspended T-bar Type Ceiling System Components Intended to Receive Gypsum Panel Products |
| ASTM E 2485/E2485M : 2013 : R2018 | Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings |
| ASTM E 2141 : 2021 | Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units |
| ASTM E 1671 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Cleanliness |
| ASTM E 1425 : 2014 : R2023 | Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems |
| ASTM E 2556/E2556M : 2010 : R2022 | Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment |
| ASTM E 2750 : 2023 | Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814 |
| ASTM E 2462 : 2018 | Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I |
| ASTM E 2513 : 2007 : R2019 : EDT 1 | Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems |
| ASTM E 1680 : 2016 : R2022 | Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems |
| ASTM E 2779 : 2010 : R2017 | Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters |
| ASTM E 1825 : 2021 | Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems |
| ASTM E 985 : 2024 | Standard Specification for Permanent Metal Railing Systems and Rails for Buildings |
| ASTM E 1514 : 1998 : R2023 : EDT 1 | Standard Specification for Structural Standing Seam Steel Roof Panel Systems |
| ASTM E 2461 : 2022 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM E 2115 : 2022 | Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities |
| ASTM E 405 : 2004 : R2018 | Standard Test Methods for Wear Testing Rotary Operators for Windows |
| ASTM E 1692 : 1995 : REV A : R2018 | Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants |
| ASTM E 2486/E2486M : 2022 | Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 330/E330M : 2014 : R2021 | Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference |
| ASTM E 488/E488M : 2022 | Standard Test Methods for Strength of Anchors in Concrete Elements |
| ASTM E 2357 : 2024 | Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies |
| ASTM E 1300 : 2024 | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM E 2506 : 2015 : R2020 : EDT 1 | Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities |
| ASTM E 1765 : 2016 : R2023 | Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes |
| ASTM E 2619/E2619M : 2017 | Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings |
| ASTM E 864 : 2020 | Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels |
| ASTM E 2260 : 2021 : REV A | Standard Guide for Repointing (Tuckpointing) Historic Masonry |
| ASTM E 3069 : 2019 : REV A | Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall |
| ASTM E 2517 : 2021 | Standard Specification for Cargo Bed Cover, Type III (M35A2, 2<fraction><num>1</num><den >2</den></fraction> Ton Cargo Truck/M1078, 2<fraction><num>1</num><den >2</den></fraction> Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2<fraction><num>1</num><den>2</den></fraction> Ton LMTV Trailer) |
| ASTM D 7186 : 2014 : R2021 | Standard Practice for Quality Assurance Observation of Roof Construction and Repair |
| ASTM E 2913/E2913M : 2021 | Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples |
| ASTM D 3678 : 2019 | Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions |
| ASTM E 2392/E2392M : 2023 | Standard Guide for Design of Earthen Wall Building Systems |
| ASTM E 1663 : 2022 | Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology |
| ASTM E 1185 : 2015 : R2020 : EDT 1 | Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems |
| ASTM D 7254 : 2021 | Standard Specification for Polypropylene (PP) Siding |
| ASTM C 1892/C1892M : 2022 | Standard Test Methods for Strength of Anchors in Masonry |
| ASTM E 3038 : 2022 : REV A | Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems |
| ASTM C 1199 : 2022 | Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods |
| ASTM E 3350 : 2022 | Standard Guide for Community Resilience Planning for Buildings and Infrastructure |
| ASTM E 1946 : 2018 : R2023 | Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects |
| ASTM E 1700 : 2016 | Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope<rangeref></rangeref > |
| ASTM D 4803 : 2024 | Standard Test Method for Predicting Heat Buildup in PVC Building Products |
| ASTM E 2264 : 2023 | Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products |
| ASTM E 2068 : 2000 : R2022 | Standard Test Method for Determination of Operating Force of Sliding Windows and Doors |
| ASTM D 5206 : 2024 | Standard Test Method for Windload Resistance of Rigid Plastic Siding |
| ASTM E 2921 : 2022 | Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems |
| ASTM E 2266 : 2022 | Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion |
| ASTM E 2431 : 2012 : R2020 | Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings |
| ASTM E 1792 : 2003 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 1566 : 2004 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1749 : 2000 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 1423 : 2021 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 1925 : 2010 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
| ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1566 : 2009 | Standard Terminology Relating to Rubber |
| ASTM E 1775 : 2001 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 2864 : 2009 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1792 : 2003 : R2011 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1480 : 1992 : R2013 | Standard Terminology of Facility Management (Building-Related) |
| ASTM D 1566 : 2006 | Standard Terminology Relating to Rubber |
| ASTM E 1796 : 1997 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1918 : 2021 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM D 1566 : 2008 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1792 : 2001 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 1566 : 2021 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1726 : 2001 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1792 : 2003 : R2016 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
| ASTM E 1677 : 2019 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls |
| ASTM E 2151 : 2002 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
| ASTM E 1480 : 1992 : R2022 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 1644 : 2021 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 1679 : 2013 : R2019 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
| ASTM G 40 : 2021 | Standard Terminology Relating to Wear and Erosion |
| ASTM C 859 : 2023 | Standard Terminology Relating to Nuclear Materials |
| ASTM E 1186 : 2003 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 2151 : 2001 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings |
| ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM F 412 : 2020 : REV A | Standard Terminology Relating to Plastic Piping Systems |
| ASTM E 1753 : 2001 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 1480 : 1992 : R2004 | Standard Terminology of Facility Management (Building-Related) |
| ASTM F 412 : 2021 | Standard Terminology Relating to Plastic Piping Systems |
| ASTM E 1677 : 1995 : R2000 | Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls |
| ASTM D 1356 : 2015 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 456 : 2002 | Standard Terminology for Relating to Quality and Statistics |
| ASTM D 1566 : 2005 | Standard Terminology Relating to Rubber |
| ASTM D 4538 : 2005 : EDT 1 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM E 344 : 2018 | Terminology Relating to Thermometry and Hydrometry |
| ASTM E 1645 : 2001 : R2007 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1753 : 1995 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 2271 : 2005 : REV A : R2012 : EDT 1 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities |
| ASTM E 1186 : 1998 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Retarder Systems |
| ASTM C 859 : 2014 : REV B | Standard Terminology Relating to Nuclear Materials |
| ASTM E 1925 : 2004 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
| ASTM E 1699 : 2000 : R2005 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
| ASTM E 1423 : 1999 | Standard Practice for Determining the Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 1699 : 2010 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects <a href="#fn00002"></a> |
| ASTM D 4538 : 2005 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM E 2110 : 2003 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 1645 : 2020 : REV A | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM D 1566 : 2002 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 2271 : 2004 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 1753 : 2019 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 1481 : 2000 : REV A : R2008 | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 456 : 2013 : REV A : R2022 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 2265 : 2009 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 1729 : 2020 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1775 : 2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 1186 : 2003 : R2009 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 1554/E1554M : 2013 : R2023 | Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization |
| ASTM E 1749 : 2018 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 344 : 2001 : REV A | Terminology Relating to Thermometry and Hydrometry |
| ASTM E 833 : 2014 | Standard Terminology of Building Economics |
| ASTM E 1827 : 1996 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 1796 : 2003 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 456 : 2013 : REV A : R2022 : EDT 1 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1644 : 2004 : R2012 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 1566 : 2007 | Standard Terminology Relating to Rubber |
| ASTM D 2864 : 2017 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM D 1566 : 2019 | Standard Terminology Relating to Rubber |
| ASTM E 1613 : 2012 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021) |
| ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 1566 : 2015 | Standard Terminology Relating to Rubber |
| ASTM E 1979 : 2004 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM D 1356 : 2017 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1645 : 1994 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1783/E1783M : 2024 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 1699 : 2000 | Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems |
| ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
| ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM D 907 : 2015 | Standard Terminology of Adhesives |
| ASTM D 883 : 2020 : REV B | Standard Terminology Relating to Plastics |
| ASTM D 1566 : 2008 | Standard Terminology Relating to Rubber |
| ASTM E 1726 : 2021 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1796 : 2024 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1729 : 1999 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1605 : 2001 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1728 : 1999 | Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1553 : 1993 | Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002) |
| ASTM E 1827 : 2011 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 1753 : 2018 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM D 4538 : 2015 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM E 2265 : 2017 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM D 1566 : 2005 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1645 : 2016 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1645 : 2001 | Standard Practice for the Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1792 : 2020 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 833 : 2014 : R2021 | Standard Terminology of Building Economics |
| ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 5 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1677 : 2011 | Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls |
| ASTM E 997 : 2015 : R2021 | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
| ASTM E 1727 : 2005 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination (Withdrawn 2014) |
| ASTM D 1356 : 2015 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 2239 : 2012 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 1753 : 2022 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 1908 : 1997 | Standard Guide for Sample Selection of Debris waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) testing for Leachable Lead (Pb) |
| ASTM E 1979 : 2012 : R2016 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1753 : 2018 : REV A | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
| ASTM D 1566 : 2006 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1726 : 2001 : R2009 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 2864 : 2006 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM D 1566 : 2003 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 1679 : 1995 : R2012 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
| ASTM E 2110 : 2017 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 1729 : 2004 | Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1908 : 2003 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
| ASTM E 1423 : 2014 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM E 2271 : 2005 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 2265 : 2008 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM E 1726 : 2020 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 2239 : 2012 : R2016 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 1605 : 2000 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1645 : 2021 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1729 : 2016 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1728 : 2016 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1753 : 2013 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM E 1605 : 2018 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1566 : 2006 : REV B | Standard Terminology Relating to Rubber |
| ASTM E 1605 : 2018 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1908 : 2010 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
| ASTM E 2265 : 2007 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM E 1613 : 1999 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM D 907 : 2015 : R2023 | Standard Terminology of Adhesives |
| ASTM E 2110 : 2009 : EDT 1 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 2265 : 2006 : REV B | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM D 1356 : 2014 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1796 : 2003 : R2016 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1727 : 2020 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1727 : 1999 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM E 1979 : 2017 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1605 : 2001 : REV A | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1566 : 2005 : REV B | Standard Terminology Relating to Rubber |
| ASTM D 2864 : 2010 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1728 : 2002 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 2271 : 2005 : REV A | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 1792 : 2002 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM D 4214 : 1998 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films (Withdrawn 2007) |
| ASTM E 2265 : 2004 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM E 2265 : 2004 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM C 859 : 2022 | Standard Terminology Relating to Nuclear Materials |
| ASTM G 40 : 2021 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM E 1729 : 2005 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination (Withdrawn 2014) |
| ASTM E 1979 : 2012 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1796 : 2020 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM D 2864 : 2002 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM C 859 : 2022 : REV A | Standard Terminology Relating to Nuclear Materials |
| ASTM D 2864 : 2000 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM D 1566 : 2011 | Standard Terminology Relating to Rubber |
| ASTM E 1749 : 2005 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 1783/E1783M : 1996 : R2017 | Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures |
| ASTM E 1605 : 2003 : EDT 1 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 1566 : 2021 | Standard Terminology Relating to Rubber |
| ASTM E 1925 : 2018 | Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM D 4214 : 2007 : R2015 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM E 1480 : 1992 : R1998 : EDT 1 | Standard Terminology of Facility Management (Building-Related) |
| ASTM E 1728 : 2010 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1679 : 1995 : R1999 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
| ASTM D 4214 : 2007 | Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films |
| ASTM E 2265 : 2003 | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM D 1566 : 2000 : REV B | Standard Terminology Relating to Rubber |
| ASTM E 1481 : 2000 : REV A : R2014 : EDT 1 | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM D 2864 : 2021 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM D 1356 : 2015 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1729 : 2024 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1481 : 2000 : REV A : R2021 | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 1918 : 2016 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM D 1356 : 2005 : R2010 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1566 : 2014 | Standard Terminology Relating to Rubber |
| ASTM E 1827 : 2011 : R2017 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 73 : 2013 : R2021 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 1918 : 2006 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM E 1679 : 1995 : R2005 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility |
| ASTM E 1979 : 2021 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1775 : 2007 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM G 40 : 2022 | Standard Terminology Relating to Wear and Erosion |
| ASTM D 4538 : 2021 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 4538 : 2013 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM D 1566 : 2010 | Standard Terminology Relating to Rubber |
| ASTM E 1605 : 2003 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1613 : 2004 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 1677 : 2023 | Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls |
| ASTM D 1356 : 2020 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1925 : 2001 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
| ASTM G 40 : 2022 : REV A | Standard Terminology Relating to Wear and Erosion |
| ASTM E 1605 : 2018 : REV B | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2239 : 2003 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM D 2864 : 2010 : EDT 1 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1792 : 2001 : EDT 1 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1334 : 1995 : R2005 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
| ASTM E 1186 : 2017 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 1827 : 2022 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 1677 : 2005 | Standard Specification for an Air Retarder (AR) Material or System for Low-Rise Framed Building Walls |
| ASTM D 1356 : 2000 : REV A | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 1827 : 1996 : R2002 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 1605 : 2004 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2110 : 2011 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ASTM D 1566 : 2003 | Standard Terminology Relating to Rubber |
| ASTM E 1749 : 2010 | Standard Terminology Relating to Rigid Wall Relocatable Shelters |
| ASTM E 1644 : 2004 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 1356 : 2014 : REV B | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 1566 : 2000 | Standard Terminology Relating to Rubber |
| ASTM E 1828 : 2001 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint (Withdrawn 2010) |
| ASTM E 1727 : 2004 | Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques |
| ASTM D 1356 : 2014 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM E 73 : 1983 : R1996 : EDT 1 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
| ASTM D 2864 : 2019 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1979 : 1998 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM E 1775 : 1996 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM E 73 : 2013 | Standard Practice for Static Load Testing of Truss Assemblies |
| ASTM E 2239 : 2004 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 1644 : 1998 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 997 : 2015 | Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing |
| ASTM E 1726 : 2016 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1828 : 1996 | Standard Practice for Evaluating the Performance Characteristics of Qualitative Chemical Spot Test Kits for Lead in Paint |
| ASTM E 1423 : 2006 | Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems |
| ASTM D 4538 : 1995 | Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities |
| ASTM E 1679 : 2013 | Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed |
| ASTM E 1775 : 2007 : R2016 | Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead |
| ASTM D 2864 : 2007 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1727 : 2024 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1792 : 1996 : REV A | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1699 : 2014 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
| ASTM E 1605 : 2001 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2265 : 2005 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM D 1566 : 2020 | Standard Terminology Relating to Rubber |
| ASTM E 1726 : 1995 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM D 123 : 2001 | Standard Terminology Relating to Textiles |
| ASTM D 1566 : 2007 : REV A | Standard Terminology Relating to Rubber |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 4 | Standard Terminology Relating to Quality and Statistics |
| ASTM G 40 : 2017 | Standard Terminology Relating to Wear and Erosion |
| ASTM E 456 : 2013 : REV A : R2017 : EDT 6 | Standard Terminology Relating to Quality and Statistics |
| ASTM E 1644 : 2004 : R2016 : EDT 1 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 1566 : 2005 : REV C | Standard Terminology Relating to Rubber |
| ASTM E 1481 : 2000 : REV A | Standard Terminology of Railing Systems and Rails for Buildings |
| ASTM E 2110 : 2000 | Standard Terminology for Exterior Insulation and Finish Systems (EIFS) |
| ASTM E 1753 : 2004 | Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films |
| ASTM D 1356 : 2005 | Standard Terminology Relating to Sampling and Analysis of Atmospheres |
| ASTM D 2864 : 2020 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 2265 : 2006 : REV A | Standard Terminology for Anchors and Fasteners in Concrete and Masonry |
| ASTM E 1605 : 2004 : R2012 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 2271 : 2003 | Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single-Family Dwellings and Child-Occupied Facilities |
| ASTM E 1727 : 2016 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1605 : 2002 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1827 : 1996 : R2007 | Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door |
| ASTM E 1728 : 2003 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 1918 : 1997 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field (Withdrawn 2006) |
| ASTM E 1918 : 2006 : R2015 | Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field |
| ASTM D 1566 : 2010 : EDT 1 | Standard Terminology Relating to Rubber |
| ASTM E 1699 : 2013 | Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes |
| ASTM E 2151 : 2002 : R2010 | Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings (Withdrawn 2019) |
| ASTM E 1792 : 2024 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM E 1334 : 1995 : R1999 | Standard Practice for Rating the Serviceability of a Building or Building-Related Facility |
| ASTM E 1796 : 2003 : R2011 : EDT 1 | Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings |
| ASTM E 1925 : 1999 | Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures |
| ASTM E 1908 : 2016 | Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb) |
| ASTM D 2864 : 2017 | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM E 1645 : 2001 : R2016 : EDT 1 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1186 : 2022 | Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems |
| ASTM E 2239 : 2002 | Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities |
| ASTM E 997 : 1984 : R1992 : EDT 1 | Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods |
| ASTM D 2864 : 2021 : REV A | Standard Terminology Relating to Electrical Insulating Liquids and Gases |
| ASTM D 1566 : 2008 : REV B | Standard Terminology Relating to Rubber |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.