BS EN 1995-1-1 : 2012
Current
Current
The latest, up-to-date edition.
EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2012
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
SECTION 1: GENERAL
SECTION 2: BASIS OF DESIGN
SECTION 3: MATERIAL PROPERTIES
SECTION 4: DURABILITY
SECTION 5: BASIS OF STRUCTURAL ANALYSIS
SECTION 6: ULTIMATE LIMIT STATES
SECTION 7: SERVICEABILITY LIMIT STATES
SECTION 8: CONNECTIONS WITH METAL FASTENERS
SECTION 9: COMPONENTS AND ASSEMBLIES
SECTION 10: STRUCTURAL DETAILING AND CONTROL
ANNEX A (INFORMATIVE): BLOCK SHEAR AND PLUG SHEAR FAILURE
AT MULTIPLE DOWEL-TYPE STEEL-TO-TIMBER CONNECTIONS
ANNEX B (INFORMATIVE): MECHANICALLY JOINTED BEAMS
ANNEX C (INFORMATIVE): BUILT-UP COLUMNS
ANNEX D (INFORMATIVE): BIBLIOGRAPHY
Describes the rules for timber structures together with specific design rules for buildings.
| Committee |
B/525/5
|
| DevelopmentNote |
Supersedes DD ENV 1995-1.1. (12/2004) National Annex of this document is also available. See BS EN 1995-1-1 NA (10/2006) Supersedes BS 5268-3(2006). (04/2010) Also available as part of BS KIT 209. (08/2010) Supersedes BS 5268-6.1(1996), BS 5268-6.2(2001), BS 5268-7.1(1989), BS 5268-7.2(1989), BS 5268-7.3(1989), BS 5268-7.4(1989), BS 5268-7.5(1990), BS 5268-7.6(1990) and BS 5268-7.7(1990) & BS 5268-2(2002). (04/2011) 2004 Edition Re-Issued in May 2014 & incorporates AMD 2 2014. (06/2014)
|
| DocumentType |
Standard
|
| Pages |
134
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| I.S. EN 1995-1-1:2005 | Identical |
| NF EN 1995-1-1 : 2005 AMD 2 2014 | Identical |
| NEN EN 1995-1-1 : 2011 C1 2012 | Identical |
| DIN EN 1995-1-1:2010-12 | Identical |
| UNI EN 1995-1-1 : 2014 | Identical |
| UNE-EN 1995-1-1:2016 | Identical |
| NS EN 1995-1-1 : 2004 AMD 2 2014 | Identical |
| BS EN 50341-2-9 : 2017 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
| BS 6037-1:2017 | Planning, design, installation and use of permanently installed access equipment. Code of practice Suspended access equipment |
| 11/30238046 DC : 0 | BS 4978:2007+A1 - VISUAL STRENGTH GRADING OF SOFTWOOD SPECIFICATION |
| 13/30274184 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
| 15/30253829 DC : 0 | BS 3632 - RESIDENTIAL PARK HOMES - SPECIFICATION |
| DEFSTAN 81-41(PT2)/7(2014) : 2014 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| 14/30277336 DC : 0 | BS 8605-1 - EXTERNAL TIMBER CLADDING - PART 1: METHOD OF SPECIFYING |
| 11/30228295 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING, OPERATION AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 17/30342710 DC : 0 | BS EN ISO 12215-5 - SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| BS EN 1995-2 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 2: BRIDGES |
| 17/30342093 DC : 0 | BS 6037-1 - PLANNING, DESIGN, INSTALLATION AND USE OF PERMANENTLY INSTALLED ACCESS EQUIPMENT - CODE OF PRACTICE - PART 1: SUSPENDED ACCESS EQUIPMENT |
| ISO 12215-5:2008 | Small craft Hull construction and scantlings Part 5: Design pressures for monohulls, design stresses, scantlings determination |
| CSA ISO 19901-3 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
| DEFSTAN 81-41(PT2)/8(2015) : 2015 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| BS EN ISO 19901-3:2014 | Petroleum and natural gas industries. Specific requirements for offshore structures Topsides structure |
| I.S. EN ISO 19901-3:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE (ISO 19901-3:2014) |
| BS 1139-6:2014 | Metal scaffolding Prefabricated tower scaffolds outside the scope of BS EN 1004, but utilizing components from such systems. Specification |
| BS 5502-22(2003) : 2003 | BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
| BS 5756(2007) : 2007 | VISUAL STRENGTH GRADING OF TEMPERATE HARDWOOD - SPECIFICATION |
| BS 1133-8(2011) : 2011 | PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES |
| BS 4978(2007) : 2007 | VISUAL STRENGTH GRADING OF SOFTWOOD - SPECIFICATION |
| BS 8558:2015 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 5974:2017 | Planning, design, setting up and use of temporary suspended access equipment. Code of practice |
| 11/30238044 DC : 0 | BS 5756:2007+A1 - VISUAL GRADING OF HARDWOOD SPECIFICATION |
| 14/30300516 DC : 0 | BS EN ISO 19901-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
| 17/30343371 DC : 0 | BS 5974 - PLANNING, DESIGN, SETTING UP AND USE OF TEMPORARY SUSPENDED ACCESS EQUIPMENT - CODE OF PRACTICE |
| 12/30177610 DC : 0 | BS 5918 - SOLAR HEATING SYSTEMS FOR DOMESTIC HOT WATER - CODE OF PRACTICE |
| 11/30197409 DC : DRAFT JULY 2011 | BS 1133-8 - PACKAGING CODE - PART 8: GUIDANCE ON WOODEN BOXES, CASES AND CRATES - SECTION 8: WOODEN BOXES, CASES AND CRATES |
| 15/30301520 DC : 0 | BS 8004 - CODE OF PRACTICE FOR FOUNDATIONS (FORMERLY CP 2004) |
| BS 8605-1:2014 | External timber cladding Method of specifying |
| BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| CEI EN 50341-2-9 : 2016 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND |
| EN 50341-2-9:2017 | Overhead electrical lines exceeding AC 1 kV - Part 2-9: National Normative Aspects (NNA) for Great Britain and Northern Ireland (based on EN 50341-1:2012) |
| DIN EN ISO 12215-5:2014-10 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008 + AMD 1:2014) |
| BS 5268-2:2002 | Structural use of timber Code of practice for permissible stress design, materials and workmanship |
| BS 5918:2015 | Solar heating systems for domestic hot water. Code of practice for design and installation |
| BS 5427(2016) : 2016 | CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| BS 8103-3:2009 | Structural design of low-rise buildings Code of practice for timber floors and roofs for housing |
| BS 8201:2011 | Code of practice for installation of flooring of wood and wood-based panels |
| 12/30254626 DC : 0 | PD 6693-1 - RECOMMENDATIONS FOR THE DESIGN OF STRUCTURES TO BS EN 1995 EUROCODE 5 FOR TIMBER STRUCTURES (REVISION OF BS 5268) |
| 13/30262060 DC : 0 | BS 5502-22+A1 - BUILDINGS AND STRUCTURES FOR AGRICULTURE - PART 22: CODE OF PRACTICE FOR DESIGN, CONSTRUCTION AND LOADING |
| BS EN 1995-1-2 NA : 2004 | UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-2: GENERAL - STRUCTURAL FIRE DESIGN |
| 11/30209204 DC : 0 | BS 8201 - CODE OF PRACTICE FOR INSTALLATION OF FLOORING OF WOOD AND WOOD-BASED PANELS |
| UNI EN ISO 12215-5 : 2014 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| PD 6693-1:2012 | Recommendations for the design of timber structures to Eurocode 5: Design of timber structures General. Common rules and rules for buildings |
| ISO/TR 21136:2017 | Timber structures Vibration performance criteria for timber floors |
| BS EN ISO 12215-5 : 2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION |
| UNE-EN ISO 12215-5:2008 | Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) |
| 15/30095322 DC : 0 | BS 5427 - CODE OF PRACTICE FOR THE USE OF PROFILED SHEET FOR ROOF AND WALL CLADDING ON BUILDINGS |
| BS 8558:2011 | Guide to the design, installation, testing and maintenance of services supplying water for domestic use within buildings and their curtilages. Complementary guidance to BS EN 806 |
| DEFSTAN 81-041(PT2)/9(2017) : 2017 | PACKAGING OF DEFENCE MATERIEL - PART 2: DESIGN |
| CSA Z19901-3 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - SPECIFIC REQUIREMENTS FOR OFFSHORE STRUCTURES - PART 3: TOPSIDES STRUCTURE |
| 09/30191867 DC : 0 | NA TO BS EN 1995-1-1 - AMENDMENT TO UK NATIONAL ANNEX TO EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
| I.S. EN ISO 12215-5:2008 | SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 5: DESIGN PRESSURES FOR MONOHULLS, DESIGN STRESSES, SCANTLINGS DETERMINATION (ISO 12215-5:2008) |
| ISO 19901-3:2014 | Petroleum and natural gas industries — Specific requirements for offshore structures — Part 3: Topsides structure |
| EN ISO 19901-3:2014 | Petroleum and natural gas industries - Specific requirements for offshore structures - Part 3: Topsides structure (ISO 19901-3:2014) |
| 14/30286613 DC : 0 | BS 1139-6 - METAL SCAFFOLDING - PART 6: PREFABRICATED TOWER SCAFFOLDS OUTSIDE THE SCOPE OF BS EN 1004, BUT UTILIZING COMPONENTS FROM SUCH SYSTEMS - SPECIFICATION |
| I.S. EN 50341-2-9:2017 | OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 2-9: NATIONAL NORMATIVE ASPECTS (NNA) FOR GREAT BRITAIN AND NORTHERN IRELAND (BASED ON EN 50341-1:2012) |
| 15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| EN 14592:2008+A1:2012 | Timber structures - Dowel-type fasteners - Requirements |
| EN 1194:1999 | Timber structures - Glued laminated timber - Strength classes and determination of characteristic values |
| EN 335-2:2006 | Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| ISO 8970:2010 | Timber structures Testing of joints made with mechanical fasteners Requirements for wood density |
| EN 351-1:2007 | Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention |
| EN 14545:2008 | Timber structures - Connectors - Requirements |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 14250:2010 | Timber structures - Product requirements for prefabricated structural members assembled with punched metal plate fasteners |
| EN 1380:2009 | Timber structures - Test methods - Load bearing nails, screws, dowels and bolts |
| EN 10346:2015 | Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| EN 1382:2016 | Timber Structures - Test methods - Withdrawal capacity of timber fasteners |
| EN 312:2010 | Particleboards - Specifications |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| EN 301:2017 | Adhesives, phenolic and aminoplastic, for load-bearing timber structures - Classification and performance requirements |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| EN 1383:2016 | Timber structures - Test methods - Pull through resistance of timber fasteners |
| EN 594:2011 | Timber structures - Test methods - Racking strength and stiffness of timber frame wall panels |
| EN 350-2:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Part 2: Guide to natural durability and treatability of selected wood species of importance in Europe |
| EN 912:2011 | Timber fasteners - Specifications for connectors for timbers |
| EN 26891:1991 | Timber structures - Joints made with mechanical fasteners - General principles for the determination of strength and deformation characteristics (ISO 6891:1983) |
| EN 14081-1:2016 | Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements |
| EN 28970 : 1991 | TIMBER STRUCTURES - TESTING OF JOINTS MADE WITH MECHANICAL FASTENERS - REQUIREMENTS FOR WOOD DENSITY |
| EN 1381:2016 | Timber structures - Test methods - Load bearing stapled joints |
| ISO 2631-2:2003 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 2: Vibration in buildings (1 Hz to 80 Hz) |
| EN 385:2001 | Finger jointed structural timber - Performance requirements and minimum production requirements |
| EN 14374:2004 | Timber structures - Structural laminated veneer lumber - Requirements |
| EN 335-3:1995 | Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels |
| EN 338:2016 | Structural timber - Strength classes |
| EN 460:1994 | Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 387:2001 | Glued laminated timber - Large finger joints - Performance requirements and minimum production requirements |
| EN 14358:2016 | Timber structures - Calculation and verification of characteristic values |
| EN 383:2007 | Timber Structures - Test methods - Determination of embedment strength and foundation values for dowel type fasteners |
| EN 1075:2014 | Timber structures - Test methods - Joints made with punched metal plate fasteners |
| EN 335-1:2006 | Durability of wood and wood- based products - Definition of use classes - Part 1: General |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 409:2009 | Timber structures - Test methods - Determination of the yield moment of dowel type fasteners |
| EN 14080:2013 | Timber structures - Glued laminated timber and glued solid timber - Requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.