BS EN 438-2 : 2016
Current
The latest, up-to-date edition.
HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 2: DETERMINATION OF PROPERTIES
Hardcopy , PDF
English
01-01-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Assessment of appearance
5 Determination of thickness
6 Determination of length and width
7 Determination of edge straightness
8 Determination of edge squareness
9 Determination of flatness
10 Resistance to surface wear
11 Resistance to abrasion (flooring grade
laminates)
12 Resistance to immersion in boiling water
13 Substrate protection against water vapour
14 Resistance to water vapour
15 Resistance to wet conditions (Exterior grade
laminates)
16 Resistance to dry heat
17 Dimensional stability at elevated temperature
18 Resistance to wet heat
19 Resistance to climatic shock (exterior grade
laminates)
20 Resistance to impact by small-diameter ball
21 Resistance to impact by large diameter ball
22 Resistance to impact by large diameter ball
(flooring grade laminates)
23 Resistance to cracking under stress (laminates
<= 2 mm thick)
24 Resistance to crazing (Compact laminates)
25 Resistance to scratching
26 Resistance to staining
27 Light fastness (Xenon arc)
28 Resistance to UV light (Exterior grade laminates)
29 Resistance to artificial weathering (Exterior grade
laminates)
30 Determination of the microscratch resistance
31 Formability (Method A)
32 Formability (Method B)
33 Resistance to blistering (Method A)
34 Resistance to blistering (Method B)
Annex A (informative) - Surface finish and colour
influence on surface evaluations
Annex B (informative) - Calibration and maintenance of
abrasion equipment
Annex C (normative) - Measurement of shore A hardness
Provides the methods of test for determination of the properties of high-pressure decorative laminates.
| Committee |
PRI/76
|
| DevelopmentNote |
Supersedes BS 3794-2(1986) and 88/45314 DC. (07/2005) Supersedes 02/121747 DC. (08/2005) Supersedes 14/30303794 DC. (03/2016)
|
| DocumentType |
Standard
|
| Pages |
202
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ONORM EN 438-2 : 2016 | Identical |
| NS EN 438-2 : 1991 | Identical |
| EN 438-2:2016 | Identical |
| I.S. EN 438-2:2016 | Identical |
| NBN EN 438-2 : 2016 | Identical |
| SN EN 438-2 : 2016 | Identical |
| NF EN 438-2 : 2016 | Identical |
| UNI EN 438-2 : 2005 | Identical |
| UNE-EN 438-2:2016 | Identical |
| NEN EN 438-2 : 2016 | Identical |
| DEFSTAN 81-147/1(2017) : 2017 | WATER-VAPOUR RESISTANT MATERIAL AND BAGS FOR PACKAGING |
| DEFSTAN 02-900(PT0)/3(2014) : 2014 | GENERAL NAVAL STANDARD - PART 0: MANAGEMENT INFORMATION, COMMON DATA AND PROCEDURES FOR USE |
| DEFSTAN 02-120/2(2002) : INTERIM | REQUIREMENTS FOR WATER CLOSETS, URINALS, BATHROOMS AND WASHING FACILITIES IN HM SURFACE SHIPS AND SUBMARINES |
| DEFSTAN 02-130/1(2007) : 2007 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 02-130/2(2012) : 2012 | REQUIREMENTS FOR DECORATIVE LININGS AND COMPOSITE BULKHEADS |
| DEFSTAN 81-101/2(2008) : 2008 | REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS AND ASSOCIATED EQUIPMENT |
| DEFSTAN 02-900(PT3)/2(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 02-900(PT3)/1(2013) : 2013 | GENERAL NAVAL STANDARD - PART 3: SHIP SYSTEMS |
| DEFSTAN 81-101/3(2016) : 2016 | REUSABLE WATER VAPOUR RESISTANT BAGS FOR ENGINE CHANGE UNITS, PROPULSION UNITS, AND ASSOCIATED EQUIPMENT |
| DEFSTAN 02-123(PT2)/2(2002) : 2002 | REQUIREMENT FOR LAUNDRIES AND ASSOCIATED COMPARTMENTS - PART 2: LAUNDRY MACHINERY, EQUIPMENT AND FITTINGS |
| BS 4965:1999 | Decorative laminated plastics sheet veneered boards and panels |
| BS 2881:1989 | Specification for cupboards for the storage of medicines in health care premises |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| EN ISO 62:2008 | Plastics - Determination of water absorption (ISO 62:2008) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 209:2007 | Aluminium and aluminium alloys — Chemical composition |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 7267-2:2008 | Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
| ISO 12945-2:2000 | Textiles Determination of fabric propensity to surface fuzzing and to pilling Part 2: Modified Martindale method |
| EN ISO 4892-1:2016 | Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 4892-1:2016) |
| EN ISO 3668:2001 | Paints and varnishes - Visual comparison of the colour of paints (ISO 3668:1998) |
| EN ISO 4288:1997 | Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN 204:2016 | Classification of thermoplastic wood adhesives for non-structural applications |
| ISO 3668:2017 | Paints and varnishes — Visual comparison of colour of paints |
| EN 312:2010 | Particleboards - Specifications |
| EN ISO 12945-2:2000 | Textiles - Determination of fabric propensity to surface fuzzing and to pilling - Part 2: Modified Martindale method (ISO 12945-2:2000) |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
| ISO 62:2008 | Plastics Determination of water absorption |
| EN ISO 291:2008 | Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 316:2009 | Wood fibre boards - Definition, classification and symbols |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| ISO 178:2010 | Plastics Determination of flexural properties |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.