• There are no items in your cart

BS EN 54-11:2001

Current

Current

The latest, up-to-date edition.

Fire detection and fire alarm systems Manual call points

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

30-06-2006

Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
   4.1 Compliance
   4.2 Marking and data
   4.3 Frangible element
   4.4 Indicators for alarm condition
   4.5 Reset facility
   4.6 Test facility
   4.7 Construction and design
   4.8 Additional requirements for software
        controlled manual call points
5 Tests
   5.1 General
   5.2 Operational performance test
   5.3 Function test
   5.4 Test facility test (operational)
   5.5 Reliability tests (endurance)
   5.6 Variation of supply parameters
   5.7 Dry heat (operational)
   5.8 Dry heat (endurance)
   5.9 Cold (operational)
   5.10 Damp heat, cyclic (operational)
   5.11 Damp heat, cyclic (endurance)
   5.12 Damp heat, steady state (endurance)
   5.13 SO[2] corrosion (endurance)
   5.14 Shock (operational)
   5.15 Impact (operational)
   5.16 Vibration, sinusoidal (operational)
   5.17 Vibration, sinusoidal (endurance)
   5.18 Electromagnetic compatibility (EMC)
        (operational)
   5.19 Enclosure protection
Annex A (normative) Test apparatus for test for
        operation
Annex B (informative) Test apparatus for test for
        non-operation
Annex C (informative) Test apparatus for the impact test
Annex ZA (informative) Clauses addressing the provisions
                       of the EU Construction Products
                       Directive 89/106/EEC
Bibliography

Gives requirements and methods of test for manual call points in fire detection and fire alarm systems in and around buildings.

Committee
FSH/12
DevelopmentNote
Supersedes BS 5839-2(1983). (06/2001) Supersedes 96/542611 DC. (09/2002) Supersedes 05/30133549 DC (07/2006) Reviewed and Confirmed by BSI, May 2007. (04/2007)
DocumentType
Standard
Pages
52
PublisherName
British Standards Institution
Status
Current
Supersedes

12/30260280 DC : 0 BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DOMESTIC PREMISES
03/119007 DC : DRAFT DEC 2003 BS 5839-6 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 6: CODE OF PRACTICE FOR THE DESIGN, INSTALLATION AND MAINTENANCE OF FIRE DETECTION AND FIRE ALARM SYSTEMS IN DWELLINGS
BS 5839-6:2013 Fire detection and fire alarm systems for buildings Code of practice for the design, installation, commissioning and maintenance of fire detection and fire alarm systems in domestic premises
BS 7273-4:2015 Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors
BS 5839-1(2002) : 2002 FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
BS 9999:2008 Code of practice for fire safety in the design, management and use of buildings
BS 5839-1:2017 Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
12/30260278 DC : 0 BS 5839-1 - FIRE DETECTION AND FIRE ALARM SYSTEMS FOR BUILDINGS - PART 1: CODE OF PRACTICE FOR DESIGN, INSTALLATION, COMMISSIONING AND MAINTENANCE
12/30258581 DC : 0 BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS
06/30133094 DC : DRAFT OCT 2006 BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS
BS 5839-1:2013 Fire detection and fire alarm systems for buildings Code of practice for design, installation, commissioning and maintenance of systems in non-domestic premises
EEMUA 138 : 2010 DESIGN AND INSTALLATION OF ON-LINE ANALYSER SYSTEMS
15/30288999 DC : 0 BS 7273-4 - CODE OF PRACTICE FOR THE OPERATION OF FIRE PROTECTION MEASURES - PART 4: ACTUATION OF RELEASE MECHANISMS FOR DOORS
01/540647 DC : DRAFT MAY 2001 BS 5839-1 - FIRE DETECTION AND ALARM SYSTEMS FOR BUILDINGS - PART 1 - CODE OF PRACTICE FOR SYSTEM DESIGN, INSTALLATION AND MAINTENANCE
BS 9999:2017 Fire safety in the design, management and use of buildings. Code of practice
BS 5908-2:2012 Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations
BS 7273-4:2007 Code of practice for the operation of fire protection measures Actuation of release mechanisms for doors
16/30314117 DC : 0 BS 9999 - FIRE SAFETY IN THE DESIGN, MANAGEMENT AND USE OF BUILDINGS - CODE OF PRACTICE
PD 7974-4:2003 Application of fire safety engineering principles to the design of buildings Detection of fire and activation of fire protection systems. (Sub-system 4)
BS 5839-6:2004 Fire detection and fire alarm systems for buildings Code of practice for the design, installation and maintenance of fire detection and fire alarm systems in dwellings

EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
IEC 60068-2-18:2017 Environmental testing - Part 2-18: Tests - Test R and guidance: Water
IEC 60068-1:2013 Environmental testing - Part 1: General and guidance
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
EN 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
EN 60068-1:2014 Environmental testing - Part 1: General and guidance
HD 323.2.30 : 200S3 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST DB AND GUIDANCE: DAMP HEAT, CYCLIC (12 + 12-HOUR CYCLE)
EN 60068-2-27:2009 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
HD 323.2.3 : 200S2 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - TEST CA - DAMP HEAT, STEADY STATE
IEC 60068-2-3:1969 Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state
EN ISO 9001:2015 Quality management systems - Requirements (ISO 9001:2015)
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
ISO 9001:2015 Quality management systems — Requirements
EN 60068-2-6:2008 Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test A: Cold
EN 50130-4:2011/A1:2014 ALARM SYSTEMS - PART 4: ELECTROMAGNETIC COMPATIBILITY - PRODUCT FAMILY STANDARD: IMMUNITY REQUIREMENTS FOR COMPONENTS OF FIRE, INTRUDER, HOLD UP, CCTV, ACCESS CONTROL AND SOCIAL ALARM SYSTEMS
EN ISO 3098-0:1997 Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997)
EN 54-1:2011 Fire detection and fire alarm systems - Part 1: Introduction
HD 323.2.56 : 200S1 BASIC ENVIRONMENTAL TESTING PROCEDURES - TESTS - DAMP HEAT, STEADY STATE, PRIMARILY FOR EQUIPMENT

€303.84
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.