• CAN/CSA-C22.2 NO. 60335-1:11 (R2016)

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1)

    Available format(s):  Hardcopy, PDF

    Superseded date:  10-07-2020

    Language(s):  English, French

    Published date:  01-01-2011

    Publisher:  Canadian Standards Association

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preface
    NATIONAL DIFFERENCES
    FOREWORD
    INTRODUCTION
    1 Scope
    2 Normative references
    3 Definitions
    4 General requirement
    5 General conditions for the tests
    6 Classification
    7 Marking and instructions
    8 Protection against access to LIVE PARTS
    9 Starting of motor-operated appliances
    10 Power input and current
    11 Heating
    12 Void
    13 Leakage current and electric strength at operating
       temperature
    14 Transient overvoltages
    15 Moisture resistance
    16 Leakage current and electric strength
    17 Overload protection of transformers and associated
       circuits
    18 Endurance
    19 Abnormal operation
    20 Stability and mechanical hazards
    21 Mechanical strength
    22 Construction
    23 Internal wiring
    24 Components
    25 Supply connection and external flexible cords
    26 Terminals for external conductors
    27 Provision for earthing
    28 Screws and connections
    29 CLEARANCES, CREEPAGE DISTANCES, and solid insulation
    30 Resistance to heat and fire
    31 Resistance to rusting
    32 Radiation, toxicity, and similar hazards
    Annex A (informative) - Routine tests
    Annex B (normative) - Appliances powered by rechargeable
            batteries
    Annex C (normative) - Ageing test on motors
    Annex D (normative) - Thermal motor protectors
    Annex E (normative) - Needle-flame test
    Annex F (normative) - Capacitors
    Annex G (normative) - Safety isolating transformers
    Annex H (normative) - Switches
    Annex I (normative) - Motors having BASIC INSULATION that is
            inadequate for the RATED VOLTAGE of the appliance
    Annex J (normative) - Coated printed circuit boards
    Annex K (normative) - Overvoltage categories
    Annex L (informative) - Guidance for the measurement of
            clearances and creepage distances
    Annex M (normative) - Pollution degree
    Annex N (informative) - Proof tracking test
    Annex O (informative) - Selection and sequence of the tests
            of clause 30
    Annex P (informative) - Guidance for the application of this
            standard to appliances used in warm damp equable
            climates
    Annex Q (informative) - Sequence of tests for the evaluation
            of electronic circuits
    Annex R (informative) - Software evaluation
    Annex DVA (informative) - Component Standards Cross
              Reference
    Annex DVB (Normative) - Mexican Standards and Relevant
              Requirements
    Annex DVC (Normative) - Mechanical requirements for direct
              plug in appliances
    Bibliography
    Index of defined words

    Abstract - (Show below) - (Hide below)

    Pertains to the safety of electrical appliances for household and similar purposes, their RATED VOLTAGE being not more than 250 V for single-phase appliances and 480 V for other appliances.

    Scope - (Show below) - (Hide below)

    This is the harmonized ANCE, CSA, and UL standard for general requirements for safety of household and similar appliances. It is the first edition of NMX-J-521/1-ANCE, the first edition of CAN/CSA C22.2 No. 60335-1, and the fifth edition of UL 60335-1. This edition of CAN/CSA-C22.2 No. 60335-1 replaces the previous edition published in 2003 as CAN/CSA-E60335-1/4E. This edition of UL 60335-1 supersedes the previous edition(s) published in March, 2004. This Standard is based on the Standard for Safety of Household and Similar Appliances, part 1: General Requirements, IEC Publication 60335-1, edition 4.2, including the Interpretation Sheet issued February, 2007. Scope This International Standard deals with the safety of electrical appliances for household and similar purposes, their RATED VOLTAGE being not more than 250 V for single-phase appliances and 480 V for other appliances. Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. NOTE 1 Examples of such appliances are catering equipment, cleaning appliances for industrial and commercial use and appliances for hairdressers. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account persons (including children) whose * physical, sensory or mental capabilities; or * lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. NOTE 2 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. NOTE 3 This Standard does not apply to appliances intended exclusively for industrial purposes; appliances intended to be used in locations where special conditions prevail, such as the presence of corrosive or explosive atmosphere (dust, vapor or gas); audio, video and similar equipment (IEC 60065); appliances for medical purposes (IEC 60601); hand-held motor-operated electric TOOLS (IEC 60745); personal computers and similar equipment (IEC 60950); transportable motor-operated electric TOOLS (IEC 61029).

    General Product Information - (Show below) - (Hide below)

    Development Note Also numbered as NMX-J-521/1-ANCE and UL 60335-1. (11/2011)
    Document Type Standard
    Product Note Reconfirmed EN
    Publisher Canadian Standards Association
    Status Superseded
    Superseded By
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    CISPR 14-1:2016 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    UL 340 : 6 TEST FOR COMPARATIVE FLAMMABILITY OF LIQUIDS
    CSA E60335.2.29 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-29: PARTICULAR REQUIREMENTS FOR BATTERY CHARGERS
    IEC 60320-1:2015 Appliance couplers for household and similar general purposes - Part 1: General requirements
    CSA C22.2 No. 38 : 2014 THERMOSET-INSULATED WIRES AND CABLES
    UL 1077 : 7 SUPPLEMENTARY PROTECTORS FOR USE IN ELECTRICAL EQUIPMENT
    UL 98 : 2016 ENCLOSED AND DEAD-FRONT SWITCHES
    IEC GUIDE 110:2014 Home control systems - Guidelines relating to safety
    CSA E60730.2.9 : 2015 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-9: PARTICULAR REQUIREMENTS FOR TEMPERATURE SENSING CONTROLS
    IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
    IEC 60738-1:2006+AMD1:2009 CSV Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification
    UL 514A:11ED 2013-02 Metallic Outlet Boxes
    UL 61965 : 2 MECHANICAL SAFETY OF CATHODE RAY TUBES
    CSA C22.2 No. 223 : 2015 POWER SUPPLIES WITH EXTRA-LOW-VOLTAGE CLASS 2 OUTPUTS
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    UL 50 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
    UL 60691 : 4 THERMAL-LINKS - REQUIREMENTS AND APPLICATION GUIDE
    CSA C22.2 No. 5 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES AND CIRCUIT-BREAKER ENCLOSURES
    UL 62 : 2014 FLEXIBLE CORDS AND CABLES
    UL 20 : 2013 GENERAL-USE SNAP SWITCHES
    CSA C22.2 No. 1 : 2004 AUDIO, VIDEO AND SIMILAR ELECTRONIC EQUIPMENT
    IEC 61000-4-4 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-4: TESTING AND MEASUREMENT TECHNIQUES - ELECTRICAL FAST TRANSIENT/BURST IMMUNITY TEST
    IEC 60730-2-10:2006 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-10: PARTICULAR REQUIREMENTS FOR MOTOR-STARTING RELAYS
    IEC 60950:1999 Safety of information technology equipment
    CSA C22.2 No. 49 : 2014 FLEXIBLE CORDS AND CABLES
    UL 94 : 6 TESTS FOR FLAMMABILITY OF PLASTIC MATERIALS FOR PARTS IN DEVICES AND APPLIANCES
    IEC 60695-4:2012 FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS
    UL 1863 : 4 COMMUNICATIONS-CIRCUIT ACCESSORIES
    CSA C22.2 No. 77 : 2014 MOTORS WITH INHERENT OVERHEATING PROTECTION
    UL 1310 : 6 CLASS 2 POWER UNITS
    IEC 61000-4-11:2004+AMD1:2017 CSV Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests
    UL 1097 : 6ED 2012-02 DOUBLE INSULATION SYSTEMS FOR USE IN ELECTRICAL EQUIPMENT
    UL 61058-1 : 4 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    UL 248-8 : 3 LOW-VOLTAGE FUSES - PART 8: CLASS J FUSES
    IEC TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
    CSA C22.2 No. 21 : 2014 CORD SETS AND POWER-SUPPLY CORDS
    UL 900:8ED 2015-04 Air Filter Units
    UL 1283 : 7ED 2017 ELECTROMAGNETIC INTERFERENCE FILTERS
    CISPR 14-2:2015 RLV ELECTROMAGNETIC COMPATIBILITY - REQUIREMENTS FOR HOUSEHOLD APPLIANCES, ELECTRIC TOOLS AND SIMILAR APPARATUS - PART 2: IMMUNITY - PRODUCT FAMILY STANDARD
    ISO/IEC Guide 14:2003 Purchase information on goods and services intended for consumers
    CSA C22.2 No. 96 : 2013 PORTABLE POWER CABLES
    IEC 62151:2000 Safety of equipment electrically connected to a telecommunication network
    CSA C22.2 No. 24 : 2015 TEMPERATURE-INDICATING AND -REGULATING EQUIPMENT
    UL 83 : 2017 THERMOPLASTIC-INSULATED WIRES AND CABLES
    IEC 60320-2-3:1998+AMD1:2004 CSV Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0
    CSA C22.2 No. 144 : 1991 GROUND FAULT CIRCUIT INTERRUPTERS
    ISO 1463:2003 Metallic and oxide coatings Measurement of coating thickness Microscopical method
    UL 497B : 4 PROTECTORS FOR DATA COMMUNICATIONS AND FIRE-ALARM CIRCUITS
    UL 746C : 6 POLYMERIC MATERIALS - USE IN ELECTRICAL EQUIPMENT EVALUATIONS
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    UL 943 : 5 GROUND-FAULT CIRCUIT-INTERRUPTERS
    UL 917 : 2006 CLOCK-OPERATED SWITCHES
    UL 489 : 2013 MOLDED-CASE CIRCUIT BREAKERS, MOLDED-CASE SWITCHES, AND CIRCUIT-BREAKER ENCLOSURES
    C22.2 NO. 43-17 Lampholders (Binational standard with UL 496)
    UL 810 : 5 CAPACITORS
    UL 969 : 5 MARKING AND LABELING SYSTEMS
    IEC 60695-2-13:2010+AMD1:2014 CSV Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials
    UL 1449 : 4 SURGE PROTECTIVE DEVICES
    UL 60730-2-9 : 2017 AUTOMATIC ELECTRICAL CONTROLS - PART 2-9: PARTICULAR REQUIREMENTS FOR TEMPERATURE SENSING CONTROLS
    IEC 61000-4-6 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-6: TESTING AND MEASUREMENT TECHNIQUES - IMMUNITY TO CONDUCTED DISTURBANCES, INDUCED BY RADIO-FREQUENCY FIELDS
    IEC 60999-1:1999 Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included)
    UL 723 : 2010 TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS
    UL 508 : 1999 INDUSTRIAL CONTROL EQUIPMENT
    UL 514C : 4 NONMETALLIC OUTLET BOXES, FLUSH-DEVICE BOXES, AND COVERS
    IEC 60085:2007 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    CSA E730.2.7 : 1994 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR TIMERS AND TIME SWITCHES
    CSA C22.2 No. 210.2 : 2001 APPLIANCE WIRING MATERIAL PRODUCTS
    IEC 60721-2-1:2013 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 2-1: ENVIRONMENTAL CONDITIONS APPEARING IN NATURE - TEMPERATURE AND HUMIDITY
    IEC 61180-2:1994 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
    IEC 60320-2-2:1998 Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    UL 248-3 : 2 LOW-VOLTAGE FUSES - PART 3: CLASS CA AND CB FUSES
    ISO/IEC Guide 50:2014 Safety aspects Guidelines for child safety in standards and other specifications
    IEC 60695-2-12:2010+AMD1:2014 CSV Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials
    CSA C22.2 No. 65 : 2013 WIRE CONNECTORS
    UL 248-12 : 3 LOW-VOLTAGE FUSES - PART 12: CLASS R FUSES
    UL 248-11 : 3 LOW-VOLTAGE FUSES - PART 11: PLUG FUSES
    IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
    UL 746D : 7 POLYMERIC MATERIALS - FABRICATED PARTS
    ISO/IEC Guide 37:2012 Instructions for use of products by consumers
    IEC 61643-1:2005 Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests
    UL 796 : 2011 PRINTED-WIRING BOARDS
    CSA E60730.1 : 2015 Automatic electrical controls for household and similar use — Part 1: General requirements
    UL 486E : 5 EQUIPMENT WIRING TERMINALS FOR USE WITH ALUMINUM AND/OR COPPER CONDUCTORS
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    UL 248-4 : 2 LOW-VOLTAGE FUSES - PART 4: CLASS CC FUSES
    UL 510 : 9 POLYVINYL CHLORIDE, POLYETHYLENE AND RUBBER INSULATING TAPE
    IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements
    ISO 9772:2012 Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame
    UL 1998 : 3 SOFTWARE IN PROGRAMMABLE COMPONENTS
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    IEC 60691:2015 Thermal-links - Requirements and application guide
    IEC GUIDE 104:2010 The preparation of safety publications and the use of basic safety publications and group safety publications
    UL 2111 : 1 OVERHEATING PROTECTION FOR MOTORS
    CSA C22.2 No. 0.15 : 2015 ADHESIVE LABELS
    IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test B: Dry heat
    C22.2 NO. 8-13 (R2018) Electromagnetic interference (EMI) filters
    UL 224 : 6 EXTRUDED INSULATING TUBING
    IEC 61000-4-2:2008 Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
    IEC 60695-11-10:2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods
    UL 1054 : 7 SPECIAL-USE SWITCHES
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    UL 248-10 : 3 LOW-VOLTAGE FUSES - PART 10: CLASS L FUSES
    CSA E730.2.4 : 1994 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS FOR MOTOR COMPRESSORS OF HERMETIC AND SEMI HERMETIC TYPE
    UL 244A : 3 SOLID-STATE CONTROLS FOR APPLIANCES
    IEC 60598-1:2014+AMD1:2017 CSV Luminaires - Part 1: General requirements and tests
    UL 248-9 : 2 LOW-VOLTAGE FUSES - PART 9: CLASS K FUSES
    IEC 60061-1:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
    IEC 60906-1:2009 IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c.
    CSA C22.2 No. 127 : 2015 EQUIPMENT AND LEAD WIRES
    IEC 60034-1:2017 Rotating electrical machines - Part 1: Rating and performance
    UL 514B : 6 CONDUIT, TUBING, AND CABLE FITTINGS
    ISO 2178:2016 Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method
    IEC 60335-2-29:2016 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers
    CSA C22.2 No. 182.3 : 2016 SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS
    UL 497A : 3 SECONDARY PROTECTORS FOR COMMUNICATIONS CIRCUITS
    C22.2 NO. 75-17 Thermoplastic insulated wires and cables (Trinational standard with UL 83 and NMX-J-010-ANCE-2017)
    ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
    IEC 60252-1:2010+AMD1:2013 CSV AC motor capacitors - Part 1: General - Performance, testing andrating - Safety requirements - Guidance for installation and operation
    CSA C22.2 No. 100 : 2014 MOTORS AND GENERATORS
    UL 746A : 6 POLYMERIC MATERIALS - SHORT TERM PROPERTY EVALUATIONS
    UL 991 : 3 TESTS FOR SAFETY-RELATED CONTROLS EMPLOYING SOLID-STATE DEVICES
    UL 248-1 : 3 LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS
    IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION) ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION
    UL 248-15 : 2 LOW-VOLTAGE FUSES - PART 15: CLASS T FUSES
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    IEC 60664-3:2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
    UL 248-2 : 2 LOW-VOLTAGE FUSES - PART 2: CLASS C FUSES
    CSA C22.2 NO. 85:14 (R2018) Rigid PVC boxes and fittings
    CISPR 11:2015 RLV Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement
    UL 1059 : 4 TERMINAL BLOCKS
    UL 817 : 2015 CORD SETS AND POWER-SUPPLY CORDS
    UL 1642 : 5 LITHIUM BATTERIES
    CSA C22.2 No. 226 : 1992 PROTECTORS IN TELECOMMUNICATION NETWORKS
    IEC 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    UL 1577 : 5 OPTICAL ISOLATORS
    IEC 61770:2008+AMD1:2015 CSV Electric appliances connected to the water mains - Avoidance ofbacksiphonage and failure of hose-sets
    CSA C22.2 No. 14 : 2013 INDUSTRIAL CONTROL EQUIPMENT
    CSA C22.2 No. 55 : 2015 SPECIAL USE SWITCHES
    CSA C22.2 No. 177 : 2013 CLOCK-OPERATED SWITCHES
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    C22.2 NO. 182.1-17 Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682)
    IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    UL 496 : 2017 LAMPHOLDERS
    UL 1446 : 7 SYSTEMS OF INSULATING MATERIALS - GENERAL
    UL 1414 : 6 CAPACITORS AND SUPPRESSORS FOR RADIO- AND TELEVISION-TYPE APPLIANCES
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
    IEC 61000-4-13:2002+AMD1:2009+AMD2:2015 CSV Electromagnetic compatibility (EMC) - Part 4-13: Testing and measurement techniques - Harmonics and interharmonics includingmains signalling at a.c. power port, low frequency immunity tests
    UL 873 : 2012 TEMPERATURE-INDICATING AND REGULATING EQUIPMENT
    UL 486C : 6 SPLICING WIRE CONNECTORS
    UL 44 : 2018 THERMOSET-INSULATED WIRES AND CABLES
    UL 746B : 4 POLYMERIC MATERIALS - LONG TERM PROPERTY EVALUATIONS
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    UL 248-5 : 2 LOW-VOLTAGE FUSES - PART 5: CLASS G FUSES
    CSA C22.2 No. 113 : 2015 FANS AND VENTILATORS
    IEC 61000-3-2 : 4.0 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE)
    UL 310 : 9 ELECTRICAL QUICK-CONNECT TERMINALS
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective