CEI EN 60422 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
Hardcopy , PDF
16-11-2024
English - Italian
01-01-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Properties and deterioration/
degradation of oil
5 Oil tests and their significance
6 Sampling of oil from equipment
7 Categories of equipment
8 Evaluation of mineral insulating
oil in new equipment
9 Evaluation of oil in service
10 Handling and storage
11 Treatment
12 Replacement of oil in electrical
equipment
13 Passivation
Annex A (informative) - Evaluating
water in oil and insulation
Annex B (informative) - Particles
Annex C (informative) - Test method
for determination of sediment
and sludge
Bibliography
Annex ZA (normative) - Normative
references to international
publications with their
corresponding European
publications
Pertains guidance on the supervision and maintenance of the quality of the insulating oil in electrical equipment.
| Committee |
CT 10
|
| DevelopmentNote |
Classificazione CEI 10-43. (09/2006) Supersedes CEI 10. (05/2008)
|
| DocumentType |
Standard
|
| Pages |
98
|
| PublisherName |
Comitato Elettrotecnico Italiano
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| IEC 60422:2013 | Identical |
| EN 60422:2013 | Identical |
| ISO 4793:1980 | Laboratory sintered (fritted) filters — Porosity grading, classification and designation |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 60156:1995 | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
| IEC 62021-1:2003 | Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
| IEC 62021-2:2007 | Insulating liquids - Determination of acidity - Part 2: Colourimetric titration |
| IEC 61125:1992 | Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
| CEI 10-1 : 8ED 1997 | OLI MINERALI ISOLANTI PER TRASFORMATORI E PER APPARECCHIATURE ELETTRICHE |
| IEC 60156:1995 | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
| EN 61125:1993/A1:2004 | UNUSED HYDROCARBON-BASED INSULATING LIQUIDS - TEST METHODS FOR EVALUATING THE OXIDATION STABILITY |
| IEC 60599:2015 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| EN 14210:2003 | Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
| EN 61619:1997 | Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| IEC 62535:2008 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| IEC 60475:2011 | Method of sampling insulating liquids |
| IEC 60567:2011 | Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
| EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
| EN 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| EN 62021-2 : 2007 | INSULATING LIQUIDS - DETERMINATION OF ACIDITY - PART 2: COLOURIMETRIC TITRATION |
| EN 62535:2009 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
| EN 60970:2007/corrigendum:2008 | INSULATING LIQUIDS - METHODS FOR COUNTING AND SIZING PARTICLES |
| EN 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| IEC 60296:2012 RLV | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| EN 60296:2012 | Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
| IEC 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| EN 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| IEC 60666:2010 | Detection and determination of specified additives in mineral insulating oils |
| CEI 10-9 : 1ED 1997 | DETERMINAZIONE DELLA PERMETTIVITA, DEL FATTORE DI DISSIPAZIONE DIELETTRICA E DELLA RESISTIVITA DI LIQUIDI ISOLANTI |
| IEC 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| IEC 61619:1997 | Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
| CEI 10-13 : 1ED 1997 | DETERMINAZIONE DELLA QUANTITA D'ACQUA NEI LIQUIDI ISOLANTI MEDIANTE TITOLAZIONE AUTOMATICA COULOMETRICA DI KARL FISCHER |
| IEC 61198:1993 | Mineral insulating oils - Methods for the determination of 2-furfural and related compounds |
| EN 62021-1:2003 | Insulating liquids - Determination of acidity - Part 1: Automatic potentiometric titration |
| IEEE C57.106-2006 | IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
| ISO 4407:2002 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the counting method using an optical microscope |
| EN 60475:2011 | Method of sampling insulating liquids |
| ISO Guide 73:2009 | Risk management — Vocabulary |
| EN 60666 : 2010 | DETECTION AND DETERMINATION OF SPECIFIED ADDITIVES IN MINERAL INSULATING OILS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.