IEC 60243-1:2013
|
Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies
|
ISO 182-2:1990
|
Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 2: pH method
|
ISO 4589-3:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test
|
EN ISO 62:2008
|
Plastics - Determination of water absorption (ISO 62:2008)
|
ISO 2921:2011
|
Rubber, vulcanized Determination of low-temperature retraction (TR test)
|
IEC 60212:2010
|
Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
ISO 974:2000
|
Plastics Determination of the brittleness temperature by impact
|
IEC 60250:1969
|
Recommended methods for the determination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths
|
IEC 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
EN 60068-2-20:2008
|
Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads
|
IEC 60304:1982
|
Standard colours for insulation for low-frequency cables and wires
|
IEC 60216-4-2:2000
|
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
|
IEC 60216-4-1:2006
|
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
|
ISO 105-B01:2014
|
Textiles Tests for colour fastness Part B01: Colour fastness to light: Daylight
|
ISO 13943:2017
|
Fire safety — Vocabulary
|
IEC 60754-1:2011
|
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the halogen acid gas content
|
EN 60216-4-2:2000
|
Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 °C
|
IEC 60216-2:2005
|
Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria
|
EN 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
HD 429 : 200S1
|
METHODS OF TEST FOR VOLUME RESISTIVITY AND SURFACE RESISTIVITY OF SOLID ELECTRICAL INSULATING MATERIALS
|
ISO 1431-1:2012
|
Rubber, vulcanized or thermoplastic Resistance to ozone cracking Part 1: Static and dynamic strain testing
|
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials
|
IEC 60589:1977
|
Methods of test for the determination of ionic impurities in electrical insulating materials by extraction with liquids
|
ISO 5-4:2009
|
Photography and graphic technology Density measurements Part 4: Geometric conditions for reflection density
|
IEC 60754-2:2011
|
Test on gases evolved during combustion of materials from cables - Part 2: Determination of acidity (by pH measurement) and conductivity
|
IEC 60068-2-10:2005
|
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth
|
IEC TS 60695-11-21:2005
|
Fire hazard testing - Part 11-21: Test flames - 500 W vertical flame test method for tubular polymeric materials
|
ISO 5-3:2009
|
Photography and graphic technology Density measurements Part 3: Spectral conditions
|
EN 60426:2007
|
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
|
EN ISO 13943:2017
|
Fire safety - Vocabulary (ISO 13943:2017)
|
EN 60243-1:2013
|
ELECTRIC STRENGTH OF INSULATING MATERIALS - TEST METHODS - PART 1: TESTS AT POWER FREQUENCIES (IEC 60243-1:2013)
|
ISO 5-1:2009
|
Photography and graphic technology Density measurements Part 1: Geometry and functional notation
|
EN ISO 4589-2:2017
|
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
|
ISO 62:2008
|
Plastics Determination of water absorption
|
IEC 60426:2007
|
Electrical insulating materials - Determination of electrolytic corrosion caused by insulating materials - Test methods
|
EN ISO 182-2 : 1999
|
PLASTICS - DETERMINATION OF THE TENDENCY OF COMPOUNDS AND PRODUCTS BASED ON VINYL CHLORIDE HOMOPOLYMERS AND COPOLYMERS TO EVOLVE HYDROGEN CHLORIDE AND ANY OTHER ACIDIC PRODUCTS AT ELEVATED TEMPERATURES - PART 2 - PH METHOD
|
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
|
ISO 4589-2:2017
|
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
|
IEC 60587:2007
|
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
|
EN 60216-4-1:2006
|
Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens
|
ISO 105-A02:1993
|
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour
|
HD 602 : 200S1
|
TEST ON GASES EVOLVED DURING COMBUSTION OF ELECTRIC CABLES - DETERMINATION OF DEGREE OF ACIDITY OF GASES EVOLVED DURING THE COMBUSTION OF MATERIALS TAKEN FROM ELECTRIC CABLES BY MEASURING PH CONDUCTIVITY
|
EN ISO 105-B01:2014
|
Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014)
|
HD 381 : 200S1
|
METHODS OF TEST FOR THE DETERMINATION OF IONIC IMPURITIES IN ELECTRICAL INSULATING MATERIALS BY EXTRACTION WITH LIQUIDS
|
EN 60212:2011
|
Standard conditions for use prior to and during the testing of solid electrical insulating materials
|
EN ISO 4589-3:2017
|
PLASTICS - DETERMINATION OF BURNING BEHAVIOUR BY OXYGEN INDEX - PART 3: ELEVATED-TEMPERATURE TEST (ISO 4589-3:2017)
|
ISO 5-2:2009
|
Photography and graphic technology Density measurements Part 2: Geometric conditions for transmittance density
|
ISO 182-1:1990
|
Plastics Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures Part 1: Congo red method
|