• There are no items in your cart

DIN IEC 60068-1:1990-11

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - GENERAL AND GUIDANCE

Superseded date

01-03-1995

Published date

12-01-2013

Vorwort
Einleitung
Historischer Überblick zum Teil 1: Allgemeines
1 Einführung
2 Anwendungsbereich
3 Zweck
4 Begriffe
5 Normalklimate
6 Anwendung der Prüfungen
7 Bevorzugte Reihenfolge von klimatischen Prüfungen
8 Klimatische Klassen
9 Durchführung der Prüfungen
10 Bedeutung des Zahlenwertes einer Grösse
Anhang A Klimatische Klassen für Bauelemente
Anhang B Allgemeiner Leitfaden für Umweltprüfungen

Includes a series of methods of environmental test and their appropriate severities, and prescribes various atmospheric conditions for measurements and tests designed to assess the ability of specimens to perform under expected conditions of transportation, storage and all aspects of operational use.

DevelopmentNote
DRAFT 2008 issued in March 2008 is now cancelled. (09/2015)
DocumentType
Standard
PublisherName
German Institute for Standardisation (Deutsches Institut für Normung)
Status
Superseded
SupersededBy

Standards Relationship
HD 323.1 : 200S2 Corresponds

DIN 41650-1:1986-05 SECTIONAL SPECIFICATION FOR CONNECTORS; CONNECTORS FOR PRINTED BOARDS
DIN 41611-4:1986-04 SOLDERLESS ELECTRICAL CONNECTIONS; CLIP CONNECTIONS; TERMINOLOGY, REQUIREMENTS, TESTING
DIN IEC 60068-2-30:1986-09 ELECTRICAL ENGINEERING - BASIC ENVIRONMENTAL TESTING PROCEDURES - TEST DB AND GUIDANCE - DAMP HEAT, CYCLIC (12 + 12 HOUR CYCLE)
DIN VDE 0627 : 1986 CONNECTORS AND PLUG-AND SOCKET DEVICES - FOR RATED VOLTAGES UP 1000 V A.C., UP TO 1200 V D.C. AND RATED CURRENTS UP TO 500 A FOR EACH POLE
DIN 41612-5:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; RATINGS, REQUIREMENTS, TESTS
DIN 43652-3:1985-12 PLUG CONNECTORS OF HIGH-DENSITY, RECTANGULAR TYPE; RATINGS, REQUIREMENTS, TEST
DIN 41698:1984-07 ELECTRICAL COMMUNICATION ENGINEERING; PLUG; REQUIREMENTS, TESTS
DIN 43650-2:1983-07 PLUG CONNECTORS, SQUARE TYPE; RATINGS, REQUIREMENTS, TEST
DIN EN 60068-2-13:2000-02 Environmental testing - Part 2: Tests; test M: Low air pressure (IEC 60068-2-13:1983); German version EN 60068-2-13:1999
DIN IEC 60384-1:1991-11 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
DIN 40046-57:1981-11 ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRICAL ENGINEERING - PROCEDURE FOR MEASURING DYNAMIC STRESSES
DIN IEC 60068-2-53:1986-10 ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; GUIDANCE TO TESTS Z/AFC AND Z/BFC: COMBINED TEMPERATURE (COLD AND DRY HEAT) AND VIBRATION (SINUSOIDAL) TESTS
DIN 41619:1983-12 SECTIONAL SPECIFICATION FOR ROTARY WAFER SWITCHES FOR TELECOMMUNICATION
DIN 41626-1:1989-10 SPECIAL CONTACTS FOR MULTI TWO-PART CONNECTORS; CONTACTS FOR HIGH CURRENT (TYPE H); DIMENSIONS, RATINGS, REQUIREMENTS, TESTS
DIN 41302-1:1986-05 LAMINATIONS FOR TRANSFORMERS AND INDUCTORS FOR USE IN TELECOMMUNICATION AND ELECTRONIC EQUIPMENT
DIN 41650-2:1988-04 SECTIONAL SPECIFICATION FOR CONNECTORS; RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHz; GENERAL REQUIREMENTS & GUIDE FOR THE PREPARATION OF DETAIL SPECIFICATIONS
DIN 41704-2:1987-07 ELECTRICAL COMMUNICATIONS ENGINEERING; CONNECTORS WITH TWO ROWS OF CONTACTS, CONNECTION BOX AND CONNECTOR, 4- AND 8 POLES; REQUIREMENTS, TEST
VDE 0560-6 : 1986 CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS
DIN 45175-3:1987-05 QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHARACTERISTICS OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHECK LIST
DIN EN 61180-2 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
VDE 0432-11 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 2: TEST EQUIPMENT
VDE 0804 : 1989 AMD 1 1992 TELECOMMUNICATIONS; ADDITIONAL REQUIREMENTS FOR CONSTRUCTION AND TESTING OF APPARATUS
VDE 0884 : 1987 OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK, REQUIREMENTS, TESTS
DIN IEC 60068-3-1:1979-04 BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 3: BACKGROUND INFORMATION - SECTION 1: COLD AND DRY HEAT TESTS
DIN 54341:1988-01 TESTING OF SEATS IN RAILWAYS FOR PUBLIC TRAFFIC; DETERMINATION OF BURNING BEHAVIOUR WITH A PAPER PILLOW IGNITION SOURCE
DIN EN 60249-1:1994-05 BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS
DIN VDE 0560-6 : 1986 CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS
DIN 41715-2:1993-06 ELECTRICAL COMMUNICATION ENGINEERING; CONNECTORS, FOR TELECOMMUNICATIONS ADAPTER EQUIPMENT (TAE); RATINGS, REQUIREMENTS, TESTS
DIN EN 144000:1995-09 GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS
DIN EN 60749:2002-09 SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS
DIN 44080:1983-10 THERMISTORS - PTC, TECHNICAL TERMS AND TESTS
DIN 41633:1981-05 Rotary wafer switches 17 mm diameter; 10 and 12 positions axial soldering; dimensions, ratings, requirements and tests
DIN 41632:1982-08 Rotary wafer switches 28 mm ? 39 mm; 12 positions; dimensions, ratings, requirements, tests
DIN 45500-1:1984-01 HIGH FIDELITY AUDIO EQUIPMENT AND SYSTEMS - MINIMUM PERFORMANCE REQUIREMENTS - PART 1: GENERAL
DIN 41850-3:1985-09 INTEGRATED FILM CIRCUITS; METHODS FOR THE ASSESSMENT OF DIELECTRIC PASTES
DIN VDE 0560-8 : 1988 CAPACITORS - MOTOR CAPACITORS
DIN 41631:1982-08 Rotary wafer switches 41 mm ? 54 mm; 13 and 26 positions; dimensions, ratings, requirements, tests
DIN EN 61180-1 : 1995 HIGH-VOLTAGE TEST TECHNIQUES FOR LOW-VOLTAGE EQUIPMENT - PART 1: DEFINITIONS, TEST AND PROCEDURE REQUIREMENTS
DIN 45174-2:1987-05 QUARTZ CRYSTAL CONTROLLED OSCILLATORS; TEST CONDITIONS AND METHODS
DIN EN 61143-1:1995-01 ELECTRICAL MEASURING INSTRUMENTS - X-T RECORDERS - PART 1: DEFINITIONS AND REQUIREMENTS
DIN IEC 60068-2-18:1991-04 ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST R AND GUIDANCE: WATER
DIN 41651-2:1989-09 TWO-PART CONNECTORS FOR PRINTED BOARDS FOR CONNECTION OF FLAT CABLES WITH ROUND CONDUCTORS; GRID 2,54 MM (0,1 IN); GAUGES, RATINGS, REQUIREMENTS, TESTS
DIN VDE 0619 : 1987 CABLE ENTRIES FOR CABLES AND CORDS; REQUIREMENTS; TESTS
DIN VDE 0884 : 1987 OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST
DIN 41626-2:1989-10 SPECIAL CONTACTS FOR MULTI TWO-PART CONNECTORS; CONCENTRIC CONTACTS (TYPE C); DIMENSIONS, RATINGS, REQUIREMENTS, TESTS
DIN 41611-5:1984-09 SOLDERLESS ELECTRICAL CONNECTIONS; PRESS-IN CONNECTIONS; TERMS, REQUIREMENTS, TESTS
DIN IEC 60261:1991-05 SEALING TEST FOR PRESSURIZED WAVEGUIDE - TUBING AND ASSEMBLIES

Sorry this product is not available in your region.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.