DIN IEC 60068-2-20:1991-04
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TEST T: SOLDERING
Superseded date
01-02-2009
Superseded by
Published date
12-01-2013
Sorry this product is not available in your region.
Vorwort
Einleitung
1 Anwendungsbereich
2 Zweck
3 Begriffe
4 Prüfung Ta: Lötbarkeit von Draht- und Flachanschlüssen
5 Prüfung Tb: Lötwärmebeständigkeit
6 Prüfung Tc: Lötbarkeit von Leiterplatten und
metallkaschierten Schichtpressstoffen
Anhang A Beispiel für ein Gerät für das
Alterungsverfahren 1: Dampf
Anhang B Vorschrift für das Lot
Anhang C Vorschrift für das Flussmittel
Anhang D Vorschrift für das Lotkugelgerät
Anhang E Anordnung des Prüflinghalters und der
Zeitmessnadel
This standard is included in DIN DVS Handbook 196/2.
| DevelopmentNote |
Supersedes DIN 40046-18. (02/2003)
|
| DocumentType |
Standard
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| HD 323.2.20 : 200S3 | Corresponds |
| IEC 60068-2-20:2008 | Identical |
| DIN 45921-103:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY |
| DIN IEC 60068-2-54:1988-01 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; TESTS T; SOLDERING; TEST TA; SOLDERABILITY TESTING BY THE WETTING BALANCE METHOD |
| DIN VDE 0627 : 1986 | CONNECTORS AND PLUG-AND SOCKET DEVICES - FOR RATED VOLTAGES UP 1000 V A.C., UP TO 1200 V D.C. AND RATED CURRENTS UP TO 500 A FOR EACH POLE |
| DIN EN 138000 : 1997 | GENERIC SPECIFICATION; FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION (INDUCTORS FOR WHICH SAFETY TESTS ARE REQUIRED) |
| DIN 43650-2:1983-07 | PLUG CONNECTORS, SQUARE TYPE; RATINGS, REQUIREMENTS, TEST |
| DIN 41715-1:1991-05 | ELECTRICAL COMMUNICATION ENGINEERING; CONNECTORS, TELECOMMUNICATION ADAPTER EQUIPMENT (TAE); COMMON CHARACTERISTICS, TYPES |
| DIN IEC 60384-1:1991-11 | FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION |
| DIN IEC 60249-3A : 1986 | METAL CLAD BASE MATERIALS FOR PRINTED CIRCUITS; SPECIAL MATERIALS; SPECIFICATION NO. 2; COPPER FOIL FOR USE IN THE MANUFACTURE OF COPPER CLAD BASE MATERIALS |
| DIN 40500-5:1983-06 | COPPER FOR ELECTRICAL PURPOSES; TINNED WIRE; TECHNICAL DELIVERY CONDITIONS |
| DIN 40686-5:1983-08 | SURFACES OF DENSE CERAMIC COMPONENTS FOR ELECTRICAL ENGINEERING; TESTING OF HARD SOLDERABLE METAL COATINGS |
| DIN EN 133000 : 1997 | GENERIC SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION |
| DIN EN 60068-4:1996-10 | ENVIRONMENTAL TESTING - PART 4: INFORMATION FOR SPECIFICATION WRITERS - TEST SUMMARIES |
| VDE 0560-22 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| DIN 45921-109:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY, METAL GLAZE TYPE |
| DIN 45921-107:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE WOUND RESISTORS, HIGH STABILITY WITH LOW TEMPERATURE COEFFICIENT |
| DIN 41704-2:1987-07 | ELECTRICAL COMMUNICATIONS ENGINEERING; CONNECTORS WITH TWO ROWS OF CONTACTS, CONNECTION BOX AND CONNECTOR, 4- AND 8 POLES; REQUIREMENTS, TEST |
| VDE 0560-6 : 1986 | CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS |
| DIN 45175-3:1987-05 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHARACTERISTICS OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS; CHECK LIST |
| DIN EN ISO 27874:2009-01 | METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED GOLD AND GOLD ALLOY COATINGS FOR ELECTRICAL, ELECTRONIC AND ENGINEERING PURPOSES - SPECIFICATION AND TEST METHODS |
| DIN EN 61270-1 : 1997 | CAPACITORS FOR MICROWAVE OVENS - PART 1: GENERAL |
| DIN EN 137000 : 1998-03 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| VDI/VDE 2251 Blatt 3:1998-09 | Precision engineering components - Solder connections |
| DIN EN 175200:1996-11 | SECTIONAL SPECIFICATION - CIRCULAR CONNECTORS |
| VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK, REQUIREMENTS, TESTS |
| VDE 0472-808 : 1984 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - TINNING, SOLDERABILITY & SOLDERING SHRINKAGE |
| DIN EN 60938-1 : 2008 | FIXED INDUCTORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 1: GENERIC SPECIFICATION |
| DIN 57472-808 : 1984 | TESTING OF CABLES, WIRES AND FLEXIBLE CORDS; TINNING, SOLDERABILITY AND SOLDERING SHRINKAGE |
| DIN DVS HDBK 196 : 4ED 2001 | SCHWEISSTECHNIK 5 - HARTLOETEN, WEICHLOETEN, GEDRUCKTE SCHALTUNGEN |
| DIN 41307-5:1981-10 | Accessory parts for small transformers and chokes; brackets for cores type E, ED, EE, EF and EK; printed circuits, magnetic axis horizontal |
| VDE 0557-6 : 2001 | LOW-VOLTAGE POWER SUPPLIES, DC OUTPUT - PART 6: REQUIREMENTS FOR LOW-VOLTAGE POWER SUPPLIES OF ASSESSED PERFORMANCE |
| DIN EN 60249-1:1994-05 | BASE MATERIALS FOR PRINTED CIRCUITS - PART 1: TEST METHODS |
| DIN 45921-108;CECC 40101-033:1983-09 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY |
| DIN IEC 60679-2:1997-09 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS - PART 2: GUIDE TO THE USE OF QUARTZ CRYSTAL CONTROLLED OSCILLATORS |
| DIN EN 165000-1:1996-11 | FILM AND HYBRID INTEGRATED CIRCUITS - PART 1: GENERIC SPECIFICATION - CAPABILITY APPROVAL PROCEDURE |
| DIN EN 144000:1995-09 | GENERIC SPECIFICATION: DIRECTLY HEATED POSITIVE TEMPERATURE COEFFICIENT THERMISTORS TYPICALLY MADE FROM MODIFIED FERRO-ELECTRIC MATERIALS |
| DIN EN 60749:2002-09 | SEMICONDUCTOR DEVICES - MECHANICAL AND CLIMATIC TEST METHODS |
| DIN 41850-2:1985-09 | FILM AND HYBRID INTEGRATED CIRCUITS; MATERIALS, METHODS FOR THE ASSESSMENT OF CONDUCTIVE PASTES |
| DIN 45921-203;CECC 40201-004:1983-10 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED POWER RESISTORS WIREWOUND, VITREOUS ENAMELLED, AXIAL LEADS, ASSESSMENT LEVEL "S" |
| DIN EN 140201:1997-05 | BLANK DETAIL SPECIFICATION: FIXED POWER RESISTORS (ASSESSMENT LEVEL S) |
| DIN 44080:1983-10 | THERMISTORS - PTC, TECHNICAL TERMS AND TESTS |
| DIN 41632:1982-08 | Rotary wafer switches 28 mm ? 39 mm; 12 positions; dimensions, ratings, requirements, tests |
| DIN VDE 0616-3 : 1992 | LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS |
| DIN VDE 0560-6 : 1986 | CAPACITORS - CAPACITORS WITH NOMINAL POWERS UP TO 1,5 KVAR FOR INSTALLATIONS WITH DISCHARGE LAMPS, IN PARTICULAR WITH FLUORESCENT LAMPS |
| DIN VDE 0560-8 : 1988 | CAPACITORS - MOTOR CAPACITORS |
| DIN 41631:1982-08 | Rotary wafer switches 41 mm ? 54 mm; 13 and 26 positions; dimensions, ratings, requirements, tests |
| DIN 45174-2:1987-05 | QUARTZ CRYSTAL CONTROLLED OSCILLATORS; TEST CONDITIONS AND METHODS |
| DIN 45921-106:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, HIGH STABILITY WITH LOW DRIFT AND LOW FAILURE-RATE |
| DIN EN 60252 : 1994 | CAPACITORS - MOTOR CAPACITORS |
| DIN EN ISO 9455-2:1995-11 | SOFT SOLDERING FLUXES - TEST METHODS - PART 2: DETERMINATION OF NON-VOLATILE MATTER, EBULLIOMETRIC METHOD |
| VDE 0115-430 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| VDE 0560-800 : 1998 | GENERIC SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC A.C. CAPACITORS WITH NON-SOLID ELECTROLYTE FOR USE WITH MOTORS |
| DIN VDE 0884 : 1987 | OPTOCOUPLER FOR PROTECTIVE SEPARATION AGAINST ELECTRIC SHOCK; REQUIREMENTS, TEST |
| DIN 45921-102:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, STANDARD STABILITY |
| DIN 45921-105:1992-11 | HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS; DETAIL SPECIFICATION FOR FIXED LOW POWER NON-WIRE-WOUND RESISTORS, CARBON COMPOSITION TYPE, STANDARD STABILITY |
| DIN 41305-7:1981-05 | SMALL TRANSFORMERS AND CHOKES; COIL-FORMERS TYPE EE FOR CORES TYPE E, ED, EE, EF AND EK FOR PRINTED CIRCUITS, MAGNETIC AXIS HORIZONTAL |
| DIN EN 61881 : 2000 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS |
| DIN 8511-2:1988-05 | FLUXES FOR BRAZING AND SOLDERING - FLUXES FOR SOLDERING |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| IEC 60068-2-3:1969 | Basic environmental testing procedures - Part 2-3: Tests - Test Ca: Damp heat, steady state |
| DIN 1707:1981-02 | SOFT SOLDERS - COMPOSITION, USE, TECHNICAL DELIVERY CONDITIONS |
| IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
| DIN IEC 60068 SUPP 1 : 1991 | ELECTRICAL ENGINEERING; BASIC ENVIRONMENTAL TESTING PROCEDURES; LIST OF TESTS AND RELEVANT STANDARDS |
| DIN 8505-1:1979-05 | BRAZING AND SOLDERING - GENERAL TERMS AND DEFINITIONS |
| ISO 2176:1995 | Petroleum products — Lubricating grease — Determination of dropping point |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.