EN 50502:2015
Current
The latest, up-to-date edition.
Railway applications - Rolling stock - Electric equipment in trolley buses - Safety requirements and current collection systems
07-08-2015
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Voltages and classification of the voltage bands
5 Trolley bus construction
6 Checks and tests
Annex A (normative) - Constructional detailed provisions
Annex B (normative) - Trolley buses - Current collection
system for overhead contact lines
Annex C (normative) - Constructional requirements for
current collection systems
Annex D (informative) - Open door interlocking
Bibliography
This European Standard applies to electrical systems on board of vehicles of the type trolleybus, as defined in 3.1, fed with a nominal line voltage (Un) between 600 V d.c. and 750 V d.c.This European Standard defines the requirements and constructional hints, especially to avoid electrical danger to the public and to staff. Where special requirements are existing for trolleybuses, hints are given for mechanical and functional safety as well as for protection against fire.This European Standard covers vehicles intended for public transport of persons. This Standard applies to:-trolleybuses,-buses with current rail for guidance in the road surface,-guided buses with bipolar roof current collector.This European Standard does not apply to:a)electric driven vehicles with only internal power supply:1)hybrid vehicles,2)diesel - electric vehicles,3)fuel - cell vehicles,4)battery vehicles,b)vehicles with safe protective bonding:1)rubber tyred commuter trains,2)guided buses with supply by a separate current rail,3)rail guided buses with unipolar roof current collector,c)vehicles operated outside publicly accessible areas:1)electric driven lorries on motorways.Guidance and current rails are special solutions and at this time are not under standardization like trolleybus current collectors and overhead contact lines (OCL).It refers mainly to earthed networks, but reference is made also to galvanically insulated networks.Annex A is related to detailed design features for trolleybuses.Annexes B and C are related to the connection systems. The detailed scope of these annexes is given in Annex B.
Committee |
CLC/TC 9X
|
DevelopmentNote |
Supersedes CLC/TS 50502 and PREN 50502. (08/2015)
|
DocumentType |
Standard
|
PublisherName |
European Committee for Standards - Electrical
|
Status |
Current
|
Supersedes |
Standards | Relationship |
UNE-EN 50502:2016 | Identical |
NEN EN 50502 : 2015 | Identical |
NF EN 50502 : 2016 | Identical |
DIN EN 50502:2016-03 | Identical |
OVE EN 50502/AC:2020 01 01 | Identical |
CEI EN 50502:2018 | Identical |
CEI EN 50502 : 2016 | Identical |
I.S. EN 50502:2015 | Identical |
NBN EN 50502 : 2015 | Identical |
PN EN 50502 : 2015 | Identical |
VDE 0115-502:2016-03 | Identical |
BS EN 50502:2015 | Identical |
ONORM OVE EN 50502 : 2016 | Identical |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
ISO 16750-2:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads |
ISO 6469-2:2009 | Electrically propelled road vehicles Safety specifications Part 2: Vehicle operational safety means and protection against failures |
ISO 16750-4:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads |
IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
IEC 61373:2010 | Railway applications - Rolling stock equipment - Shock and vibration tests |
EN 61557-2:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
ISO 16750-5:2010 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads |
ISO 23273:2013 | Fuel cell road vehicles — Safety specifications — Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen |
IEC 60322:2001 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
EN 50122-1:2011/A4:2017 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRICAL SAFETY, EARTHING AND THE RETURN CIRCUIT - PART 1: PROTECTIVE PROVISIONS AGAINST ELECTRIC SHOCK |
ISO 7637-3:2016 | Road vehicles — Electrical disturbances from conduction and coupling — Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines |
ISO 16750-1:2006 | Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 1: General |
ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
EN 50128:2011/AC:2014 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SOFTWARE FOR RAILWAY CONTROL AND PROTECTION SYSTEMS |
EN 50500 : 2008 AMD 1 2015 | MEASUREMENT PROCEDURES OF MAGNETIC FIELD LEVELS GENERATED BY ELECTRONIC AND ELECTRICAL APPARATUS IN THE RAILWAY ENVIRONMENT WITH RESPECT TO HUMAN EXPOSURE |
EN 61377-1:2006/corrigendum:2006 | RAILWAY APPLICATIONS - ROLLING STOCK - PART 1: COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL SYSTEM |
ISO 10099:2001 | Pneumatic fluid power — Cylinders — Final examination and acceptance criteria |
EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
EN 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 5: Ground vehicle installations |
IEC 60721-3-5:1997 | Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations |
EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
IEC 61000-3-12:2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
EN 61111 : 2009 | LIVE WORKING - ELECTRICAL INSULATING MATTING |
EN 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
ISO 6469-1:2009 | Electrically propelled road vehicles Safety specifications Part 1: On-board rechargeable energy storage system (RESS) |
IEC 61111:2009 | Live working - Electrical insulating matting |
IEC 60850:2014 | Railway applications - Supply voltages of traction systems |
EN 62576:2010 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
EN 60112 : 2003 AMD 1 2009 | METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS |
EN 50215:2009 | Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service |
EN 50178:1997 | Electronic equipment for use in power installations |
DIN VDE 0701-0702 : 2008-06 | INSPECTION AFTER REPAIR, MODIFICATION OF ELECTRICAL APPLIANCES - PERIODIC INSPECTION ON ELECTRICAL APPLIANCES - GENERAL REQUIREMENTS FOR ELECTRICAL SAFETY |
IEC 62576:2009 | Electric double-layer capacitors for use in hybrid electric vehicles - Test methods for electrical characteristics |
EN 50124-1:2017 | Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment |
IEC 61557-2:2007 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: Insulation resistance |
EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
ISO 16750-3:2012 | Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads |
EN 50119 : 2009 AMD 1 2013 | RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES |
EN 50110-1:2013 | Operation of electrical installations - Part 1: General requirements |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
EN 50129 : 2003 COR 2010 | RAILWAY APPLICATIONS - COMMUNICATION, SIGNALLING AND PROCESSING SYSTEMS - SAFETY RELATED ELECTRONIC SYSTEMS FOR SIGNALLING |
EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
ISO 9001:2015 | Quality management systems — Requirements |
EN 61000-3-12:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-12: LIMITS - LIMITS FOR HARMONIC CURRENTS PRODUCED BY EQUIPMENT CONNECTED TO PUBLIC LOW-VOLTAGE SYSTEMS WITH INPUT CURRENT > 16 A AND <= 75 A PER PHASE (IEC 61000-3-12:2011) |
ISO 6469-3:2011 | Electrically propelled road vehicles Safety specifications Part 3: Protection of persons against electric shock |
EN 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
EN 50355:2013 | Railway applications - Railway rolling stock cables having special fire performance - Guide to use |
EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
EN 61557-8:2015/AC:2016-06 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
IEC 61557-8:2014 | Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems |
EN 45545-5:2013+A1:2015 | Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles |
EN 61287-1:2014/AC:2014 | RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014) |
EN 60322:2001 | Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction |
IEC 60445:2017 | Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors |
IEC 61377-1:2006 | Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system |
EN 50272-3 : 2002 COR 2003 | SAFETY REQUIREMENTS FOR SECONDARY BATTERIES AND BATTERY INSTALLATIONS - PART 3: TRACTION BATTERIES |
IEC 62196-1:2014 | Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements |
IEC 60310:2016 | Railway applications - Traction transformers and inductors on board rolling stock |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.