EN 60309-2:1999/A2:2012
Current
Current
The latest, up-to-date edition.
PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 2: DIMENSIONAL INTERCHANGEABILITY REQUIREMENTS FOR PIN AND CONTACT-TUBE ACCESSORIES (IEC 60309-2:1999/A2:2012)
Amendment of
Published date
27-04-2012
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Definitions
3 Normative references
4 General
5 Standard ratings
6 Classification
7 Marking
8 Dimensions
9 Protection against electric shock
10 Provision for earthing
11 Terminals and terminations
12 Interlocks and retaining devices
13 Resistance to ageing of rubber and thermoplastic
material
14 General construction
15 Construction of socket-outlets
16 Construction of plugs and connectors
17 Construction of appliance inlets
18 Degrees of protection
19 Insulation resistance and dielectric strength
20 Breaking capacity
21 Normal operation
22 Temperature rise
23 Flexible cables and their connection
24 Mechanical strength
25 Screws, current-carrying parts and connections
26 Creepage distances, clearances and distances through
sealing compound
27 Resistance to heat, fire and tracking
28 Corrosion and resistance to rusting
29 Conditional short-circuit current withstand test
30 Electromagnetic compatibility
Standards sheets
Annex AA (informative) List of the clause numbers that require
re-testing
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Annex ZB (normative) Special national conditions
Annex ZC (normative) References to Series II and/or AWG/MCM
cables which are excluded from this standard
Pertains to plugs and socket-outlets, cable couplers with a rated operating voltage not exceeding 1000 V, 500 Hz and a rated current not exceeding 125 A, primarily intended for industrial use, either indoor or outdoors.
| Committee |
TC 23H
|
| DevelopmentNote |
To be read in conjunction with EN 60309-1 (12/2003) Supersedes HD 196. (03/2004) AMD 11 2004 is superseded by AMD 1 2007. (10/2014)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| UNE-EN 60309-2:2001 | Identical |
| OVE/ONORM EN 60309-2 : 2013 | Identical |
| NF EN 60309-2 : 1999 AMD 2 2012 | Identical |
| BS EN 60309-2 : 1999 | Identical |
| DIN EN 60309-2 : 2013 | Identical |
| CEI EN 60309-2/A2:2012 | Identical |
| I.S. EN 60309-2:1999 | Identical |
| SN EN 60309-2 : 1999 AMD 11 2004 | Identical |
| VDE 0623-2 : 2013 | Identical |
| PN EN 60309-2 : 2002 AMD 2 2012 | Identical |
| IEC 60309-2:1999+AMD1:2005+AMD2:2012 CSV | Identical |
| VDE 0623-20 : 2000 AMD 11 2004 | Identical |
| NBN EN 60309-2 : 2000 AMD 3 2012 | Identical |
| NEN EN IEC 60309-2 : 1999 AMD 2 2012 | Identical |
| BS EN 60309-2:1999+A2:2012 | Identical |
| I.S. EN 60092-507:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| I.S. HD 384-7-708:2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| S.R. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
| UNE-HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
| HD 60364-7-708:2017 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| S.R. HD 60364-7-708:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS |
| BS EN 61029-1 : 2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| CEI EN 60092-507 : 2016 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| 08/30186439 DC : DRAFT SEP 2008 | BS EN 15869-2 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| BS EN 60092-507:2015 | Electrical installations in ships Small vessels |
| I.S. EN 12649:2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| I.S. EN 60694:1999 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| I.S. EN 50144-1:1998 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| S.R. HD 60364-7-709:2009 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS |
| I.S. HD 60364-7-705:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES (IEC 60364-7-705:2006 (MOD)) |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| BS EN 13718-1:2014 | Medical vehicles and their equipment. Air ambulances Requirements for medical devices used in air ambulances |
| EN 60694:1996/A2:2001 | COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS |
| HD 384.7.708 : 2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 708: ELECTRICAL INSTALLATIONS IN CARAVAN PARKS |
| HD 60364-7-717:2010/AC:2014 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 60439-4:2004 | Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS) |
| EN 12649:2008+A1:2011 | Concrete compactors and smoothing machines - Safety |
| 08/30186443 DC : DRAFT SEP 2008 | BS EN 15869-3 - INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 32 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| NF EN 15869-2 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| BS EN 50091-1-2:1999 | General and safety requirements for UPS used in restricted access locationsSpecification for uninterruptible power systems (UPS) |
| CEI EN 61316 : 2000 | INDUSTRIAL CABLE REELS |
| BS EN 13976-1:2011 | Rescue systems. Transportation of incubators Interface conditions |
| 13/30276231 DC : 0 | BS EN 13718-1 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| HD 60364-7-704:2018 | Low voltage electrical installations - Part 7-704: Requirements for special installations or locations - Construction and demolition site installations |
| BS EN 61316:2000 | Industrial cable reels |
| I.S. HD 384-7-754:2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS |
| I.S. EN 60335-1:2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS |
| BS EN 50144-1:1999 | Safety of hand-held electric motor operated tools General requirements |
| S.R. HD 60364-7-730:2015 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-730: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ONSHORE UNITS OF ELECTRICAL SHORE CONNECTIONS FOR INLAND NAVIGATION VESSELS |
| CEI R069-001 : 2004 | AC CONNECTION DEVICES FOR ELECTRIC VEHICLE CONDUCTIVE CHARGING |
| I.S. HD 60364-7-721:2009 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS |
| DIN EN 15869-3:2010-06 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| VDE 0623-100 : 2000-09 | INDUSTRIAL CABLE REELS |
| EN 13976-1:2011 | Rescue systems - Transportation of incubators - Part 1: Interface conditions |
| UNE-EN 15869-2:2011 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| DIN EN 15869-2:2010-06 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| DIN EN 61316 : 2000-09 | INDUSTRIAL CABLE REELS |
| UNI EN 13718-1 : 2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| VDE 0129-507 : 2001 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: PLEASURE CRAFT (IEC 60092-507:2000) |
| BS EN 50250 : 2002 | CONVERSION ADAPTORS FOR INDUSTRIAL USE |
| HD 60364-7-709:2009/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS |
| 09/30205924 DC : 0 | BS EN 13976-1 - RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS |
| NF EN 61029-1 : 2009 AMD 11 2011 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| HD 60364-7-705:2007/A12:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-705: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - AGRICULTURAL AND HORTICULTURAL PREMISES |
| I.S. EN 50091-1-2:2003 | |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| S.R. HD 60364-5-551:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
| BS EN 60335-1 : 2012 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| I.S. HD 60364-7-704:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-704: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONSTRUCTION AND DEMOLITION SITE INSTALLATIONS |
| BS EN 15869-3:2010 | Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz On-board unit, safety requirements |
| UNE-EN 13976-1:2011 | Rescue systems - Transportation of incubators - Part 1: Interface conditions |
| I.S. HD 60364-7-717:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-717: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MOBILE OR TRANSPORTABLE UNITS |
| S.R. HD 60364-7-722:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-722: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SUPPLIES FOR ELECTRIC VEHICLES |
| DIN EN 12649:2011-09 | Concrete compactors and smoothing machines - Safety |
| DIN EN 13718-1:2014-12 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| BS EN 12649 : 2008 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 12649 : 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNI EN 15869-2 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| I.S. HD 60364-7-708:2009 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-708: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CARAVAN PARKS, CAMPING PARKS AND SIMILAR LOCATIONS |
| I.S. EN 15869-3:2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| 96/211090 DC : 0 | CLC/TC 61F(SECRETARIAT)237 - COMMON MODIFICATIONS TO IEC 61029-2-6 FIRST EDITION) - PARTICULAR REQUIREMENTS FOR DIAMOND DRILLS WITH WATER SUPPLY |
| I.S. EN 50250:2002 | CONVERSION ADAPTERS FOR INDUSTRIAL USE |
| I.S. EN 15869-2:2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 2: ONSHORE UNIT, SAFETY REQUIREMENTS |
| I.S. EN 60439-4:2004 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 4: PARTICULAR REQUIREMENTS FOR ASSEMBLIES FOR CONSTRUCTION SITES (ACS) |
| UNI EN 13976-1 : 2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS |
| I.S. HD 60364-7-740:2006 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES |
| BS EN 15869-2:2010 | Inland navigation vessels. Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz Onshore unit, safety requirements |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| BS EN 60439-4:2004 | Low-voltage switchgear and controlgear assemblies Particular requirements for assemblies for construction sites (ACS) |
| UNE-EN 12649:2009 | Concrete compactors and smoothing machines - Safety |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| I.S. EN 13718-1:2014 | MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 1: REQUIREMENTS FOR MEDICAL DEVICES USED IN AIR AMBULANCES |
| EN 60092-507:2015/AC:2015 | ELECTRICAL INSTALLATIONS IN SHIPS - PART 507: SMALL VESSELS |
| UNE-EN 60335-1:2012 | Household and similar electrical appliances - Safety - Part 1: General requirements |
| UNE-HD 60364-7-721:2011 | Low-voltage electrical installations - Part 7-721: Requirements for special installations or locations - Electrical installations in caravans and motor caravans |
| EN 15869-2:2010 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 2: Onshore unit, safety requirements |
| EN 15869-3:2010 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements |
| NF EN 61316 : 2000 | INDUSTRIAL CABLE REELS |
| 96/211091 DC : DRAFT AUG 1996 | CLC/TC 61F(SECRETARIAT)238 - COMMON MODIFICATIONS TO IEC 61029-2-7 (FIRST EDITION) - PARTICULAR REQUIREMENTS FOR DIAMOND SAWS WITH WATER SUPPLY |
| UNE-HD 60364-7-709:2011 | Low-voltage electrical installations -- Part 7-709: Requirements for special installations or locations - Marinas and similar locations |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| BS EN 60694:1997 | Common specifications for high-voltage switchgear and controlgear standards |
| HD 60364-7-721:2009/corrigendum:2010 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-721: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR CARAVANS |
| NF EN 12649 : 2008 + A1 2011 | CONCRETE COMPACTORS AND SMOOTHING MACHINES - SAFETY |
| UNE-EN 15869-3:2011 | Inland navigation vessels - Electrical shore connection, three phase current 400 V, up to 63 A, 50 Hz - Part 3: On-board unit, safety requirements |
| NF EN 15869-3 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION THREE PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| HD 60364-7-722:2016 | Low-voltage electrical installations - Part 7-722: Requirements for special installations or locations - Supplies for electric vehicles |
| I.S. HD 60364-7-709:2009 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-709: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - MARINAS AND SIMILAR LOCATIONS (IEC 60364-7-709:2007 (MOD)) |
| UNE-HD 60364-7-708:2018 | Low-voltage electrical installations - Part 7-708: Requirements for special installations or locations - Caravan parks, camping parks and similar locations |
| S.R. HD 60364-7-740:2006 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES |
| I.S. EN 61029-1:2009 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| S.R. HD 60364-7-704:2007 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-704: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - CONSTRUCTION AND DEMOLITION SITE INSTALLATIONS |
| UNI EN 15869-3 : 2010 | INLAND NAVIGATION VESSELS - ELECTRICAL SHORE CONNECTION, THREE-PHASE CURRENT 400 V, UP TO 63 A, 50 HZ - PART 3: ON-BOARD UNIT, SAFETY REQUIREMENTS |
| DIN EN 13976-1:2016-03 (Draft) | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS |
| I.S. EN 13976-1:2011 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS |
| UNE-HD 60364-7-730:2016 | Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels |
| EN 50250 : 2002 AMD 1 2015 | CONVERSION ADAPTERS FOR INDUSTRIAL USE |
| EN 61029-1:2009/A11:2010 | SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
| DIN EN 13976-1:2011-08 | RESCUE SYSTEMS - TRANSPORTATION OF INCUBATORS - PART 1: INTERFACE CONDITIONS |
| HD 60364-7-740:2006/A11:2017 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7-740: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - TEMPORARY ELECTRICAL INSTALLATIONS FOR STRUCTURES, AMUSEMENT DEVICES AND BOOTHS AT FAIRGROUNDS, AMUSEMENT PARKS AND CIRCUSES |
| HD 60364-7-730:2015 | Low-voltage electrical installations - Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels |
| HD 60364-5-551:2010/A11:2016 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 5-55: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - OTHER EQUIPMENT - CLAUSE 551: LOW-VOLTAGE GENERATING SETS |
| EN 50091-1-2 : 98 COR 1 99 | |
| EN 50144-1 : 98 COR 2005 | SAFETY OF HAND-HELD ELECTRIC MOTOR OPERATED TOOLS - PART 1: GENERAL REQUIREMENTS |
| HD 384.7.754 : 2005 | ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 7: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SECTION 754: ELECTRICAL INSTALLATIONS IN CARAVANS AND MOTOR-CARAVANS |
| UNE-HD 60364-7-717:2013 | Low-voltage electrical installations -- Part 7-717: Requirements for special installations or locations - Mobile or transportable units |
| UNE-HD 60364-5-551:2013 | Low-voltage electrical installations -- Part 5-55: Selection and erection of electrical equipment - Other equipment -- Clause 551: Low-voltage generating sets |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| HD 60364-4-41:2017/A11:2017 | LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK |
| EN 60617-2 : 1996 | GRAPHICAL SYMBOLS FOR DIAGRAMS - SYMBOL ELEMENTS. QUALIFYING SYMBOLS AND OTHER SYMBOLS HAVING GENERAL APPLICATION |
| IEC 60617-2:1996 | Graphical symbols for diagrams - Partie 2: Symbol elements, qualifying symbols and other symbols having general application |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.