EN 60603-2:1998/A1:2005
Current
Current
The latest, up-to-date edition.
CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
Amendment of
Published date
11-05-2005
Sorry this product is not available in your region.
Foreword
1 Scope
2 Normative references
3 IEC type designation
4 Common features
4.1 Mounting dimensions
4.2 Mating information
4.3 Survey of styles
5 Dimensions
5.1 General
5.2 Fixed board connectors
5.3 Free board connectors
5.4 Mating information
5.5 Accessories
5.6 Mounting information for fixed board connectors
5.7 Mounting information for free board connectors
6 Gauges
6.1 Sizing gauges and retention force gauges
6.2 Test panel (for voltage proof test)
7 Characteristics
7.1 Climatic category
7.2 Electrical
7.3 Mechanical
8 Test schedule
8.1 General
9 Quality assessment procedures
9.1 Qualification approval testing
9.2 Quality conformance inspection
9.3 Delayed delivery, re-inspection
10 Ordering information
Annex A (normative) Test phase BP 3.2: Corrosion industrial
atmosphere
Annex B (informative) Special contacts for connectors Style M
Annex C (normative) Inductance test method
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Applicable to groups of related connectors to be used with printed boards. Include connectors with high contact density for low-voltage applications and range to connectors for heavy currents and high voltages with fewer contacts.
| Committee |
SR 48B
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Current
|
| Standards | Relationship |
| IEC 60603-2:1995 | Identical |
| IEC 60603-2:1995/AMD1:2000 | Identical |
| NBN EN 60603-2 : 1999 AMD 1 2007 | Identical |
| NEN EN IEC 60603-2 : 1998 AMD 1 2005 | Identical |
| I.S. EN 60603-2:1998 | Identical |
| PN EN 60603-2 : 2002 AMD 1 2005 | Identical |
| SN EN 60603-2 : 1998 | Identical |
| CEI EN 60603-2/A1:2006 | Identical |
| BS EN 60603-2:1998 | Identical |
| NF EN 60603-2 : 1999 AMD 1 2005 | Identical |
| DIN EN 60603-2:2006-04 | Identical |
| BS EN 60297-3-101:2004 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6 mm (19 in) series Subracks and associated plug-in units |
| EN 60297-3-101:2004 | Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units |
| EN 61076-4-113:2003 | Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| I.S. EN 60297-3-101:2004 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-101: SUBRACKS AND ASSOCIATED PLUG-IN UNITS |
| CEI EN 60297-3-104 : 2006 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-104: CONNECTOR DEPENDENT INTERFACE DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS |
| BS EN 61076-4-113:2003 | Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications |
| BS EN 60297-3-104:2006 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482,6mm(19 in) series Connector dependent interface dimensions of subracks and plug-in units |
| BS EN 60297-5-100:2001 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in units Design overview |
| I.S. EN 61076-4-113:2003 | CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS |
| CEI EN 60297-3-101 : 2005 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-101: SUBRACKS AND ASSOCIATED PLUG-IN UNITS |
| I.S. EN 60297-3-104:2006 | MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT - DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482,6 MM (19 IN) SERIES - PART 3-104: CONNECTOR DEPENDENT INTERFACE DIMENSIONS OF SUBRACKS AND PLUG-IN UNITS |
| BS EN 60297-5-107:2001 | Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Subracks and associated plug-in units Rear mounted plug-in units |
| EN 60297-3-104:2006 | Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units |
| ISO 272:1982 | Fasteners — Hexagon products — Widths across flats |
| IEC 60512-8:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| EN 60097:1993 | Grid systems for printed circuits |
| HD 142 : 200S3 | TERMS AND DEFINITIONS FOR PRINTED CIRCUITS |
| IEC 60512-6:1984 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 6: Climatic tests and soldering tests |
| IEC 60068-2-60:2015 RLV | Environmental testing - Part 2-60: Tests - Test Ke: Flowing mixed gas corrosion test |
| IECQ 001002-3:2005 | IEC QUALITY ASSESSMENT SYSTEM FOR ELECTRONIC COMPONENTS (IECQ) - RULES OF PROCEDURE - PART 3: APPROVAL PROCEDURES |
| EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
| IEC 60512-7:1993 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 7: Mechanical operating tests and sealing tests |
| IEC 60097:1991 | Grid systems for printed circuits |
| EN 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| ISO 468:1982 | Surface roughness — Parameters, their values and general rules for specifying requirements |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| IEC 60512-4:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 4: Dynamic stress tests |
| EN 60603-1:1998 | Connectors for frequencies below 3 MHz for use with printed boards - Part 1: Generic specification - General requirements and guide for the preparation of detail specifications, with assessed quality |
| IEC 60512-9:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 9: Miscellaneous tests |
| IEC 60352-2:2006+AMD1:2013 CSV | Solderless connections - Part 2: Crimped connections - Generalrequirements, test methods and practical guidance |
| EN 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| EN 60999-1:2000 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm² up to 35 mm² (included) |
| EN 60352-4:1994/A1:2000 | SOLDERLESS CONNECTIONS - PART 4: SOLDERLESS NON-ACCESSIBLE INSULATION DISPLACEMENT CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60512-5:1992 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods - Part 5: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests |
| IEC 60512-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 1: General |
| IEC 60326-3:1991 | Printed boards - Part 3: Design and use of printed boards |
| IEC 60512-3:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
| EN 60999-1:1993/corrigendum:1997 | CONNECTING DEVICES - SAFETY REQUIREMENTS FOR SCREW-TYPE AND SCREWLESS-TYPE CLAMPING UNITS FOR ELECTRICAL COPPER CONDUCTORS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.