EN 60695-2-10:2013
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
Superseded date
03-01-2022
Superseded by
Published date
28-06-2013
Sorry this product is not available in your region.
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Description of the test apparatus
5 Verification of the apparatus
6 Conditioning
7 Common test procedure
Annex A (informative) - Equipment manufacturers and suppliers
Annex B (informative) - Guidance on "ignition" and "flaming"
observations
Annex C (informative) - Guidance on the verification procedure
of the glow-wire temperature measuring system by
the heating current
Bibliography
Annex ZA (normative) - Normative references to international
Publications with their corresponding
European publications
IEC 60695-2-10:2013 specifies the glow-wire apparatus and common test procedure to simulate the effects of thermal stresses which may be produced by heat sources such as glowing elements or overloaded resistors, for short periods, in order to assess the fire hazard by a simulation technique. The test procedure described in this standard is a common test procedure intended for the small-scale tests in which a standardized electrically heated wire is used as a source of ignition. It is a common part of the test procedures applied to end products and to solid electrical insulating materials or other solid combustible materials. A detailed description of each particular test procedure is given in the respective standards IEC 60695-2-11, IEC 60695-2-12 and IEC 60695-2-13. This second edition of IEC 60695-2-10 cancels and replaces the first edition of IEC 60695-2-10 published in 2000. This edition constitutes a technical revision. The main changes with respect to the previous edition are as follows: - A table of contents has been added. - The introduction has been updated to align with other TC89 documents. - The scope has been clarified to align with other documents in the IEC 60695-2 Glow-wire series. - Terms and definitions relevant to this document have been added. - Clause 4 has been deleted and the remaining clauses renumbered. - The description of the power supply has been updated with additional details (see 4.1). - The temperature measuring system (see 4.3) and the description of the specified layer has been updated (see 4.4). - New guidance has been introduced to assist in the verification of the temperature measuring system (see 5.2 and Annex C). - The common test produced has been clarified (see Clause 7). - The tolerances have been changed for the dimensions of the glow-wire (see Figure 1). - New guidance on flaming observations has been added (see Annex B). It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-2-11, IEC 60695-2-12, and IEC 60695-2-13. Keywords: Glowing/hot-wire, Glow-wire.
| Committee |
CLC/SR 89
|
| DevelopmentNote |
Supersedes EN 60695-2-1-0. (03/2004) To be used in conjunction with EN 60695-2-11, EN 60695-2-12 and EN 60695-2-13. (05/2005)
|
| DocumentType |
Standard
|
| PublisherName |
European Committee for Standards - Electrical
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| VDE 0471-2-10 : 2014 | Identical |
| NBN EN 60695 2-10 : 2013 | Identical |
| UNE-EN 60695-2-10:2013 | Identical |
| NEN EN IEC 60695-2-10 : 2013 | Identical |
| NF EN 60695-2-10 : 2013 | Identical |
| DIN EN 60695-2-10 : 2014 | Identical |
| I.S. EN 60695-2-10:2013 | Identical |
| SN EN 60695-2-10 : 2001 | Identical |
| BS EN 60695-2-10:2013 | Identical |
| SN EN 60695-2-10:2013 | Identical |
| PN EN 60695-2-10 : 2013 | Identical |
| IEC 60695-2-10:2013 | Identical |
| CEI EN 60695-2-10 : 2014 | Identical |
| OVE/ONORM EN 60695-2-10 : 2014 | Identical |
| BS EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screw-type clamping units |
| I.S. EN 61810-1:2015 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| 11/30233201 DC : 0 | BS EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| EN 60947-5-1:2017 | Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices |
| UNE-EN 60252-1:2011 | AC motor capacitors -- Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation |
| CEI EN 50557 : 2012 | REQUIREMENTS FOR AUTOMATIC RECLOSING DEVICES (ARDS) FOR CIRCUIT BREAKERS-RCBOS-RCCBS FOR HOUSEHOLD AND SIMILAR USES |
| EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| I.S. EN 61199:2011 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
| I.S. EN 62052-21:2004 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| I.S. EN 61810-7:2006 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES |
| I.S. EN 60998-2-2:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS |
| CEI EN 61095 : 2010 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN 60269-1:2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 61242 : 1998 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN 61347-1:2015 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| BS EN 61730-1 : 2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| I.S. EN 62560:2012/A11:2019 | SELF-BALLASTED LED-LAMPS FOR GENERAL LIGHTING SERVICES BY VOLTAGE > 50 V - SAFETY SPECIFICATIONS |
| BS EN 60252-1 : 2011 | AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION |
| I.S. EN 60998-2-1:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS |
| BS EN 60238 : 2004 | EDISON SCREW LAMPHOLDERS |
| I.S. EN 60695-2-11:2014 | FIRE HAZARD TESTING - PART 2-11: GLOWING/HOTWIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) |
| I.S. EN 60252-2:2011 | AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010 (EQV)) |
| UNE-EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| UNE-EN 60320-1:2016 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
| BS EN 61558-1 : 2005 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| BS EN 61347-1:2015 | Lamp controlgear General and safety requirements |
| BS EN 62477-1 : 2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012) |
| EN 61347-1:2015 | Lamp controlgear - Part 1: General and safety requirements |
| EN 60269-1:2007/A2:2014 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS (IEC 60269-1:2006/A2:2014) |
| EN 61058-1:2002/A2:2008 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| EN 61558-1:2005/A1:2009 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services - Safety requirements |
| EN 60730-1:2016 | Automatic electrical controls - Part 1: General requirements |
| EN 60998-2-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
| EN 61199:2011/A2:2015 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014) |
| EN 60252-1 : 2011 AMD 1 2013 | AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010/A1:2013) |
| EN 62606:2013/A1:2017 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES (IEC 62606:2013/A1:2017) |
| EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| EN 60947-6-2:2003/A1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 6-2: MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| EN IEC 61730-2:2018/AC:2018-06 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
| CEI EN 62532 : 2012 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
| I.S. EN 60998-1:2004 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60695-2-13 : 2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| PREN 61008-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| BS EN 62314:2006 | Solid-state relays |
| 11/30233197 DC : 0 | BS EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| BS EN 60695-2-12 : 2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| BS EN 62208:2011 | Empty enclosures for low-voltage switchgear and controlgear assemblies. General requirements |
| CEI EN 60695-2-11 : 2014 | FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) |
| 03/307802 DC : DRAFT MAY 2003 | EN 61008-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
| I.S. EN 62477-1:2012 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL |
| BS EN 60269-1 : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62606:2013 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
| PREN 61009-1 : DRAFT 2011 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| CEI EN 61810-1 : 2016 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| EN 61242:1997/A13:2017 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| CEI EN 62208 : 2012 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| I.S. EN 62931:2017 | GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
| I.S. EN 60898-1:2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD)) |
| BS EN 61058-1 : 2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 62052-21 : 2004 | ELECTRICITY METERING EQUIPMENT (A.C.) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004) |
| I.S. EN 61058-1:2002 | SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
| BS EN 60947-1 : 2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| I.S. EN 50470-1:2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| UNE-EN 62532:2011 | Fluorescent induction lamps - Safety specifications |
| UNE-EN 62035:2015 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| I.S. EN 62035:2014 | DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS |
| I.S. EN 61800-5-1:2007 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY |
| EN 60947-1:2007/A2:2014 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES (IEC 60947-1:2007/A2:2014) |
| EN 61800-5-1:2007/A1:2017 | ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS - PART 5-1: SAFETY REQUIREMENTS - ELECTRICAL, THERMAL AND ENERGY (IEC 61800-5-1:2007/A1:2016) |
| UNE-EN 50557:2012 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| I.S. EN 61008-1:2012&A1:2014/ac&A2:2014...A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES |
| UNE-EN 61008-1:2013 | Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1: General rules |
| BS EN 60968:2015 | Self-ballasted fluorescent lamps for general lighting services. Safety requirements |
| CEI EN 62052-21 : 2005 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT |
| BS EN 60512-20-3:2010 | Connectors for electronic equipment. Tests and measurements Fire hazard tests. Test 20c. Flammability, glow-wire |
| 03/307803 DC : DRAFT MAY 2003 | EN 61009-1 - RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCB'S) - PART 1: GENERAL RULES |
| BS EN 60598-1:2015 | Luminaires General requirements and tests |
| BS EN 60998-2-2:2004 | Connecting devices for low voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| UNE-EN 61730-1:2007 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| BS EN 60252-2 : 2011 | AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS |
| BS EN 61008-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| UNE-EN 62208:2012 | Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements |
| I.S. EN 60598-1:2015 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 50470-1 : 2007 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| I.S. EN 50065-4-7:2005 | SIGNALLING ON LOW-VOLTAGE ELECTRICAL INSTALLATIONS IN THE FREQUENCY RANGE 3 KHZ TO 148,5 KHZ AND 1,6 MHZ TO 30 MHZ - PART 4-7: PORTABLE LOW VOLTAGE DECOUPLING FILTERS - SAFETY REQUIREMENTS |
| I.S. EN 62752:2016/AC:2019-03 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| BS EN 60934 : 2001 | CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) |
| I.S. EN 62776:2015 | DOUBLE-CAPPED LED LAMPS DESIGNED TO RETROFIT LINEAR FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
| I.S. EN 61439-1:2011 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: GENERAL RULES (IEC 61439-1:2011) |
| CEI EN 62606 : 2014 | GENERAL REQUIREMENTS FOR ARC FAULT DETECTION DEVICES |
| PREN 50630 : DRAFT 2014 | BS EN 50630 - TIME-DELAYED RESIDUAL CURRENT OPERATED CIRCUIT BREAKERS TYPE M WITHOUT OVER-CURRENT PROTECTION OR APPLICATION IN CIRCUITS WITH RATED CURRENTS GREATER ABOVE 32 A |
| EN IEC 62688:2018 | Concentrator photovoltaic (CPV) modules and assemblies - Safety qualification |
| HD 62640:2015/A11:2016 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| EN 62931:2017 | GX16t-5 capped tubular led lamp - Safety specifications |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| UNE-EN 61347-1:2016 | Lamp controlgear - Part 1: General and safety requirements |
| BS EN 61800-5-1:2007 | Adjustable speed electrical power drive systems Safety requirements. Electrical, thermal and energy |
| UNE-EN 50521:2010 | Connectors for photovoltaic systems - Safety requirements and tests |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| UNE-EN 60730-1:2013 | Automatic electrical controls for household and similar use - Part 1: General requirements |
| EN 60898-1:2003/A13:2012 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED) |
| I.S. EN 60320-1:2015 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
| EN 61008-1:2012/A12:2017 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCCBS) - PART 1: GENERAL RULES (IEC 61008-1:2010, MODIFIED) |
| 14/30317282 DC : 0 | BS EN 60968:2014+A1 - SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
| CEI EN 62931 : 1ED 2017 | GX16T-5 CAPPED TUBULAR LED LAMP - SAFETY SPECIFICATIONS |
| CEI EN 60512-20-3 : 2011 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 20-3: FIRE HAZARD TESTS - TEST 20C: FLAMMABILITY, GLOW-WIRE |
| I.S. EN 60252-1:2011 | AC MOTOR CAPACITORS - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING - SAFETY REQUIREMENTS - GUIDANCE FOR INSTALLATION AND OPERATION (IEC 60252-1:2010 (EQV)) |
| CEI EN 62314 : 2007 | SOLID-STATE RELAYS |
| BS EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| I.S. EN 60695-2-13:2010 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS |
| CEI EN 61347-1 : 2016 | LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS |
| CEI EN 60998-1 : 2005 | CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 1: GENERAL REQUIREMENTS |
| BS EN 62094-1:2003 | Indicator light units for household and similar fixed-electrical installations General requirements |
| BS EN 61810-7:2006 | Electromechanical elementary relays Test and measurement procedures |
| BS EN 60998-2-3:2004 | Connecting devices for low-voltage circuits for household and similar purposes Particular requirements for connecting devices as separate entities with insulation-piercing clamping units |
| I.S. EN 60968:2015 | SELF-BALLASTED FLUORESCENT LAMPS FOR GENERAL LIGHTING SERVICES - SAFETY REQUIREMENTS |
| BS EN 61810-1:2015 | Electromechanical elementary relays General and safety requirements |
| UNE-EN 60695-2-11:2015 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| I.S. EN 62532:2011 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
| EN 61810-1:2015/AC:2018-04 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 1: GENERAL AND SAFETY REQUIREMENTS (IEC 61810-1:2015/COR1:2018) |
| BS EN 50470-1 : 2006 | ELECTRICITY METERING EQUIPMENT (A.C.) - PART 1: GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - METERING EQUIPMENT (CLASS INDEXES A, B AND C) |
| BS EN 61199 : 2011 | SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS |
| EN 60598-1:2015/A1:2018 | LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS |
| CEI EN 61810-7 : 2006 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 7: TEST AND MEASUREMENT PROCEDURES |
| UNE-EN 60598-1:2015 | Luminaires - Part 1: General requirements and tests |
| I.S. EN 60730-1:2016 | AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
| I.S. EN 62208:2011 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS (IEC 62208:2011) |
| I.S. EN 61558-1:2006 | SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS |
| I.S. EN 60439-1:2000 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| I.S. EN 60512-20-3:2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 20-3: FIRE HAZARD TESTS - TEST 20C: FLAMMABILITY, GLOW-WIRE |
| I.S. EN 61549:2003 | MISCELLANEOUS LAMPS (IEC 61549:2003 (EQV)) |
| UNE-HD 62640:2016 | Residual current devices with or without overcurrent protection for socket-outlets for household and similar uses |
| BS EN 60730-1:2011 | Automatic electrical controls for household and similar use General requirements |
| UNE-EN 61009-1:2013 | Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs) - Part 1: General rules |
| EN 62752:2016 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| EN 60669-1:2018 | Switches for household and similar fixed electrical installations - Part 1: General requirements |
| BS EN 60898-1 : 2003 | ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION |
| BS EN 60439-1:1999 | Low-voltage switchgear and controlgear assemblies Type-tested and partially type-tested assemblies |
| BS EN 50521 : 2009 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| 08/30179116 DC : DRAFT MAR 2008 | BS EN 50521 - CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 61009-1 : 2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| UNE-EN 62560:2013 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications |
| EN 61009-1:2012/A12:2016 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| EN 60320-1:2015/AC:2016 | APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60320-1:2015/COR1:2016) |
| UNE-EN 61549:2004 | Miscellaneous lamps |
| BS EN 60947-6-2:2003 | Low-voltage switchgear and controlgear Multiple function equipment. Control and protective switching devices (or equipment) (CPS) |
| UNE-EN 61199:2012 | Single-capped fluorescent lamps - Safety specifications |
| CEI EN 62752 : 1ED 2017 | IN-CABLE CONTROL AND PROTECTION DEVICE FOR MODE 2 CHARGING OF ELECTRIC ROAD VEHICLES (IC-CPD) |
| I.S. EN 60238:2004 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004 (EQV)) |
| DIN EN 50298 : 1999 | EMPTY ENCLOSURES FOR LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - GENERAL REQUIREMENTS |
| BS EN 62931:2017 | GX16t-5 capped tubular led lamp. Safety specifications |
| BS EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps. Safety specifications |
| UNE-EN 60695-2-13:2011 | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods - Glow-wire ignition temperature (GWIT) test method for materials |
| BS EN 60695-2-11:2014 | Fire hazard testing Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products (GWEPT) |
| BS EN 61095:1993 | Specification for electromechanical contactors for household and similar purposes |
| BS EN 62020:1999 | Electrical accessories. Residual current monitors for household and similar uses (RCMs) |
| BS EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes General requirements |
| PRHD 62640 : DRAFT 2014 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES (IEC 62640:2011, MODIFIED) |
| I.S. EN 60695-2-12:2010 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS |
| I.S. EN 60947-6-2:2003 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - MULTIPLE FUNCTION EQUIPMENT - CONTROL AND PROTECTIVE SWITCHING DEVICES (OR EQUIPMENT) (CPS) |
| I.S. EN 50521:2008 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| BS EN 62532 : 2011 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
| I.S. EN 60947-1:2007 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 1: GENERAL RULES |
| EN 50470-1:2006 | Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C) |
| BS EN 62560:2012+A11:2019 | Self-ballasted LED-lamps for general lighting services by voltage > 50 V. Safety specifications |
| I.S. EN 61730-1:2007 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION |
| BS EN 61549 : 2003 | MISCELLANEOUS LAMPS |
| UNE-EN 62776:2015 | Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications |
| I.S. EN IEC 61730-2:2018 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
| BS EN 62606:2013 | General requirements for arc fault detection devices |
| I.S. EN 60947-5-1:2017 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 5-1: CONTROL CIRCUIT DEVICES AND SWITCHING ELEMENTS - ELECTROMECHANICAL CONTROL CIRCUIT DEVICES |
| I.S. EN 61095:2009 | ELECTROMECHANICAL CONTACTORS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN IEC 62688:2018 | CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES AND ASSEMBLIES - SAFETY QUALIFICATION |
| UNE-EN 60695-2-12:2011 | Fire hazard testing -- Part 2-12: Glowing/hot-wire based test methods - Glow-wire flammability index (GWFI) test method for materials |
| UNE-EN 62752:2017 | In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) |
| I.S. HD 62640:2015 | RESIDUAL CURRENT DEVICES WITH OR WITHOUT OVERCURRENT PROTECTION FOR SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR USES |
| BS EN 62035:2014 | Discharge lamps (excluding fluorescent lamps). Safety specifications |
| I.S. EN 61009-1:2012 | RESIDUAL CURRENT OPERATED CIRCUIT-BREAKERS WITH INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USES (RCBOS) - PART 1: GENERAL RULES |
| I.S. EN 61242:1999 | ELECTRICAL ACCESSORIES - CABLE REELS FOR HOUSEHOLD AND SIMILAR PURPOSES |
| I.S. EN 62314:2006 | SOLID-STATE RELAYS |
| EN 62477-1:2012/A1:2017 | SAFETY REQUIREMENTS FOR POWER ELECTRONIC CONVERTER SYSTEMS AND EQUIPMENT - PART 1: GENERAL (IEC 62477-1:2012/A1:2016) |
| UNE-EN 61439-1:2012 | Low-voltage switchgear and controlgear assemblies - Part 1: General rules |
| BS EN 61439-1:2011 | Low-voltage switchgear and controlgear assemblies General rules |
| EN 62532:2011/A1:2017 | FLUORESCENT INDUCTION LAMPS - SAFETY SPECIFICATIONS |
| EN 60512-20-3 : 2010 | CONNECTORS FOR ELECTRONIC EQUIPMENT - TESTS AND MEASUREMENTS - PART 20-3: FIRE HAZARD TESTS - TEST 20C: FLAMMABILITY, GLOW-WIRE |
| EN 50521:2008/A1:2012 | CONNECTORS FOR PHOTOVOLTAIC SYSTEMS - SAFETY REQUIREMENTS AND TESTS |
| EN 62094-1:2003/A11:2003 | INDICATOR LIGHT UNITS FOR HOUSEHOLD AND SIMILAR FIXED-ELECTRICAL INSTALLATIONS - PART 1: GENERAL REQUIREMENTS |
| EN 60998-2-2:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
| EN 60998-1:2004 | Connecting devices for low-voltage circuits for household and similar purposes - Part 1: General requirements |
| EN 60934:2001/A2:2013 | CIRCUIT BREAKERS FOR EQUIPMENT (CBE) (IEC 60934:2000/A2:2013) |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
| EN 62052-21:2004/A1:2017/AC:2018-04 | ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 21: TARIFF AND LOAD CONTROL EQUIPMENT (IEC 62052-21:2004/A1:2016/COR1:2018) |
| EN 60238 : 2004 AMD 2 2011 | EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011) |
| EN 60252-2 : 2011 AMD 1 2013 | AC MOTOR CAPACITORS - PART 2: MOTOR START CAPACITORS (IEC 60252-2:2010/A1:2013) |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| EN 60439-1:1999/A1:2004 | LOW VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1 - TYPE TESTED AND PARTIALLY TYPE TESTED ASSEMBLIES |
| EN 61549:2003/A3:2012 | MISCELLANEOUS LAMPS (IEC 61549:2003/A3:2012) |
| EN 61810-7:2006 | Electromechanical elementary relays - Part 7: Test and measurement procedures |
| EN 50557:2011 | Requirements for automatic reclosing devices (ARDs) for circuit breakers-RCBOs-RCCBs for household and similar uses |
| EN 62035:2014 | Discharge lamps (excluding fluorescent lamps) - Safety specifications |
| EN 62314 : 2006 | SOLID-STATE RELAYS |
| EN 61095:2009 | Electromechanical contactors for household and similar purposes |
| BS 88-1(2007) : 2007 | LOW-VOLTAGE FUSES - PART 1: GENERAL REQUIREMENTS |
| EN 60584-2:1993 | Thermocouples - Part 2: Tolerances |
| ISO 13943:2017 | Fire safety — Vocabulary |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| EN 60695-2-13:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-13: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE IGNITION TEMPERATURE (GWIT) TEST METHOD FOR MATERIALS (IEC 60695-2-13:2010/A1:2014) |
| ISO/IEC Guide 51:2014 | Safety aspects — Guidelines for their inclusion in standards |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| IEC GUIDE 104:2010 | The preparation of safety publications and the use of basic safety publications and group safety publications |
| EN 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN ISO 13943:2017 | Fire safety - Vocabulary (ISO 13943:2017) |
| ISO 4046-4:2002 | Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products |
| IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| EN 60695-2-12:2010/A1:2014 | FIRE HAZARD TESTING - PART 2-12: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY INDEX (GWFI) TEST METHOD FOR MATERIALS (IEC 60695-2-12:2010/A1:2014) |
| IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| EN 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) (IEC 60695-2-11:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.