• EN 791:1995+A1:2009

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Drill rigs - Safety

    Available format(s): 

    Superseded date:  01-05-2014

    Language(s): 

    Published date:  11-02-2009

    Publisher:  Comite Europeen de Normalisation

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Definitions
    4 List of hazards
    5 Safety requirements and measures
       5.1 General safety requirements
            5.1.1 Intended use of the drill rig
            5.1.2 Ergonomics
            5.1.3 Hot and cold surfaces and sharp edges
            5.1.4 Ventilating ports
            5.1.5 Hoses, pipes and fittings under pressure
            5.1.6 Materials
            5.1.7 Handling of the drill rig and its parts
            5.1.8 Access to operating positions and
                   servicing points
            5.1.9 Isolation of energy sources
       5.2 Driving, tramming and operating position
            5.2.1 General
            5.2.2 Operator's position
            5.2.3 Underground drill rigs
            5.2.4 Visibility
       5.3 Controls, functions, systems
            5.3.1 General
            5.3.2 Starting
            5.3.3 Stopping
            5.3.4 Failure of the power supply
            5.3.5 Failure in a control circuit
       5.4 Control devices
            5.4.1 General
            5.4.2 Emergency stop and safety devices
            5.4.3 Verification
       5.5 Stability
            5.5.1 General stability criteria
            5.5.2 Definitions for stability calculations
            5.5.3 Verification of stability
            5.5.4 Ground pressure, calculation for crawler
                   mounted drill rigs
       5.6 Carrier brakes
            5.6.1 General
            5.6.2 General requirements for wheel mounted
                   drill rigs
            5.6.3 Service braking system for wheel mounted
                   drill rigs
            5.6.4 Secondary braking system for wheel mounted
                   drill rigs
            5.6.5 Parking braking system for wheel and crawler
                   mounted drill rigs
            5.6.6 The service, secondary and parking braking
                   systems on crawler mounted drill rigs
            5.6.7 Braking systems for 'skid steer' wheel mounted
                   drill rigs
            5.6.8 Verification
       5.7 Protection against moving parts
            5.7.1 General
            5.7.2 Transmission parts
            5.7.3 Moving parts involved in the working process
       5.8 Electrical installations
            5.8.1 Electric power installation
            5.8.2 Battery installation
       5.9 Hydraulic installations
       5.10 Pneumatic installations
       5.11 Lighting
            5.11.1 Working light
            5.11.2 Illumination when tramming
       5.12 Fire protection
            5.12.1 General
            5.12.2 Fire extinguishers
            5.12.3 Installation of fire extinguishers
       5.13 Noise and vibration
            5.13.1 General
            5.13.2 Noise
            5.13.3 Vibration
       5.14 Dust and gases
            5.14.1 Dust suppression
            5.14.2 Engines and engine exhausts
       5.15 Draw-works, winches and ropes
            5.15.1 General
            5.15.2 Safety requirements
            5.15.3 Winches for operating a drill rig
                   on slopes
       5.16 Roller and leaf chains
       5.17 Masts, derricks, feed beams and working platforms
            5.17.1 General
            5.17.2 Racking and working platforms
            5.17.3 Personnel lift for operational work
            5.17.4 Movable platforms for service, maintenance
                   and repair
            5.17.5 Access
            5.17.6 Escape systems
       5.18 Special requirements for remotely controlled
            and automated drill rigs
            5.18.1 Operating position
            5.18.2 Emergency stop
            5.18.3 Control system
            5.18.4 Fire protection
       5.19 Warning devices
    6 Verification of safety requirements/measures
    7 Instructions for use - Instruction handbooks
       7.1 Marking - Data plate
       7.2 Indicators
            7.2.1 Information indicators
            7.2.2 Warning signs for residual hazards
       7.3 Maintenance
       7.4 Instruction handbooks for drill rigs
            7.4.1 General
            7.4.2 Operator's instructions
            7.4.3 Special safety instructions in the
                   operator's instructions
            7.4.4 Maintenance instructions
            7.4.5 Special safety instructions in the
                   maintenance instruction
            7.4.6 Spare parts list
    Annex A (normative) - Measurement of noise and vibration
    Annex B (normative) - Instructions for the examination and
                          checking of blocks, wire ropes and chains
    Annex C (normative) - Brake test for drill rigs excluding
                          truck and tractor mounted drill rigs
    Annex D (normative) - Hazards related to operation modes
                          of drill rigs
    Annex E (informative) - Symbols and signs
    Annex F - Bibliography
    Annex ZA (informative) - Relationship between this European
                             Standard and the Essential
                             Requirements of EU Directive
                             98/37/EC, amended by 98/79/EC
    Annex ZB (informative) - Relationship between this European
                             Standard and the Essential
                             Requirements of EU Directive
                             2006/42/EC

    Abstract - (Show below) - (Hide below)

    1.1The general term "Drill Rig" covers several differing types of machines for use in the construction industry, water well drilling industry, mining and quarrying, for use above ground as well as underground and for tunnel construction. The differing tasks determine the choice of drilling method and type of machine. For this reason there are many possible ways to separate drill rigs into different groups, e.g. in accordance with:-The task; -The drilling method used;-The cutting removal method;-The type of construction work.The methods used for drilling can be basically differentiated in percussive and rotary drilling principles.Percussive drilling is a method by which the hole is produced by crushing the ground or rock at the bottom of the drill-hole by striking it with the drilling tool and removing the cuttings out of the bore-hole.Rotary drilling is a method in which the drilling tool at the bottom of the borehole is rotated and at the same time, a feed force is applied by a feed system or drill collar. The ground or rock at the bottom of the borehole is crushed or cut by pressure, shear or tensile stress produced by the different drilling tools. The cuttings are periodically or continuously removed out of the bore hole.Rotary percussive drilling is performed by a piston striking directly on the bit (down the hole hammer drills) or by percussive energy transmitted via a drill string to the bit. The piston is powered by either hydraulic fluid or compressed air.At the same time the drill bit is rotated either continuously or intermittently.The cuttings are continuously removed out of the borehole by a flushing medium, air or fluid which is carried to the drilling tool.Typical examples of drill rigs covered by this standard are:-Cable tool drill rig;-Pile drill rigs;-Pile top drill rig;-Raise borer;-Reverse circulation drill rig;-Rotary and percussive drill rig for underground drilling;-Rotary and percussive drill rig

    General Product Information - (Show below) - (Hide below)

    Committee CEN/TC 151
    Development Note 1995 Edition Re-Issued in February 2009 & incorporates AMD 1 2009. (03/2009)
    Document Type Standard
    Publisher Comite Europeen de Normalisation
    Status Superseded
    Superseded By

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30192726 DC : 0 BS EN 1538 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
    07/30172830 DC : DRAFT DEC 2007 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED - EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    BS ISO 18400-102:2017 Soil quality. Sampling Selection and application of sampling techniques
    BS ISO 20474-1:2017 Earth-moving machinery. Safety General requirements
    PREN 14199 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
    12/30244746 DC : 0 BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    PD ISO/TR 12603:2010 Building construction machinery and equipment. Classification
    PREN 1536 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
    13/30280743 DC : 0 BS EN 14199 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - MICROPILES
    DIN EN 15954-1:2014-06 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    16/30277591 DC : 0 BS ISO 20474-12 - EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    BS EN ISO 22476-5:2012 Geotechnical investigation and testing. Field testing Flexible dilatometer test
    09/30202535 DC : DRAFT JUN 2009 BS EN 15955-1 - RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    10/30185766 DC : 0 BS EN 1889-1 - MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    BS EN 15746-1 : 2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    I.S. EN ISO 22282-1:2012 GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES (ISO 22282-1:2012)
    ISO 18400-102:2017 Soil quality — Sampling — Part 102: Selection and application of sampling techniques
    15/30279805 DC : 0 BS EN 15746-1 - RAILWAY APPLICATIONS - TRACK - ROAD RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
    DIN EN ISO 22475-1:2007-01 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006); German version EN ISO 22475-1:2006
    BS EN 14731:2005 Execution of special geotechnical works. Ground treatment by deep vibration
    UNE-EN 15954-1:2014 Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working
    I.S. EN ISO 22475-1:2006 GEOTECHNICAL INVESTIGATION AND TESTING - SAMPLING METHODS AND GROUNDWATER MEASUREMENTS - PART 1: TECHNICAL PRINCIPLES FOR EXECUTION
    BS DD237(1996) : 1996 BUILDING CONSTRUCTION MACHINERY AND EQUIPMENT - CLASSIFICATION
    17/30341100 DC : 0 BS ISO 18758-2 - MINING AND EARTH-MOVING MACHINERY - ROCK DRILL RIGS AND ROCK REINFORCEMENT RIGS - PART 2: SAFETY REQUIREMENTS
    10/30233949 DC : 0 BS EN 12111 - TUNNELLING MACHINES - ROAD HEADERS, CONTINUOUS MINERS AND IMPACT RIPPERS - SAFETY REQUIREMENTS
    14/30258500 DC : 0 BS EN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR TRAVELLING AND WORKING
    UNE-EN ISO 22476-5:2014 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    PREN 1889-1 : DRAFT 2010 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    08/30177213 DC : DRAFT JUNE 2008 BS EN 13524 AMD1 - HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
    14/30272921 DC : 0 BS ISO 18400-102 - SOIL QUALITY - SAMPLING - PART 102: SELECTION AND APPLICATION OF SAMPLING TECHNIQUES
    BS EN ISO 22282-1:2012 Geotechnical investigation and testing. Geohydraulic testing General rules
    08/30123706 DC : DRAFT APR 2008 ISO 22282-1 - GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES
    09/30202529 DC : 0 BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    I.S. EN ISO 22476-5:2012 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST (ISO 22476-5:2012)
    ISO 20474-12:2017 Earth-moving machinery — Safety — Part 12: Requirements for cable excavators
    DIN EN 1538:2015-10 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
    DIN EN 15237 E : 2007 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - VERTICAL DRAINAGE
    DIN EN 14679:2005-07 Execution of special geotechnical works - Deep mixing
    BS EN 13524 : 2003 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
    BS EN 1538 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DIAPHRAGM WALLS
    I.S. EN 13524:2003 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
    DIN EN 13524:2003-10 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
    EN 13524:2003+A2:2014 Highway maintenance machines - Safety requirements
    DIN EN 1536:2015-10 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
    EN 15746-1:2010+A1:2011 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working
    I.S. EN 12348:2000 CORE DRILLING MACHINES ON STAND - SAFETY
    I.S. EN 474-12:2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    I.S. EN 1889-1:2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    UNI EN 15746-1 : 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    I.S. EN 1536:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
    I.S. EN 1538:2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
    BS ISO 20474-12:2017 Earth-moving machinery. Safety Requirements for cable excavators
    08/30192723 DC : 0 BS EN 1536 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
    07/30163503 DC : 0 BS ISO 20474-12 - EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR ROPE EXCAVATORS
    NF EN 15746-1 : 2010 + A1 2011 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    12/30244740 DC : 0 BS EN 15954-1 - RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    04/30113757 DC : DRAFT MAY 2004 EN ISO 22475-1 - GEOTECHNICAL INVESTIGATION AND TESTING - SAMPLING BY DRILLING AND EXCAVATION METHODS AND GROUNDWATER MEASUREMENTS - PART 1: TECHNICAL PRINCIPLES FOR EXECUTION
    UNE-EN ISO 22282-1:2013 Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
    14/30292494 DC : 0 BS EN ISO 22476-15 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 15: MEASURING WHILE DRILLING
    ISO 18758-2:2018 Mining and earth-moving machinery — Rock drill rigs and rock reinforcement rigs — Part 2: Safety requirements
    I.S. EN 15955-1:2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    PREN 12699 : DRAFT 2013 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
    ISO/TR 12603:2010 Building construction machinery and equipment Classification
    UNI EN ISO 22476-5 : 2013 GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 5: FLEXIBLE DILATOMETER TEST
    DIN EN 12348:2010-01 Core drilling machines on stand - Safety (includes Amendment A1:2009)
    DIN EN 14731 E : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUND TREATMENT BY DEEP VIBRATION
    BS EN 15237:2007 Execution of special geotechnical works. Vertical drainage
    UNE-EN 1889-1:2012 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    DIN EN 1889-1:2011-10 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    UNI EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    UNI EN 1889-1 : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    UNI EN 474-12 : 2009 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    UNI EN 14679 : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
    UNI EN 996 : 2009 PILING EQUIPMENT - SAFETY REQUIREMENTS
    UNI EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    UNI EN 12348 : 2009 CORE DRILLING MACHINES ON STAND - SAFETY
    DIN EN 15746-1:2016-02 (Draft) Railway applications - Track - Road rail machines and associated equipment - Part 1: Technical requirements for travelling and working; German and English version prEN 15746-1:2015
    16/30277014 DC : DRAFT MAR 2016 BS ISO 20474-1 - EARTH-MOVING MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS
    UNI EN ISO 22282-1 : 2012 GEOTECHNICAL INVESTIGATION AND TESTING - GEOHYDRAULIC TESTING - PART 1: GENERAL RULES
    I.S. EN 15746-1:2010 RAILWAY APPLICATIONS - TRACK - ROAD-RAIL MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    DIN EN 14679 E : 2005 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
    DIN EN 474-12:2010-05 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators (includes Amendment A1:2008)
    ISO 22282-1:2012 Geotechnical investigation and testing — Geohydraulic testing — Part 1: General rules
    BS EN 996 : 1996 PILING EQUIPMENT - SAFETY REQUIREMENTS
    BS EN 12348 : 2000 CORE DRILLING MACHINES ON A STAND - SAFETY
    BS EN 14679:2005 Execution of special geotechnical works. Deep mixing
    BS EN 1536 : 2010 EXECUTION OF SPECIAL GEOTECHNICAL WORK - BORED PILES
    BS EN 474-12 : 2006 EARTH-MOVING MACHINERY - SAFETY - PART 12: REQUIREMENTS FOR CABLE EXCAVATORS
    ISO 22476-5:2012 Geotechnical investigation and testing — Field testing — Part 5: Flexible dilatometer test
    DIN EN 15237:2007-06 Execution of special geotechnical works - Vertical drainage
    UNE-EN 15955-1:2014 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
    UNE-EN ISO 22475-1:2010 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006)
    ISO 22475-1:2006 Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution
    EN 14679:2005/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - DEEP MIXING
    EN 1538:2010+A1:2015 Execution of special geotechnical work - Diaphragm walls
    EN 1536:2010+A1:2015 Execution of special geotechnical work - Bored piles
    EN 14731:2005 Execution of special geotechnical works - Ground treatment by deep vibration
    EN 15954-1 : 2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    EN ISO 22282-1:2012 Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
    UNI EN 13524 : 2014 HIGHWAY MAINTENANCE MACHINES - SAFETY REQUIREMENTS
    EN 996:1995+A3:2009 Piling equipment - Safety requirements
    EN ISO 22476-5:2012 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    EN 15237:2007 Execution of special geotechnical works - Vertical drainage
    EN 1889-1:2011 Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles
    EN 15955-1 : 2013 RAILWAY APPLICATIONS - TRACK - DEMOUNTABLE MACHINES AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    EN 474-12:2006+A1:2008 Earth-moving machinery - Safety - Part 12: Requirements for cable excavators
    03/308533 DC : DRAFT JUNE 2003 EN 14731 - EXECUTION OF SPECIAL GEOTECHNICAL WORKS - GROUP TREATMENT BY DEEP VIBRATION
    DIN EN 15955-1:2013-08 Railway applications - Track - Demountable machines and associated equipment - Part 1: Technical requirements for running and working
    BS EN 15954-1:2013 Railway applications. Track. Trailers and associated equipment Technical requirements for running and working
    DIN EN ISO 22476-5:2013-03 Geotechnical investigation and testing - Field testing - Part 5: Flexible dilatometer test (ISO 22476-5:2012)
    PREN 1538 : DRAFT 2008 EXECUTION OF SPECIAL GEOTECHNICAL WORK - DIAPHRAGM WALLS
    BS EN 15955-1:2013 Railway applications. Track. Demountable machines and associated equipment Technical requirements for running and working
    13/30280740 DC : 0 BS EN 12699 - EXECUTION OF SPECIAL GEOTECHNICAL WORK - DISPLACEMENT PILES
    05/19988433 DC : 0 PREN 14033-2 - RAILWAY APPLICATIONS - TRACK - RAILBOUND CONSTRUCTION AND MAINTENANCE MACHINES - PART 2: TECHNICAL REQUIREMENTS FOR WORKING
    DIN EN ISO 22282-1:2012-09 Geotechnical investigation and testing - Geohydraulic testing - Part 1: General rules (ISO 22282-1:2012)
    I.S. EN 15954-1:2013 RAILWAY APPLICATIONS - TRACK - TRAILERS AND ASSOCIATED EQUIPMENT - PART 1: TECHNICAL REQUIREMENTS FOR RUNNING AND WORKING
    DIN EN 13524:2014-07 Highway maintenance machines - Safety requirements (includes Amendment A2:2014)
    DIN EN 1889-1 E : 2011 MACHINES FOR UNDERGROUND MINES - MOBILE MACHINES WORKING UNDERGROUND - SAFETY - PART 1: RUBBER TYRED VEHICLES
    BS EN 1889-1:2011 Machines for underground mines. Mobile machines working underground. Safety Rubber tyred vehicles
    BS EN ISO 22475-1:2006 Geotechnical investigation and testing. Sampling methods and groundwater measurements Technical principles for execution
    DIN EN 15746-1:2011-12 Railway applications - Track - Road-rail machines and associated equipment - Part 1: Technical requirements for running and working (includes Amendment A1:2011)
    EN ISO 22475-1:2006 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006)
    DIN EN 14731:2005-12 Execution of special geotechnical works - Ground treatment by deep vibration
    EN 12348:2000+A1:2009 Core drilling machines on stand - Safety
    DIN EN 996:2010-02 PILING EQUIPMENT - SAFETY REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
    EN 294:1992/AC:1993 SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS
    EN 418 : 1992 SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN
    ISO 4302:2016 Cranes Wind load assessment
    ISO 10570:2004 Earth-moving machinery — Articulated frame lock — Performance requirements
    ISO 4872:1978 Acoustics Measurement of airborne noise emitted by construction equipment intended for outdoor use Method for determining compliance with noise limits
    ISO 7095:1982 Earth-moving machinery Crawler tractors and crawler loaders Operator's controls
    ISO 4253:1993 Agricultural tractors — Operator's seating accommodation — Dimensions
    ISO 6405-2:2017 Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories
    EN 22860 : 1985 EARTH-MOVING MACHINERY - MINIMUM ACCESS DIMENSIONS INCORPORATING AN AGREED COMMON MODIFICATION
    EN 23164 : 1985 EARTH-MOVING MACHINERY - LABORATORY EVALUATIONS OF ROLL-OVER & FALLING-OBJECT PROTECTIVE STRUCTURES - SPECIFICATION FOR THE DEFLECTION-LIMITING VOLUME
    ISO 5010:2007 Earth-moving machinery Rubber-tyred machines Steering requirements
    EN 292-1 : 1991 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY
    ISO 3795:1989 Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
    EN 50081-2:1993 Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment
    ISO 4309:2010 Cranes Wire ropes Care and maintenance, inspection and discard
    ISO 3471-1:1986 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements — Part 1: Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers
    ISO 6405-1:2017 Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols
    ISO 3457:2003 Earth-moving machinery Guards Definitions and requirements
    EN 23411 : 1988 EARTH-MOVING MACHINERY - HUMAN PHYSICAL DIMENSIONS OF OPERATORS & MINIMUM OPERATOR SPACE ENVELOPE
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    ENV 1070 : 1993 SAFETY OF MACHINERY - TERMINOLOGY
    EN 50082-2 : 95 AC 95 ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT
    EN 292-2 : 91 AMD 1 95 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION
    ISO 7000:2014 Graphical symbols for use on equipment Registered symbols
    1998/37/EC : 1998 DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY
    ISO 3864:1984 Safety colours and safety signs
    ISO 2867:2011 Earth-moving machinery Access systems
    EN 61310-1:2008 Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals
    ISO 3450:2011 Earth-moving machinery — Wheeled or high-speed rubber-tracked machines — Performance requirements and test procedures for brake systems
    IEC 60651:1979+AMD1:1993+AMD2:2000 CSV Sound level meters
    IEC 60804:2000 Integrating-averaging sound level meters
    ISO 6750:2005 Earth-moving machinery Operator's manual Content and format
    EN 60204-1 : 2006 COR 2010 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective