EN 805:2000
Current
Current
The latest, up-to-date edition.
Water supply - Requirements for systems and components outside buildings
Published date
19-01-2000
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
3.1 Pressures
3.2 System
3.3 Components
3.4 Diameters
3.5 Installation
3.6 Hydraulic design
3.7 Structural design
4 Application of standards and regulations
5 Requirements for water supply systems
5.1 Water quality
5.2 Design life
5.3 Demand for water
5.4 System security
6 Service objectives
7 Rehabilitation
8 Design
8.1 Design objectives
8.2 Peak flow factors
8.3 Hydraulic design
8.4 Structural design
8.5 System layout
8.6 Protection against aggressive environment
8.7 Reservoirs
8.8 Pumping stations
8.9 Documentation
9 General requirements for product standards
9.1 General
9.2 Materials
9.3 Dimensions
9.4 Structural design
9.5 Mechanical requirements
9.6 Water tightness
9.7 Joints
9.8 Protective measures
9.9 Durability
9.10 Test methods
9.11 Interconnection of products
9.12 Quality control
9.13 Marking
10 Installation
10.1 General requirements
10.2 Pipe trenches
10.3 Installation of pipeline components
10.4 Pipe joints
10.5 Protection against corrosion and contamination
10.6 Embedment and main backfill
10.7 Records of tests during installation
11 Testing of pipelines
11.1 General requirements
11.2 Safety
11.3 Pressure test
12 Disinfection
12.1 General
12.2 Preparation for disinfection
12.3 Selection of disinfectant
12.4 Disinfection procedures
12.5 Microbiological clearance and reporting
13 Additional requirements
14 Operation
14.1 Inspection and monitoring
14.2 Maintenance
15 Updating of documentation
Annex A (informative) Guidance to EN 805
Annex B (informative) A-deviations
Annex C (informative) Bibliography
This standard comprises: - general requirements for water supply systems outside buildings including potable water mains and service pipes, service reservoirs, other facilities and raw water mains but excluding treatment works and water resources development; - general requirements for components; - general requirements for inclusion in product standards which may include specifications which are more stringent; - requirements for installation, site testing and commissioning.
| Committee |
CEN/TC 164
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN 805:2000-03 | Identical |
| NF EN 805 : 2000 | Identical |
| NBN EN 1671 : 1997 | Identical |
| SN EN 805 : 2000 | Identical |
| UNE-EN 805:2000 | Identical |
| NS EN 805 : 1ED 2000 | Identical |
| I.S. EN 805:2000 | Identical |
| NEN EN 805 : 2000 | Identical |
| NBN EN 805 : 2000 | Identical |
| BS EN 805:2000 | Identical |
| UNI EN 805 : 2002 | Identical |
| PN EN 805 : 2002 | Identical |
| 13/30272812 DC : 0 | BS ISO 9635-5 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 5: CONTROL VALVES |
| 13/30282119 DC : 0 | BS ISO 9635-3 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 3: CHECK VALVES |
| 01/709787 DC : DRAFT JUN 2001 | PREN ISO 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| BS ISO 9635-5:2014 | Agricultural irrigation equipment. Irrigation valves Control valves |
| DIN EN 806-4:2010-06 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| BS ISO 9635-4:2014 | Agricultural irrigation equipment. Irrigation valves Air valves |
| 01/709786 DC : DRAFT JUN 2001 | PREN ISO 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| PREN 15885 : DRAFT 2015 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
| ISO/TR 4191:2014 | Plastics piping systems for water supply Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O) Guidance for installation |
| S.R. CEN/TS 15223:2017 | PLASTICS PIPING SYSTEMS - VALIDATED DESIGN PARAMETERS OF BURIED THERMOPLASTICS PIPING SYSTEMS |
| ISO 9635-5:2014 | Agricultural irrigation equipment Irrigation valves Part 5: Control valves |
| UNI CEN/TS 14807 : 2014 | PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE STRUCTURAL ANALYSIS OF BURIED GRP-UP PIPELINES |
| I.S. EN ISO 16136:2006 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| I.S. EN ISO 21787:2006 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16138:2006 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16139:2006 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16135:2006 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| I.S. EN ISO 16137:2006 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| EN 476:2011 | General requirements for components used in drains and sewers |
| BS EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| BS EN 806-1:2000 | Specifications for installations inside buildings conveying water for human consumption General |
| BS EN 1074-4:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Air valves |
| BS EN 14901:2006 | Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods |
| BS EN 14267:2004 | Irrigation techniques. Irrigation hydrants |
| BS EN ISO 16135:2006 | Industrial valves. Ball valves of thermoplastic materials |
| UNE-CEN/TR 1295-3:2011 IN | Structural design of buried pipelines under various conditions of loading - Part 3: Common method |
| BS EN ISO 16139:2006 | Industrial valves. Gate valves of thermoplastic materials |
| I.S. EN 14901:2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| EN 1074-3:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 3: Check valves |
| CEN/TS 14578:2013 | Plastics piping systems for water supply or drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Recommended practice for installation |
| EN 1074-4:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 4: Air valves |
| EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| CEN/TR 1295-3:2007 | Structural design of buried pipelines under various conditions of loading - Part 3: Common method |
| DIN EN 15885:2011-03 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| EN 16932-2:2018 | Drain and sewer systems outside buildings - Pumping systems - Part 2: Positive pressure systems |
| EN 1074-5:2001 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 5: Control valves |
| CEN/TS 14807:2013 | Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the structural analysis of buried GRP-UP pipelines |
| 03/117538 DC : DRAFT NOV 2003 | EN 14801 - CONDITIONS FOR PRESSURE CLASSIFICATION OF PRODUCTS FOR WATER AND WASTE WATER PIPELINES |
| ISO 9635-4:2014 | Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves |
| I.S. EN 13689:2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| 13/30295203 DC : 0 | BS EN 1610 - CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| BS EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC U) General |
| 10/30216654 DC : 0 | BS EN 12842 - DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| 14/30294800 DC : 0 | BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| 08/30178877 DC : DRAFT MAY 2008 | BS EN 476 - GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| 01/122757 DC : DRAFT JULY 2001 | ISO/DIS 16138 - INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTIC MATERIALS |
| PD CEN/TR 1295-4:2015 | Structural design of buried pipelines under various conditions of loading Parameters for reliability of the design |
| 04/30121907 DC : DRAFT SEP 2004 | PREN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING OF DUCTILE IRON FITTINGS AND ACCESSORIES (HEAVY DUTY) - REQUIREMENTS AND TEST METHODS |
| DIN EN 15885:2016-01 (Draft) | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| I.S. EN 16932-2:2018 | DRAIN AND SEWER SYSTEMS OUTSIDE BUILDINGS - PUMPING SYSTEMS - PART 2: GENERAL REQUIREMENTS |
| S.R. CEN/TS 14578:2013 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY OR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - RECOMMENDED PRACTICE FOR INSTALLATION |
| DIN EN 12842:2012-11 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| DIN EN 476:2011-04 | General requirements for components used in drains and sewers |
| DIN EN 14268:2005-11 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| DIN EN 14267:2004-10 | Irrigation techniques - Irrigation hydrants |
| ISO 16136:2006 | Industrial valves Butterfly valves of thermoplastics materials |
| BS EN 476:2011 | General requirements for components used in drains and sewers |
| UNE-EN 545:2011 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| DIN EN 14901:2014-12 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 12842:2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| DIN EN 13689:2003-01 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| DIN EN 14409-1:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| I.S. EN 1074-6:2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| I.S. EN 1610:2015 | CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| I.S. EN 545:2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| I.S. EN 476:2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| S.R. CEN TR 1295-3:2007 | STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 3: COMMON METHOD |
| NF EN 476 : 2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| 05/30138214 DC : DRAFT AUG 2005 | ISO 9635-3 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 3: CHECK VALVES |
| 08/30190305 DC : DRAFT DEC 2008 | BS EN 15885 - CLASSIFICATION AND PERFORMANCE CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| PREN 12842 : DRAFT 2010 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| 02/121563 DC : DRAFT APR 2002 | BS EN 14409-1 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| BS ISO 9635-3:2014 | Agricultural irrigation equipment. Irrigation valves Check valves |
| 05/30138208 DC : DRAFT AUG 2005 | ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| 08/30181473 DC : DRAFT JULY 2008 | BS EN 545 - DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| 02/710115 DC : DRAFT AUG 2002 | PREN 14525 - DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| 08/30185535 DC : DRAFT JULY 2008 | BS EN ISO 1452-1 - PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC U) - PART 1: GENERAL |
| EN 15885:2010 | Classification and characteristics of techniques for renovation and repair of drains and sewers |
| UNI EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| CEN/TR 1046:2013 | Thermoplastics piping and ducting systems - Systems outside building structures for the conveyance of water or sewage - Practices for underground installation |
| BS EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption Installation |
| 01/713262 DC : DRAFT SEP 2001 | PREN 14268 - IRRIGATION TECHNIQUES - METRES FOR IRRIGATION WATER |
| 01/122755 DC : DRAFT JULY 2001 | ISO/DIS 21787 - INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTIC MATERIALS |
| 01/709785 DC : DRAFT JUN 2001 | PREN ISO 16136 - INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTIC MATERIALS |
| ISO 9635-3:2014 | Agricultural irrigation equipment Irrigation valves Part 3: Check valves |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| BS EN 16932-2:2018 | Drain and sewer systems outside buildings. Pumping systems Positive pressure systems |
| BS EN 15885:2010 | Classification and characteristics of techniques for renovation and repair of drains and sewers |
| ISO 9635-1:2014 | Agricultural irrigation equipment Irrigation valves Part 1: General requirements |
| 16/30332542 DC : 0 | BS EN 15885 - CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION, REPAIR AND REPLACEMENT OF DRAINS AND SEWERS |
| NF EN 806-4 : 2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| UNI EN 806-1 : 2008 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 1: GENERAL |
| ISO 24512:2007 | Activities relating to drinking water and wastewater services — Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| DIN EN 1074-6:2009-03 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| DIN EN ISO 16135:2006-06 | INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS |
| BS EN 1074-1:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests General requirements |
| BS EN 1074-3:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Check valves |
| BS EN 13689:2002 | Guidance on the classification and design of plastics piping systems used for renovation |
| BS EN 545:2010 | Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods |
| BS EN ISO 16138:2006 | Industrial valves. Diaphragm valves of thermoplastics materials |
| UNE-EN 12842:2013 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| UNE-EN 1610:2016 | Construction and testing of drains and sewers |
| ISO 16135:2006 | Industrial valves Ball valves of thermoplastics materials |
| UNI EN 14268 : 2006 | IRRIGATION TECHNIQUES - METERS FOR IRRIGATION WATER |
| EN ISO 21787:2006 | Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) |
| UNI EN 14525 : 2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| UNI EN 12842 : 2012 | DUCTILE IRON FITTINGS FOR PVC-U OR PE PIPING SYSTEMS - REQUIREMENTS AND TEST METHODS |
| UNI EN 1993-4-3 : 2007 | EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 4-3: PIPELINES |
| UNI EN 476 : 2011 | GENERAL REQUIREMENTS FOR COMPONENTS USED IN DRAINS AND SEWERS |
| I.S. EN 14525:2005 | DUCTILE IRON WIDE TOLERANCE COUPLINGS AND FLANGE ADAPTORS FOR USE WITH PIPES OF DIFFERENT MATERIALS: DUCTILE IRON, GREY IRON, STEEL, PVC-U PE, FIBRE-CEMENT |
| UNI EN 14901 : 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNI EN 545 : 2010 | DUCTILE IRON PIPES, FITTINGS, ACCESSORIES AND THEIR JOINTS FOR WATER PIPELINES - REQUIREMENTS AND TEST METHODS |
| UNI EN 1074-6 : 2009 | VALVES FOR WATER SUPPLY - FITNESS FOR PURPOSE REQUIREMENTS AND APPROPRIATE VERIFICATION TESTS - PART 6: HYDRANTS |
| CSA Z24512 : 2010 : R2014 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| CSA Z24512 : 2010 | ACTIVITIES RELATING TO DRINKING WATER AND WASTEWATER SERVICES - GUIDELINES FOR THE MANAGEMENT OF DRINKING WATER UTILITIES AND FOR THE ASSESSMENT OF DRINKING WATER SERVICES |
| PD CEN/TS 14578:2013 | Plastics piping systems for water supply or drainage and sewerage. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Recommended practice for installation |
| ISO 9635-2:2014 | Agricultural irrigation equipment Irrigation valves Part 2: Isolating valves |
| 15/30317327 DC : 0 | BS EN 16941-1 - ON-SITE NON-POTABLE WATER SYSTEMS - PART 1: SYSTEMS FOR THE USE OF RAINWATER |
| PD CEN/TR 15128:2005 | Survey of European standards for rehabilitation of drain and sewer systems |
| PD ISO/TR 4191:2014 | Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation |
| 13/30271604 DC : 0 | BS ISO 9635-2 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 2: ISOLATING VALVES |
| UNI EN ISO 1452-1 : 2010 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| PREN 1610 : DRAFT 2013 | CONSTRUCTION AND TESTING OF DRAINS AND SEWERS |
| 05/30138220 DC : DRAFT AUG 2005 | ISO 9635-5 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 5: CONTROL VALVES |
| S.R. CEN/TR 1046:2013 | THERMOPLASTICS PIPING AND DUCTING SYSTEMS - SYSTEMS OUTSIDE BUILDING STRUCTURES FOR THE CONVEYANCE OF WATER OR SEWAGE - PRACTICES FOR UNDERGROUND INSTALLATION |
| CEN/TS 15223:2017 | Plastics piping systems - Validated design parameters of buried thermoplastics piping systems |
| PREN 14901 : DRAFT 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 1452-1:2009 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY AND FOR BURIED AND ABOVE-GROUND DRAINAGE AND SEWERAGE UNDER PRESSURE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) - PART 1: GENERAL |
| I.S. EN 806-4:2010 | SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION |
| DIN EN ISO 16138:2006-06 | INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16136:2006-06 | INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16137:2006-06 | INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS |
| DIN EN ISO 16139:2006-06 | INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS |
| ISO 21787:2006 | Industrial valves Globe valves of thermoplastics materials |
| BS EN 14268:2005 | Irrigation techniques. Meters for irrigation water |
| BS EN ISO 16137:2006 | Industrial valves. Check valves of thermoplastic materials |
| BS EN 1074-5:2001 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Control valves |
| UNE-EN 14901:2015 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| BS EN ISO 21787:2006 | Industrial valves. Globe valves of thermoplastics materials |
| UNE-EN 1074-6:2011 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| BS EN 10311:2005 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids |
| BS EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks General |
| ISO 16137:2006 | Industrial valves Check valves of thermoplastics materials |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| BS EN 1610:2015 | Construction and testing of drains and sewers |
| BS EN ISO 16136:2006 | Industrial valves. Butterfly valves of thermoplastic materials |
| ISO 16139:2006 | Industrial valves Gate valves of thermoplastics materials |
| BS EN 14801:2006 | Conditions for pressure classification of products for water and wastewater pipelines |
| BS EN 1074-2:2000 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Isolating valves |
| BS EN 1444:2001 | Fibre-cement pipelines. Guide for laying and on-site work practices |
| BS EN 1074-6:2008 | Valves for water supply. Fitness for purpose requirements and appropriate verification tests Hydrants |
| DIN EN ISO 21787:2006-06 | INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS |
| EN ISO 16139:2006 | Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) |
| EN 14409-1:2004 | Plastics piping systems for renovation of underground water supply networks - Part 1: General |
| EN ISO 16135:2006 | Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) |
| EN ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN 14801:2006 | Conditions for pressure classification of products for water and wastewater pipelines |
| EN ISO 16136:2006 | Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006) |
| EN 1610:2015 | Construction and testing of drains and sewers |
| EN 14525:2004 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U PE, Fibre-cement |
| EN 806-4:2010 | Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation |
| EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods |
| EN 13689 : 2002 | GUIDANCE ON THE CLASSIFICATION AND DESIGN OF PLASTICS PIPING SYSTEMS USED FOR RENOVATION |
| EN 1444:2000 | Fibre-cement pipelines - Guide for laying and on-site work practices |
| EN ISO 16138:2006 | Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006) |
| EN 14901:2014 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| EN ISO 16137:2006 | Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) |
| 01/122758 DC : DRAFT JULY 2001 | ISO/DIS 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 14409-1:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 1: GENERAL |
| BS ISO 24512:2007 | Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services |
| 13/30271601 DC : 0 | BS ISO 9635-1 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 1: GENERAL REQUIREMENTS |
| 13/30282124 DC : 0 | BS ISO 9635-4 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 4: AIR VALVES |
| UNE-EN 15885:2011 | Classification and performance characteristics of techniques for renovation and repair of drains and sewers |
| 01/709784 DC : DRAFT JUN 2001 | PREN ISO 16135 - INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTIC MATERIALS |
| I.S. EN 15885:2010 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| 01/122754 DC : DRAFT JULY 2001 | ISO/DIS 16137 - INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTIC MATERIALS |
| BS ISO 9635-1:2014 | Agricultural irrigation equipment. Irrigation valves General requirements |
| BS ISO 9635-2:2014 | Agricultural irrigation equipment. Irrigation valves Isolating valves |
| PD CEN/TS 14807:2013 | Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the structural analysis of buried GRP-UP pipelines |
| 05/30138211 DC : DRAFT AUG 2005 | ISO 9635-2 - AGRICULTURAL IRRIGATION EQUIPMENT - IRRIGATION VALVES - PART 2: ISOLATING VALVES |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| CEN/TR 1295-4:2015 | Structural design of buried pipelines under various conditions of loading - Part 4: Parameters for reliability of the design |
| S.R. CEN/TR 1295-4:2015 | STRUCTURAL DESIGN OF BURIED PIPELINES UNDER VARIOUS CONDITIONS OF LOADING - PART 4: PARAMETERS FOR RELIABILITY OF THE DESIGN |
| S.R. CEN/TS 14807:2013 | PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE STRUCTURAL ANALYSIS OF BURIED GRP-UP PIPELINES |
| UNI CEN/TS 14578 : 2014 | PLASTICS PIPING SYSTEMS FOR WATER SUPPLY OR DRAINAGE AND SEWERAGE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - RECOMMENDED PRACTICE FOR INSTALLATION |
| UNI EN 15885 : 2011 | CLASSIFICATION AND CHARACTERISTICS OF TECHNIQUES FOR RENOVATION AND REPAIR OF DRAINS AND SEWERS |
| I.S. CEN TR 15128:2005 | SURVEY OF EUROPEAN STANDARDS FOR REHABILITATION OF DRAIN AND SEWER SYSTEMS |
| ISO 1452-1:2009 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General |
| I.S. CEN TS 14807:2004 | PLASTICS PIPING SYSTEMS - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE STRUCTURAL ANALYSIS OF BURIED GRP-UP PIPELINES |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| UNE-EN 476:2011 | General requirements for components used in drains and sewers |
| BS EN 12842:2012 | Ductile iron fittings for PVC-U or PE piping systems. Requirements and test methods |
| ISO 16138:2006 | Industrial valves Diaphragm valves of thermoplastics materials |
| EN 1074-6:2008 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 6: Hydrants |
| DIN EN 1074-2:2004-07 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 2: Isolating valves |
| CEN/TR 15128:2005 | Survey of European Standards for rehabilitation of drain and sewer systems |
| DIN EN 10311:2005-08 | Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids; German version EN 10311:2005 |
| DIN EN 14525:2005-02 | Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: Ductile iron, grey iron, steel, PVC-U, PE, fibre-cement |
| EN 1074-1:2000 | Valves for water supply - Fitness for purpose requirements and appropriate verification tests - Part 1: General requirements |
| DIN EN 14801:2006-09 | CONDITIONS FOR PRESSURE CLASSIFICATION OF PRODUCTS FOR WATER AND WASTEWATER PIPELINES |
| DIN EN 545:2011-09 | Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods |
| EN 1295-1:1997 | Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
| EN 1508:1998 | Water supply - Requirements for systems and components for the storage of water |
| EN 45011:1998 | General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996) |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| EN 45011 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
| EN 45012 : 1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.