EN ISO 18265:2013
Current
The latest, up-to-date edition.
Metallic materials - Conversion of hardness values (ISO 18265:2013)
02-10-2013
Foreword
Introduction
1 Scope
2 Principles of conversion
3 Application of conversion tables
Annex A (informative) - Conversion table for unalloyed, low
alloy steels and cast steel
Annex B (informative) - Conversion tables for steels for
quenching and tempering
Annex C (informative) - Conversion tables for steels for
cold working
Annex D (informative) - Conversion tables for high speed steels
Annex E (informative) - Conversion tables for hardmetals
Annex F (informative) - Conversion tables for non-ferrous
metals and alloys
Annex G (informative) - Conversion tables for tool steels
Annex H (informative) - Remarks on the effect of the changed
test conditions
Bibliography
ISO 18265:2013 specifies the principles of the conversion of hardness values to equivalent values in other hardness scales and to estimates of tensile strength. It gives general information on the use of the conversion tables.The conversion tables in Annexes A to G apply to unalloyed and low alloy steels and cast steel, steels for quenching and tempering, steels for cold working, high speed steels, tool steels, hardmetals, and non-ferrous metals and alloys.Annex H gives information about the effects of changes of the test procedure in the standards specifying the hardness tests.Converted values obtained using ISO 18265:2013 are only directly applicable to the exact material tested. For all other materials, they provide an indicator only. In all cases, the converted values are not intended as replacements for values obtained by the correct standard method. In particular, tensile strength estimates are the least reliable converted values in ISO 18265:2013.
| Committee |
CEN/TC 459/SC 1
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| DIN EN ISO 18265:2014-02 | Identical |
| NBN EN ISO 18265 : 2013 | Identical |
| NEN EN ISO 18265 : 2013 | Identical |
| SN EN ISO 18265:2013 | Identical |
| BS EN ISO 18265:2013 | Identical |
| I.S. EN ISO 18265:2013 | Identical |
| UNE-EN ISO 18265:2014 | Identical |
| NF EN ISO 18265 : 2013 | Identical |
| UNI EN ISO 18265 : 2005 | Identical |
| SS-EN ISO 18265 : 2013 | Identical |
| NS EN ISO 18265 : 2013 | Identical |
| UNI EN ISO 18265 : 2014 | Identical |
| PN EN ISO 18265 : 2014 | Identical |
| ISO 18265:2013 | Identical |
| 09/30185939 DC : 0 | BS EN 12513 - FOUNDING - ABRASION RESISTANT CAST IRONS |
| 12/30265276 DC : 0 | BS EN 13001-3-3 - CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| I.S. EN 4632-004:2012 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS |
| UNE-EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN 13001-3-3:2014 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| DIN EN 13001-3-3:2015-02 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| EN 12513:2011 | Founding - Abrasion resistant cast irons |
| EN 10083-2:2006 | Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels |
| BS EN 4632-004:2012 | Aerospace series. Weldability and brazeability of materials in aerospace constructions Welding and brazing of homogeneous assemblies of high alloyed steels |
| UNE-EN 13001-3-3:2015 | Cranes - General design - Part 3-3: Limit states and proof of competence of wheel/rail contacts |
| BS EN 13001-3-3:2014 | Cranes. General design Limit states and proof of competence of wheel/rail contacts |
| PREN 12513 : DRAFT 2009 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| DIN EN 15049:2007-12 | Railway applications - Suspension components - Torsion bar, steel |
| DIN EN 12513:2011-05 | Founding - Abrasion resistant cast irons |
| I.S. EN 10083-2:2006 | STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOY STEELS |
| I.S. EN 12513:2011 | FOUNDING - ABRASION RESISTANT CAST IRONS |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| VDI 2737 : 2016 COR 2018 | CALCULATION OF THE LOAD CAPACITY OF THE TOOTH ROOT IN INTERNAL TOOTHINGS WITH INFLUENCE OF THE GEAR RIM |
| VDI 3405 Blatt 2:2013-08 | Additive manufacturing processes, rapid manufacturing - Beam melting of metallic parts - Qualification, quality assurance and post processing |
| UNI EN 12513 : 2011 | Founding - Abrasion resistant cast irons |
| NFL 06 380-22 : 2005 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 22: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS |
| BS EN 12513:2011 | Founding. Abrasion resistant cast irons |
| BS EN 10083-2:2006 | Steels for quenching and tempering Technical delivery conditions for non alloy steels |
| BS EN 15049:2007 | Railway applications. Suspension components. Torsion bar, steel |
| EN 15049:2007 | Railway applications - Suspension components - Torsion bar, steel |
| EN 4632-004:2012 | Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels |
| PREN 10253-2 : DRAFT 2017 | BUTT-WELDING PIPE FITTINGS - PART 2: NON ALLOY AND FERRITIC ALLOY STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| UNI EN 4632-004 : 2014 | AEROSPACE SERIES - WELDABILITY AND BRAZEABILITY OF MATERIALS IN AEROSPACE CONSTRUCTIONS - PART 004: WELDING AND BRAZING OF HOMOGENEOUS ASSEMBLIES OF HIGH ALLOYED STEELS |
| PREN 4632-004 : 200P1 | WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS |
| 05/30132598 DC : DRAFT APR 2005 | EN 10083-2 - STEELS FOR QUENCHING AND TEMPERING - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON ALLOYS STEELS |
| 08/30195539 DC : 0 | BS EN 4632-004 - WELDED AND BRAZED ASSEMBLIES FOR AEROSPACE CONSTRUCTIONS - WELDABILITY AND BRAZEABILITY OF MATERIALS - PART 004: HOMOGENEOUS ASSEMBLIES HIGHLY ALLOYED STEELS |
| I.S. EN 13001-3-3:2014 | CRANES - GENERAL DESIGN - PART 3-3: LIMIT STATES AND PROOF OF COMPETENCE OF WHEEL/RAIL CONTACTS |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6507-2:2005 | Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 4957:1999 | Tool steels |
| ISO 9513:2012 | Metallic materials — Calibration of extensometer systems used in uniaxial testing |
| ISO 6508-2:2015 | Metallic materials — Rockwell hardness test — Part 2: Verification and calibration of testing machines and indenters |
| ISO 4964:1984 | Steel Hardness conversions |
| EN 10083-1:2006 | Steels for quenching and tempering - Part 1: General technical delivery conditions |
| ISO 7500-1:2015 | Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system |
| ISO/TR 10108:1989 | Steel Conversion of hardness values to tensile strength values |
| DIN 17200:1987-03 | STEELS FOR QUENCHING AND TEMPERING - TECHNICAL DELIVERY CONDITIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.