EN ISO 8501-1:2007
Current
Current
The latest, up-to-date edition.
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007)
Published date
01-05-2007
Publisher
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Rust grades
3 Preparation grades
4 Procedure for visual assessment of steel substrates
5 Photographs
Annex A (informative) Representative photographic examples
of the change of appearance imparted to steel when
blast-cleaned with different abrasives
Bibliography
ISO 8501-1:2007 is a hardback A5-format book in four languages (English, French, German and Swedish), which specifies a series of rust grades and preparation grades of steel surfaces. The various grades are defined by written descriptions together with photographs that are representative examples within the tolerance for each grade as described in words.It is applicable to hot-rolled steel surfaces prepared for painting by methods such as blast-cleaning, hand and power tool cleaning and flame cleaning, although these methods rarely lead to comparable results. Essentially, these methods are intended for hot-rolled steel, but blast-cleaning methods, in particular, could also be used on cold-rolled steel of sufficient thickness to withstand any deformation caused by the impact of the abrasive or the effects of power tool cleaning.This part of ISO 8501 is applicable also to steel substrates that show residues of firmly adhering paint and other foreign matter in addition to residual mill scale.
| Committee |
CEN/TC 139
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 8501-1 : 2007 | Identical |
| ISO 8501-1:2007 | Identical |
| NBN EN ISO 8501-1 : 2007 | Identical |
| NEN EN ISO 8501-1 : 2007 | Identical |
| NS EN ISO 8501-1 : 1ED 2001 | Identical |
| I.S. EN ISO 8501-1:2007 | Identical |
| PN EN ISO 8501-1 : 2008 | Identical |
| SN EN ISO 8501-1 : 2008 | Identical |
| UNI EN ISO 8501-1 : 2012 | Identical |
| SS-EN ISO 8501-1:2007 | Identical |
| UNE-EN ISO 8501-1:2008 | Identical |
| BS EN ISO 8501-1:2007 | Identical |
| DIN EN ISO 8501-1:2007-12 | Identical |
| 14/30294476 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| 14/30297533 DC : 0 | BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| 08/30184309 DC : DRAFT SEP 2008 | BS EN 12952-5 - WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| BIS IS 16002-2 : 2012 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 2: WELDING PROPERTIES OF SHOP PRIMERS |
| 07/30163686 DC : 0 | BS EN 1440 - LPG EQUIPMENT AND ACCESSORIES - PERIODIC INSPECTION OF TRANSPORTABLE REFILLABLE LPG CYLINDERS |
| DIN EN 12496:2014-02 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
| 11/30246678 DC : 0 | BS EN 13480-4 - METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| 02/123296 DC : DRAFT SEP 2002 | BS EN ISO 2063 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| UNE-EN 16623:2015 | Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking |
| UNE-EN 13507:2011 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| I.S. EN 15711:2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| 16/30319005 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| BS EN 12285-1:2003 | Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| I.S. EN 1504-10:2017 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| DIN EN 12285-1:2016-10 (Draft) | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| I.S. EN 253:2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 448:2015 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 13894-1:2003 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading During cure |
| BS EN 14208:2004 | Transportable gas cylinders. Specification for welded pressure drums up to 1000 litre capacity for the transport of gases. Design and construction |
| BS EN 14901:2006 | Ductile iron pipes, fittings and accessories. Epoxy coating (heavy duty) of ductile iron fittings and accessories. Requirements and test methods |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| BS EN 10238:2009 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| I.S. EN 14901:2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| DIN EN 14914:2006-03 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION; PERIODIC INSPECTION |
| EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| EN 12952-5:2011 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| DIN EN 13894-1:2004-01 | Products and systems for the protection and repair of concrete structures - Test methods; Determination of fatigue under dynamic loading - Part 1: During cure |
| DIN EN 15711:2009-08 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| EN 10339:2007 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| EN 10238:2009 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| DIN EN 10238:2009-10 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation |
| DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| I.S. EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines -Bituminous hot applied materials for external coating |
| DIN EN 16623:2015-04 | PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING |
| DIN EN 1440:2016-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION |
| BS EN 13507:2010 | Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| BS EN 15711:2009 | Vitreous and porcelain enamels. Glass lined flanged steel pipes and flanged steel fittings. Quality requirements |
| BS EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Site application of products and systems and quality control of the works |
| 04/30114371 DC : DRAFT JUN 2004 | EN 10339 - STEEL TUBES FOR ONSHORE AND OFFSHORE WATER PIPELINES - INTERNAL LIQUID APPLIED EPOXY LININGS FOR CORROSION PROTECTION |
| BS EN 16623:2015 | Paints and varnishes. Reactive coatings for fire protection of metallic substrates. Definitions, requirements, characteristics and marking |
| 08/30190329 DC : DRAFT DEC 2008 | BS EN 10238 - AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| PREN 13480-4 : DRAFT 2011 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| PREN 1440 : DRAFT 2014 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION |
| BS EN 16728 : 2016 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| NF EN 13507 : 2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| DIN EN 16813:2015-01 (Draft) | THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD |
| BS EN 253 : 2009 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| DIN EN 14901:2014-12 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNE-EN 10238:2011 | Automatically blast-cleaned and automatically prefabrication primed structural steel products |
| I.S. EN 13480-4:2017 | METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| I.S. EN 12952-5:2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| I.S. EN 10238:2009 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| 15/30327977 DC : 0 | BS EN 1504-10 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 16/30319008 DC : 0 | BS EN 12285-3 - WORKSHOP FABRICATED STEEL TANKS - PART 3: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS FOR HEATING AND COOLING OF BUILDINGS |
| PREN 1504-10 : DRAFT 2015 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| 14/30260020 DC : 0 | BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS |
| 10/30234726 DC : 0 | BS EN 12496 - GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
| 16/30339226 DC : DRAFT JUNE 2016 | BS EN 13507 - THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| 07/30168488 DC : 0 | BS EN 253 - DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| PREN 12285-1 : DRAFT 2016 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS |
| I.S. EN 1440:2016 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION |
| DIN EN 16728:2016-07 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| PREN 13507 : DRAFT 2016 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| BS EN 1440 : 2016 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE TRADITIONAL WELDED AND BRAZED STEEL LIQUEFIED PETROLEUM GAS (LPG) CYLINDERS - PERIODIC INSPECTION |
| UNE-EN 16728:2016 | LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection |
| UNE-EN 12952-5:2012 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| EN 12285-1:2003 | Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids |
| UNE-EN 15711:2010 | Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements |
| DIN EN ISO 2063:2005-05 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| DIN EN 448:2016-02 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| BS EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings |
| BS EN 10310:2003 | Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings |
| UNI EN 12952-5 : 2011 | WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 5: WORKMANSHIP AND CONSTRUCTION OF PRESSURE PARTS OF THE BOILER |
| UNI EN 10238 : 2009 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| UNI EN 15711 : 2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| UNI EN 15189 : 2007 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 12496 : 2013 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
| UNI EN 1504-10 : 2005 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS - REQUIREMENTS - QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 10: SITE APPLICATION OF PRODUCTS AND SYSTEMS AND QUALITY CONTROL OF THE WORKS |
| UNI EN 14901 : 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 2063:2005 | THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
| I.S. EN 14914:2006 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - ALTERNATIVE DESIGN AND CONSTRUCTION - PERIODIC INSPECTION |
| 13/30263194 DC : 0 | BS EN 16623 - PAINTS AND VARNISHES - REACTIVE COATINGS FOR FIRE PROTECTION OF METALLIC SUBSTRATES - DEFINITIONS, REQUIREMENTS, CHARACTERISTICS AND MARKING |
| 14/30297536 DC : 0 | BS EN 16728 - LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| BS EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| UNE-EN 10310:2011 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| 14/30273520 DC : 0 | BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES |
| BS EN 16813:2016 | Thermal spraying. Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method |
| I.S. EN 16728:2016 | LPG EQUIPMENT AND ACCESSORIES - TRANSPORTABLE REFILLABLE LPG CYLINDERS OTHER THAN TRADITIONAL WELDED AND BRAZED STEEL CYLINDERS - PERIODIC INSPECTION |
| UNE-EN 16813:2017 | Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method |
| I.S. EN 13507:2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| 16/30339223 DC : 0 | BS EN 17002 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| PREN 14901 : DRAFT 2014 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| UNI EN 13507 : 2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| DIN EN 14208:2004-05 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| DIN EN 253:2015-12 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PIPE ASSEMBLY OF STEEL SERVICE PIPE, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| BS EN ISO 13691:2002 | Petroleum and natural gas industries. High-speed special-purpose gear units |
| BS EN ISO 17652-3:2003 | Welding. Test for shop primers in relation to welding and allied processes Thermal cutting |
| BS EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines. Internal coating for the reduction of friction for conveyance of non corrosive gas |
| BS EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings |
| UNE-EN 14901:2015 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| BS EN 12952-5:2011 | Water-tube boilers and auxiliary installations Workmanship and construction of pressure parts of the boiler |
| BS EN 13480-4:2017 | Metallic industrial piping Fabrication and installation |
| BS EN 10339:2007 | Steel tubes for onshore and offshore water pipelines. Internal liquid applied epoxy linings for corrosion protection |
| UNE-EN 13480-4:2017 | Metallic industrial piping - Part 4: Fabrication and installation (Endorsed by Asociación Española de Normalización in September of 2019.) |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| UNE-EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| ISO 17652-3:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 3: Thermal cutting |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| BS EN 10300:2005 | Steel tubes and fittings for onshore and offshore pipelines. Bitumen hot applied materials for external coating |
| ISO 17652-2:2003 | Welding — Test for shop primers in relation to welding and allied processes — Part 2: Welding properties of shop primers |
| BS EN 13894-2:2002 | Products and systems for the protection and repair of concrete structures. Test methods. Determination of fatigue under dynamic loading After hardening |
| UNE-EN 448:2017 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| BS EN 14914:2005 | LPG equipment and accessories. Transportable refillable welded steel cylinders for liquefied petroleum gas (LPG). Alternative design and construction. Periodic inspection |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN 13894-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 2: After hardening |
| EN ISO 2063:2005 | Thermal spraying - Metallic and other inorganic coatings - Zinc, aluminium and their alloys (ISO 2063:2005) |
| EN ISO 13691:2002 | Petroleum and natural gas industries - High-speed special-purpose gear units (ISO 13691:2001) |
| EN 14914:2005 | LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection |
| EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| EN 16623:2015 | Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking |
| EN 15711:2009 | Vitreous and porcelain enamels - Glass lined flanged steel pipes and flanged steel fittings - Quality requirements |
| EN 13894-1:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of fatigue under dynamic loading - Part 1: During cure |
| EN ISO 17652-3:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 3: Thermal cutting (ISO 17652-3:2003) |
| EN ISO 17652-2:2003 | Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
| EN 14901:2014 | Ductile iron pipes, fittings and accessories - Epoxy coating (heavy duty) of ductile iron fittings and accessories - Requirements and test methods |
| EN 14208:2004 | Transportable gas cylinders - Specification for welded pressure drums up to 1000 litre capacity for the transport of gases - Design and construction |
| DIN EN 15711 E : 2009 | VITREOUS AND PORCELAIN ENAMELS - GLASS LINED FLANGED STEEL PIPES AND FLANGED STEEL FITTINGS - QUALITY REQUIREMENTS |
| I.S. EN 16813:2016 | THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD |
| 02/704943 DC : DRAFT APR 2002 | PREN 10329 - STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| 14/30294800 DC : 0 | BS EN 14901 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EPOXY COATING (HEAVY DUTY) OF DUCTILE IRON FITTINGS AND ACCESSORIES - REQUIREMENTS AND TEST METHODS |
| BIS IS 16002-3 : 2012 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 3: THERMAL CUTTING |
| 08/30183878 DC : DRAFT AUG 2008 | BS EN 13507 - THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| 03/115789 DC : DRAFT SEP 2003 | EN 1440 - TRANSPORTABLE REFILLABLE WELDED STEEL CYLINDERS FOR LIQUEFIED PETROLEUM GAS (LPG) - PERIODIC REQUALIFICATION |
| PREN 10238 : DRAFT 2008 | AUTOMATICALLY BLAST-CLEANED AND AUTOMATICALLY PREFABRICATION PRIMED STRUCTURAL STEEL PRODUCTS |
| PREN 448 : DRAFT 2018 | DISTRICT HEATING PIPES - PREINSULATED BONDED PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE |
| I.S. EN 12496:2013 | GALVANIC ANODES FOR CATHODIC PROTECTION IN SEAWATER AND SALINE MUD |
| 18/30368651 DC : 0 | BS EN 448 - DISTRICT HEATING PIPES - BONDED SINGLE PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - FACTORY MADE FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND A CASING OF POLYETHYLENE |
| UNE-EN 1440:2016 | LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection |
| I.S. EN 12285-1:2003 | WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS |
| PREN 17002 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| DIN EN 13507:2016-07 (Draft) | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| BS EN 448:2015 | District heating pipes. Preinsulated bonded pipe systems for directly buried hot water networks. Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| DIN EN 12952-5:2012-01 | Water-tube boilers and auxiliary installations - Part 5: Workmanship and construction of pressure parts of the boiler |
| BS EN ISO 17652-2:2003 | Welding. Test for shop primers in relation to welding and allied processes Welding properties of shop primers |
| BS EN 14870-2:2004 | Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems Fittings |
| BS EN ISO 2063:2005 | Thermal spraying. Metallic and other inorganic coatings. Zinc, aluminium and their alloys |
| BS EN 1825-1:2004 | Grease separators Principles of design, performance and testing, marking and quality control |
| DIN EN 10310:2004-07 | Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings |
| DIN EN ISO 17652-3:2003-07 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 3: THERMAL CUTTING |
| DIN EN 13894-2:2003-01 | PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - DETERMINATION OF FATIGUE UNDER DYNAMIC LOADING - PART 2: AFTER HARDENING |
| EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| DIN EN ISO 17652-2:2003-07 | WELDING - TEST FOR SHOP PRIMERS IN RELATION TO WELDING AND ALLIED PROCESSES - PART 2: WELDING PROPERTIES OF SHOP PRIMERS |
| DIN EN 10290:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| DIN EN 10300:2006-02 | Steel tubes and fittings for onshore and offshore pipelines - Bituminous hot applied materials for external coating |
| DIN EN 10301:2004-01 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| DIN EN 10289:2004-08 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| DIN EN 10339:2007-05 | Steel tubes for onshore and offshore water pipelines - Internal liquid applied epoxy linings for corrosion protection |
| DIN EN 1825-1:2004-12 | Grease separators - Part 1: Principles of design, performance and testing, marking and quality control; German version EN 1825-1:2004 |
| ISO 11125-3:1993 | Preparation of steel substrates before application of paints and related products Test methods for metallic blast-cleaning abrasives Part 3: Determination of hardness |
| ISO 11124-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 3: High-carbon cast-steel shot and grit |
| ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
| ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
| ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
| ISO 8504-3:1993 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 3: Hand- and power-tool cleaning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.