Customer Support: +353 (0)1 857 6730

Corporate Website About Us
  • Shopping Cart
    There are no items in your cart
Please enter a keyword to search
Advanced search
Home
CEN
EN ISO 868:2003

EN ISO 868:2003

Current

Current

The latest, up-to-date edition.

Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)

Published date

01-03-2003

Publisher

Comite Europeen de Normalisation

Sorry this product is not available in your region.

1 Scope
2 Normative reference
3 Principle
4 Apparatus
5 Test specimens
6 Calibration
7 Conditioning and testing atmospheres
8 Procedure
9 Test report

ISO 868:2003 specifies a method for the determination of the indentation hardness of plastics and ebonite by means of durometers of two types: type A is used for softer materials and type D for harder materials. The method permits measurement either of the initial indentation or of the indentation after a specified period of time, or both.This method is an empirical method intended primarily for control purposes. No simple relationship exists between indentation hardness determined by this method and any fundamental property of the material tested. For specification purposes, it is recommended that ISO 48, Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD), be used for the softer materials.

Committee
CEN/TC 249
DocumentType
Standard
PublisherName
Comite Europeen de Normalisation
Status
Current

DIN EN 10245-5:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
BS EN 62444:2013 Cable glands for electrical installations
UNE-EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
UNE-EN 16261-3:2014 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
UNE-EN 50290-2-29:2016 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
BS EN 16256-5:2012 Pyrotechnic articles. Theatrical pyrotechnic articles Test methods
I.S. EN 10329:2006 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
I.S. EN 14035-22:2004 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
02/121901 DC : DRAFT MAY 2002 BS EN 14035-24 - FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
09/30201918 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
BS EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for glazing
02/123857 DC : DRAFT OCT 2002 BS EN 14035-17 - FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
UNE-EN 50290-2-33:2016 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
07/30160665 DC : 0 BS EN 12790 - CHILD USE AND CARE ARTICLES - RECLINED CRADLES
DIN EN 16265:2016-05 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES
I.S. EN 14035-13:2004 FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-35:2004 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-23:2003 FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
CEI EN 50290-2-25 : 2014 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
02/123860 DC : DRAFT OCT 2002 BS EN 14035-32 - FIREWORKS - PART 32: SNAPS - SPECIFICATION AND TEST METHODS
PREN 1504-2 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
DD CEN/TS 15185:2005 Furniture. Assessment of the surface resistance to abrasion
DIN EN 16263-4:2015-11 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS
02/123855 DC : DRAFT OCT 2002 BS EN 14035-14 - FIREWORKS - PART 14: FLYING SQUIB - SPECIFICATION AND TEST METHODS
CEI EN 50290-2-29 : 2002 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
DIN EN 13832-2:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
PD EN 14035-8:2004 Fireworks Bengal sticks. Specification and test methods
10/30216993 DC : 0 BS EN 295-4 - VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 16256-5:2013-03 PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS
I.S. EN 61076-7-100:2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
CEI 20-95 : 2010 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
CEI EN 61076-7-100 : 2007 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
CEI EN 60544-2 : 2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST
CEI EN 50290-2-33 : 1ED 2017 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE)
DIN EN 13832-3:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
BS EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for sanitary joints
ONORM EN 13832-1 : 2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
I.S. EN 61215-2:2017 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES
I.S. CEN TS 15185:2006 FURNITURE - ASSESSMENT OF THE SURFACE RESISTANCE TO ABRASION
I.S. EN 60684-3-214:2014 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL
EN 61215-2 : 2017 COR 2018 TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL - PART 2: TEST PROCEDURES (IEC 61215-2:2016/COR1:2018)
I.S. EN 50290-2-35:2016 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
ONORM EN 13832-3 : 2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
BS EN 50548 : 2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 15651-4:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
I.S. EN 62631-3-1:2016 DIELECTRIC AND RESISTIVE PROPERTIES OF SOLID INSULATING MATERIALS - PART 3-1: DETERMINATION OF RESISTIVE PROPERTIES (DC METHODS) - VOLUME RESISTANCE AND VOLUME RESISTIVITY - GENERAL METHOD
CEI EN 60684-3-247 : 2012 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
I.S. EN 14035-5:2006 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
I.S. HD 631.2:2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
HD 631.2 : 2007 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 2: FINGERPRINTING AND TYPE TESTS FOR HEAT SHRINKABLE COMPONENTS FOR LOW VOLTAGE APPLICATIONS
I.S. EN 50548:2011 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation - Part 3: Specifications for individual materials - Sheet 8: Resins for cable accessories
17/30359554 DC : 0 BS EN 13832-2 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
I.S. EN 50655-1:2017 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
16/30347811 DC : 0 BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
UNE-EN 15651-4:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 4: Sealants for pedestrian walkways
I.S. EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN EN 13121-1:2003-10 GRP tanks and vessels for use above ground - Part 1: Raw materials; Specification conditions and acceptance conditions
DIN EN 71-4:2013-05 Safety of toys - Part 4: Experimental sets for chemistry and related activities
DIN EN 1504-2:2015-03 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
EN 13121-1:2003 GRP tanks and vessels for use above ground - Part 1: Raw materials - Specification conditions and acceptance conditions
BS EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on metallic components
BS EN 14035-6:2004 Fireworks Bengal flames. Specification and test methods
BS EN 14035-35:2004 Fireworks Throwdowns. Specification and test methods
BS EN 295-3:2012 Vitrified clay pipe systems for drains and sewers Test methods
BS EN 13893:2002 Resilient, laminate and textile floor coverings. Measurement of dynamic coefficient of friction on dry floor surfaces
BS EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on concrete components
DIN EN 14035-35:2005-02 FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
DIN EN 14782:2006-03 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
CEN/TS 16354:2013 Laminate floor coverings - Underlays - Specification, requirements and test methods
EN 61076-7-100 : 2006 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRODUCT REQUIREMENTS - PART 7-100: CABLE OUTLET ACCESSORIES - DETAIL SPECIFICATION FOR A METRIC CABLE SEALING CONSISTING OF AN INTEGRATED PART OF HEAVY-DUTY RECTANGULAR OR CIRCULAR CONNECTOR HOODS AND A SEALING SYSTEM
EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
EN 50290-2-37:2016 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
EN 10245-1:2011 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
DIN EN 15062:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
DIN EN 14879-4:2008-01 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
CEN/TS 15185:2005 Furniture - Assessment of the surface resistance to abrasion
EN 50290-2-29:2016 Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
EN 10245-2:2011 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
DIN EN 14879-2:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
EN 50655-1:2017 Electric cables - Accessories - Material characterization - Part 1: Fingerprinting for resinous compounds
EN 10245-5:2011 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
EN 12488:2016 Glass in building - Glazing recommendations - Assembly principles for vertical and sloping glazing
EN 50290-2-25:2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
EN 12790:2009 Child use and care articles - Reclined cradles
EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers - Part 2: Requirement for bushing components
DIN EN 15189:2007-02 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
DIN EN 15551:2011-01 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
I.S. EN 14865-2:2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
EN 50368:2003 Cable cleats for electrical installations
DIN EN 13696:2009-02 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
DIN EN 14035-10:2004-11 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
07/30161873 DC : 0 EN 15651-4 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
UNE-EN 50290-2-23:2014 Communication cables - Part 2-23: Common design rules and construction - Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
I.S. EN 14035-24:2004 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
I.S. EN 15651-2:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
07/30149374 DC : 0 BS EN 15673-1 - DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHOD OF EVALUATION - PART 1: REFERENCE METHOD
DIN EN 14035-31:2006-01 FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
I.S. EN 62790:2015 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES - SAFETY REQUIREMENTS AND TESTS
07/30161895 DC : 0 BS EN 15649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 14035-27:2003 FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS
CEI EN 62217 : 2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 50290-2-23:2013 Communication cables Common design rules and construction. Polyethylene insulation for multi-pair cables used in access telecommunication networks: Outdoor cables
02/123859 DC : DRAFT OCT 2002 BS EN 14035-20 - FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-7:2004 FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS
BS EN 50180-2:2015 Bushings above 1 kV up to 52 kV and from 250 A to 3,15 kA for liquid filled transformers Requirement for bushing components
PD EN 14035-3:2004 Fireworks Aerial wheels. Specification and test methods
I.S. EN 16523-1:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
DIN EN 15551:2013-05 (Draft) RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
DIN EN 15651-3:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
CEI EN 50290-2-35 : 1ED 2017 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
BS EN 10245-5:2011 Steel wire and wire products. Organic coatings on steel wire Polyamide coated wire
I.S. EN 62444:2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010 (MOD))
PREN 62444 : DRAFT 2013 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS (IEC 62444:2010, MODIFIED)
I.S. EN 50180-2:2015 BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
BS EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials Determination of resistive properties (DC methods). Volume resistance and volume resistivity. General method
DIN EN 15651-1:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
BS EN 61076-7-100:2006 Connectors for electronic equipment. Product requirements Cable outlet accessories. Detail specification for a metric cable sealing consisting of an integrated part of heavy-duty rectangular or circular connector hoods and a sealing system
DIN EN 16264:2014-11 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
PREN 50655-1 : DRAFT 2015 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
09/30200146 DC : 0 BS EN ISO 20344 - PERSONAL PROTECTIVE EQUIPMENT - TEST METHODS FOR FOOTWEAR
DIN EN 16028:2012-10 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
DIN EN 15651-4:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
15/30297361 DC BS ISO 26261-3. Fireworks. Category 4. Part 3. Test methods
S.R. CEN/TS 16165:2016 DETERMINATION OF SLIP RESISTANCE OF PEDESTRIAN SURFACES - METHODS OF EVALUATION
PD EN 14035-13:2004 Fireworks Flash pellets. Specification and test methods
04/30095724 DC : DRAFT APR 2004 EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS AND MICRO-ORGANISMS - PART 1: TERMINOLOGY AND TEST METHODS
08/30180835 DC : DRAFT JUNE 2008 BS EN 10245-1 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
BS EN 15551:2017 Railway applications. Railway rolling stock. Buffers
I.S. EN 14035-31:2005 FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
UNE-EN 50290-2-25:2014 Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
I.S. EN 50290-2-29:2016 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
02/123852 DC : DRAFT OCT 2002 BS EN 14035-9 - FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
03/319405 DC : DRAFT NOV 2003 BS EN 14035-37 - FIREWORKS - PART 37: WHISTLERS - SPECIFICATION AND TEST METHODS
04/30123591 DC : DRAFT OCT 2004 EN 15062 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
DIN EN 71-13:2014-07 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
I.S. EN 50290-2-37:2016 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
UNE-EN 16264:2015 Pyrotechnic articles - Other pyrotechnic articles - Cartridges for powder actuated tools
UNI EN 71-4 : 2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
CEI EN 50290-2-37 : 1ED 2017 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 124-1:2015 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS
I.S. EN 50290-2-33:2016 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION COMPOUNDS FOR MULTI ELEMENT METALLIC CABLES FOR INDOOR INSTALLATION (DATA CABLE)
EN 13832-1:2006 Footwear protecting against chemicals - Part 1: Terminology and test methods
CEI EN 60455-3-8 : 2014 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES
CEI EN 50290-2-38 : 1ED 2017 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 12488:2016 GLASS IN BUILDING - GLAZING RECOMMENDATIONS - ASSEMBLY PRINCIPLES FOR VERTICAL AND SLOPING GLAZING
PREN 16354 : DRAFT 2016 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 14035-3:2004 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
BS EN 15947-4 : 2016 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
16/30333219 DC : 0 BS EN 16354 - LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
EN 16523-2:2015 Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact
I.S. EN 16028:2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
CEI EN 62444 : 2014 CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
EN 13832-2:2006 Footwear protecting against chemicals - Part 2: Requirements for footwear resistant to chemicals under laboratory conditions
DIN EN 1392:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing of bond strength under specified conditions
I.S. EN 13121-1:2003 GRP TANKS AND VESSELS FOR USE ABOVE GROUND - PART 1: RAW MATERIALS - SPECIFICATION CONDITIONS AND ACCEPTANCE CONDITIONS
DIN EN 14294:2010-06 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
DIN EN 14782:2015-09 (Draft) SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
DIN EN 14354:2005-03 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
BS EN 295-4:2013 Vitrified clay pipe systems for drains and sewers Requirements for adaptors, connectors and flexible couplings
BS EN 12790:2009 Child use and care articles. Reclined cradles
BS EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining. Product specification and requirements
BS EN 15307:2014 Adhesives for leather and footwear materials. Sole-upper bonds. Minimum strength requirements
BS EN 71-4:2013 Safety of toys Experimental sets for chemistry and related activities
I.S. EN 15346:2014 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14035-24:2004-11 FIREWORKS - PART 24: NOVELTY MATCHES - SPECIFICATION AND TEST METHODS
DIN EN 14035-12:2003-09 FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
I.S. EN 12790:2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
I.S. EN 71-4:2013 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
DIN EN 14035-25:2006-01 FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
I.S. EN 10245-2:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
DIN EN 14035-28:2004-11 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
I.S. EN 10245-1:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 14035-34:2003-09 FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS
DIN EN 14035-22:2004-11 FIREWORKS - PART 22: MINES - SPECIFICATION AND TEST METHODS
DIN EN 14035-8:2004-11 FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS
DIN EN 14035-23:2003-09 FIREWORKS - PART 23: NON-HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
DIN EN 14035-7:2004-11 FIREWORKS - PART 7: BENGAL MATCHES - SPECIFICATION AND TEST METHODS
I.S. EN 10245-4:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 295-3:2012 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
DIN EN 14035-6:2004-11 FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS
I.S. EN 1392:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIED CONDITIONS
DIN EN 14035-27:2003-09 FIREWORKS - PART 27: ROCKETS - SPECIFICATION AND TEST METHODS
DIN EN 14035-9:2004-11 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
DIN EN 14035-5:2006-05 FIREWORKS - PART 5: BATTERIES AND COMBINATIONS - SPECIFICATION AND TEST METHODS
I.S. EN 15307:2014 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
DIN EN 14035-3:2004-11 FIREWORKS - PART 3: AERIAL WHEELS - SPECIFICATION AND TEST METHODS
I.S. EN 14354:2017 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
DIN EN 14035-15:2003-09 FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS
I.S. EN 15468:2016 LAMINATE FLOOR COVERINGS - ELEMENTS WITH DIRECTLY APPLIED PRINTING AND RESIN SURFACE LAYER - SPECIFICATIONS, REQUIREMENTS AND TEST METHODS
I.S. EN 14294:2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES
DIN EN 14035-4:2003-09 FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS
I.S. EN 295-4:2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 13832-1:2006-11 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
DIN EN 14035-19:2003-09 FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
I.S. EN 15434:2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRAVIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
DIN EN 14035-38:2006-05 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
VDI 3388:2012-03 Materials for trimming and forming dies
VDI 2083 Blatt 9.2:2017-01 Cleanroom technology - Consumables in the cleanroom
BS 7933-1:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for resinous compounds
UNE-EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
UNE-EN 71-13:2015 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
DIN EN 71-13 E : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
BS EN 50617-1:2015 Railway applications. Technical parameters of train detection systems for the interoperability of the trans-European railway system Track circuits
I.S. EN 14035-28:2004 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
BS EN 50290-2-38:2016 Communication cables Common design rules and construction. Polypropylene insulation for coaxial cables
15/30325650 DC : 0 BS EN 50655-1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 1: FINGERPRINTING FOR RESINOUS COMPOUNDS
03/319403 DC : DRAFT NOV 2003 BS EN 14035-31 - FIREWORKS - PART 31: SHELL-IN-MORTARS - SPECIFICATION AND TEST METHODS
BS EN 50290-2-33:2016 Communication cables Common design rules and construction. Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
I.S. EN 14035-25:2005 FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-15:2003 FIREWORKS - PART 15: FOUNTAINS - SPECIFICATION AND TEST METHODS
13/30281390 DC : 0 BS EN 50290-2-25 - COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
UNE-EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
BS EN 60455-3-8:2013 Resin based reactive compounds used for electrical insulation Specifications for individual materials. Sheet 8: Resins for cable accessories
BS EN 62790:2015 Junction boxes for photovoltaic modules. Safety requirements and tests
09/30214460 DC : 0 BS EN 50548 - JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
I.S. EN 16261-3:2012 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORY 4 - PART 3: TEST METHODS
BS EN 16263-4:2015 Pyrotechnic articles. Other pyrotechnic articles Test methods
PD CEN/TR 14548:2003 Adhesives. Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
BS EN 16265:2015 Pyrotechnic articles. Other pyrotechnic articles. Ignition devices
PD EN 14035-21:2005 Fireworks Jumping ground spinners. Specification and test methods
15/30313584 DC : 0 BS ISO 25649-1 - FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 14035-34:2003 FIREWORKS - PART 34: TABLE BOMBS - SPECIFICATION AND TEST METHODS
08/30180847 DC : DRAFT JUNE 2008 BS EN 10245-5 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
BS EN 60544-2:2012 Electrical insulating materials. Determination of the effects of ionizing radiation on insulating materials Procedures for irradiation and test
16/30336762 DC : 0 BS EN 50290-2-29 - COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
04/30123559 DC : DRAFT OCT 2004 EN 1392 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING OF BOND STRENGTH UNDER SPECIFIC CONDITIONS
I.S. EN 14035-19:2003 FIREWORKS - PART 19: HAND-HELD SPARKLERS - SPECIFICATION AND TEST METHODS
PREN 14782 : DRAFT 2015 SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS
12/30265301 DC : 0 BS EN 124-1 - GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: CLASSIFICATION, COMMON DESIGN, PERFORMANCE AND TESTING REQUIREMENTS, TEST METHODS AND EVALUATION OF CONFORMITY
I.S. EN 16523-2:2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
14/30301841 DC : 0 BS EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
PREN 14187-5 : DRAFT 2016 COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
DIN EN 16261-3:2013-03 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
PREN 13832-2 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR LIMITED CONTACT WITH CHEMICALS
11/30246171 DC : 0 BS EN 71-4 - SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
04/30122632 DC : DRAFT SEP 2004 CEN/BT/TF 158 N13 - DISPENSE SYSTEMS FOR DRAUGHT BEVERAGES - PART 10: CONNECTORS FOR TAPPING UNITS OF BEVERAGE DISPENSING SYSTEMS, MATING DIMENSIONS
BS EN 15649-1 : 2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
03/319400 DC : DRAFT NOV 2003 BS EN 14035-21 - FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
05/30133728 DC : DRAFT MAY 2005 EN 71-1 - SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
BS EN 13832-3:2006 Footwear protecting against chemicals Requirements for footwear highly resistant to chemicals under laboratory conditions
PD CEN/TR 15990:2010 Data sheets. Footwear tests materials and test adhesives
13/30279826 DC : 0 BS EN 15551 - RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
BS EN 50290-2-37:2016 Communication cables Common design rules and construction. Polyethylene insulation for coaxial cables
EN 115-1:2017 Safety of escalators and moving walks - Part 1: Construction and installation
BS EN 50290-2-25:2013 Communication cables Common design rules and construction. Polypropylene insulation compounds
BS EN 16264:2014 Pyrotechnic articles. Other pyrotechnic articles. Cartridges for powder actuated tools
BS EN 62217:2013 Polymeric HV insulators for indoor and outdoor use. General definitions, test methods and acceptance criteria
14/30293503 DC : 0 BS EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
UNI CEN/TS 16354 : 2014 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
PREN 13832-1 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
08/30180838 DC : DRAFT JUNE 2008 BS EN 10245-2 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
PD EN 14035-17:2004 Fireworks Ground spinners. Specification and test methods
BS EN 16028:2012 Railway applications. Wheel/rail friction management. Lubricants for trainborne and trackside applications
13/30293736 DC : 0 BS EN 50290-2-33 - COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION
UNE-EN 15649-1:2010 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
PREN 71-1 : DRAFT 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
HD 631.1 : 200S2 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
I.S. EN 16264:2014 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
I.S. EN 60544-2:2012 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION ON INSULATING MATERIALS - PART 2: PROCEDURES FOR IRRADIATION AND TEST (IEC 60544-2:2012 (EQV))
PD EN 14035-4:2003 Fireworks Bangers and banger batteries. Specification and test methods
BS EN 13832-2:2006 Footwear protecting against chemicals Requirements for footwear resistant to chemicals under laboratory conditions
UNI EN 71-1 : 2015 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
I.S. EN 50290-2-38:2016 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION FOR COAXIAL CABLES
PREN 50290-2-38 : DRAFT 2013 COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 60455-2:2015 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 2: METHODS OF TEST
I.S. EN 14035-21:2005 FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
DIN EN 15947-4:2016-02 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
I.S. EN 50368:2003 CABLE CLEATS FOR ELECTRICAL INSTALLATIONS
I.S. EN 15651-1:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
I.S. EN 15551:2017 RAILWAY APPLICATIONS - RAILWAY ROLLING STOCK - BUFFERS
UNE-EN 50290-2-38:2016 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
PREN 295-4 : DRAFT 2010 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
I.S. EN 14035-33:2005 FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
UNE-EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
EN 16523-1:2015 Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact
BS EN 60684-3-247 : 2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011)
PREN 16759 : DRAFT 2014 STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
DIN EN 71-1:2015-02 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
ONORM EN 13832-2 : 2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
DIN EN 12790:2009-07 Child use and care articles - Reclined cradles
DIN EN 295-4:2013-05 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
DIN EN 15346:2015-01 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 14035-25:2005 Fireworks Party poppers. Specification and test methods
BS EN 1392:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing of bond strength under specified conditions
BS EN 13121-1:2003 GRP tanks and vessels for use above ground Raw materials. Specification conditions and acceptance conditions
BS EN 10329 : 2005 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
BS EN 10289:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied epoxy and epoxy-modified coatings
BS EN 14035-22:2004 Fireworks Mines. Specification and test methods
BS EN 14035-7:2004 Fireworks Bengal matches. Specification and test methods
BS EN 1504-2:2004 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Surface protection systems for concrete
BS EN 10310:2003 Steel tubes and fittings for onshore and offshore pipelines. Internal and external polyamide powder based coatings
EN 62790:2015 Junction boxes for photovoltaic modules - Safety requirements and tests
DIN EN 1504-2:2005-01 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete; German version EN 1504-2:2004
DIN EN 1504-7:2006-11 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 14354:2017 Wood-based panels - Wood veneer floor coverings
EN 14035-21:2005 Fireworks - Part 21: Jumping ground spinners - Specification and test methods
EN 14035-20:2005 Fireworks - Part 20: Jumping crackers - Specification and test methods
UNI EN 16028 : 2012 RAILWAY APPLICATIONS - WHEEL/RAIL FRICTION MANAGEMENT - LUBRICANTS FOR TRAINBORNE AND TRACKSIDE APPLICATIONS
UNI EN 15434 : 2010 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNI EN 1504-7 : 2007 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
UNI EN 15189 : 2007 DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS
UNI EN 295-3 : 2012 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 3: TEST METHODS
UNI EN 14865-2 : 2011 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
UNI EN 10245-1 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
UNI EN 10245-2 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 2: PVC FINISHED WIRE
UNI EN 295-4 : 2013 VITRIFIED CLAY PIPE SYSTEMS FOR DRAINS AND SEWERS - PART 4: REQUIREMENTS FOR ADAPTORS, CONNECTORS AND FLEXIBLE COUPLINGS
EN 50290-2-33:2016 Communication cables - Part 2-33: Common design rules and construction - Polyethylene insulation compounds for multi element metallic cables for indoor installation (data cable)
UNI EN 10245-4 : 2011 Wire and drawn steel products - Organic coatings on steel wires - Part 4: Polyester coated wires
UNI EN 12790 : 2009 CHILD USE AND CARE ARTICLES - RECLINED CRADLES
UNI EN 14294 : 2010 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - PREPARATION OF BONDED TEST PIECES BY MOULDING-ON PROCESSES
CEI EN 60684-3-214 : 2015 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 214: HEAT-SHRINKABLE, POLYOLEFIN SLEEVING, NOT FLAME RETARDED, THICK AND MEDIUM WALL
02/123856 DC : DRAFT OCT 2002 BS EN 14035-16 - FIREWORKS - PART 16: FRICTION-IGNITED FLASH BANGERS - SPECIFICATION AND TEST METHODS
I.S. EN 15062:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
12/30254141 DC : 0 BS EN 15651-4 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
16/30337049 DC : 0 BS EN 50290-2-34 - COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES
BS EN 61215-2:2017 Terrestrial photovoltaic (PV) modules. Design qualification and type approval Test procedures
03/319402 DC : DRAFT NOV 2003 BS EN 14035-26 - FIREWORKS - PART 26: PERCUSSION CAPS - SPECIFICATION AND TEST METHODS
PREN 50290-2-33 : DRAFT 2013 COMMUNICATION CABLES - PART 2-33: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI ELEMENT METALLIC DATA CABLES FOR INDOOR APPLICATION
03/319401 DC : DRAFT NOV 2003 BS EN 14035-25 - FIREWORKS - PART 25: PARTY POPPERS - SPECIFICATION AND TEST METHODS
BS EN 12488:2016 Glass in building. Glazing recommendations. Assembly principles for vertical and sloping glazing
DIN EN 15651-2:2016-10 (Draft) SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
BS EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes Specification for individual materials. Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
10/30195690 DC : 0 BS EN 13832-3 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
12/30254135 DC : 0 BS EN 15651-2 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
UNI EN 10245-5 : 2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
CEI EN 50290-2-23 : 2014 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
BS EN 14187-5:2003 Cold applied joint sealants Test method for the determination of the resistance to hydrolysis
PREN 15651-4 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 4: SEALANTS FOR PEDESTRIAN WALKWAYS
BS EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas Definitions, classification, general principles of design, performance requirements and test methods
UNE-EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
13/30281710 DC : 0 BS EN 62444 - CABLE GLANDS FOR ELECTRICAL INSTALLATIONS
13/30293741 DC : 0 BS EN 50290-2-37 - COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
UNE-EN 10310:2011 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
UNE-EN 15947-4:2016 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
UNE-EN 16265:2016 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
PD EN 14035-10:2004 Fireworks Double bangers. Specification and test methods
BS EN 50368:2003 Cable cleats for electrical installations
PREN 13832-3 : DRAFT 2017 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR PROLONGED CONTACT WITH CHEMICALS
UNI EN 13696 : 2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
DIN EN 15649-1:2014-06 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
BS EN 60455-2:2015 Resin based reactive compounds used for electrical insulation Methods of test
PD EN 14035-31:2005 Fireworks Shell-in-mortars. Specification and test methods
DIN EN 14035-13:2004-11 FIREWORKS - PART 13: FLASH PELLETS - SPECIFICATION AND TEST METHODS
PD EN 14035-9:2004 Fireworks Crackling granules. Specification and test methods
08/30180844 DC : DRAFT JUNE 2008 BS EN 10245-4 - STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 4: POLYESTER COATED WIRE
I.S. EN 14035-38:2006 FIREWORKS - PART 38: SHOT TUBES - SPECIFICATION AND TEST METHODS
03/319404 DC : DRAFT NOV 2003 BS EN 14035-33 - FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
UNE-EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
PD CEN/TS 16354:2013 Laminate floor coverings. Underlays. Specification, requirements and test methods
12/30254132 DC : 0 BS EN 15651-1 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
02/123861 DC : DRAFT OCT 2002 BS EN 14035-35 - FIREWORKS - PART 35: THROWDOWNS - SPECIFICATION AND TEST METHODS
BS 7933-2:2007 Electric cables. Accessories. Material characterisation Fingerprinting and type tests for heat shrinkable components for low voltage applications
02/123853 DC : DRAFT OCT 2002 BS EN 14035-10 - FIREWORKS - PART 10: DOUBLE BANGER - SPECIFICATION AND TEST METHODS
16/30336750 DC : 0 BS EN 50290-2-35 - COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
BS EN 60684-3-214:2014 Flexible insulating sleeving Specifications for individual types of sleeving. Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
PD EN 14035-12:2003 Fireworks Flash bangers and flash banger batteries. Specification and test methods
DIN EN 16523-1:2015-04 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
BS EN 16523-2:2015 Determination of material resistance to permeation by chemicals Permeation by gaseous chemical under conditions of continuous contact
PREN 15651-2 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 2: SEALANTS FOR GLAZING
DIN EN 124-1:2015-09 GULLY TOPS AND MANHOLE TOPS FOR VEHICULAR AND PEDESTRIAN AREAS - PART 1: DEFINITIONS, CLASSIFICATION, GENERAL PRINCIPLES OF DESIGN, PERFORMANCE REQUIREMENTS AND TEST METHODS
DIN 16742:2013-10 PLASTICS MOULDED PARTS - TOLERANCES AND ACCEPTANCE CONDITIONS
UNI EN 71-13 : 2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
UNI EN 15649-1 : 2014 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
I.S. EN 16256-5:2012 PYROTECHNIC ARTICLES - THEATRICAL PYROTECHNIC ARTICLES - PART 5: TEST METHODS
I.S. EN 14035-9:2004 FIREWORKS - PART 9: CRACKLING GRANULES - SPECIFICATION AND TEST METHODS
I.S. EN 62217:2013 POLYMERIC HV INSULATORS FOR INDOOR AND OUTDOOR USE - GENERAL DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA (IEC 62217:2012 (EQV))
I.S. EN 50617-1:2015 RAILWAY APPLICATIONS - TECHNICAL PARAMETERS OF TRAIN DETECTION SYSTEMS FOR THE INTEROPERABILITY OF THE TRANS-EUROPEAN RAILWAY SYSTEM - PART 1: TRACK CIRCUITS
I.S. EN 13832-3:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 3: REQUIREMENTS FOR FOOTWEAR HIGHLY RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
I.S. EN 60684-3-247:2011 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL
I.S. EN 14035-12:2003 FIREWORKS - PART 12: FLASH BANGERS AND FLASH BANGER BATTERIES - SPECIFICATION AND TEST METHODS
PREN 15307 : DRAFT 2014 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
I.S. EN 13696:2009 WOOD FLOORING - TEST METHODS TO DETERMINE ELASTICITY AND RESISTANCE TO WEAR AND IMPACT RESISTANCE
PREN 50290-2-37 : DRAFT 2013 COMMUNICATION CABLES - PART 2-37: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
I.S. EN 71-13:2014 SAFETY OF TOYS - PART 13: OLFACTORY BOARD GAMES, COSMETIC KITS AND GUSTATIVE GAMES
14/30311496 DC : 0 BS EN 14187-5 - COLD APPLIED JOINT SEALANTS - TEST METHODS - PART 5: DETERMINATION OF THE RESISTANCE TO HYDROLYSIS
17/30359551 DC : 0 BS EN 13832-1 - FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
15/30316975 DC : 0 BS EN 1504-2 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 2: SURFACE PROTECTION SYSTEMS FOR CONCRETE
PD EN 14035-18:2004 Fireworks Hand-held fountains. Specification and test methods
I.S. EN 15947-4:2015 PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES F1, F2 AND F3 - PART 4: TEST METHODS
UNE-EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 14187-5:2003 Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis
DIN EN 295-3:2012-03 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
I.S. EN 14035-17:2004 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
I.S. EN 50290-2-25:2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
I.S. EN 14035-10:2004 FIREWORKS - PART 10: DOUBLE BANGERS - SPECIFICATION AND TEST METHODS
I.S. EN 71-1:2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
S.R. CEN TR 15990:2010 DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES
EN 15468:2016 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
DIN EN 14865-2:2011-01 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h (includes Amendment A2:2010)
DIN EN 10245-4:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire; German version EN 10245-4:2011
BS EN 1504-7:2006 Products and systems for the protection and repair of concrete structures. Definitions, requirements, quality control and evaluation of conformity Reinforcement corrosion protection
BS EN 14354:2017 Wood-based panels. Wood veneer floor coverings
ISO 9054:1990 Cellular plastics, rigid — Test methods for self-skinned, high-density materials
UNE-EN 16028:2013 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
UNE-EN 1504-2:2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
BS EN 15062:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
DIN EN 15307:2015-04 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
BS EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines. External liquid applied polyurethane and polyurethane-modified coatings
UNE-EN 14294:2010 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
15/30324856 DC : 0 BS EN 115-1 - SAFETY OF ESCALATORS AND MOVING WALKS - PART 1: CONSTRUCTION AND INSTALLATION
BS EN 13529:2003 Products and systems for the protection and repair of concrete structures. Test methods. Determination of resistance to severe chemical attack
BS EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components
BS EN 14035-38:2006 Fireworks Shot tubes. Specification and test methods
BS EN 15434 : 2006 GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
UNE-EN 10245-4:2012 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
UNE-EN 15307:2015 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
BS EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Coatings on concrete components
BS EN 14035-34:2003 Fireworks Table bombs. Specification and test methods
BS EN 14035-19:2003 Fireworks Hand-held sparklers. Specification and test methods
UNE-EN 10245-2:2012 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire
BS EN ISO 2039-2:2000 Determination of Rockwell hardness. Rockwell hardness Rockwell hardness
DIN EN 15434:2010-07 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) (includes Amendment A1:2010)
BS EN 15468:2016 Laminate floor coverings. Elements with directly applied printing and resin surface layer. Specifications, requirements and test methods
BS EN 14035-24:2004 Fireworks Novelty matches. Specification and test methods
BS EN 14035-23:2003 Fireworks Non-hand-held sparklers. Specification and test methods
BS EN 15189:2006 Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods
BS EN 10245-4:2011 Steel wire and wire products. Organic coatings on steel wire Polyester coated wire
BS EN 10245-1:2011 Steel wire and wire products. Organic coatings on steel wire General rules
UNE-EN 71-4:2013 Safety of toys - Part 4: Experimental sets for chemistry and related activities
BS EN 14510:2005 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Determination of sole positioning tack (spotting tack)
UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
UNE-EN 10245-1:2012 Steel wire and wire products - Organic coatings on steel wire - Part 1: General rules
BS EN 14035-15:2003 Fireworks Fountains. Specification and test methods
BS EN 14035-5:2006 Fireworks Batteries and combinations. Specification and test methods
DIN EN 15468:2016-08 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
DIN EN 10245-1:2012-01 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 1: GENERAL RULES
DIN EN 13893:2003-02 RESILIENT, LAMINATE AND TEXTILE FLOOR COVERINGS - MEASUREMENT OF DYNAMIC COEFFICIENT OF FRICTION ON DRY FLOOR SURFACES
EN 14035-3:2004 Fireworks - Part 3: Aerial wheels - Specification and test methods
EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
EN 295-3:2012 Vitrified clay pipe systems for drains and sewers - Part 3: Test methods
EN 16261-3:2012 Pyrotechnic articles - Fireworks, Category 4 - Part 3: Test methods
EN 14879-3:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 14879-2:2006 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 2: Coatings on metallic components
EN 14035-7:2004 Fireworks - Part 7: Bengal matches - Specification and test methods
EN 14879-5:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
EN 14510:2005 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack)
EN 15189:2006 Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods
EN 14035-25:2005 Fireworks - Part 25: Party Poppers - Specification and test methods
EN 13696:2008 Wood flooring - Test methods to determine elasticity and resistance to wear and impact resistance
EN 14035-35:2004 Fireworks - Part 35: Throwdowns - Specification and test methods
EN 14294:2010 Adhesives for leather and footwear materials - Preparation of bonded test pieces by moulding-on processes
EN ISO 2039-2:1999 Plastics - Determination of hardness - Part 2: Rockwell hardness (ISO 2039-2:1987)
EN 14035-22:2004 Fireworks - - Part 22: Mines - Specification and test methods
EN 15434:2006+A1:2010 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
EN 14035-24:2004 Fireworks - Part 24: Novelty matches - Specification and test methods
EN 16028:2012 Railway applications - Wheel/rail friction management - Lubricants for trainborne and trackside applications
EN 15551:2017 Railway applications - Railway rolling stock - Buffers
EN 15062:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
EN ISO 9054:1999 Cellular plastics, rigid - Test methods for self-skinned, high-density materials (ISO 9054:1990)
EN 15947-4:2015 Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
EN 14035-8:2004 Fireworks - Part 8: Bengal sticks - Specification and test methods
EN 15649-1:2009+A2:2013 Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods
EN 14035-17:2004 Fireworks - Part 17: Ground spinners - Specification and test methods
EN 15651-3:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 3: Sealants for sanitary joints
EN 14035-33:2005 Fireworks - Part 33: Spinners - Specification and test methods
EN 1392:2006 Adhesives for leather and footwear materials-Solvent-based and dispersion adhesives-Testing of bond strength under specified conditions
EN 14035-10:2004 Fireworks - Part 10: Double Bangers - Specification and test methods
EN 14035-13:2004 Fireworks - Part 13: Flash pellets - Specification and test methods
EN 1504-7:2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection
EN 16265:2015 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices
EN 14782:2006 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements
EN 14035-18:2004 Fireworks - Part 18: Hand-held fountains - Specification and test methods
EN 14035-6:2004 Fireworks - Part 6: Bengal flames - Specification and test methods
EN 16256-5:2012 Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
EN 16263-4:2015 Pyrotechnic articles - Other pyrotechnic articles - Part 4: Test methods
EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
EN 10245-4:2011 Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire
EN 14865-2:2006+A2:2010 Railway applications - Axlebox lubricating greases - Part 2: Method to test the mechanical stability to cover vehicle speeds up to 200 km/h
EN 1504-2:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete
EN 14035-31:2005 Fireworks - Part 31: Shell-in-mortars - Specification and test methods
EN 14035-28 : 2004 COR 2006 FIREWORKS - PART 28: ROMAN CANDLES - SPECIFICATION AND TEST METHODS
EN 15307:2014 Adhesives for leather and footwear materials - Sole-upper bonds - Minimum strength requirements
EN 14035-9:2004 Fireworks - Part 9: Crackling granules - Specification and test methods
EN 13893:2002 Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces
EN 14879-4:2007 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components
EN 15346:2014 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 1: Sealants for facade elements
EN 14035-38:2006 Fireworks - Part 38: Shot tubes - Specification and test methods
EN 14035-5:2006 Fireworks - Part 5: Batteries and combinations - Specification and test methods
14/30303444 DC : 0 BS EN 15947-4 - PYROTECHNIC ARTICLES - FIREWORKS, CATEGORIES 1, 2 AND 3 - PART 4: TEST METHODS
EN 71-13:2014 Safety of toys - Part 13: Olfactory board games, cosmetic kits and gustative games
PD EN 14035-20:2005 Fireworks Jumping crackers. Specification and test methods
PD EN 14035-33:2006 Fireworks Spinners. Specification and test methods
UNI EN 16264 : 2014 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - CARTRIDGES FOR POWDER ACTUATED TOOLS
PREN 71-4 : DRAFT 2011 SAFETY OF TOYS - PART 4: EXPERIMENTAL SETS FOR CHEMISTRY AND RELATED ACTIVITIES
PREN 15651-1 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 1: SEALANTS FOR FACADE ELEMENTS
UNE-EN 16256-5:2013 Pyrotechnic articles - Theatrical pyrotechnic articles - Part 5: Test methods
02/123858 DC : DRAFT OCT 2002 BS EN 14035-18 - FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS
I.S. EN 14035-6:2004 FIREWORKS - PART 6: BENGAL FLAMES - SPECIFICATION AND TEST METHODS
UNE-EN 10245-5:2012 Steel wire and wire products - Organic coatings on steel wire - Part 5: Polyamide coated wire
UNE-EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
BS EN 50290-2-29:2016 Communication cables Common design rules and construction. Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
PREN 50290-2-29 : DRAFT 2016 COMMUNICATION CABLES - PART 2-29: COMMON DESIGN RULES AND CONSTRUCTION - CROSSLINKED POLYETHYLENE INSULATION COMPOUNDS: INSTRUMENTATION, CONTROL AND FIELD BUS CABLES
13/30276234 DC : 0 BS EN 15346 - PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
PREN 50290-2-35 : DRAFT 2016 COMMUNICATION CABLES - PART 2-35: COMMON DESIGN RULES AND CONSTRUCTION - POLYAMIDE SHEATHING COMPOUND
UNE-EN 15346:2015 Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
DIN EN 14035-33:2006-01 FIREWORKS - PART 33: SPINNERS - SPECIFICATION AND TEST METHODS
I.S. EN 13832-2:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 2: REQUIREMENTS FOR FOOTWEAR RESISTANT TO CHEMICALS UNDER LABORATORY CONDITIONS
I.S. EN 16265:2015 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - IGNITION DEVICES
05/30136487 DC : DRAFT JUL 2005 EN 15307 - ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLE-UPPER BONDS - MINIMUM STRENGTH REQUIREMENTS
13/30281393 DC : 0 BS EN 50290-2-23 - COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION
BS EN 16261-3:2012 Pyrotechnic articles. Fireworks, Category 4 Test methods
BS EN 71-13:2014 Safety of toys Olfactory board games, cosmetic kits and gustative games
DIN EN 14035-21:2006-01 FIREWORKS - PART 21: JUMPING GROUND SPINNERS - SPECIFICATION AND TEST METHODS
DIN EN 14035-20:2005-06 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
XP P05 010 : 2004 XP FLOOR COVERINGS - DETERMINATION OF SLIP RESISTANCE USING THE RAMP TEST
12/30254138 DC : 0 BS EN 15651-3 - SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
UNE-EN 71-1:2015 Safety of toys - Part 1: Mechanical and physical properties
BS EN 13696:2008 Wood flooring. Test methods to determine elasticity and resistance to wear and impact resistance
CEI 20-79 : 2009 ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 1: FINGERPRINTING AND TYPE TESTS FOR RESINOUS COMPOUNDS
14/30301109 DC : 0 BS EN 50180-2 - BUSHINGS ABOVE 1 KV UP TO 52 KV AND FROM 250 A TO 3,15 KA FOR LIQUID FILLED TRANSFORMERS - PART 2: REQUIREMENT FOR BUSHING COMPONENTS
EN IEC 62677-3-101:2018 Heat-shrinkable low and medium voltage moulded shapes - Part 3: Specification for individual materials - Sheet 101: Heat-shrinkable, polyolefin moulded shapes for low voltage applications
13/30293745 DC : 0 BS EN 50290-2-38 - COMMUNICATION CABLES - PART 2-38: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR COAXIAL CABLES
07/30164611 DC : 0 BS EN 15651-2 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 2: SEALANTS FOR GLAZING
PREN 50290-2-23 : DRAFT 2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - PE INSULATION
PREN 15346 : DRAFT 2013 PLASTICS - RECYCLED PLASTICS - CHARACTERISATION OF POLY(VINYL CHLORIDE) (PVC) RECYCLATES
DIN EN 14035-17:2004-11 FIREWORKS - PART 17: GROUND SPINNERS - SPECIFICATION AND TEST METHODS
PREN 1504-7 : DRAFT 2015 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
BS EN 16523-1 : 2015 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 1: PERMEATION BY LIQUID CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
UNE-EN 15651-2:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
BS EN 71-1 : 2014 SAFETY OF TOYS - PART 1: MECHANICAL AND PHYSICAL PROPERTIES
07/30163692 DC : 0 BS EN 15651-3 - SEALANTS FOR JOINTS IN BUILDING CONSTRUCTION - DEFINITIONS, REQUIREMENTS AND EVALUATION OF CONFORMITY - PART 3: SEALANTS FOR SANITARY JOINTS
EN 13832-3:2006 Footwear protecting against chemicals - Part 3: Requirements for footwear highly resistant to chemicals under laboratory conditions
UNE-EN 16263-4:2016 Pyrotechnics articles - Other pyrotechnic articles - Part 4: Test methods
UNE-EN 50290-2-35:2016 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
I.S. EN 14035-18:2005 FIREWORKS - PART 18: HAND-HELD FOUNTAINS - SPECIFICATION AND TEST METHODS
BS EN 15651-1:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways Sealants for facade elements
I.S. EN 16263-4:2015 PYROTECHNIC ARTICLES - OTHER PYROTECHNIC ARTICLES - PART 4: TEST METHODS
I.S. EN IEC 62677-3-101:2018 HEAT-SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES - PART 3: SPECIFICATION FOR INDIVIDUAL MATERIALS - SHEET 101: HEAT-SHRINKABLE, POLYOLEFIN MOULDED SHAPES FOR LOW VOLTAGE APPLICATIONS
I.S. EN 13832-1:2006 FOOTWEAR PROTECTING AGAINST CHEMICALS - PART 1: TERMINOLOGY AND TEST METHODS
I.S. EN 14035-8:2004 FIREWORKS - PART 8: BENGAL STICKS - SPECIFICATION AND TEST METHODS
I.S. EN 10245-5:2011 STEEL WIRE AND WIRE PRODUCTS - ORGANIC COATINGS ON STEEL WIRE - PART 5: POLYAMIDE COATED WIRE
UNE-EN 50290-2-37:2016 Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
UNE-EN 50548:2012 Junction boxes for photovoltaic modules
I.S. EN 14035-20:2005 FIREWORKS - PART 20: JUMPING CRACKERS - SPECIFICATION AND TEST METHODS
S.R. CEN/TS 16354:2013 LAMINATE FLOOR COVERINGS - UNDERLAYS - SPECIFICATION, REQUIREMENTS AND TEST METHODS
I.S. EN 60455-3-8:2013 RESIN BASED REACTIVE COMPOUNDS USED FOR ELECTRICAL INSULATION - PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - SHEET 8: RESINS FOR CABLE ACCESSORIES (IEC 60455-3-8:2013 (EQV))
PREN 50290-2-25 : DRAFT 2013 COMMUNICATION CABLES - PART 2-25: COMMON DESIGN RULES AND CONSTRUCTION - POLYPROPYLENE INSULATION COMPOUNDS
BS EN 115-1:2017 Safety of escalators and moving walks Construction and installation
I.S. EN 15649-1:2009 FLOATING LEISURE ARTICLES FOR USE ON AND IN THE WATER - PART 1: CLASSIFICATION, MATERIALS, GENERAL REQUIREMENTS AND TEST METHODS
EN 71-1:2014 Safety of toys - Part 1: Mechanical and physical properties
I.S. EN 15651-3:2017 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
14/30300917 DC : 0 BS EN 16759 - STRUCTURAL SEALANT GLAZING SYSTEMS (SSGS)
15/30327125 DC : 0 BS EN 1504-7 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 7: REINFORCEMENT CORROSION PROTECTION
NF EN 50548 : 2011 AMD 2 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
PREN 15651-3 : DRAFT 2012 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
PREN 50548 : DRAFT 2009 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
PREN 50290-2-34 : DRAFT 2016 COMMUNICATION CABLES - PART 2-34: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE SHEATHING COMPOUND FOR OUTDOOR OPTICAL FIBRE CABLES
BS EN 13832-1:2006 Footwear protecting against chemicals Terminology and test methods
I.S. EN 14035-4:2003 FIREWORKS - PART 4: BANGERS AND BANGER BATTERIES - SPECIFICATION AND TEST METHODS
EN 60684-3-247:2011/A1:2017 FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 247: HEAT-SHRINKABLE POLYOLEFIN SLEEVING, DUAL WALL, NOT FLAME RETARDED, THICK AND MEDIUM WALL (IEC 60684-3-247:2011/A1:2016)
DIN EN 1504-7:2015-09 (Draft) PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND EVALUATION OF CONFORMITY - PART 7: REINFORCEMENT CORROSION PROTECTION
DIN EN 13529:2003-12 PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - TEST METHODS - RESISTANCE TO SEVERE CHEMICAL ATTACK
UNE-EN 15468:2016 Laminate floor coverings - Elements with directly applied printing and resin surface layer - Specifications, requirements and test methods
BS EN 14294:2004 Adhesives for leather and footwear materials. Preparation of bonded test pieces by moulding-on processes
BS EN 14035-28:2004 Fireworks Roman candles. Specification and test methods
BS EN 10245-2:2011 Steel wire and wire products. Organic coatings on steel wire PVC finished wire
BS EN 14865-2 : 2006 RAILWAY APPLICATIONS - AXLEBOX LUBRICATING GREASES - PART 2: METHOD TO TEST THE MECHANICAL STABILITY TO COVER VEHICLE SPEEDS UP TO 200 KM/H
UNE-EN 295-4:2013 Vitrified clay pipe systems for drains and sewers - Part 4: Requirements for adaptors, connectors and flexible couplings
BS EN 15346:2014 Plastics. Recycled plastics. Characterization of poly(vinyl chloride) (PVC) recyclates
BS EN 14035-27:2003 Fireworks Rockets. Specification and test methods
EN 50548 : 2011 AMD 2 2014 JUNCTION BOXES FOR PHOTOVOLTAIC MODULES
CEN/TR 14548:2003 Adhesives - Guide to test methods and other standards for the general requirements, characterization and safety of structural adhesives
DIN EN 15651-3:2017-07 SEALANTS FOR NON-STRUCTURAL USE IN JOINTS IN BUILDINGS AND PEDESTRIAN WALKWAYS - PART 3: SEALANTS FOR SANITARY JOINTS
DIN EN 10310:2004-07 Steel tubes and fittings for onshore and offshore pipelines - Internal and external polyamide powder based coatings
EN 13529:2003 Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack
EN 60684-3-214:2014 Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall
CEN/TS 16165:2016 Determination of slip resistance of pedestrian surfaces - Methods of evaluation
EN 124-1:2015 Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions, classification, general principles of design, performance requirements and test methods
DIN EN 16523-2:2015-04 DETERMINATION OF MATERIAL RESISTANCE TO PERMEATION BY CHEMICALS - PART 2: PERMEATION BY GASEOUS CHEMICAL UNDER CONDITIONS OF CONTINUOUS CONTACT
DIN EN 14510:2005-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Determination of sole positioning tack (spotting tack)
DIN EN 14879-3:2007-02 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 3: Coatings on concrete components
EN 62631-3-1:2016 Dielectric and resistive properties of solid insulating materials - Part 3-1: Determination of resistive properties (DC methods) - Volume resistance and volume resistivity - General method
DIN EN 10245-2:2012-01 Steel wire and wire products - Organic coatings on steel wire - Part 2: PVC finished wire; German version EN 10245-2:2011
EN 10290:2002 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 10329:2006 Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings
DIN EN 10290:2004-08 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings
EN 62217:2013 Polymeric HV insulators for indoor and outdoor use - General definitions, test methods and acceptance criteria
EN 60544-2:2012 Electrical insulating materials - Determination of the effects of ionizing radiation on insulating materials - Part 2: Procedures for irradiation and test
EN 50290-2-23:2013 COMMUNICATION CABLES - PART 2-23: COMMON DESIGN RULES AND CONSTRUCTION - POLYETHYLENE INSULATION FOR MULTI-PAIR CABLES USED IN ACCESS TELECOMMUNICATION NETWORKS: OUTDOOR CABLES
DIN EN 14879-5:2007-10 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 5: Linings on concrete components
DIN EN 10289:2004-08 Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings
DIN EN 10329:2006-04 STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS
EN 50290-2-38:2016 Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
DIN EN 14354:2017-11 WOOD-BASED PANELS - WOOD VENEER FLOOR COVERINGS
EN 60455-2:2015 Resin based reactive compounds used for electrical insulation - Part 2: Methods of test
EN 50290-2-35:2016 Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
EN 50617-1:2015 Railway applications - Technical parameters of train detection systems for the interoperability of the trans-European railway system - Part 1: Track circuits
UNE-EN 15434:2007 Glass in building - Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)
BS 2782-3.365C(1992) : 1992 AMD 10694 PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS

AS 1735.5.1:2019 Lifts, escalators and moving walks Safety of escalators and moving walks - Construction and installation (EN 115-1:2017, MOD)
ISO 291:2008 Plastics Standard atmospheres for conditioning and testing
EN ISO 291:2008 Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
ISO 48:2010 Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD)

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.

Get in touch with us